The screen always changes to blue

I bought a new iphone 5s around November last year, and took it back to China. After power ran out first time, the phone did not work. Screen always changes to blue, and I recovery it several times. Sometimes it works a couple days, and just does not work again.
Could you tell me what I should do now? The phone is now in China.

Hi there hussamfromaden,
You may find the troubleshooting steps in the article below helpful.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

Similar Messages

My Macbook display changes color when I open applications. It looks like there is a light blue layer over the screen, thus changing the color of my display. This layer goes away when i quit the applications.

I am facing a problem and I am not sure if its a graphic card malfunction. When I open applications like Chrome, VLC player, and most apps, my display suddenly changes color. It is as though the Theme was changed. The normal grey panel on opened windows turns to light blue and everything else seem as though there is a light blue layer on top of it. When I close these applications (quit) the display returns to its normal self.
My MacBook Pro is 2 years old, and I have an extended warranty. Will Apple replace my graphic card if it is actuall the graphic card's problem?

I had that problem, too, and it's been documented both here and on the Adobe forums. What happens is that when you have dynamic switching on, when an application that uses your discrete GPU kicks in, the screen will change color. My problem lasted for a couple of weeks then just vanished.
What you need to do is download Cody Krieger's gfxCardStatus and turn off dynamic switching and leave your GPU set to discrete only. That's the only fix that I know of at this time. I don't know why it happens or why mine stopped.
Good luck,
Clinton

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

When i scan in PDF and view it on the screen it has a blue effect

When i scan into PDF and view it on the screen it has a blue effect

What scan software do you use? Adobe Reader can't create PDF files.

Reset all settings and contants ipad.Now ipad is not open?why?on the screen always apple icon.

reset all settings and contants ipad.Now ipad is not open?why/ on the screen always apple icon.

Why would you do that? That's not how you deal with issues on your iPad, that's how you deal with problems on poorly designed Windows machines.
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430

SECATT not saving the screen for change of address in CAA2

Dear Secatt Experts
When recording the transaction CAA2 using TCD(Record) in SECATT, the
screen for change of address in the main screen of CAA2 is not getting
saved. Therefore I am unable to run the script for change of address
The address can be changed (Fix any address other than standard address)
by using F4 function in the address field in the main screen.
Please help
Best Regards
Venkat

Hi Venkat,
It should work fine with SAPGUI recording. So please try this.
Hope it helps.
Regards,
Ananth.

After the upgrade of SAP the screen got changed

the available tab in the screen got changed after the upgradation.
the changes of the upgrade has been transported to testinf server . But in production system the tabs are different in Project System CJ20N. Here earlier it was artist but aftre upgrade in testing environement its Cust. Enhancement also one new tab introduced LONG TEXT.
PLEASE PROVIDE THE SOLUTION.

Please respect Forum Rules..!!
(do not use full capital letters for message / heading)
It seems your Lay-out of flexible detail screen got changed, which needs to be corrected from the below path.
SPRO >> PS >> Structures >> Operative Structures >> Work Breakdown Structure (WBS) >> User Interface Settings >> Layout of WBS Element Detail Screens >> Define Layout of WBS Element Detail Screens
Please also refer SAP Notes : 304386 and 383310

HT1459 4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?

Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Is there a way to make the icon/words larger on the screen without changing the screen resolution?

Is there a way to make the icons/words larger on the screen without changing the screen resolution?

If you right-click in the top of title bar of any Finder window there is an option to un-check 'use small icon size', though toggling between the two makes little difference on my screen.
Another trick is you can zoom the whole screen by holding down the 'control' key and using a two-finger swipe up on the trackpad to enlarge, down to go back to normal.

I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable

I was upgrading my iOS last night but when I checked to see the progress ,the home page refused to show. After d apple icon comes on the screen immediately changes to show the iTunes icon with a charging port cable. What should I do?

That means that you have to connect your iPad to your computer and you need to use iTunes to restore the iOS. Software. Read this for the instructions.
iTunes: Restoring iOS software - Support - Apple

I have to press the button at the bottom up to 5 times to get the screen to change. How can I fix this?

