The screen on my iPad 2 goes white when I turn it on and black when I turn it off.

I've tried pressing the power button to reset it but nothing shows up.
The screen occasionally goes white as if I received a notification supposedly on my lock screen. Of course, it's just white this time.
I've also tried plugging it in but nothing works either. So I don't think it's a power problem.
I tried to plug it into the computer and bring up iTunes and checked to see it wasn't a storage problem either.
I can't back anything up since there isn't one on my computer and I don't have enough space on my hard drive to back it up.
I've had this iPad for around three years though and it's still in good shape.

To reset your iPad you have to push the Home and ON/OFF buttons at the same time.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Try that.

Similar Messages

  • I have the ipad3,and I plug my charger in to charge my ipad and it comes up with the charging battery sign charges for a few minuets and then the white apple sign loads up into the screen then my ipad goes dead again,I hope someone can help:)

    I have an ipad 3, when I plug my charger in the ipad comes up with the sign to say it is charging and then the apple sign loads up as if the ipad is about to come on,but then the ipad just goes dead again,I've tried holding both buttons down and I have also tried charging it over night but still nothing is working.
    I hope someone could help:)

    When you say you tried holding both buttons, did you mean you held both the power and home buttons until the apple logo appeared, ignoring the red slider if that appears?  If so, exactly what happens?
    You may need to take the iPad and charger to an Apple store genius bar to be tested by the techicians.

  • Hi when I stream video content to my Tv using Apple from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help

    Hi when I stream video content to my Tv using Apple tv from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help would be most welcome.

    Welcome to the Apple Community.
    Contact the developer of the Air Video app.

  • Can anyone help me connect my Macbook Air to a SAMSUNG TV.  When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart th

    Can anyone help me connect my Macbook Air to a SAMSUNG TV.  When I follow the basic instructions (Thunderbolt to HDMI connection) the screen on my computer goes grey and an error message appears inviting me to press any button to restart the Macbook.  When I do this nothing happens.  Only when I disconnect the computer from the TV does the Macbook allow me to login. The TV does not receive any signal from the Macbook even though I know the HDI port works fine.  Any ideas what I'm doing wrong?  Do I need to enable something on the Macbook?

    An update...
    I downloaded Apple's (rather large!) list of software updates today, and I was finally able to recognize my iPod again. I did a restore using the iPod updater from 06-2006, and all seemed to work OK. (I'm afraid to try the new one again!)
    Then I tried to re-load my music library from iTunes, and got stuck. It froze up after a while and wouldn't go any further.
    When I disconnected my iPod from my computer, I find 2 podcasts and nothing else, though iTunes told me it had transferred 600+ songs. Those 2 podcasts do play fine, and the basic iPod software all seems to be intact.
    So -- anyone get through this connection problem and have any ideas to share??
    iMac Mac OS X (10.4.7)

  • HT204291 Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    Does anyone know why when streaming a movie from my iMac the screen on my tele goes grey but I still get audio. It only happens when using the DVD application on the mac. iPhoto streams fine.

    You are prevented from Airplay mirroring certain things like DVD content as the material is usually protected so you get a checkerboard type display.  I think there is a theoretical risk that the Airplay stream could be intercepted and the protected video copied, albeitin lower quality.
    Apple may be being cautious or are required to do so with the DVD player app by movie studios/licensing authorities.  It makes no sense to the average consumer who is just trying to send their purchased DVD to the TV via the computer and AppleTV.
    Playback in something like VLC should work - not tried it myself but others have commented it doesn't have the restriction.

  • Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    Is it a common occurance for an iPad 4th gen to just blank out and stop working?  The screen shows nothing at all, no sounds but it registers on my computer when connected.

    A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
    No content is affected by this procedure.

  • My iphone 4 the screen was totally blanck like white screen nothing is visible it is in 90 days warranty now i am new delhi

    my iphone 4 the screen is totally blank like white screen nothing is visible.replacment done in dadeland mall apple store on 19th of janvaury 2014 this month and it has got 90 days warranty.now i am in new delhi,India.I have called to apple care USA and they have given the toll free number of india they said it a hardware problem and this has to replace only in USA .now i am not going to USA so i would like to request you that please arrange to replace or repair my iphone 4 in apple care centre at new delhi as this iphone has a warranty just they can send the message and apple care people will take care over here as i bought many product from Usa like HP laptop ,sony camera and other things and they have given the international warranty and over here all the sevice centre will take care so why not apple care peoples take care?
    i am waiting for your favorable action and reply
    thanks
    Rajeev Gupta

    Please disregard this question. I'll submit a shorter and more direct question. Thanks.

  • Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the  brightness is to low and i can see any thing

    Hay. i change the screen LCD in IPAD 2 3G but i don't know what happen. She was working and every thing it's ok. One time i turn off the ipad and turn on more time, i don't see good in LCD the  brightness is to low and i can see any thing!! and i want to know why is happen

    Assuming you mean that you performed the repair yourself, it would seem that you either obtained a defective screen or you did some sort of damage when you replaced the screen. You can try asking for assistance on ifixit.com, a site dedicate to those attempting their own repairs, or you can take the iPad to a shop and pay them to try to correct the problem for you. Apple will no longer touch your iPad now that you've attempted your own repairs.
    Regards.

