The screen on my powershot a2500 is black when I try to take a picture.

The screen on my powershot a2500 is black when I try to take a picture. Is there a fix?

Several items to check:
Are the batteries fully charged? Low batteries can display photos, but may not have enough charge to snap a shot.
Are you using flash? If the batteries are low, it may take some time for the flash to charge up and display the scene on the screen. The screen will stay black until the flash is ready.
Are you outside on bright sunny day with polarized sunglasses on? Try without sunglasses on if this is the case.
Has the camera been dropped at all? Even a soft drop can loosen up the ribbon cable that goes to the LCD screen.
Are you able to see the menus? If you can, try a camera reset to defaults in the tools menu to see if that clears it up. You may have accidentally changed a setting that turned the screen when shooting. If not, remove the batteries for a few minutes then press the shutter button for a few seconds. Reinstall the batteries and see if that cleared it up.
If none of these work, you may need to send it in for repair. You will need to decide if it would be worth it or not if it is out of warrranty.
Steve M.

Similar Messages

  • The screen on my iPhone 6 turns black when on a call

    The screen on my iPhone 6 turns black when I am on a call (and then I cannot end the call)

    My iPhone 5s did the same and my company sent me a new one.  That one had the same problem.  I am now being told by my company that it is an app that I have loaded that is not compatible with the IOS update.  They sent me an iPhone6 and advised me to only add my apps one at a time to see which one is causing the problem.  Verizon, I was told, has been working on the problem as well.  Don't know if all this is true but sounded right to me.

  • There are colors on the screen when I try to take a picture. Please help.

    Hi, I'm not sure if I'm in the right community but when I try to take a picture I look at the screen and it has a white line going through the top part of the screen. There are white spots all over the lens. There is blue and red parts in the camera. When you move the phone the colors move around. The camera is very blurry and is not focusing.

    Sounds like software - Hope you have a recent back up already as with this issue do not really want to make a back up of the device now.
    Will want to restore the iPhone and after restore 1st set up as New and test the camera after setting up as new.
    If good then can try to restore from a back up. If still good, good. If notice same thing with camera after restoreing from a back up when that back up is no good, will have to erase all content and settings and continue with set up as new.
    Good luck!

  • I have a 4s and the camera keeps shutting down when I try to take a picture.  What's going on?  What is the solution?

    I have a 4s and the camera keeps shutting down when I try to take a picture.  What's going on?  What is the solution?

    Delete all data from following location on your machine and try updating again.
    Mac OS: ~/Library/Application Support/Adobe/AAMUpdater/1.0/
    Let me know if it works for you.
    Regards,
    Ashutosh

  • I shattered the screen on my iphone 5s and now when I try to sync it with itunes it is asking to enter the passcode on the phone. How do I get around this considering my screen is broken?

    How do I sync my broken iphone 5s on itunes without entering the passcode on the phone? I have the replacemnt phone already but I would like to save my photos before I send it back. The screen is completely ruined.

    Did you try to set it up again as new device?
    How to back up your data and set up as a new device

  • I have a Canon SD 970 IS. When I try to take a picture it tells me the card is locked.

    My Canon SD 970 IS is telling me my card is locked and I can't take pictures.  The battery is fine, there's plenty of room on the card.  Can someone please tell me how to fix this.

    Unlock your card. There is a small lever on the side of the card, slide it to unlock position.
    http://www.ccwitness.com/images/SDCARD-lock-location.gif
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • My ipod touch 5g wont take pictures, i downloaded at least 4 different camera apps but when i try to take a picture, it just goes back to home screen. what do i need to do?

    ?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

    When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

    Read here:
    http://help.apple.com/ipad/8/#/iPad9a245e3e

  • The screen on my iPhone 4 turned black while i was using it-it was not dropped or damaged in anyway. The phone itself is still working as it comes up in itunes when I plug the phone into my computer, but the screen is completley black. What can I do?

    The screen on my iPhone has gone black while I was using it. It just "shut off". The phone is still working  as I can hear/see it when it plugs into the computer, but the screen just wont turn on. I've tried the soft reset "holding down home and lock screen" and i've tried to restore settings. I went to the apple store and they said I had to send it to my provider (in another country) but my phone contract has run out.
    Is there a way to fix this?
    If not, is there some way apple can replace the phone? It's less than 2 years old. Surely the screen shouldn't just give out like that.
    Thank you

    You wrote...
    ' What can I do to solve this'
    What have you tried...?
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...

  • My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable.  When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

    I have had a 3GS for 2+ years.  After upgrading to IOS 4 (now 4.3.5) I began having problems.  In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that!  I connected to itunes and it did restore from a backup but it is a major inconvenience.  I am also searching for answers, but better back-up regularly!

  • I want to uninstall Acrobat reader. I got support in the community to access my HD and to send to trash the internet plugs in for PDF viewer, but when I try to download a PDF from internet a black screen appears and preview doesn't open

    I want to uninstall Acrobat reader. I got support in the community to access my HD and to send to trash the internet plugs in for PDF viewer, but when I try to download a PDF from internet a black screen appears and preview doesn't open

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.

