The same tools in different views

in my application there are 4 views and i have the same scrollView on buttons. i wonder is it possible to use them like in websites.i mean it will be header under the navigationBar and it will work in the same way in all views. like in websites.it is hard to send some datas always when the scrollview is used. so is it possible to use just one scrollview in all views. 

Just got iMovie 6 and it seems intimidating with the new themes!
Then don't use the themes!
Option-drag the clip to make a copy at a new position.
See the iMovie tutorials (in html and QT movie form) at:
http://www.apple.com/support/imovie/
(Scroll down a bit)
See the iMovie tutorials (in pdf form) at:
http://manuals.info.apple.com/en/iMovieAtAGlance.pdf
http://manuals.info.apple.com/en/iMovieHDGettingStarted.pdf
http://manuals.info.apple.com/en/iMovieLesson1.pdf
http://manuals.info.apple.com/en/iMovieLesson2.pdf
http://manuals.info.apple.com/en/iMovieLesson3.pdf
http://manuals.info.apple.com/en/iMovieLesson4.pdf
http://manuals.info.apple.com/en/iMovieLesson5.pdf
http://manuals.info.apple.com/en/iMovieLesson6.pdf
http://manuals.info.apple.com/en/iMovieLesson7.pdf

Similar Messages

  • How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?

    With Acrobat 6.0 I was able to copy a stamp in the same position (I mean "exactly" the same one) of different pages just by using the "copy/past" tool.
    Now I am using Acrobat XI and it seems like it is not possible anymore: I am copying a stamp and I am trying to past it in anoter page, but it appears in the center of the page (or wherever it wants to...).
    Does anyone have a solution?
    Thanks in advance.

    Thank you very much. I'll be waiting for you message.
    Messaggio originale----
    Da: [email protected]
    Data: 26/01/2015 17.56
    A: "Umberto Gangi"<[email protected]>
    Ogg:  How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        How can I use the "Copy and paste" tool in order get stamps in the same position in different pages (Acrobat XI for PC)?
        created by Gilad D (try67) in Creating, Editing &amp; Exporting PDFs - View the full discussion
    Well, I was in the same situation so I've developed a tool that allows one to do it. I will send you some additional information about it in a private message.
         If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7132586#7132586 and clicking ‘Correct’ below the answer
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7132586#7132586
         To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, &amp; "Stop Following"
         Start a new discussion in Creating, Editing &amp; Exporting PDFs by email or at Adobe Community
      For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • OBIEE report based on same criteria but different view based on filter

    Hi,
    I am trying to create a report in OBIEE 11.1.1.5 where In the same report using the same criteria, I can have different views which applies different filter.
    Suppose, I have a report criteria as
    Dim1, Dim2, Measure1, Measure 2.
    I want to create two pivot view based on the same data.
    One view will be showing data Dim1="Value1". The other view is duplicate of this view but will show data Dim1="Value2".
    Is it possible in OBIEE?
    basically what I want is work on the same dataset but different representation and show them in the same report. Please share your opinion.
    Regards,
    Tanveer.

    Hi,
    You create a new dim dummy column in criteria and in presentation level create new pivot table view use this dummy dimension column and filter with dim1=value2.
    give updates on this.
    Mark if Helpful/correct.
    Thanks.

  • How can i share photos on the same mac but different users?

    how can i share photos on the same mac but different users? we have different iphoto acounts and just want to be able to look under users in the finder and view another users iphoto.

    You may try moving ur librarie to the folder /Users/shared if and link it to iphoto from there
    You may locate and link libraries from arkiv-->change library in iphoto

  • How to use the same component in different applications

    Hi All,
    I need to use the same component in different applications. i.e In opportunity, Quotation & Promotion.
    The Search help view in the component PRD01QR should be used in all these components but with different search criteria.
    With help of the DO_determine_configuration, different view configurations are possible but Different search criteria is not possible.
    for Eg. search parameter without DDLB, F4 options in another components.
    How can I control the behavior of the search view in different applications with restricting the field properties?
    Is it possible to find out where and in which component these search_help_search component is used?

    Hi Harry,
    Is it possible to find out where and in which component these search_help_search component is used?
    ans: I am giving an Example for your question go through that u might get clear about this.
    Ex: BT115IT_SLSO  sales order component
    below screen they component usage using for populate the product search component.
    please let me know any help required .
    Regards,
    vishwa.