  • The screen on my ipad became pixelated than went black.  I can't get it to start up what to do?

    the screen on my ipad 3 became pixelated then went black.  it wont start up what should I do?  Is this what happens when the battery fails?

    Mine did something similar about a year ago.  It became pixelated like this:
    http://ipadhelp.com/wp-content/uploads/2013/10/ipad-screen-colour-problem-620x40 0.jpg
    Then the screen went black, but I could tell the iPad was still on (it was still making sounds when I did things like take a screenshot).
    The thing that eventually fixed it for me was slapping the screen with an open hand (not joking).  It still becomes pixelated if it gets bumped or dropped, but the "smack the screen" trick seems to work.
    Good luck!

  • Why does the screen on my iPad mini jump around?  Apps open and close, I can't get back to the home screen.  Is my mini possessed?

    Why does the screen on my iPad mini start jumping--larger, smaller--can't close apps.  I reboot and still it happens.  Any suggestions?

    If the unit has NEVER been jailbroke, first try a system reset.  It cures many ills and it's quick, easy and harmless...  Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • I switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it

    i switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it  please advise

    You should be able to turn it off on the iPad by using 'a tap-to-select and then double-tap to activate/type process' and 3 fingered scrolling to go into Settings > General > Accessibility and turn it 'off' (so to use the 'slide to unlock' tap the slider and then double-tap it, and to type your passcode tap a digit and then double-tap it etc), or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

  • The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The screen on my MacBook goes black often. I can still see a faint image of what's on the screen, and can only get it to illuminate by moving it back and forth. What could the issue be? How can it be fixed?

    The startup disk may need repairing ...
    Launch Disk Utility located in HD > Applications > Utilities
    Select the startup disk on the left then select the First Aid tab.
    Click:  Verify Disk  (not Verify Disk Permissions)
    If the disk needs repairing, restart your Mac while holding down the Command + R keys. From there you can access the built in utilities in OS X Recovery to repair the startup disk.

  • The screen on my Mac is white with the apple icon and the spinning timer and won't boot up

    The screening on my Mac is white with the apple logo and a spinning timer and won't boot up

    Take a look here to see if any of the suggestions help:
    http://support.apple.com/kb/TS2570

  • The screen on my Macbook goes blank, if I tilt the screen it returns. Problem getting worse.

    The screen on my Macbook goes blank, if I tilt the screen it returns. Problem getting worse. Should I take it to the apple store and see if they can replace the screen? is it expensive to replace the backlight/invertor?

    This sounds to me like a fairly common Inverter Fault.
    It is not the screen that needs replacing by the sounds of it,
    It sounds like either the inverter board or the inverter cable needs replacing.
    My understanding is that inverter / inverter cable repairs aren't too expensive, but not too cheap!
    Obviously your best way to find out how much it would cost to be repaired would be to take it in to an Apple Store, as I have never had to have one replaced myself, but the information I'm providing, is based on what I've read elsewhere.
    How old is the MacBook?
    Thanks,
    Ollie.

  • I have broken the screen on my ipad it is a retina display but it still works i would like to exchange

    I have broken the screen on my ipad it is a retina display but it still works i would like to exchange

    What country are you in ? The price for repair (i.e. replacement) for the iPad 3 and 4 appears to be around the €300 mark
    If you select your country at the top of this page, then select the 'Warranty & Service Pricing' section on the left of the screen, and then 'My iPad is not eligible for warranty service' section on the right, you should be able to see the price in your country.
    Edit : link added
    Message was edited by: King_Penguin

Maybe you are looking for

  • AAE_IDOC between ABAP 7.40 system and PI 7.30

    Hi all, Currently we are facing a problem with a partner who upgraded a ERP system to SAP Basis 7.40 while PI is still running on 7.30. Now they try to connect this system to PI 7.30 with the java Idoc adapter, as is working in other systems not yet

  • Problem in calling an Unix script in Sunopsis!!!

    Hi, I have written a script in UNIX and when i call in it Sunopsis using the OS command and run,in the operator it says " Wrong Process Code " The script runs fine when run in UNIX shell.But why it is throwing an error when called in Sunopsis.Am i mi

  • Timeline for imported .dv file?

    Hi all, I'm trying to do something very simple, however I cannot find a way to do this. I have a 1.5 hour long video that has been imported into iMovie (began its life as a .m4v which I converted to .dv). I am just trying to have a timeline so that I

  • Number of conflicts while synchronizing: 4 SyncResolver.INSERT_ROW_CONFLICT

    Hi All, I have a problem saving edits and new rows to a data table. I get the following error Number of conflicts while synchronizing: 4 SyncResolver.INSERT_ROW_CONFLICT This is described as : Indicates that a conflict occurred while the RowSet objec

  • On the iPad when I click on photo app it won't load

    MMy photo app won't load. Why not