The SAProuter service failed to start due to the following error:

I installed the SAP router 710 on windows server 2003 NON_SAP SYSTEM. I installed it successfully using the command:
>ntscmgr install SAProuter -b c:\saprouter\saprouter.exe -p "service -r"
But when trying to start the service I am facing this error:
"SAP router service failed to start due to the following error: This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem".
I removed and reinstalled it, but again when trying to start the service facing the same error.
Plz help me in resolving this issue and also let me know using which user I need to start the SAPRouter Service(Local System Account or any other account) . Do the needful as the matter is urgent
Thanks in advance
Ali

Hi Anil,
The version that I am using to install is SAP Router 710 on windows 2003 x64, I have to installed the SAP router on non SAP System.
now when I am trying to start the service, it is giving an error as mentioned above.
Plz help
Regards
Ali
Edited by: Mirza Munnawar Ali Baig on Jun 2, 2008 3:48 PM

Similar Messages

The srvnet service failed to start due to the following error: srvnet is not a valid Win32 application.

Hi,
I've got big problem with Win Srv 2008 Enterprise sp2, after instalation of some updates (i suppose) server services don't starting, all depend on srvnet: srv, srv2, what can i do ?

thx for answer,
sfc has found some problems, full CBS.log has 12MB, some about svrnet.sys below, "Cannot repair member file", i'm getting worried ...
2012-01-11 12:41:01, Info                  CSI    0000014a [SR] Verify complete
2012-01-11 12:41:02, Info                  CSI    0000014b [SR] Verifying 100 (0x00000064) components
2012-01-11 12:41:02, Info                  CSI    0000014c [SR] Beginning Verify and Repair transaction
2012-01-11 12:41:04, Info                  CSI    0000014d Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.0.6002.18462_none_057dce720d7c3240\srvnet.sys
do not match actual file [l:20{10}]"srvnet.sys" :
Found: {l:32 b:WSoCr6lSURy/v1tM9GeBcCx9EGnrY18g4sx9SeboQZk=} Expected: {l:32 b:g6d+MQBLz4NEPzDvwpDgS7Gi8zLo39YUq24ltSfJIpk=}
2012-01-11 12:41:04, Info                  CSI    0000014e [SR] Cannot repair member file [l:20{10}]"srvnet.sys" of Microsoft-Windows-SMBServer-Common, Version
= 6.0.6002.18462, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-01-11 12:41:06, Info                  CSI    0000014f Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.0.6002.18462_none_057dce720d7c3240\srvnet.sys
do not match actual file [l:20{10}]"srvnet.sys" :
Found: {l:32 b:WSoCr6lSURy/v1tM9GeBcCx9EGnrY18g4sx9SeboQZk=} Expected: {l:32 b:g6d+MQBLz4NEPzDvwpDgS7Gi8zLo39YUq24ltSfJIpk=}
2012-01-11 12:41:06, Info                  CSI    00000150 [SR] Cannot repair member file [l:20{10}]"srvnet.sys" of Microsoft-Windows-SMBServer-Common, Version
= 6.0.6002.18462, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-01-11 12:41:06, Info                  CSI    00000151 [SR] This component was referenced by [l:152{76}]"Package_5_for_KB2536275~31bf3856ad364e35~x86~~6.0.1.2.2536275-14_neutral_GDR"
2012-01-11 12:41:06, Info                  CSI    00000152 Hashes for file member \??\C:\Windows\System32\drivers\srvnet.sys do not match actual file [l:20{10}]"srvnet.sys"
Found: {l:32 b:WSoCr6lSURy/v1tM9GeBcCx9EGnrY18g4sx9SeboQZk=} Expected: {l:32 b:g6d+MQBLz4NEPzDvwpDgS7Gi8zLo39YUq24ltSfJIpk=}
2012-01-11 12:41:06, Info                  CSI    00000153 Hashes for file member \SystemRoot\WinSxS\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.0.6002.18462_none_057dce720d7c3240\srvnet.sys
do not match actual file [l:20{10}]"srvnet.sys" :
Found: {l:32 b:WSoCr6lSURy/v1tM9GeBcCx9EGnrY18g4sx9SeboQZk=} Expected: {l:32 b:g6d+MQBLz4NEPzDvwpDgS7Gi8zLo39YUq24ltSfJIpk=}
2012-01-11 12:41:06, Info                  CSI    00000154 [SR] Could not reproject corrupted file [ml:520{260},l:62{31}]"\??\C:\Windows\System32\drivers"\[l:20{10}]"srvnet.sys";
source file in store is also corrupted
2012-01-11 12:41:07, Info                  CSI    00000155 Repair results created:

The saposcol service failed to start.