  • Multiclip on FCP 7 with timecode: multiple files for the same camera have different Angle

    I have FCStudio 7 with OS 10.6.8
    I just filmed a concert with 6 cameras (Sony XDCAM).  They are all timecode sync'd.
    For various reasons there are multiple vid files for each camera (i.e. 172_003 thru 172_006 for camera 1).
    I imported into FCP 7 using SonyXDCAM plug in with no problems.  Each camera file group was given its camera number as the Reel Name (i.e. Camera 1) and that camera's number as its Angle Name (i.e. 1).
    Now when I try and create a multiclip using all six cameras, instead of keeping all the files for a specific camera under a single angle name it treats each file as its own camera angle.  It treats each file as an individual camera instead of having the files flow as a single clip from a single camera based on their timecode.  In viewer I have 8 different angles for a single camera (because of 8 files).  In the make media window for multiclip, the Angle Name is different for each clip but its position is still aligned to its timecode.
    I worked the same project last year and the multiple files for each camera lined up fine, based on its timecode value and camera/reel name.  I can't see what has changed.
    I need each camera's files to sync under that camera Angle Name, and for the files to play in the same angle spot in viewer.
    All advice welcomed as I'm in a major time crunch to complete the job.
    Thanks.

    Well why not just prebuild each angle in its own sequence with sequence timecode matching the source timecode?  Export with current settings and import these files back into fcp and then create your multiclip. 

  • We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

    we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
    Appreciate your support and if possible , how to do this?

    If you want to work with Mac OS X, you need one computer per simultaneous user.
    What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
    Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

  • SSDT Schema Compare keeps showing the same objects as different..

    Hi, 
    When comparing a database to my project using Visual Studio 2012 SSDT I get several stored procedures marked as changed. The body of the procedures is identical, but two properties are highlighted as different when expanding the object:
    IsSelf (false on the DB vs true on the project) and User  (dbo on the DB, needs to be added to the project).
    The procedures have the option "with execute as self" both in the database and in the project as part of the body.
    I have not found what needs to be done so these differences are applied to the project and never appear again. Tried changing some options on the schema compare but didn't found one that help. 
    Some forum suggested dropping the objects and re-creating them but I don't want to loose the history of changes on TFS.
    Any suggestions? 

    Hi Daniel,
    Since you have posted this issue to the SSDT forum here:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/5c9c5c47-64ac-4af4-9104-c9500dc8cf52/ssdt-schema-compare-keeps-showing-the-same-objects-as-different?forum=ssdt#5c9c5c47-64ac-4af4-9104-c9500dc8cf52
    I will move this thread to the Off-topic forum, thanks for your understanding.
    Sincerely,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Howto block p2p traffic of clients connected to the same ssid on different wlc

    Hi all,
    I use two wlc 4400 (4.2.x version) with a mobility domain and one ssid, both wlc are connected to a cisco l2 switch infrastructure. On the wlc I use the p2p blocking action 'drop' (http://www.cisco.com/en/US/docs/wireless/controller/5.2/configuration/guide/c52wlan.html#wp1209597) to isolate the clients from each other. Does anybody know if only unicast traffic is blocked or also multicast and broadcast traffic like arp requests?
    Concerning blocking p2p traffic of clients connected to the same ssid but different controllers I found the following statement in the LAP FAQs (http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a00806a4da3.shtml):
    ===
    Q. In autonomous APs, Public Secure Packet Forwarding (PSPF) is used to avoid client devices associated to this AP from inadvertently sharing files with other client devices on the wireless network. Is there any equivalent feature in Lightweight APs?
    A. The feature or the mode that performs the similar function of PSPF in lightweight architecture is called peer-to-peer blocking mode. Peer-to-peer blocking mode is actually available with the controllers that manage the LAP. If this mode is disabled on the controller (which is the default setting), it allows the wireless clients to communicate with each other through the controller. If the mode is enabled, it blocks the communication between clients through the controller. It only works among the APs that have joined to the same controller. When enabled, this mode does not block wireless clients terminated on one controller from the ability to get to wireless clients terminated on a different controller, even in the same mobility group.
    ===
    Does anybody know what's the best practise to prevent this inter wlc client traffic? I already read about using acls on the wlc dynamic interfaces, or private vlans on the l2 switch vlans where the dynamic interfaces are connected to. Is it allowed to completely isolate the wlc from each other on these dynamic interfaces with acls or private vlans or do the wlc need to see each other on this interfaces (e.g. heart beat)?
    Many thanks in advance,
    Thorsten

