The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work, The screen doesn't work except on the bottom and i cant reboot it because my power button doesn't work
I was in the middle of texting my mom and the screen stopped working! It only stopped working in the middle but i can't even turn it back on because my password numbers won't work when i touch them! I also cannot reboot my ipod because the power button doesn't work! I need help on fixing this problem please!!
Try as best you can with broken button.:
- iOS: Not responding or does not turn on
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
For MAC or PC
The Firmware Umbrella - TinyUmbrella
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
My iphone 5 power button doesn't always work. I have heard this is an issue and Apple will replace it if under warranty, but I have a broken screen. Will they still replace it?
It is unlikely but you can atleast try they might set it up for free but expect an email about paying 269 for physical damage
-
I have an older Power Mac G5 Quad, and my video card just went out. I am trying to find a video card that will work for my Power Mac. I have duel screens but I can't seem to find the appropriate video card. The serial number on my computer is: RM620603R6W. Apple won't help me because the computer is older than suggested. Please give me the exact video card that will work best for my computer.
Hi Mike, make sure the card has Mac ROM, or is a PC card with Mac ROMs flashed to it...
G5 PCIe options are listed here:
http://www.jcsenterprises.com/Japamacs_Page/Blog/71BBF3EF-9713-4C53-8B80-26771F8 A4087.html -
I just tried to install the new IOS version and now my screen is all black.. since an hour. My power button is broken so i cant reset my phone. When i plugg it in my computer, it makes a sound, but the screen stays black.
WHAT TO DOcarter87 wrote:
so i bought this Iphone 4 thats jail broken,
Return it.
Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issues
Security vulnerabilities: Jailbreaking your device eliminates security layers designed to protect your personal information and your iOS device. With this security removed from your iOS device, hackers may steal your personal information, damage your device, attack your network, or introduce malware, spyware or viruses.
Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
... It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software. -
iPhone 4 Power button no longer works. 2 Months out of warranty, I haven't got $179 to replace it, any ideas? I have attempted self repairs, made the situation worse.
was attempying to put a piece of paper underneath my button, as I had seen on an online tutorial.
Did that "solve" or cause the problem??? -
My MacBook pro retina display 15 inch (2013) doesn't start. After I press the start button there is only a beep sound at regular interval. The screen remains blank and the keys don,t light up. Can anyone help please?
If your MBP is under warranty, bring it to an Apple store and have the technicians fix it. If not, try the steps in this support article:
http://support.apple.com/kb/ts2570
Ciao. -
I have an ipad mini that won't power on. It was turned off to charge overnight. In the morning it was warm and now won't turn on no matter what I do. I've tried resetting using the power / home button combination and nothing works.
If you have owned the device, as in purchased from Apple, less than a year then there will be no charge to repair, or most likely, replace the device. If you have had the device more than a year you will be charged an out of warranty cost for replacement ($219 I think) and that is much cheaper than a new device. If you have Applecare+ then you have an additional year of coverage and the replacement will be $49 or $79 depending on when you got the Applecare.
-
I am new at Captivate 8 and I have created a learning project using an existing power point presentation. I have added a button that will allow my students to view a video on the subject. When I run the project in Preview the button works but when I publish it, it stops working.
I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server. In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4". If I run this from any browser it works. So what do you think I have done wrong?
-
After installing 8.2 on my iPad (2nd gen) all the apps crash during use. It appears that the iPad saves a version of what I was using because after the app crashes I double press the home button an there is a screen of an older version of the page I was using. I swipe it away and start over, only to have the same thing happen again. I have reinstalled all the apps, rebooted, synced and re-synced with iTunes. This is VERY irritating!
That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it... -
I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?
Place the iOS device in recovery mode using this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
Enter DFU mode without home button or Power Button | technoNix
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
hi i very need help my ipod touch 4th was already damages (the glass screen wasnt in the silver part) and yestarday i was cleanin my room while listeng to music and my ipod fell 2 times after about 30 min half of the screen was light white first i thought it was a virus so i fully shut down my ipod and i also restored it but it didnt work so looked closly and saw that the left corner on my ipod was badly dented inward after i thought for a bit i thought that the spary i was using to clean my room could have gone in my ipod because the glass screen wasnt in the silver prt but i dunno if this prob cant be fixed at home by me does someone know how much it will charge 2 get it fixed and where i can get it fixed THANKS it wuld be a great help plz reply as soon as possible xoxoxox
This has happened to me but i don't know what to do because my Itunes kept closing down and it shut down half way through updating and it just comes up with a silver apple and it won't turn off and now it's just frozen and it also doesn't recognise it when i opened up itunes again after i reset it to the factory settings
-
After installing the new software to my iPhone 4S , my dream zoo either will not start or when it does it has a blank screen that has a few icons on it that wont work. How can I fix this is it possible to go back and reinstall the older software ?
Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?
-
my on/off button does not appear to be working on my iphone 3.....is there any way around this....anyway around this?...the phone also periodically just switches off.
Likely a hardware issue... no way around that except to get it repaired or don't use it (the button).
Try restoring to solve the switching off problem. -
It rained in my window last night, on my power strip. My macbook adaptor (charger) and iphone adaptor were both plugged into the strip. The power strip is dead. Iphone is fine. Macbook will not boot up and charger light doesn't go on. I borrowed another charger and still no luck. What should I do? (Charger wasn't plugged into Macbook until I dried it off.)
Spill Cleaning
And, don't think that just because it was two teaspoons and not a glassful that there is a difference.
Some liquid has just spilled into your Mac. What should you do?
Do
Immediately shut down the computer and unplug the power cord.
Remove the computer's battery (if you can)
Disconnect any peripherals (printers, iPods, scanners, cameras, etc.)
Lay the computer upside down on paper towels to get as much liquid as possible to drip out.
Note what was spilled on your Mac.
Bring the computer into an Apple store or AASP as soon as possible.
Don't
Don't try to turn it back on. Liquids can help electrical current move about the components of your Mac in destructive ways.
Don't shake the computer (this will only spread the liquid around).
Don't use a hair dryer on it (even at a low setting a hair dryer will damage sensitive components).
Do not put in a bag of rice in as much as rice will get into the ports and optical drive and do further damage. -
my imac (intel core i5, OS 10.10.1) shuts down every night and will not "wake up" next morning -- it never used to do that -- if I hold down the start button more than twice for many seconds, then it will finally boot up and works fine all day – I’ve tried shutting it down and unplugging it, and that does not work -- I’ve run disk utilities checked permissions, and run anti-virus and get no adverse results – I cannot figure out what is different that causes this problem
From previous experience 3 indicates a shutdown initiated by the SMC (System Management Controller) — hardware responsible for many low-level functions including power, sleep, lights, and fan activity.
Try resetting it:
Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer. -
Calendar "today" doesn't show current date, it's now 23rd of Nov 01:03 in Beijing, but Today button of Calendar itself shows "today" as 22nd. So does the Calendar of Yosemite.
Is it a bug?Sorry for the huge chunk of code.
Mm, yes, I'm far too lazy to read all that.
But you should be overriding paintComponent(), not paint().
http://www.google.co.uk/search?hl=en&q=java+swing+painting&btnG=Google+Search&meta=
I've not bothered to work out from that pile of magic numbers exactly what you're tring to draw but is it not something that JTable would happily do?
Maybe you are looking for
-
Office 365 : SharePoint designer workflow platform not available
Hi, We have Office 365 E3 subscription and I am facing issue creating any SP2013 designer workflow for the sites created via Custom Web Templates ? The option to create designer workflow with "SharePoint 2013 Workflow platform" is unavailable with me
-
Adobe Camera Raw window-Only full screen?
I use Elements 7.0. In an attempt to improve my photography, I've been concentrating on getting as close to a proper exposure in camera using zone system etc. To further get close to the appropriate exposure after the shot is taken, I've begun to s
-
Hi specialist I have an issue that is not resolve yet. User create one Gl account using the transaction FS00. THey included in the currency EUR. After that they generate some postings with the currency CHF. IT was in January 2012. After that they cha
-
CRM - SAP ECC 6.0- How to keep creation user data
Hello gurus, I'm working on a SAP project which scope is CRM - ECC6.0 (IS-U +SD) - BI 7.0 and we are facing an issue trying to extract from IS-U the user who created a business operation. You have to know that process designed is : - business operati
-
Maverick updated and now i cannot open microsoft office for mac
Has anyone come across this too? It says "Excel cannot open this work book" and "the file name or file path contains an invalid character, for example " / " Same thing for word and although not tried it, powerpoint too Any ideas?