The search has timed out.

Hello forum.
When I use the search api, the error message is displayed when I search:
"The search has timed out. More specific search criteria may be required."
If I use the same search terms at search portlet the result is ok.
This is my code:
portal.wwsbr_search_api.submit_search (
p_search_terms=> 'contas',
p_search_operator => 'containsall',
p_caid=> 33,
p_language=> 'ptb',
p_folder_id=> 1,
p_folder_caid=> 33,
p_include_child_folders=> 1);
the page can be accessed by http://www2.tcu.gov.br/portal/page?_pageid=33,176332&_dad=portal&_schema=PORTAL
Thanks in advanced

I found some help on SDN.
But, is integrating the iView on a page and change settings for cache there the only solution, that would solve the error permanently?
Thanks
Sven

Similar Messages

Long time to load a first page, get "the connection has timed out" frequently.

Frequently takes a long time to get to first page. Even a "speed test" to check my DSL connection. Usually can get to "google.com" quickly but it did come up slow today (just a test for a simple page).
I have a wireless N router with it's own Firewall (which I didn't want) and I think I've turned it off. Symantec firewall, don't think WinXP firewall is on.
Tried refresh of Adobe Flash Player per suggestion in this forum, no help.
Would like to have a tool to see how long each step of getting to the web takes so I can see if there's a bottleneck.
Occasionally "try again" button works on the "connection has timed out" message.
My PC is 6 yr old. xp-home, lots of ram, HDD available. Run Symantec AV/MBAM frequently. Ran Housecall and Dr. Web- no problems.
Talked to my DSL provider and Symantec in depth. Similar lethargy when I get IE running but not as frequent as under FF. Measured my DSL speed - 5MB as promised.
When the lag occurs, Task Manager does not show FF taking a lot of processor time.
Have done the things suggested in FAQ to help with performance.
Also going to bleepingcomputer.com to see if there are suggestions there.
I'm hoping someone has experienced an analog to this and has a suggestion to diagnose and solve. Thanks - Mike.

Here's your sign! This is my problem and its solution. Let me know if someone needs help to interpret.
If you frequently get "connection timed out", go to your ISP and get Manual DNS addresses. Then beat them till they put a real fix on their system.
Problem is in the DNS server service provided by my DSL provider, Bell South/AT&T. Result of a poor performing DNS is that one can't get thru to the selected site.
If you do a web search +dsl +"time out" you will see the history with Windstream. THEY finally issues a system-wide fix which, it appears, flattened the issue. Then add +AT&T to see that experience. I did not read it all thru, I'm wasted chasing this problem. I don't give AT&T ANY credit for customer service or heading off problems for their customers on this one.
AT&T support offers me:
==================================== start quote.
How do I check and update my DNS settings, if my DNS settings are not "server assigned"?
When you visit a Web site, your browser sends the site's alphabetic domain name to a DNS server. The DNS server translates the domain into a numeric IP address, then responds to your computer with the Internet location of the Web site. Incorrect DNS settings on your computer can disrupt this information flow and cause your Internet browsing to slow down or fail.
If you have trouble browsing the Internet, check your DNS settings. You likely have your DNS settings as "server-assigned." This allows DNS information to be automatically sent to your computer, which may improve your browsing experience. However, you may need to have your DNS settings manually entered
Note: If you are using a router to connect to your Internet service, check with your manufacturer's web site for instructions on updating your DNS settings with the following information:
Primary DNS: 68.94.156.1
Secondary DNS: 68.94.157.1
1. Click the Start button and select Control Panel from the menu.
2. Select Network and Internet Connections.
3. Double-click the Network Connections icon at the lower right.
4. Under the LAN or High-Speed Internet section, right-click the Local Area Connection icon and select Properties.
5. From the "Components checked are used by this connection" list, select Internet Protocol (TCP/IP), then click the Properties button.
6. Read the current DNS setting on the lower half of the TCP/IP properties screen. If the radio button Obtain DNS server address automatically is selected, you do not need to update your DNS settings. Otherwise, please continue.
7. Input the new Preferred DNS server of 68.94.156.1 and the Alternate DNS server of 68.94.157.1.
8. Click OK.
9. Return to the Network Connections screen. If you have a DSL Connection icon in the Broadband section, proceed to next step otherwise you have completed updating your DNS settings.
10. Under the Broadband section, right-click the DSL Connection icon and select Properties.
11. Select the Networking tab.
12. From the "This connection uses the following items" list, select Internet Protocol (TCP/IP) and click the Properties button.
13. Read the current DNS setting on the lower half of the TCP/IP properties screen. If the radio button Obtain DNS server address automatically is selected you do not need to up date your DNS settings. Otherwise, please continue.
14. Input the new Preferred DNS server of 68.94.156.1 and the Alternate DNS server of 68.94.157.1.
15. Click OK.
================================= end quote.
So it appears I can't put screen shots in here. Well I hope you get the gist.
In fact this is a bit hosed up.
It says if you user "automatic dns" you're OK, that's opposite of my experience.
I changed to the specified DNS addresses and things seem 99.9% fixed.
I also changed my Router (wireless) settings.
If there's a survey of my experience here I'll take it.
Mike Hardy

