The screen is black wont do anything.
I went to turn on my macbook air but then the screen went black. It won't do anything. I plugged it in to the charger but nothing happened. It is getting very hot. The apple in the back is also on but nothing is happening. Last time I used it I was just watching netflix and after I finished I turned it off. But the other days I did the same thing but I didn't turn it off I just closed it and left it like that and no problem had occurred. Today when this all happened abour half an hour later it cooled down but nothing is happening yet. I think I have the latest update but im not sure. I pressed on every single button there is and nothing is happening. I haven't tried anything yet except for the charger which did nothing. Please help.
Hi. When it goes orange, it means it's charging the battery.Did you have it unplugged from the power cord when this first happened? Running on battery only? Let it stay plugged in for a little while. Then I want you to try something that worked for someone else. Next time you try to start it. Hold down Command/Option/Shift Keys and power button for 10 seconds. Then without letting up on the power button, hold down Command/R. This sometime will get it to turn on and go to the recovery screen where you can use disk utilities to check the drive. Or if no problems found, go back and reinstall The operating system. To see if it is on but not going to screen ,you can close the lid and see if the light on the front comes on. If it does then open lid and tap on the space bar and also try toggling the F 2 key When you did the command/option/p/r at startup you should have heard a chime sound. Did you?
Similar Messages
-
IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!
It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes
-
I installed ios7 on my iPad 2 yesterday, this morning it wouldn't open the weather channel app. I thought maybe I should power it down. When I held down on the power button the screen went black and now it won't do anything. What do I do now?
Try a reset: Press and hold both Sleep/Wake and Home buttons until the Apple logo appears.
-
I haven't been able to find any answers that solve my problem. My Ipad will not leave the Apple logo. I hold both buttons and the screen goes black and then the Apple logo immediately pops back up. I can't get the red slider screen at all. No matter how many times I hold down both buttons the screen goes black and then the Apple logo pops right back on.
Before you do anything else, try charging via a wall outlet for a while, since its off. Then try turning it back on.
When you put the device into recovery mode it allows you to restore the device when no other options work. You do risk losing everything currently strored on the ipad itself. Hopefully you've performed regular backups either via itunes, icloud or both. Evern if you have synced content to either of those, you may not lose everything. All previous purchases have been saved in the itunes and app stores, so you can dowload them again.
while the ipad is off, press and hold the home button and plug the usb cord into the ipad. You should see a message pop up on the itunes window on your compoter screen that state it has discoverd an ipad in recovery mode.
You should now be able to restore -
My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black. I turn it off and then on again and the start up noise goes but it is still black - Help!?
Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice. -
I'm trying to backup my iphone and restore it because the screen has gone black. It won't allow me to do anything without putting in the passcode. I can't put in the passcode because the screen is black.
Try rebooting it (hold home and power together for 15-20 seconds). If the display doesn't come back to life, you're out of luck. You're supposed to back it up before it fails. It's too late to do so after the fact.
-
My screen wont turn on, and the screen is black. It was working fine, but then it just turned off. The only way it will work is if I close my laptop, and pinch the two screens together
You have a hardware problem and you should take it into a apple store to be looked at and fixed.
-
I was happily using my 11inch 2012 Macbookair. The screen went black and the machine died. Was fully charged. No sign of anything. Will not restart
ALSO I tried to reset the SMC nothing no response what ever.
-
After unplugging my phone from being charged all night, the screen went black and will not let me do anything including turning it off. please Advise. Thanks
press and hold the home and power buttons until the Apple icon is displayed, then let go.
-
my iphone 4 just turned off and the screen is black and it wont turn on . its in perfectly good condtion and ive had it since april , help please?
I've tried that. It doesn't work. The only thing that happens is the apple comes up. I've tried holding the home as I'm plugging it in and keeping it held for a few minutes, but nothing happens. My iTunes doesn't even read that it's connected.
-
My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.
Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem! -
my iphone fell on the floor and the power botton wont work and also the screen went black i already tried to reset it throun itunes but the phone did not connect and i dont know what to do
You can take it to Apple and get replaced as long as you pay for the replacement.
Allan -
I've added songs and vedios to iTunes in my computer then I synchronise it with my Ipad3 ..... For the songs it was OK but for the vedios I got a message that some format are not supported then the screen became black with no video or sound ....how can I get back the vedios...I'm afraid to make reset to the iPad otherwise I'll loose all the applications and media.. Any ideas please .... Thanks
First of all - depending upon how you define resetting the iPad - you will not lose anything. If you erase all contents and settings - then you will lose everything. Don't do that!
If the videos are not in the correct format - launch iTunes on your computer. Click on one of the videos in your iTunes library in order to select it. Then go to Advanced>Create iPad or Apple TV version and see if the video will convert. Do the same for the other videos and then select those to sync again with the iPad.
To get the videos app working again, first quit it completely and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If the videos app still doesn't work, try this.
Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. when the movie appears in the search - tap on it and it should hopefully start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK. -
I m using win 7 home premium 64 bit edition. Yesterday night i updated the firefox to the latest 8.0.1 version and as soon as I open the window parts of the screen becomes black and starts flickering a lot. Can use everything on my laptop except browsers.Cant use it anyhow and also my internet explorer stops working when i try to download anything.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G, $99 for the other 4Gs, $99 for the 16 GB 5G and $149 for the other 5Gs. They do not fix yours.
Apple - iPod Repair price
Sometime it takes a little while for the water to damage the iPod.
Maybe you are looking for
-
Transfer Data from SAP R/3 to BI - Urgent
Hi all, I need to transfer data from one of my SAP R/3 server to Infocube 0FIAR_C03. How can I do that? Please tell me step by step procedure. Please respond. Regards, Aisha Ishrat ICI Pakistan Ltd. Edited by: AI on Dec 27, 2007 9:38 AM
-
Hi Frendz.. I want to know how we can build a callable obj which have a two buttons those r Accept n Reject accordiing to the actions on these buttons flow should forward to next screen(approver ) r sent back to the sender(screen with reject). I gon
-
Can anyone help me get my Apple TV display to stop blinking on and off every second?
Hi, My Apple TV is a little under a year old its not version 1 I'm pretty sure it's 2... When I started it up the other night it came on but the display in the screen was blinking on and off about one a second non stop. The white light on the Apple
-
Not displaying Actual cost Line Items for Order
Hi Gurus, Recently we did patching from SPC6 to SPC8. After patching we noticed that could not able to see displaying Actual cost Line Items for Order from work order. System is not throughing error message when I double cline on line item at Plan/Ac
-
It takes time before the system is working properly
Hi, This morning something strange happened. Turn on the iMac, the chime is there but when using the audio control keys (F4-F15-F16), nothing happened. Trying to quit an application (like iMail) from the dock does not work either. The icon in the doc