    I am trying to hook my macbook pro to a projector, which has a VGA cable. I bought a VGA to HDMI adapter, but whenever I hook it up, the screen on my macbook just goes black and I can't make it do anything else or even show up on the projector.
    My laptop is still on; it just has a black screen that I can't get rid of without shutting down the computer by holding the power button.

    Hey there lynmrigg,
    It sounds like have an HDMI to VGA adapter connecting your MacBook Pro and your projector but the screen on your computer goes black and no image appears on the projector. I would use the troubleshooting in the following article to help resolve or isolate the issue here, named:
    Apple computers: Troubleshooting issues with video on internal or external displays
    Try unplugging the video adapter or cable and then plug it back in.
    If more than one video adapter is in use (or "daisy-chained"), troubleshoot by using only one adapter.
    Example: A mini DisplayPort to DVI adapter connected to a DVI to HDMI adapter is an unsupported configuration because there is a series of adapters in use.
    If available, try using a different display and or adapter (or use a different connector by using DVI instead of VGA, for instance).
    Reset the system
    You can reset the Mac's parameter RAM and SMC.
    Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... An

    Hi...
    My name is Turgay and have been using computer since 1982... 2 years ago, because of my friend's advice, i bought an iMac... It was the first Mac that i use... Till that, i was using normal PC's...
    I bought an 24" iMac on July 2009 and started to use... I realized that i spent my 27 years for using (fixing) computers. Because the Mac was perfect. After iMac, i was really fine with my computer... But after something, that doesn't bother me, happened. The screen started to get cloudy and black... And it increased. Because of this i took my iMac to your authorised distributor http://www.bilkom.com.tr...
    They changed my screen but in 2 months it happened 3 times and i wanted them to change my iMac with new one, under customer laws... In our country, the device must be changed with new one if the same problem occurs in 3 months. Because i know the customer satisfaction of Apple, i didn' worry about it but Bilkom refused my will... I spoke with them for 2 months but nothing happened, they just told me, it' not our problem.
    Because of this speech, i sued them on June 2011... Last week, i won the case but just for the return of invoince... It costs 3.200 Turkish Liras (1.800$) and there's no 24" iMac unused... Bilkom again refused to give me an iMac... I thought that Apple's customer satisfaction can't be like this... I didn't write anything to Apple till now but if i can't get an iMac, i must return to normal PC after 2 years... And i don't want that... I offered an iMac 27" with core i7... No matter Bilkom accepts or not, they don't care of me... I'm a customer, they should do... I've never seen such a like company. I hope the real Apple will help my problem and save me from Bilkom...
    Waiting for your reply... Thanks and regards...
    Turgay Kala
    General Manager

    Unfortunately, you are not communicating with Apple here - we are all other users volunteering our time to help with technical problems.
    Here is a list of Apple contacts; there is no email address  - you will need to write a letter to their corporate headquarters or call them:
    http://www.apple.com/contact/
    Although, it appears that your problem is with a third party store and that you have won in court - did you get your money back? 24" iMacs have not been made since 2009 or 2010. Now there are 21" and 27" iMacs.

  • My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    My ipad mini is cracked in the bottom left corner of the screen and their is a thick black line with smaller coloured lines within it, is their anything I can do to fix it?

    Does this only happen on specific pages?
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can try to disable notifications as a test (you may want to reverse this).
    You can try to set the dom.webnotifications.enabled pref to false on the <b>about:config</b> page.
    *http://kb.mozillazine.org/about:config

  • My iPad 2 sometimes has colored lines, as failures all over the screen and sometimes gets to be black whole ... What do I do?

    My iPad 2 sometimes has colored lines, as failures all over the screen and sometimes gets to be black whole ... What do I do?

    Sounds like a hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Maybe you are looking for

  • Get the item level permission in sharepoint 2013 uisng rest api

    I created the test list  and i created the 5 items in that list. I stopped the item level permissions. I shared the list item with userA. In the rest api response, it giving the other users also (means user who is not having permission to the item).

  • How can I set a different default drive to burn disks

    I use an external DVD/CD drive to burn disks. I want to set this as the default drive for disk utility to burn disks rather than the intertnal superdrive. How do is do this?

  • After reboot cluster node went into maintanance mode (CONTROL-D)

    Hi there! I have configured 2 node cluster on 2 x SUN Enterprise 220R and StoreEdge D1000. Each time when rebooted any of the cluster nodes i get the following error during boot up: The / file system (/dev/rdsk/c0t1d0s0) is being checked. /dev/rdsk/c

  • What is JVM INSTR pop?

    Hi, Who give me meaning or utility of this code patches and importance: JVM INSTR pop ; if(true) goto L2; else goto L1 _L1: Example General method of this code: public final synchronized int a(byte abyte0[], int i, int j, int k) throws IOException _L

  • Batch Determination in COGI

    Hello Experts, I meet a issue in batch determination when do COGI: for some coponents, I just select the components line and post, the batch is automatically determined, for some other components, I need to click into details screen and mark that lin