Hi everyone:
- We have detected that in our production database system there are two error messages:
1. The saposcol service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
EVENT ID: 7000
And
2. Timeout (30000 milliseconds) waiting for the saposcol service to connect.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
EVENT ID: 7009
- Both of them have as source the Service Control Manager.
The database system is a Windows cluster where the portal SCS are running with Oracle 9.2.0.5. The OS is a Microsoft Windows Server 2003 Enterprise Edition.
The path to the executable saposcol.exe is:
C:\WINNT\SapCluster\saposcol service
We have tried to uninstall and install the service as in note 82751 (through the windows services window), and the service saposcol is started, but these two errors steel appear.
We have the same structure at Test system and saposcol works properly. We thought if it could be possible that the overloading of the production system was causing a delay in the start of the saposcol service, and then the timeout is reached. Is it possible to increase this timeout, and in this case, will this solve the problem? (if so, how do we do increase it, and in which manner will affect our system?)
Thanks and regards,
Jose Sorli Esteve

hi,
install the saposcol service with administrator account
and change the logon from nt service manager to SAPService<SID> user
if it not works downlod the new one from sap service place
and re install it
regards,
kaushal

Hive_1074 the integration service failed to start hive session

i am using Informatica 9.6.1 BIG Data Edition developer tool.I am trying load data from hive to hive database table, I am able to import and view data from hive database, but when mapping run it got failed. Below error message captured at mapping log. Error: Exception Class: [com.informatica.sdk.dtm.ExecutionException] Exception Message: [[HIVE_1070] The Integration Service failed to run Hive query [exec0_query_1] for task [exec0] due to following error: Hive error code [1], Hive message [FAILED: Execution Error, return code 1 from org.apache.hadoop.hive.ql.exec.mr.MapRedTask], Hive SQL state [08S01].]. Could please any one reply for this issue. Thanks&regards,Sivaji

Hi all, i am new for informatica Big data edition(BDE). I am trying to load data into hive table, the mapping is running long time in informatica Developer tool. i am not able to understand why it is running long time.administrator service log shows error message as "hive_1074 the integration service failed to start hive session", Please look attached error message screenshot.Before this error message i got below error so i configured inormatica home directory at data integration service.[HIVE_1108] The Informatica home directory property [Informatica Home directory] for the Hadoop node is not configured.Configure the property for the Integration Service. Please help on current issue. Thanks in advance. Rgards,Sivaji

The workflow failed to start due to an internal error

My approval workflow never work in my machine before. It was a newly installed machine. when i start the Approval workflow, it stated "The workflow failed to start due to an internal error'. What other circumtances might lead to this problems?or you can email me @ [email protected]

hi
Finally it worked for me after reinstalling the features on the site collection. deactivating and reactivating didnt help. once i uninstalled and re installed them it worked.
Here are the steps i performed.
OffWFCommon
stsadm -o deactivatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
stsadm -o uninstallfeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -force
ExpirationWorkflow
stsadm -o deactivatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
stsadm -o uninstallfeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -force
ReviewWorkflows
stsadm -o deactivatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
stsadm -o uninstallfeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -force
SignaturesWorkflow
stsadm -o deactivatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
stsadm -o uninstallfeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -force
translationWorkflow
stsadm -o deactivatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force
stsadm -o uninstallfeature -id C6561405-EA03-40A9-A57F-F25472942A22 -force
install & activate
OffWFCommon
stsadm -o installfeature -name offwfcommon -force
stsadm -o activatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
ExpirationWorkflow
stsadm -o installfeature -name Expirationworkflow -force
stsadm -o activatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
ReviewWorkflows
stsadm -o installfeature -name ReviewWorkflows -force
stsadm -o activatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
SignaturesWorkflow
stsadm -o installfeature -name SignaturesWorkflow -force
stsadm -o activatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
TranslationWorkflow
stsadm -o installfeature -name Translationworkflow -force
stsadm -o activatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force

Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).