I have just downloaded firefox onto my laptop but it wont open. I keep getting a message that says: 'The connection has timed out' Can you help

This is the message i get after a few seconds of trying to connect:
The connection has timed out.
The server at search.bearshare.com is taking too long to respond.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Is this when you install the EXE, or when you are running Firefox, or some other time?

Exchange 2010 SP3 - Search-Mailbox -DeleteContent fails: the search folder timed out.

We have a bunch of users that have hundreds of thousands of Undelivered Mail Returned to Sender email in their inbox. I believe these mailboxes were compromised and were sending out spam. We have fixed that issue, but I am trying to clean out all these messages
from their inbox. I have run this command successfully on a few users, but this one in particular is giving me troubles. This mailbox has over 400,000 items to delete so I am wondering if there are just too many to process.
Search-Mailbox -Identity EMAIL -SearchQuery "Subject:'Undelivered Mail Returned to Sender'" -DeleteContent
Here is the error:
The search on mailbox ....... did not complete because the search folder timed out.
+ CategoryInfo : ReadError: (0:Int32) [Search-Mailbox], SearchFolderTimeoutException
+ FullyQualifiedErrorId : EC2CC554,Microsoft.Exchange.Management.Tasks.SearchMailbox
I don't like the idea of having to delete these manually. If someone has an idea that would be fantastic.
Thanks

Hi,
Based on the description, you couldn't run the search-mailbox cmdlet to delete all items after several times. I discussed with my colleagues, there is a limit when trying to delete items using search-mailbox cmdlet, it's 10000 at a time if a search query
is specified. The error you got may be related to the large amount of items. Some scripts may help you to delete them all at a time, you can ask this question on the Script forum to get a better help.
As a workaround, you can create an Outlook Inbox rule for these messages and move them to a specific folder. After that, you can delete the folder permanently.
Here is a similar thread for your reference.
http://community.office365.com/en-us/f/158/t/239292.aspx
Best regards,
Belinda
Belinda Ma
TechNet Community Support

I have an itunes acct. on my PC, but itunes doesn't allow me on using that acct. info. When I try to set up a new id on my ipad it says the session has timed out.

I have an itunes account on my PC and have downloaded Kindle and iBook with no problem, but when I try and use that acct id on my iPad the system says I cannot access the store. However, when I try to create a new id the system comes up and tells me that I am from Canada, which is always nice to know in case I ever forget, and when I acknowledge that screen, it immediately tells me the session has timed out. What am I doing wrong? Willingly admit I am not at all knowledgable in the Apple world. Thanks for any help you can give..

Carmell-
When I've had a similar problem, it was because I was accessing the iTunes store from a device I hadn't used before, such as when I upgraded from an iPad 1 to the iPad 2. It was a little confusing to me until I figured it out.
All I had to do was use the ID of my existing account and play along with the iTunes store. As I recall, it asked for my password twice, and the security code from the back of my credit card. After that, downloads proceeded as before.
Fred

How do i transfer music from my windows 7 computer to my iphone 4s when it says the device has timed out?

when i connect my iphone 4s to my windows 7 pc, it says the device has timed out so cannot connect. what do i do? i need to transfer music from my pc to my phone but it wont connect. please help, thank you!

Temporarily disable any security software on the computer, then attempt to sync content to the device.
If that resolves the problem, contact whomever supports the security software (not Apple) and inquire how to prevent their software from intereferring with iTunes.

How do I fix this error: The iPad cannot be synced. The device has timed out?