I have had my i phone 4 for a few months now. Lately I have to press the button at the bottom multiple times (up to 5) to get the screen to change. Any way to fix this? Thanks

You can try basic from the manual:
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Otherwise, make an appointment at the Genius Bar. If it is defective, then they will replace.

My screens keep jumping all over the screen and changing size while I am trying to work why?

My opened pages keep jumping all over the screen and changing sizes while I am trying to work - what is causing this?

Madafk wrote:
.... - I really love this Mac but it is taking a bit of getting use to
Cheers
You may find these Links helpful in enjoying your Mac...
http://www.apple.com/support/mac101/
http://www.apple.com/support/switch101/ Switching from PC
Find Out How (Video)
http://www.apple.com/findouthow/mac/

Since my printer only prints in black, how do I get all the print on the screen to change to black?

My color printer prints ONLY in BLACK. The screen I want to print is printed on the monitor in blue and red. How can I make all the print black on the monitor so it will print black on my printer?

Explore the settings for you printer to see if there is a setting for "gray-scale" to un-check so that you do not get the gray when printing the blue or red text that shows on your monitor. You can click Print, then click Properties on the Print screen to see if you can change it; while there, look to see if there is an option to use the black cartridge only if that is what you want to do. On my printer, making the change there was only temporary and I had to do it through the software that came with my HP printer to make it permanent. Your printer manual would be a place to look also.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

How to reload the screen when changing languages in JavaFX 2?

I'm beginner with javaFX and i need to change language of the screen. but i have no idea how to reload the screen when the language was changed. The application have a button where have the language available. I want just refresh screen when the user change language.
Here is the start method to show the stage.
    @Override
    public void start(Stage stage) throws Exception
        this.stage = stage;
        Locale locale = Locale.getDefault();
        ResourceBundle rb = ResourceBundle.getBundle("resources/Label",locale);
        loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
        root = (Parent)loader.load();
        FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
        controller.setMain(this);
        scene = new Scene(root);
        stage.setScene(scene);
        stage.show();
here is the function to change the language(in the same class with start function),the rb is the new ResourceBundle:
    public void refresh(ResourceBundle rb)
          //change the language here
1. I don't want to use the resourceBundle to get value in resource file and set label in scene one by one.like following:
this.btnLabel.setText(rb.getString(key.test));
2. I don't want to reload the scene,like following:
    public void refresh(ResourceBundle rb)
         try
            loader = new FXMLLoader(getClass().getResource("FXMLDocument.fxml"),rb);
            root = (Parent)loader.load();
            scene.setRoot(root);
            FXMLDocumentController controller = (FXMLDocumentController) loader.getController();
            controller.setMain(this);
        catch(Exception err)
            err.printStackTrace();
So do we have a solution to just set the resourceBundle and reload the scene easier?
Thanks and best regards!

Your option 2 (reload the FXML for the scene using the new resource bundle as a parameter), is the way this would normally be done and what I would recommend.
Failing that, you could use option 1 of individually resetting the label text of labeled items (I don't really recommend this).
Why don't you want to use option 2?
Perhaps it is because there is some internal state of the UI which differs from the initial state when the the UI is first loaded (e.g. user has typed text in a text field and you want to preserve that). If that's the case you will need to either go with your option 1 of individually resetting the label text of labeled items, or implement something which preserves the UI state and user data by saving it in memory or to disk, reloading the UI via the FXMLLoader (essentially your option 2), then restoring the UI state and user data to what it was before the language change. Preserving and restoring the modified state seems complicated to me if you have a lot of state, so I wouldn't really advise this approach unless you really needed it.

After upgrading my iPhone 3GS to Version 4.3.5 the screen cannot change when I move it horizontally. Why? Can anybody help me?

I got my first software update few days ago to a newer version 4.3.5. And i find a change that the screen doesn't change while i move my phone horizontally. It is now act like fixed. When I used to see my album I feel bad and Im searching a way to fix this problem. Please help me by knowing me what is wrong to me? I need help immediately.

This might also help http://manuals.info.apple.com/enUS/iPhone_iOS4_UserGuide.pdf - Page 32

The screen always changes to blue

Similar Messages

Maybe you are looking for