    Hi Sasha,Thorsten
    The bug is Junked and I believe which is what you are running into with your tests:
    CSCtr60787    WLC P2P Blocking Set to Forward-UpStream Doesn't Work.
    Bugtoolkit : http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
    To answer your original query :
    ACL is only solution to block client communication on same ssid between 2 wlcs. 5508 works better with ACLs then 44xx platform.
    ARP requests will be forwarded to upstream router just like any other traffic. WLC won't proxy arp for clients on same vlan.
    Gateway arp's I believe should be handled by WLC . ( Don't quote me on this but I am pretty sure it is ) ..If it was not, then how would client know about gw ?
    Multicast traffic is not applicable for p2p.
    Your ACL can be as simple as this for the scenario :
    WLC 1 - clientvlan = 10
    WLC 2 - clientvlan = 10
    and you want to restrict users from wlc1-wlc1, wlc1-wlc2, wlc2-wlc2 for same vlan10.
    Basically in that case the ACL should look like on both WLCs :
    1. Permit statement to talk to gateway.
    2. Deny to subnet.
    3. Permit all.
    4. If DHCP/DNS other services are on same subnet then you would need to add a permit
    statement before the deny.
    5. Attach the ACL to SSID or dymanic interface.
    Thanks..Salil
    CSCtr60787    WLC P2P Blocking Set to Forward-UpStream Doesn't Work.

  • How can I let firefox save usernames/passwords for multiple subdomains that use the same username but different passwords?

    on a particular website that has sub domains I have multiple accounts with the same name but different password. Firefox seems only able to save one of them, because they are on the same site.

    "Things"?  What things?  Apps for keeping track of when to change cat litter?  30 different versions of "twinkle, twinkle little star" played by everything from punk rockers to Gregorian chant?  Videos on the best way to make Christmas cake?

  • Hi,  I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.

    I backed up my ipad and iphone on the same computer, will it be shown on the same folder or different? Mine is window 7, try to find the back up file follow the step that apple provided, it shown only iphone instead of ipad. Pls help.

    What do you see under Edit > Preferences > Devices?
    tt2

  • I downloaded pages from the app store and I can use it on my Mac login but it doesn't show up when my wife logs in to her account? Were using the same computer, just different logins.

    I downloaded pages from the app store and I can use it on my Mac login but it doesn't show up when my wife logs in to her account? Were using the same computer, just different logins.

    No. You need to buy it for your Apple ID and for the other. You will have problems with updates

  • 1 app, 3 devices, 1 iCloud - how can I run the same game on different devices?

    My wife and I share one iTunes account and one iCloud account for 2 iPhone 5's and an iPad.  Our home laptop is a PC running windows 7.  We are not able to both play the same game (specifically Carcassone) at the same time on different devices which is frustrating, how can I make this happen?  Do I need two separate accounts?  Can I have two accounts with a PC?  We don't want to sacrifice the photostream to get it though.
    Thank you,
    Jacob

    Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
    When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
    Therefore, remembe the passcode that you enter this time.
    It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

  • HT3819 How do I share my itunes library with my mother on the same computer, but different accounts?

    How do I share my itunes library with my mother on the same computer, but different accounts?
    My mother and I share a desktop computer (apple) and we have seperate itunes accounts. How do we share accounts?

    iTunes Home Sharing now works between users on same computer - https://discussions.apple.com/thread/3865597
    You could set up two completely separate libraries and share music via Home Sharing.
    iTunes: How to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - relocating iTunes' media folder to a shared area but leaving separate library files - extra tip at https://discussions.apple.com/message/17331189
    Chris CA's instructions on sharing one iTunes music library between multiple user accounts - https://discussions.apple.com/message/8974074 - Multiple users using a single library file - similar post at: https://discussions.apple.com/thread/3753008
    Suggestion by Turingtest for multiple users and one library - http://discussions.apple.com/message/9117622 - use smart playlists and tags to isolate groupings.
    Discussions on using purchases from multiple AppleIDs in one iTunes library - https://discussions.apple.com/message/19543804

  • HT2905 I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    I have multiple album titles of the same name with different artists. How can I get them to go under one album title again?

    In iTunes(on a Mac or PC) just tap on 'Albums' rather than 'Artists' and you'll see them all together.
    You may find that there are songs mislabelled. In which case right tap on the Album or Artist and tap 'Get Info', then change to the correct name and the songs will join the rest of the songs for that Artist or Album.
    Then resync with your iPhone and all will be well.

Maybe you are looking for