Hello out there! Would someone be so kind as to point me in the right direction in fixing my little promblem? I can't seem to figure out how to get my syncing process to work properly. I've updated all my apps and I have even done the steps to configure. I've chosen to use "my iPad" back up feature and then the next step is to connect to iTunes and sync everything. It will do so and then it will say in the window box of iTunes "Finishing Sync". A minute or so later it will feature an error box presenting the statement: "The iPad, "my iPad" cannont sync. The device has timed out." Where do I go from here? Thanks to any with some good solutions. LJ

Oops! Shall I add that I have recently updated my iPad's iOS software to iOS 5.1.1 and this is when my troubles began. :-)

When i attempt to log on to my college site i keep getting The connection has timed out. Is there a way of changing the time setting , to fix this?

This message "The connection has timed out" only happens when i attempt to log on to my blackboard account for college. All other log in' work fine.

Thanks. So there's no means of knowing whether a text message has been delivered, not to mention time of delivery. Perhaps I've gone for the wrong phone. It might do a lot but seems to miss out on some basics.

I can't download firefox. It keeps saying the session has timed out and that download failed?

when i click download it starts to download the file. But then when it hits 99% i get another box that says that it was unable to download Firefox 3.6 and the session has timed out. What is going on?

Hi Valeria07,
We want managing your media to be easy! It saddens me to hear that this is not occuring. Do you receive a specific error message when the browser times out? Have you tried using a different browser?
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

The operation has timed out

Hello Forum,
I was running a report that was built on report builder at some point an error message of the operation has timed out will come up.
I have set the time out to 0 values and more than 600 seconds too.
On SQL the report ran within 6 minute.
Will be glad for quick response.
Thank you.
Disu Ridwan

Hi Disu,
I assumed that you open the report builder from the report manager or you have connectted to the report server.
As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
Report Builder 2.0 / 3.0 errors out with 'The operation
has timed out' when previewing a report saved in Report Server takes more than 10 minutes
Steps to Resolve SSRS Timeout Issues
"The operation has timed out" when rendering a report
If you problem still exists, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

The request has timed out after 00:00:00 milliseconds.

