The screen get stucked.

The screen of my Ipod nano get stucked by a song.
And now you only see that song
And when i connect the i-pod to the computer, you dont see the ipod at iTunes.
If you push a button it wont help.

Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

Similar Messages

  • I restored my iPod in the middle of a download, now it can't do anything but restore, and when i restore it, the screen gets stuck on weird things, like the apple screen or purple or yellow. how do i get it un-stuck?

    i restored my iPod in the middle of a download, now it can't do anything but restore, and when i restore it, the screen gets stuck on weird things, like the apple screen or purple or yellow. how do i get it un-stuck?

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?

    Just turned on my MBP 2007 and the screen gets stuck on the light blue before the normal log in page comes. Any Clues?
    Worked fine last night. It's running Snow Leopard.

    Does your iMac fail to boot every time or only some of the time?  Here are some things to try:
    - Boot into "safe mode", which will run the equivalent of Disk Utility's "repair disk" operation.
    - Boot from the system install disc that came with that Mac with the "D" key held down to run the diagnostics.  Run them several times to see if any hardware problems are reported.
    - If you can't identify the problem or fix it any other way, download and install the OS X 10.6.7 "combo" updater.
    - If that still doesn't help, try reinstalling OS X 10.6 over the top of what's on the disk.

  • HT1338 i cant get in to os system. the screen just stuck in white screen and apple logo

    i can not get in to my os system. the screen just stuck in white screen and apple logo

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
         a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
    Step 6
    Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
    Step 9
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    I purchased a movie through iTunes and the movie gets stuck on the opening screen and will not play.  Has anybody had this happen?  And if so is there any solution?

    Hey Christian,
    I'd follow the troubleshooting steps below, from this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    See if that resolves the issue and gets your video playing again.
    All the best,
    David

  • In mail, after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.

    In 'mail', after importing mailboxes the process gets stuck on '1619 of 72826' and 'time remaining' climbs infinitely. Please suggest a solution.
    I converted my mail boxes from POP to imap for the purpose of syncing all my devices. I backed up my mail boxes and further more perfomed a timemachine backup.
    Upon restoring ther mailboxes, either by manually copying them to the mailboxes folder, and restoring a timemachine backup, both pocesses result in the above problem.
    Please recomend a solution.
    file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.48.10 %20PM.png
    file://localhost/Users/redwood/Desktop/Screen%20Shot%202013-10-15%20at%201.38.30 %20PM.png

    Can anyone out there please help!

  • I am unable to email an image from camera roll. the image gets "stuck". cannot input email address or subject line. am unable to cancel and go back to camera roll

    i am unable to email images from my camera roll. the image gets "stuck". cannot insert email address or subject line. cannot cancel... return to camera roll.
    what to do. i tries taking new picture and sending it in an email... same thing... gets "stuck "
    Waht to do ?

    Hello lohmann8,
    Thank you for providing so much detail about the issue you are experiencing with emailing photos from the Camera Roll.
    The first thing I recommend is quitting and relaunching the applications on your iPhone:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    You can find the full article here:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you are still seeing the same issue after quitting and relaunching the Photos and Camera app, I recommend restarting your phone and then resetting if it's still not working:
    Restarting your device
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
    Press and hold the Sleep/Wake button until the Apple logo appears.
    Note: Reset your device only if you are unable to restart it.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    You can find the full article here:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    If the issue persists, the last thing I recommend is backing up and restoring your iPhone:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    iTunes: Restoring iOS software
    http://support.apple.com/kb/HT1414
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • HT203177 I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo

    I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.

    I have a MacBook OSX 10.5.8 and a Time Capsule 500GB since July 2008. My problem is (for the 4th time in 4 yrs) the backup gets stuck in "preparing" indefinitely (hours). In the past, wile still under apple care warranty, tech support had me redo backup (loosing previous backups). Now I'm out of warranty and still having this problem. Any help is greatly appreciated.

  • How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar              
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following maybe less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the screen yourself if you are up to it
    iPod Touch Repair – iFixit

  • When i open my computer I get the white screen with apple symbol and there are vertical lines all over the screen with green pixels and after a few minutes the screen gets grey and I get message to restart my computer what happens

    3 years ago I bought an IMac Desktop that I am using for a lot of things but the most important for dvd montage in Imovies and Idvd.
    Now today when I opened my computer I get as usual the white screen with the Apple symbol but there were all over the screen vertical lines with green pixels and after a while the screen gets grey and I get message to restart my computer using the power button or the restart button and when I do so each time the same is happening somebody can tell me what is happening and what caused this. This computer is my work and now I have no income anymore.
    On the Apple support site they are asking to enter the serial number and when I do so I get message it is wrong but it is the only one I have and I buy this computer in Cairo Egypt. I am living in Hurghada in Egypt for the moment. When I call the technical support of the shop where I buy it they are telling me that it is the hard disk or ram and that I probably lost everything on it and they are asking a big amount to repair.
    Can somebody advise me on this matter. Thanks in advance

