The screen has suddenly gone bigger than ipad and i cant reduce the size. I cant see whole keypad

how can i reduce page in order to see all pf it on screen? suddenly enlarged-what did I press?

Three finger double tap drag down to unzoom.
Three finger double tap drag up to zoom.
Settings > General > Accessibility.
See this -> http://support.apple.com/kb/HT4064

Similar Messages

  • My I phone5s screen has suddenly gone haywire everything is enlarged I tried switching off the phone  but when I put it on again I could not feed the security nos as they are all enlarged Kindly advise what should Ido

    my I phone5s screen has suddenly gone haywire everything is enlarged I tried switching off the phone  but when I put it on again I could not feed the security nos as they are all enlarged Kindly advise what should Ido

    Hi, vernon.  
    Thank you for visiting Apple Support Communities.  
    This sounds like you may have enabled the Zoom feature.  Here are the steps on how to disable this feature.  
    iOS: Home screen icons are magnified or large
    http://support.apple.com/en-us/HT203332
    Cheers, 
    Jason H

  • My ipod touch gen 4 screen has suddenly gone black

    My ipod touch gen 4 screen has suddenly gone black, i tried resetting it and the white apple symbol suddenly appears then goes black again, restoring it to factory setting and updating it but it hasnt changed any assistance would be greatly appecited

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • TS3274 My Ipad screen has suddenly gone color negative.  What's up, and how do I correct it?

    IPad screen has gone color negative.  How do I reset this?

    Goto... Settings > General > Accessibility > White on Black > Off

  • My screen has suddenly gone black and doesnt respond to anything

    Hi all,
    Last night my screen suddenly went black, however the phone is still on as it vibrates when I ring it.
    Ive tried the master reset but it wont actually turn off. Ive also restored the OS and its still faulty.
    Anyone have any ideas?
    Thanks

    Welcome to the discussions,
    did you restore "as new iphone", without using the backup to restore from afterwards?
    Also try this, mentioned here: http://support.apple.com/kb/TS2802
    Display has no backlight or dark screen
    1 Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    2 Turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    3 While connected to the iPhone charger, try to reset the iPhone. Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or battery symbol appears. If the battery symbol appears, continue to charge iPhone until it is fully charged.
    Message was edited by: Ingo2711

  • My screen has suddenly gone dim. The lightness control is set to the highest level but the screen is still very dim. Any help?

    I thought it might be the power saver or something but all is as it should be as far as I can tell.  Any suggestions or help would be appreciated.

    I found the solution from another users question and response.

  • My screen has suddenly gone black

    My screen was working yesterday. This morning it is black.  Tried a few different things. On/off, let it set, Cmmd, opt, p,o. None seem to be working.

    Hello Harryjarvis3,
    The article linked below provides some additional troubleshooting steps that can help restore functionality to your display.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Cheers,
    Allen

  • My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    My macbook pro's screen display has suddenly gone into a strange colour setting where everything appears in a kind of infrared colour palette an I can;t seem to change it back.  It's the same for all icon and websites, does anyone know how to restore?

    Wow!  I think I had this same issue just last night.
    I was cleaning my macbook pro retina on the outside.  Then I opened it up and was wiping dust off the monitor and I can't pinpoint exactly when, but the colors changed suddenly.  It looked super strange, it was like green halo's and it looked worse when looking at it at an angle.  Of course I took no pictures!!!  I was freaking out that my 2 grand laptop was busted and I somehow removed a protective film or something.
    But I digress...  The image looked very green and spacey, it was almost a neat effect.  After about 5 minutes it started to look a little more digital though.  There were straight lines of this halo effect on the edges and top.  After about 10 minutes it turned into a predominate issue with the blacks on screen.  I could open a web browser and it was unnoticable on a white background.  After about 15 minutes, you could only barely see the green cloud effect if you looked at the monitor from an extreme angle.  After about 20 minutes, it was completely back to normal, I almost feel paranoid like I see a halo or something strange.  But I believe that might be all in my head now.
    So yerp, lemme know what you guys figure out.