Windows 7 users in my domain are unable to configure or change backup settings. Users are able to open Control Panel > Backup and Restore, but when they click
Change settings, they receive the error: Windows Backup - The backup application coud not start due to an internal error: You must be logged on as an administrator to perform this task. (0x8100000010).
The same error is received when executing sdclt.exe /configure at the command prompt, regardless of whether the command prompt is launched using "run as administrator".
I've done significant testing, and have been able to determine that the local administrator account is able to configure backups before the computer is joined to the domain. Once the computer is joined to the domain, the local administrator account
and domain users who are in the local administrators group are no longer able to configure backup and restore. Domain administrators are able to configure backups.
This is a new issue, which began occuring sometime in the last 2 months. 3 months ago, users were able to configure backups without issue, and those computers with backups configured are still able to run their backups and do restores; however the
settings can no longer be changed.
Clearly something in the domain is doing this, but Group Policy has not been altered, and I can find no setting that would be doing this in any case. Any help is appreciated.

Hi,
So you mean you have tried different accounts in the local Administrator group and all of them failed?
If so, please check what group the local Administrator group belongs to? Does it belong to a group with limited privileges, such as the Guests group?
Tim Quan

Administrator software failed to start due to an unexpected error

Not a terribly useful message from ARD after a fresh install of 10.5.3:
"The Remote Desktop Administrator software failed to start due to an unexpected error."
"The Remote Desktop software may not be installed correctly or the computer may require a restart"
It installed something in the system on first launch then popped up with this message. My main concern is that it pooched my system in the process by replacing something new in Mac OS X 10.5.3 with something old from ARD 3.2...
Restarting now but who knows, might not be back for a while... %-\

Kill the "ARDAgent" program, either in Activity Monitor or Terminal, and it will start back up again. When you see it running again(make sure it's a new instance via the PID), you should be able to start Remote Desktop up without any problems after that.

The Remote Desktop administrator software failed to start due to an unexpected error...

Hi all...
Suddenly, I'm getting this error message when I try to open ARD. It was working a week ago and I'm not aware of changing anything. Any advice?
This is the 3.6.1 version of the ARD admin and I have the 3.6.2 Client installed (that was the way it was before, too, when it was working).
Note: I did try a fix from the forums that was posted in 2009, which required deleting the ARDAgent from the RemoteManagement folder in System/Core Services... and then reinstalling again using the Apple ARD Admin download for same. It worked for one run of the program, then the error came back.
What do you guys think?

bcvanbelle wrote:
Updated from 10.5.1 to 10.5.2. System seemed slow at first, noticeable keyboard lag and otherwise sluggish. Noticed that Remote Desktop no longer worked. Installed Graphics update. No more typing lag and speedier performance. Remote Desktop still dead.
Error message:
The Remote Desktop Administrator software failed to start due an unexpected error.
Hmphf.
You may have to reinstall the Remote Desktop SW. See if that helps.
I don't think it's a coincidence that this update "fixed" the Remote Desktop SUID warning, and it also removed the potential update from my computer which I had placed on "Ignore" since I did not need it and did not need the warning, either. So there is a connection between this update and the Remote Desktop SW.

Is there a solution to the 'iPod Service failed to start' install problem?

Like a lot of people, I have this problem that when I try to install iTunes 7 on Windows I get this error at the end:
Service 'iPod Service' (iPod Service) failed to start. Verify that you have sufficient privileges to start system services.
I tried various methods to solve this and none of them worked.
Is there finally a solution from Apple regarding this issue?
I am about to purchase an iPod Classic and this is a major drawback for me.

Methods that I already tried (that I can remember):
1. Uninstall iTunes + QuickTime and delete everything from the hard drive that's related to apple, including the registry, used CCleaner and install iTunes 7.5 - didn't work.
2. run msconfig, disable all services (with MS services hidden) and startup apps, restarting and trying to install it again - didn't work.
3. Trying to start the service manually with services.msc during the installation when the error appears - gives me an error.
I did manage to install iTunes 7.0.2 (from OldVersion.com) and I tried to install iTunes 7.5 on top of it with the same results.

