The save failed due to out of memory or disk space?

What does this mean? I have a paper to right as well as other task that I must complete. This popped up while I was trying to save a file through Microsoft word.

Google "The save failed due to out of memory or disk space? Mac"
http://ask.metafilter.com/214916/Bring-back-the-doc
http://texmylife.blogspot.com/2012/06/save-failed-due-to-out-of-memory-or.html
There are more google matches, so if these do not help, then you might try the google search. Also this appears to be a Word issue, so maybe the Microsoft forums would be a good place to explore

Similar Messages

Not enough memory of disk space in Word?

I am currently working on document in Word, it is only three pages long and has seven other photos in the document. When copy and pasting photos from iphoto I get the message that 'there is not enough memory or disk space to complete the operation.' What am I doing wrong? This didnt happen on my desktop Mac. Any help would be greatly appreciated.

"There is not enough memory or disk space to complete the ...

TS3694 Why is my i-tunes freezing up and is accompanied by a message "Saying Itunes can't save anything due to lack of memory and my system is equiped with 16gb?

I Have always used Itunes for my music and for reasons beyond me Itunes has been freezing up and lately it has bringing a mate that reseambles a normal Windows error message but it's telling me that Itunes has to close and the program can't save anything due to lack of memory ? So I updated the program to Version 10.6 last night and while downloading songs and album artwork Today it froze up an brought his mate the message back. And Yet my Laptop is as tooled up as well as a bovver boy on his way to a riot With 16gb of ddr3 plus 2 x Nvidia Gtx 580m's In Sli. So by rights any type of multimedia should run as smooth as silk and i never thought i would have a program make use of 16gb of ram all by itself. So if anybody has been through it an come out on top instead of passing Itunes over for another program and can give any advice or a hint would be much Appreciated... Thanks to Anybody listening....

Becasue something got corrupted on the iPod. It happens sometimes. Just restore the iPod to factory settings/new iPod and then try restoring from your backup.

Printing error due to out of memory condition...

hi i got this problem of "printing error due to out of memory condition" and i cannot save it as a pdf file too. How to solve this prob? i using cs3 and acro 9.. pls help me... got a proj due and cannot afford to waste too much time...

I've also seen this error message for the first time today "printing error due to out of memory condition" - I have 2GB of RAM, 300Gb+ free on my hard drive and have closed all other programs that were using some memory, however have had no problems printing to pdf ever before in Indesign... is there a solution to this problem?

Error due to out of memory condition

Hi,
system: Windows XP, 2 GM RAM, Indesign CS3
I placed two files in Indesign: the first is .ai (1.1 MB, probably exported form a CAD program), the second is .psd (53 MB). When I try to print to .ps file, Indesign displays the message: "Export error: error due to out of memory condition". If I: 1. export to PDF, everything is OK, 2. rasterize .ai in Photoshop, then import the resulting .psd to Indesign, print to .ps file is OK.
Does somebody has an answer to my problem?

My gues is "mistakes" was referred to simply not outputting as intended by the designer. I had output issues when going directly to PDF and had to also continue the old way of doing thinkgs by outputting to .ps then distill to PDF. The "mistakes" that occured for me were nearly unnoticed. The publication was a 128+4 product catalog that had a header at the top of each page. I never had any problems outputting in the past. At the time, I just had updated to CS3 (XP Pro SP3 Dual Core 4 gigs ram). I was advised that outputting directly to PDF had been durastically improved. I output my files without "mistakes" or errors, or so I thought. After proofing, I didn't realize that all of the drop shadows for the header headline were not applied. The problem though, wasn't that they were applied to all headers, just beginning at page 60 or so, halfway through. After getting the finished publication back, I didn't notice it for a few months. After noticing it, I investigated. Several troubleshooting hours later (after forum posts and other expert help), I/we concluded that it was simply a program deficiency. During my trouble shooting, I looked at several areas mainly focusing on the transparency settings. I output the document several times. I finally exported each page separately and found that that was the only way that I could output every page to include the dropshadow in each header page (past page 60 or so).
I have been past that issue for a while now. Now I am on Win 7, Quad core, 6 gigs of ram, and don't have the outputting problem that I used to. Now I occasionally get this "Error due to out of memory condition" which is BS because my hardware specs are beyond reasonable for what I typically create in my workflow. Most of the time, my memory is only at about half of its capacity when I get this error. Not when I have a PS open with a large multipage file that I am working on. My out of memory error happens during file output or just when performing ordinary layout functions in InDesign.
When on my personal computer (Aluminum iMac 2.4 Core2 duo, 4 gigs of ram, 512 video, CS4 & CS5) I have neither of the above issues.