    You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
    If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive. 
    You can also boot into Safe mode
    To start up into Safe Mode (to "Safe Boot"), do this:
       1. Be sure the computer is shut down.
       2. Press the power button.
       3. Immediately after you hear the startup tone, press and hold the Shift key.
          Tip: The Shift key should be held as soon as possible after the startup tone but not before.
       4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
    During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
    During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
    Please post back with results,
    To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

  • I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands

    I used utilities to source my 10.6 snow leopard install disc to my main hardrive, and now when I turn on my computer the apple with the spinning wheel stays on the screen and stuck like that. How do I fix it Help please. I already tried all the commands such as Command R, Holding down the Option key, C and holding down shift at the start up but nothing happens.
    initialy All I was trying to do was downgrade 10.7 to 10.6 .

    You have to consider the possibility the hard drive may be dying.    If your data isn't backed up, try one of the tools below:
    https://discussions.apple.com/docs/DOC-1689
    Once you are sure your data is backed up, we can examine other possibilities.  In the meantime call AppleCare for your original installation DVDs.  You may need them.

  • TS3276 Mail screen is stuck on draft screen the past 4 days. Safari and all others are working. But when I click on mail, it shows the draft screen. This is the last thing I was working on. I was able to send my mail then. Then the screen just stuck on th

    What to do if the screen is stuck on the draft screen? I was writing a mail, saved it as draft, then later, was able to send it. However, the screen did not revert to the inbox page. The draft page seems to be hung or stucked. Safari and all others are working ok though.

    I sent the draft to myself several times. That did not seem to be working, but when I opened Mail this morning, it has been sent all of the times and the Mail screen is no longer frozen.

  • In the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops.

    i have updated my ipod 4g to ios 5.0. everything went great, but something is not right cause sometimes in the midle of a song the screen gets dark, then suddenly appear the home screen of ipod and the song stops. help-me, what should i do?

    It occurs with both ripped songs and ITMS songs, but not always the same songs. Just this morning, I had a song skip ahead, then put down the ipod for a few mintues, came back and that same song did not skip ahead at all. I've been on a stretch now of about 20 songs with no skipping whatsoever. Hmmmmmm....
    I've used all the five "R"'s multiple times to no avail. It just seems so random, it frustrates me.
    Thanks for the help, King

  • My iPad mini touchscreen won't work and the screen is stuck on Choose A Wifi Network....Can Somebody Please Help Me

    MY Ipad Mini Touchscreen Is Not Responding. It Won't Let Me Type In My Password When I Tried It Then Said That It Was Disabled For 1 Minute. Then I Tried It Again It Said Disabled For 5 Minutes. then I Tried To Reset It, I've Tried Recovery Mode NOTHING! Now The Screen Is Stuck On Choose a Wifi Network...Can Someone Help Me Please

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Recently my pc crashed and I had to have a new profile built.  now when syncing my iphone to the computer the sync gets stuck on step 8 and "syncing artwork"  It never finishes syncing...just sits there for hours.  How do I fix this?

    Recently my pc crashed and I had to have a new profile built.  Now when syncing my iphone 4s to the computer the sync gets stuck on step 8 and "syncing artwork"  It never finishes syncing...just sits there for hours.  Subsequently most of my music and apps are missing from my iphone because it never finishes syncing.  How do I fix this?

    1) ensure iTunes is authorized for your iTunes store account(s)
    2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
    3) sync the device
    iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
    above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.

Maybe you are looking for

  • Multiple users on one itunes account

    Hi. I have 3 separate users on my Windows 7 machine with each having a unique library but all sharing the same itunes account. I want to split them up and give 2 of them new itunes accounts but obviously I want them to keep their library and if possi

  • HOW TO ADD A NEW ITEM ON CREDIT MEMO REQUEST DETAILS PAGE?

    Dear friends, Please help me to do this by personalization or extension. This is very important for sustaining in my job. Please post your thoughts as soon as possible. Thanks so much for your help and support. Here is the scenario: In credit memo re

  • Best way to expand/ get more ports

    Love my airport extreme(n) but 4 ports is too tight - What is the best way to get MORE ports ??? Add on a cheap switch and plug it into one of the four on the exteme. ??? Get another extreme? - that seems too expensive for just adding a couple of por

  • Printing to my OfficeJet Pro 8500A Plus has stopped entirely

    Suddenly my printer has stopped working for everyone.  I have it set up to do use wireless connectivity.  It was working fine on Friday, but suddenly stopped working for everyone.  The only way to print anything at all is to submit something to the q

  • Contract (me31k) can convert to PO after validity date.

    Hi all, I'm curious on the below mention scenario: Contract-A is created using tcode me31k. We have set the validity period and end date in the contract. After the validity period (example:30-June-2009), we can still create PO referencing this contra