The service did not start due to the following error: The repository at this location is called rep_bkd_dev. Check the log for more information.

Experts, I created repository first with the name of rep_bkd_dev (Unicode),Then my lead told that we need to create RS with MS Latin,So am trying to creating a new repository with the name of dev_repository and it is showing the below error.Can some one help me out here. Regards,

hi I want to create a file with muiltple header detail and trailorSample of my file 1F99500094959 5F99000000999911025F99000000999912025F99000000999913029F99500094959 1G83341002729803 5G83000000999918020109G83341002729803 1G83910377940 5G830000009999190201011050003522029G83910377940 T20110720000000900000006750{ In this file 1 is header and 5 is detail and 9 is trailer and in last T segment is also trailerI have any idea to create seperate 3 files and in lastconcatenate all file with the help of unixbut in my case data is so large (in millions) this approach is not use full please suggest my any ideaHow to create VSAM file

EPM 11.1.2 - epmsystem Configuration Manager service fails to start

OracleEpmSystemc_oracle_middleware_user_projects_epmsystem1ConfigurationManager fails to start. I do not know how I am getting affected because everything else works fine. I have Essbase , Studio, Planning, EAS installed and all of them work fine. Do not know why this service fails. This is a fresh install of EPM 11.1.2 on windows 2003.
The Event Viewer says "The OracleEpmSystemc_oracle_middleware_user_projects_epmsystem1ConfigurationManager service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion. "
Thanks
Edited by: 823489 on Dec 24, 2010 6:25 AM

Hi,
have you found a fix for this ?
I'm getting the same error.
Thanks,
Cyril

[865PE/G Neo2 Series] How to correct "Parallel port driver service failed to start"?

I recently disabled the parallel port in the BIOS (I wasn't using it anyway) to try and free up an IRQ or some system resources, when I installed a firewire controller (which I wanted to have its own IRQ if possible). Then I periodically started getting this error "The Parallel port driver service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it." I Googled this, but any info I found either was not applicable or was in incomprehensible techspeak. I couldn't figure out how to prevent the error from occurring, so for the time being I re-enabled the parallel port in the BIOS--disabling it didn't free up any IRQ's anyway. I would like to know more about this, however. Is there a proper way to go about disabling the parallel port so that this error does not occur?
Should it be done before installing Windows? What are the advantages and disadvantages of disabling the parallel port, other than freeing up IRQ's (as I said, it didn't--unless this also happens only upon Windows install?). Gurus, please respond!

That was the first thing I tried. There is nothing called "parallel port service", nor is there any mention of the parallel port in any of the services listed. I don't know if it is even using any system resources, anyway. The ECP Printer Port always had a box checked that said "never use an interrupt" anyway. It has no conflicts or sharing. Maybe I should leave it alone. It's just that people always mention disabling it in order to free resources.

PowerCLI service failed to start

I'm unable to start my benchmark due to the PowerCLI service failing to start. This is the error I'm getting:
VMmark2 PSfe 1.2
Increased PowerCLI Service Delay : 5 : 5
Starting Up VMmark2PS Workers :   Increased delay(5) : Started 4
Loadtime = 00:00:18.84
Polling Workers State ::
   1 : Error!
   3 : Error!
   5 : Error!
   7 : Error!
Error Initializing Workers
Errors Found : 4
Workers Ready : 0
Error Initializing Workers (4) : Halting Workers : Purging Qs : Done
I've found this similar issue on another thread, but it doesn't seem to apply to my situation: VMmark2 PowerCLI Service Failed to Start :: Workers Ready:0

Try and increase the "RMQ_PowerCLI" and "RMQ_WorkerDelay" inside VMMARK2.CONFIG .
     RMQ_WorkerDelay=60
     RMQ_PowerCLI_Delay=120
If this still fails, please zip up and send C:\vmmark2\tmp directory from Prime Client.
Regards,
Fred

Itunes 8 - ipod Service failed to start

Hello,
Got the ipod service failed to start message appear when I upgraded to 8, managed somehow to get it working, this morning when I was prompted to upgrade to 8.01 it came up again and will not load so I have no itunes.
Help anyone? Thanks

I hate to piggy back post but this still isn't answered and I have the same problem.
I try to connect my iPod to my desktop and the comp reads it as a disk but every time in iTunes it comes up with the iPod Service Module failed to start (or something). On my laptop it reads it just fine and as much as I could us my laptop instead of my desktop, I don't want to. Any help anyone?
Oh. I have also un-installed and re-installed multiple times, and I don't have any third party software on my iPod. Any help would be much appreciated.