"LabVIEW FPGA: The compilation failed due to timing violations, but there is no path information because the timing violations are not of type PERIOD

The compilation of my labview fpga vi fails with the error message "LabVIEW FPGA: The compilation failed due to timing violations, but there is no path information because the timing violations are not of type PERIOD".
In the 'final timing (place and route)' report, the requested frequencies are all below the maximum frequencies and the compilation error message is only displayed at the very end on the 'summary' page.
I tried to optimize my labview fpga vi with pipelining, but had no success.
Can anybody offer some advice on how to debug fpga code with this error? Is this really a timing error or something else?
Software:
Labview 2011, fpga 2011, xilinx tools 12.4 sp1
Hardware:
NI PXIe-1071 Chassis
NI PXIe-8108 Embedded controller
NI PXIe-7965R FPGA FlexRIO FPGA module
NI 5761 250 MS/s 14 bit Analog input digitizer
The Xilinx log of the compilation run is attached.
Also, this issue was already discussed in this thread ~6 months ago, but no satisfying answer was offered so far...
Thanks,
Fabrizio
Attachments:
xilinxlogc.txt ‏2313 KB

Hi Kyle,
the problem is: I have one computer which compiles the VI successfully and a second one which shows that error. Both use the same software setup (LV2011SP1+RT+FPGA from DS2012-01). Both use the same project file - atleast SVN shows no difference.
- You can have one FPGA VI where one computer is compiling successful and a second one complains. (Btw. I have a SRQ running in Germany on this topic.)
- More problems: After successful compiling on first computer and transferring all to second computer (using SVN, including the full project folder with all files like bitfiles, lvproj, and everything) the second computer is unable to start the RT executable due to error "FPGA VI needs to recompile". Solution so far: Call the FPGA-OpenReference with the bitfile instead of the VI (as I used to do until now)...
- More problems: After modifying the FPGA-OpenReference to use the bitfile (on the 2nd computer) and transferring all the files back to the 1st computer (using SVN as before, including the whole project) the 1st computer complains: FPGA-OpenReference is creating a different reference than is used in the VI. So what happens here? On one computer my VI is ok, the reference is typed correctly. Transferring all the files to a different computer the VI isn't ok anymore due to changes of the reference??? You know: all files are the same: lvproj, FPGA bitfile didn't change, cRIO reference didn't change...
All those problems didn't occur on my RT-FPGA projects in LV2010SP1. I'm not pleased...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

The Job Failed Due to MAX-Time at ODS Activation Step

Hi
I'm getting these errors "The Job Failed Due to MAX-Time at ODS Activation Step" and
"Max-time Failure"
How to resolve this failure?

Hi ,
You can check the ODs activation logs in ODs batch montior >> click on taht job >>> job log
for this first you check in sm37 how many jobs are running if there are many otehr long running jobs then . the ODs activation will happen very slowly as the system is overloaded .. due to the long running jobs ..this causes the poor performance of system ..
for checking the performance of system .. you first check the lock waits in ST04..and check wether they are progressing or nt ..
check sm66 .. for the no of process running on system ..
check st22 >> for short dumps ..
check Os07> to check the cpu idle tiem if its less tehn 20% . then it means the cpu is overlaoded .
check sm21 ...
check the table space avilable in st04..
see if the system is overlaoded then the ODS wont get enough work process to create the backgorund jobs for that like(Bi_BCTL*)..jobs .the updation will happen but very slowly ..
in this case you can kill few long running jobs which are not important .. and kill few ODs activations also ..
Dont run 23 ODs activation all at a time .. run some of them at a time ..
And as for checking the key points for data loading is check st22,cehck job in R/3 , check sm58 for trfc,check sm59 for Rfc connections
Regards,
Shikha

Creating Protection Group Fails with Error:360 The operation failed due to a virtual disk service error

Hello
I'm setting up a DPM server (2012 R2) at a remote site; everything goes well with no issues until a protection group is created, at which point I get the following error;
Create protection group: Protection Group 1 failed:
Error 360: The operation failed due to a virtual disk service error
Error details: The system cannot find the file specified
Recommended action: Retry the operation.
The environment is as follows;
- Virtual Machine Running Server 2008 R2 Fully updated
- Storage Pool is an iSCSI connection Thick Provisioned 1TB GPT and shows in Disk Management with no issues.
- Have connected to Session 0 (console)
- Error log shows The provider did not receive a Plug and Play service notification for the volume. volume=10 for the VDS Dynamic Provider
Can Anyone Help?
Thanks
.Adam Langdon

Hi,
Disk defrag is initiated when a volume shrink is attempted. See if there is any problem defragging a volume and correct any problems doing that.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Why do I have to File Save twice before the Save menu is grayed out?

Open a file into Photoshop CC
Add a Levels layer
Click File>Save
The Save menu is still available when you click File. Doing another File>Save make the Save menu become grayed out (like it should the first time).
System info:
Adobe Photoshop Version: 2014.2.1 20141014.r.257 2014/10/14:23:59:59 CL 987299 x64
Operating System: Mac OS 10.10.1 (the problem has occurred since Mac OS 10.8.x)
Thanks for any help.
Daniel

I have OSX 10.10.1 and CC 2014.
So I will open a PSD with an adjustment layer.
I turn off and on the "eyeball" in the layers panel. It counts as a change.
If you look at your document tab, you see a star at the end of the filename. It shows you made changes to the file.
File > Save would remove that star and File > Save does dim on my Macbook.
If you are seeing it twice, the Preferences file may be corrupt. I suggest a reset.
Macintosh - CMD-SHIFT-OPTION immediately after you double-click the PS icon.
If that doesn't work uninstall/reinstall CC 2014 and updates'
Let me know how it went and mark the answer correct only if this solved your problem.
Gene

HT1766 i try to restore and it says the backup failed - am I out of luck?