  • HT201412 my i pad has suddenly gone on a rolling blue screen of death?

    does anybody know how to resolve an i pad that has suddenly gone on the blue screen rolling death?

    I to have had the Blue Screen of Death . I have tried to reset my I pad , and I have even reset the whole system to the manufacturers setting when new . I still get the sudden Blue Screen Of Death and have to do a hard reboot and than I can't use the I pad for no more than 2 minutes before it goes to the Blue Screen of Death . Help any one !

  • The screen has suddenly dimmed, how do i get it bright again?

    the screen my iphone 3gs has suddenly gone dim, how do i get it bright again?

    If you can see anything on the screen , go to Settings > Brightness and turn it up.  If that doesn't work, press and hold both the Home and Power buttons until the phone restarts.

  • My iPhone 5 has suddenly gone black and I cannot  see anything on it but the phone rings when someone calls and can pick the call, but cannot view anything

    My phone has suddenly gone blank, total black screen can't even dial any contacts but the phone does ring

    Reset the phone (no data loss): press both the home and power buttons for up to 1 minute, releasing when the Apple logo appears.

  • My ipad Classic has suddenly gone dead - no indication of charging when plugged in - nothing! Is there any way to reboot it?

    After about five years of reliable use, my ipod Classic has suddenly gone dead. Charging seems to have no effect - no sign of life. Is there any way of rebooting it?

    Start here... http://www.apple.com/support/ipod/five_rs/classic/
    If you try the above and all else fails, leave the iPod unplugged for a few days. This should drain the battery. Once that's done, plug the iPod into power and wait (for up to thirty minutes) for the screen to turn on and charging to begin.

  • My iPhone 4s has suddenly gone to a black screen!!

    my iPhone 4s has suddenly gone to a black screen and so i connected it to iTunes to restore it. the error message; the iPhone could not be restored. this device isn't eligible for the requested build. what do i do????

    Charge using the AC adaptor for at least 30 minutes, and if not on repeat the reset. 
    If still not responding, there is a hardware problem that needs evaluation by Apple or an Apple authorized service provider.

  • Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

    Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
    == This happened ==
    Every time Firefox opened
    == About 2-3 days ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

    I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
    In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
    Here is a run-down of my process:
    0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
    1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
    ( you have to make sure you have nothing running when you execute the installer).
    2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
    3. I then went to My HD -> Library -> Internet Plugins.
    Remove the file and folder named "Flash player.old"
    4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
    5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
    Hope this helps.

  • My phone has suddenly gone blank. I am unable to turn on the phone. What should i do?

    My phone has suddenly gone blank. I am unable to turn on the phone. What should i do?

    Do a reset, hold down the home/power button together until you see the apple log and then release, then wait for the phone to boot back up.

Maybe you are looking for

  • Display issue coming out of sleep (w/ external display)

    Hey everyone, I've a MacBook Pro with Retina display. running 10.8.2 (and Win7 x64, via Bootcamp). I somtimes experience trouble coming out of sleep with no external display connected, if the MacBook was connected to an external display when I sent i

  • Impossible to open number, error -1712, and file iWork's not found in the preference menu.

    Please help, I am bloqued with this damned machine !

  • Why won't PS CS6 load my gradient overlay swatches now

    I create a new layer add a gradient overlay and try to click on my gold gradient, click it, click ok, and its showing up that default grey, black, white one. It was working just fine a few days ago now all of a sudden it doesn't work. Can anyone plea

  • How to print borderless

    If I use my Canon easyprint utility to select a photo and ask it to print borderless on 4" x 6" photo paper, it does so effortlessly. However If I select a photo in lightroom it always puts borders around the photo. Isnt there some simple setting to

  • Urgent: Update terminate:

    Dear SAP GURU's In the Sales billing screen VF01: While trying to process billing the documents the follwoing error comes : "UPDATE WAS TERMINATED" In the inbox the follwoing message appears: Update was terminated System ID....   MRD Client.......