"The TestStand service did not start up promptly"

I have a LabView Operator Interface startup problem with TS 4.1. If
the OI is started immediately after system boot the operator may get apopup error from TestStand:
"The TestStand service did not start up promptly"
The
TestStand Service has a dependency on RPC so if either does not startup
before the operator launches the OI, he gets the message. If he
dismisses the message there is no further error i.e. the software
continues to work OK.
The real problem is the end user does not like this message and wants it removed.
Any suggestions how I can get rid of this message?
Only ideas I can see at the moment - either to have some kind of
delay timer on startup (this would need to be around 1-2 mins after
boot
on the system in question to stop it happening) or perhaps some LabView
code to poll the status of the TestStand service somehow so that we
wait for service to start before the OI communicates with testStand -
and thus the
popup does not occur.

The service should not normally take any significant amount of time to startup. There are some issues with service startup that we have noticed in some cases, but I don't remember the details. I will try and find out and get back to you. In the meantime, or as a possible solution, you can use the Windows SDK to check the status of the service and to wait until it is running. I'm not sure if the following can be directly translated into LabVIEW dll calls, but it would definitely be possible to create a C/C++ dll with the following code in it and call it from LabVIEW (If you do not have access to a C/C++ compiler and/or would like me to, I can probably build a dll with this code in it for you):
int MakeSureServiceIsRunning(void)
    SERVICE_STATUS serviceStatus;
    SC_HANDLE hService = NULL;
    SC_HANDLE hSCM = NULL;
    // Put variable into a good initial state for return value.
    serviceStatus.dwCurrentState = SERVICE_START_PENDING;
    hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
    if (hSCM == NULL)
        goto Error;
    hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
    if (hService == NULL)
        goto Error;
    do
        if(!QueryServiceStatus(hService, &serviceStatus))
            goto Error;
        if(serviceStatus.dwCurrentState != SERVICE_RUNNING)
            Sleep(100); // don't just do busy waiting, give up cpu time to other threads.
    while(serviceStatus.dwCurrentState == SERVICE_START_PENDING);
Error:
    if (hService != NULL)
        CloseServiceHandle(hService);
    if (hSCM != NULL)
        CloseServiceHandle(hSCM);
    if (serviceStatus.dwCurrentState == SERVICE_RUNNING)
        return 1;
    else
        return 0; // An error occurred, or service is in an unexpected state.
Or alternatively, if you want to do the polling inside of LabVIEW you could just do the following in the C/C++ dll:
int GetTestStandServiceStatus(unsigned int *serviceStatusReturnResult)
    SERVICE_STATUS serviceStatus;
    SC_HANDLE hService = NULL;
    SC_HANDLE hSCM = NULL;
    hSCM = OpenSCManager(NULL, NULL, SC_MANAGER_CONNECT);
    if (hSCM == NULL)
        goto Error;
    hService = OpenService(hSCM, "National Instruments TestStand Service", SERVICE_QUERY_STATUS);
    if (hService == NULL)
        goto Error;
    if(!QueryServiceStatus(hService, &serviceStatus))
        goto Error;
    *serviceStatusReturnResult = serviceStatus.dwCurrentState;
    CloseServiceHandle(hService);
    CloseServiceHandle(hSCM);
    return 1; // success
Error:
    if (hService != NULL)
        CloseServiceHandle(hService);
    if (hSCM != NULL)
        CloseServiceHandle(hSCM);
    return 0; // An error occurred. Perhaps TestStand service isn't registered.

The SAProuter service failed to start due to the following error:

Similar Messages

Maybe you are looking for