The screen on my laptop goes blank suddenly; is there a way to fix this?
Last night my computer shut off without warning and when I tried to restart it and all it would do was beep continuously(beep-five seconds-beep). I say shut off but it wasn't completely powered down because I could still hear the fan going. I finally got it to restart in safe mode then restarted it normally from there. It's been working fine since then expect that once last night after getting it back on and twice today the screen has suddenly gone blank/black and I've been unable to operate it and had to force shut it down and reboot to get it to work again. Anyone have any idea whats causing this and how/if I can fix it?
http://support.apple.com/kb/ht1212
This article addresses the issue you're having. Best of luck!
Similar Messages
-
Hi, My Apple TV changes the screen resolution every 10-15sec. The device is up to date and video setting are done correctly. It is connected to Philips 42pfl3507. What should I do to solve this issue?
Thanks for your help.
DucciPThis sounds like a problem beyond resolution.
I'd start by restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router.
If that doesn't help, try a restore.
If the problem continues:
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports 720p (Apple TV 2)
Try the Apple TV with another TV -
I am running Firefox 9.0.1 in a windows 7 environment. This is a problem that I had with Firefox 8, as well, though it was only when I opened my home page, not any new window.
I prefer new window viewing to tabbed viewing and when I click a link to and a new browser window opens, all of my basic control buttons (forward, backward, stop/reload) are greyed out except home.Hi,
An extension could be causing the issue. Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
I have created a website with Adobe Muse and I am using an adobe edge web font that looks great on all browsers except for google Chrome... On chrome the font looks fuzzy and broken-up. Is there a way to fix this??? Thanks.
Thank you Sanjit,
I have redone the site using using the font TREBUCHET. The font that I was using that was giving me the problem was EXO which is an Adobe Edge Web font. I'd rather use EXO... Here is a screen shot of a sample page, areas where the type looks especially messed up are circled in red.
This only happens when opened in Google Chrome on a Windows PC. However it looks fine with Chrome on my MAC.
Regards,
Jan -
The screen on my Macbook goes blank, if I tilt the screen it returns. Problem getting worse. Should I take it to the apple store and see if they can replace the screen? is it expensive to replace the backlight/invertor?
This sounds to me like a fairly common Inverter Fault.
It is not the screen that needs replacing by the sounds of it,
It sounds like either the inverter board or the inverter cable needs replacing.
My understanding is that inverter / inverter cable repairs aren't too expensive, but not too cheap!
Obviously your best way to find out how much it would cost to be repaired would be to take it in to an Apple Store, as I have never had to have one replaced myself, but the information I'm providing, is based on what I've read elsewhere.
How old is the MacBook?
Thanks,
Ollie. -
My itouch won't turn on. All that shows is the apple icon and then the screen goes blue to white. Is there a way to fix this or is my itouch unfixable? HELP ME!!!
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Apple 10.7 lion - macbook does not turn off when plugged in. I put the laptop on "sleep" or close the screen and the computer stays on and stays hot! This has been happening ever since the upgrade to Lion! Is there any way to fix this? FIX THIS!!! MY MACBOOK GETS TOO HOT WHEN I CLOSE THE SCREEN BECAUSE OF THIS ISSUE!!!! FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!!FIX THIS NOW!!! This only happens when it is plugged in!!!!! Any way to fix this? Help.. :-( Please!!!!!!!! The light stays solid when plugged in on sleep mode!!! This *****. Help..
I figured it out! I don't fully understand why, but when I uninstall ESPOINAGE 2 from my laptop, sleep works fine now.. Weird!
-
Whenever I put my earphones into my iPod Touch 2g the music isn't clear and I have to push and hold them in order to hear the song normally. It isn't the earphones because I tried another pair, that worked fine, and there was still no difference. I also use the same pair of earphones in my laptop and it sounds great. Is there a way to fix this problem without having to buy a brand new iPod touch? Do I need to clean it or something? And if so, how would I go about doing that? Thanks!
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
If still problem that indicates you have a bad headphone jack.
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours. Likely not worth it for your old 2G iPod
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit -
My 3rd gen iPod touch has a very dim/dark screen and no screen response. I've restored it, still nothing, put a new screen and digitizer and still nothing. I've reset it a 1000 times and nothing works. Is there a way to fix this? It previously had "activation required" on the screen but now it just says "ipod" what do I do now?
Could be due to many things. You could have damaged something during the screen replacement. I would take it to someone with more experience.
-
I've been having an issue with assistive touch, every time I open an app. the AT disappears the from the screen and I have to turn it off and ON again. Is there a way to fix this?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
Question 2 (related):
This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
Thanks for reading this.
el7Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
-USB-to-VGA
http://www.cablestogo.com/product/30545
-Convert s-video or composite video signals to high resolution VGA
http://www.cablestogo.com/product/40971
The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
el7 -
My MacBook Air 2012 turns on an the key board lights up however the screen stays black but when I shine a torch through the apple sign on the back you can see the login is there a way to fix this??
1. Press the F2 key couple of times.
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
I restored my ipod before connecting it to the computar and now it just stays at the screen like when its the silver apple is there a way to fix this?
- Have you tried resetting the Ipod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.-
- Next connect it to your computer. If iTunes sees the iPod restore the iPod, First restore from backup and if problem persists restore to factory defaults/new iPod.
- If iTunes does not see the iPod first try placing the iPod in recovery mode. If not seen try placing it in DFU mode:
Recovery mode:
iPhone and iPod touch: Unable to update or restore
DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I have the kin 2 and whenever I turn it on, it does the introduction (pictures, ect.) and the pictures go on for about 3 minuets. but then when it is done, the screan turns blank. is there any way to fix this problem?
I have the EXACT same problem. I just got done talking with Verizon, and a replacement is on the way.
-
I recently switched from 4S to Galaxy S4. I am not getting texts from iphone senders. When the message is sent it goes as a imessage. How do I fix this??
Turn off iMessage on the iPhone as should have been done prior to switching devices.
Settings > Messages > iMessage > OFF
Maybe you are looking for
-
Dropped iphone 5 and damaged edge can it interfere with connection
I dropped my iPhone 5 about 4 feet onto a tile floor. It landed on the edge and took a good chuck out of it. Since then, I seem to be having trouble connecting to my network. No trouble with calls or texts, but trouble with internet, app store, et
-
I've searched but I can't find a way to trim a stereo audio track dissolve that trims both channels at the same time. I can only seem to trim one channel of the dissolve at one time. Track headers are on and the audio is stereo for sure. I'm sure it'
-
Beginning Inventory calc in ASO
I'm just trying to put a simple calculation to link the beginning inventory balance to the prior period ending inventory. Here is what I put on the member formula: For Apri (April as the first month of the fiscal year) Beg Balance = (PrevMember(Year.
-
How do I change Apple-id on IPad?
How do I change Apple-id on IPad and IPhone?
-
MMC card and MP3 player - 1/2 capacity after format?
Hi, I got an MP3 player (1 Gb) and a MMC card (2 Gb) and after format in a USB card reader from OS X 10.4.7, they are now 512 Kb and I Gb respectively. MS Dos or Mac format doesn't matter. Is it a USB 1 or 2 problem? Any one know about this? EF