I try to restore on my ihone 4 running the latest os and ist says the backup failed - am I out of luck?

What is the exact wording of the error message? Usually an error number is also specified.

Database msdb cannot be opened due to inaccessible files or insufficient memory or disk space - in recovery pending status

came in this fine monday morning and it looks like developers were running some kind of trace that filled the primary DATA folder with about 80,000 5mb trace files. now that process has stopped and the logfiles have been cleaned up, but when attempting to connect to the server using the management console i get the error:
Database 'msdb' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. (.Net SqlClient Data Provider)
when i check the status it is in recovery pending mode. i have a backup from yesterday but im not sure if this database became corrupt before that backup or not because this process was ongoing over the weekend. the last timestamp on the msdb and log files is 7am this morning..
I am not sure how to proceed recovering the msdb database with limiting interruption to the users. any advice is extremely appreciated. this is sql server 2008. i can login via sqlcmd and see it is in recovery pending status:
1> select state_desc databasestatus_sysdtabase from
2> sys.databases where name ='msdb'
3> go
select state_desc databasestatus_sysdtabase from
sys.databases where name ='msdb'
databasestatus_sysdtabase
RECOVERY_PENDING
(1 rows affected)
1>

For someone experiencing a similar problem this answer is unacceptable. You're basically telling me to reboot the server to fix this. You vaguely mention using process explorer to find out who is using the file. Can you please provide
some more information on that? I have a similar problem and rebooting the server to fix it is not an option. This problem keeps reoccurring.
OS Error 32 means file has an open handle by someone else. If that is a user process then you can catch it via Process Explorer. If it's a kernel mode object then it's difficult to catch that and restart is the only choice.
http://sqlserver-help.com/2014/08/07/tips-and-tricks-os-error-32the-process-cannot-access-the-file-because-it-is-being-used-by-another-process/
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

Out of memory: Java heap space

Hello,
I am working on a project, that simulates large populations, with each individual being a separate Objecta(a couple of kilobytes in size each).
Once i reach a bug enough number of those Objects (stored in a Vector), i get Out of memory: Java heap space exception.
Am i having a memory leak in Java? Or am i really reaching the maximal JVM limit and i need to reconfigure it, to support larger heap size?
:)

Am i having a memory leak in Java?Because of garbage collection there, by far and large, aren't memory leaks in java. However, there certainly is memory waste.
If each of these objects you make room for are unnecessarily laden with references to other large objects creating huge networks of objects that never free their memory, and then you allocate 1 million of them, then, while not a leak, you are wasting your memory space.
Look through your class and inspect each field to see if any of them could be holding more data than you intend. If so, multiply the amount of that data by 1,000,000 or however many objects you are going to instantiate to determine if this produces and absurd amount of memory. You should be able to predict ~how much storage your data will need...each char is 2bytes, each int is 4 bytes, doubles are 8 etc

2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space

Hi Experts,
I am getting below error when Exporting data from my one web application to the Excel 2010 on Windows Server 2008 R2 ,
02/29/2012 18:54:50
Type : System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b11a5c481859e569
Message : -2146827284Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space.
• To make more memory available, close workbooks or programs you no longer need.
• To free disk space, delete files you no longer need from the disk you are saving to.
The disk space is 30 GB free, I have cleared all the temp files, increased the virtual memory & internet temp files size to max but no luck

You want to use this one here - MMC
comexp.msc /32
THAT will launch the MMC process
as 32 bit then you'll the Microsoft Excel Application.
Right Click -> Properties.
What I did at this point was to select the Identity tab and then select "The Interactive User" (the default was "The launching user"). My app pool was already running as "LocalSystem". I believe by running it as the Interactive User now that it
has the right permissions to save workbooks.
Everything worked after this.
This was a tough one!
R. Matt Sampson

My brand new MBP 13"got the error "there is not enough memory or disk space to convert this document". What gives? Help please!

I am trying to use mail merge in Word for Mac on My brand new MBP 13". And I get the error "there is not enough memory or disk space to convert this document". What gives? Help please!

Why do I get there is not enough memory...: Apple Support Communities
Error message in MS Word opening a .docx file "There is not enough - Microsoft Community

MSword2003: error-"there is not enough memory or disk space to complete the operation"

One of my files can't be opened because of the error"there is not enough memory or disk space to complete the operation"
i have tried every thing....
renaming the template from normal.dot to old.dot...
disk cleanup
deleting all the temp,%temp,internet files, cookies.
but nothing working .....
please help

This forum is for questions and discussions about the TechNet Wiki. I will try to move your question to a more appropriate forum, dealing with Office technical issues.
Richard Mueller - MVP Directory Services

The save failed due to out of memory or disk space?

Similar Messages

Maybe you are looking for