The scheduled time "Do Not Disturb" suddenly stays on all the time

I set up my Do Not Disturb for specific time frame. It worked fine for months, coming on at 10pm going off at 8am. Suddenly last week I noticed it stayed on all day!
No matter what I do it does not automatically go on and off now. I've tried turning my phone on and off, but that is no help.

See here:
http://support.apple.com/kb/TS4510

Similar Messages

  • The videos I purchased on iTunes are taking up all the storage on my IPad. Is there a way to remove them from my iPad to free up some storage, but store them in the cloud to access in the future?

    The videos I purchased on iTunes are taking up all the storage on my IPad. Is there a way to remove them from my iPad to free up some storage, but store them in the cloud to access in the future?

    Thx - the videos are on my Ipad - that is the problem - they are taking up all the storage and there is no room for anything else. Is there any place I can store them so that I can access them from time to time, but not have they use up all the space on the IPad? Sounds like the cloud is out...

  • Does Apple TV stay on all the time? If not, how do I turn it off?

    Does Apple TV stay on all the time? If not, how do I turn it off?

    You can put it in standby via the settings.

  • HT4381 apple tv, does the light stay on all the time, or is there a way to turn off the apple tv when not in use?

    the light on the apple tv stay on all the time? is there a way to turn it off or put it on stand by?

    No, it doesn't need to stay on all the time. You can leave it on if you want, since it uses little power, or you can go into settings and select sleep. You can also use the remote to achieve this (hold the select button for 5 secs)

  • N95 8GB camera light stay on all the time

    I have had the N95 for 5 months and have been very pleased with it. I have now developed a problem with the camera light. not sure how or when it happened. Other than the fact the camera light stays on all the time, the only way to get the light off is to remove the battery...!!!
    Is there a simple solution or does this need to be returned for repair

    Hi I've been having this same problem this week! I'm going to wipe my phone and re-install the software update and see if that works, otherwise it's off to Vodaphone to be repaired
    It's strange it's just suddenly started doing it, and it's been a while since I first installed the latest update, when it came out.
    D.

  • Blue/White light staying on all the time - Houston, is there a problem?

    I use a 1tb Free Agent drive for Time Machine, and it has a blue-ish white light that comes on when it's working. For instance, it always comes on when I wake up the machine.
    This morning, it's on - and it's staying on. The drive is not full. It appears to be backing up properly. But the darn light is on. So I ask, Houston - do we have a problem here?
    Thanks.

    Digital Gee wrote:
    This morning, {the light is} on - and it's staying on. The drive is not full. It appears to be backing up properly. But the darn light is on.
    Open the Time Machine panel of System Preferences to see what Time Machine is doing. I'd also look at the Spotlight icon at the right end of the menu bar. If there's a dot in the middle of it, Spotlight may be trying to index the external drive. If you don't want it to do that, you can add the drive the the Privacy tab of the Spotlight panel of System Preferences.

  • Quick Launch buttons stay on all the time...6910p

    Hello all...first time here...I have a HP 6910p that the lights on the quick launch bar, stay ON all the time...even on battery, or ac....with the laptop OFF...I am really confused about this one..and I HOPE someone on here can help
    I have replaced the motherboard, and the way I look  at it, it cannot be the OS because it is not powered up when this happens...
    On battery alone, does the same thing, lights on all the time.
    I have remove the ribbon cable that comes from the  power on button circuit board,,, still does it.
    I removed the processor, still does it.
    I have updated the bios, to version F.17 and there is a newer one I think to version F.19
    I am a complete lose about this one..
    What could make these buttons light up while it is completly down?
    Scratching my head on this one...
    Thanks for any help
    Kenny

    @Kennynva 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • GPRS or Wifi stay connected all the time

    I am in a big dilemma. A few days back the GPRS or Wi-Fi connection always connects on its own and stays connected for hours! It used to connect only when required (exchange or Push mail set to synchronize every 30 minutes). It used to connect, check mails and disconnects automatically. But now, it stays on all the time. I checked all my mail connections and they are all set to check mails every 30 minutes. I made sure there are no apps running in the background also.
    I called Nokia care and their suggestion is to format the phone and try. But I have so many pics, videos and data that I do not want to format.
    A better solution (than hard reset/format) is always welcome.
    Thanks.

    Hi Pravin. Although it does not transfer any data, my concern was the connection always being active and battery life getting shortened. Anyways, the connection always being on according to me is a bug.
    After I did the factory reset, I came to a conclusion that it was one of the emails that I had configured (5 email accounts + 1 exchange account) and one of the email accounts was hanging this.
    It is much better now after a factory reset.

  • Can not see my Airport in the list of Wifi networks and is blinking organge all the time

    Can not see my airport on the list of WiFi networks and is blinking orange all the time. Tried to reset several times.

    Do you have a Mac or idevice for setting up the Express? It does require a later utility than is available for windows.
    You might be able to setup with the v5 utility in windows but there is no guarantee.
    You should use a simple name both for the base and the wireless. eg AEXgen2 base name and AEXwifi for wireless name.. that is if you get access.

  • Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened.  Verify that the package exists and that you can access it???????????

    Each time I try to install itunes I get a windows installer message telling me that the installation package could not be opened.  Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package.....

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

  • Just uploaded iso7 , . . .hate it!  Can you change background colours?  How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it?  Thanks

    Just uploaded iso7 , . . .hate it!  Can you change background colours?  How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it?  Yellow on white is harder to read. Thanks

    Another question. How do you bookmark something.  It was so easy before, why did they change it?  Can I uninstall it?

  • A connection attempt failed because the connected party did not properly respond after a period of time

    Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
    Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
    South Central and East regions:
    "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
    It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
    On Azure, the same web service call can result in this error or will return a response successfully.
    There doesn't appear to be any pattern as to why the same call would work one time but not another.
    How can this be resolved again? Any feedback is appreciated. Thanks.

    Hi,
    Please have a look at this article:
    http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
    it gives us several ways to solve this issue, hope this helps.
    Best Regards,
    Jambor 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Screen stays on all the time power savings set up

    My imac's screen stays on all the time now once I upgraded snow leopard to 10.6.3 it has been doing this since I got the settings so that the screen turns off 3 minutes after inactivity but the screen never turns off now.
    the only time the screen turns off is when front row is running.
    Any ideas?

    That is a bit quick to turn off the display from inactivity but that would be a personal choice. I let mine run for at least 10 minutes before the Screen Saver activates and then another ten minutes before turning off the display.
    Try resetting the PRAM and the Systems Management Controller.
    Reset the PRAM
    • (Re)start the computer
    • Immediately press & hold the CommandOption+PR keys
    • Wait for two startup chimes
    • Release the keys and allow the computer to boot.
    Reset the SMC
    • Shut down the computer.
    • Detach the computer's power cord.
    • Press and hold the power button for 5 seconds.
    • Release the power button.
    • Reattach the computers power cable.
    • Turn on the computer.
    Dah•veed

  • Why does my home screen light stay on all the time.

    My homescreen stays on all the time.  The only way to turn it off os to puch the top button. It even stays on while its charging.  Its draining my battery! HELP

    Check Settings>General>Auto-Lock and see what the time setting is.

Maybe you are looking for