Hello,
I am having weird exception when I try to send a message to a topic and there's nothing on the internet I could "google with Bing" about it.
Here's the error message
The request has timed out after 00:00:00 milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded.
There are two things weird about it:
The timeout period is 0 miliseconds
The number of miliseconds is given in format 00:00:00
Here's the whole stack
Timestamp: 5.5.2014. 11:15:58
Message: HandlingInstanceID: b9fcc3c8-c167-47ab-8473-ae45bfb62311
An exception of type 'System.TimeoutException' occurred and was caught.
05/05/2014 11:15:58
Type : System.TimeoutException, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Message : The request has timed out after 00:00:00 milliseconds. The successful completion of the request cannot be determined. Additional queries should be made to determine whether or not the operation has succeeded.
Source : Microsoft.ServiceBus
Help link :
Data : System.Collections.ListDictionaryInternal
TargetSite : TAsyncResult End[TAsyncResult](System.IAsyncResult)
HResult : -2146233083
Stack Trace :
Server stack trace:
Exception rethrown at [0]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.TokenProviderHelper.EndGetAccessTokenCore(IAsyncResult result, String& expiresIn)
at Microsoft.ServiceBus.TokenProviderHelper.EndGetAccessTokenByAssertion(IAsyncResult result)
at Microsoft.ServiceBus.SharedSecretTokenProvider.OnEndGetToken(IAsyncResult result, DateTime& cacheUntil)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResult.OnEndTokenProviderCallback(IAsyncResult result, DateTime& cacheUntil)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResultBase`1.OnCompletion(IAsyncResult result)
at Microsoft.ServiceBus.TokenProvider.GetTokenAsyncResultBase`1.<GetAsyncSteps>b__f(T thisPtr, IAsyncResult r)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
Exception rethrown at [1]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.TokenProviderUtility.GetMessagingToken(TokenProvider tokenProvider, Uri baseAddress, String appliesTo, String action, Boolean bypassCache, TimeSpan timeout)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationToken(String appliesTo, String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.GetAuthorizationHeader(String action)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessageInternal(String action, Object body, Boolean includeToken, String parentLinkId, RetryPolicy policy, TrackingContext trackingContext, RequestInfo requestInfo)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageCreator.CreateWcfMessage(String action, Object body, String parentLinkId, RetryPolicy policy, TrackingContext trackingContext, RequestInfo requestInfo)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.SendCommandAsyncResult.CreateWcfMessage()
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpTransactionalAsyncResult`1.<GetAsyncSteps>d__40.MoveNext()
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.EnumerateSteps(CurrentThreadType state)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.Start()
Exception rethrown at [2]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.EndSendCommand(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.<.ctor>b__1(IAsyncResult result, Boolean forceCleanUp)
at Microsoft.ServiceBus.Messaging.BatchManager`1.PerformFlushAsyncResult.OnSingleOperationCompleted(IAsyncResult result)
Exception rethrown at [3]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.BatchManager`1.BatchedObjectsAsyncResult.End(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.BatchManager`1.EndBatchedOperation(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.BatchManagerAsyncResult`1.OnBatchedCallback(IAsyncResult result)
at Microsoft.ServiceBus.Common.AsyncResult.AsyncCompletionWrapperCallback(IAsyncResult result)
Exception rethrown at [4]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.Sbmp.SbmpMessageSender.OnEndSend(IAsyncResult result)
at Microsoft.ServiceBus.Messaging.MessageSender.RetrySenderAsyncResult.<GetAsyncSteps>b__f(RetrySenderAsyncResult thisPtr, IAsyncResult r)
at Microsoft.ServiceBus.Messaging.IteratorAsyncResult`1.StepCallback(IAsyncResult result)
Exception rethrown at [5]:
at Microsoft.ServiceBus.Common.AsyncResult.End[TAsyncResult](IAsyncResult result)
at Microsoft.ServiceBus.Messaging.TopicClient.EndSend(IAsyncResult result)
at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Framework.Azure.Bus.AzureServiceBus.<EnqueueAsync>d__0.MoveNext() in c:\nivatech\papiri\source\framework\Azure\Bus\AzureServiceBus.cs:line 98
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Framework.Analytics.BusinessActivityLogRepository.<EnqueueAddAsync>d__29.MoveNext() in c:\nivatech\papiri\source\framework\Core\Analytics\BusinessActivityLogRepository.cs:line 51
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Papiri.Web.Controllers.BaseController.<RegisterActivityAsync>d__4.MoveNext() in c:\nivatech\papiri\source\web\site\Controllers\BaseController.cs:line 102
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.GetResult()
at Niva.Papiri.Web.Controllers.HomeController.<Index>d__0.MoveNext() in c:\nivatech\papiri\source\web\site\Controllers\HomeController.cs:line 35
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Web.Mvc.Async.TaskAsyncActionDescriptor.EndExecute(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass37.<BeginInvokeAsynchronousActionMethod>b__36(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult`1.CallEndDelegate(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResultBase`1.End()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.AsyncInvocationWithFilters.<InvokeActionMethodFilterAsynchronouslyRecursive>b__3f()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.AsyncInvocationWithFilters.<>c__DisplayClass48.<InvokeActionMethodFilterAsynchronouslyRecursive>b__41()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass33.<BeginInvokeActionMethodWithFilters>b__32(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResult`1.CallEndDelegate(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncResultWrapper.WrappedAsyncResultBase`1.End()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult)
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass21.<>c__DisplayClass2b.<BeginInvokeAction>b__1c()
at System.Web.Mvc.Async.AsyncControllerActionInvoker.<>c__DisplayClass21.<BeginInvokeAction>b__1e(IAsyncResult asyncResult)
Additional Info:
TimeStamp : 5.5.2014. 11:15:58
FullName : Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
AppDomainName : /LM/W3SVC/2/ROOT-1-130437489467023302

We had the same issue and solved it.
We changed the authorization of the servicebus to SAS and all is working fine now.
1. Check Azure Portal select your ServiceBus and go to register configuration
2. You need the Name and Key of existing Rule (here RootManageSharedAccessKey) or insert a new Rule. We created a new rule with no manage access.
3.1 In Code:
Replace the SharedSecretCredentials with SAS Tokenprovider and add it to the endpoint behaviors like before
TransportClientEndpointBehavior sas = new TransportClientEndpointBehavior();
sas.TokenProvider = TokenProvider.CreateSharedAccessSignatureTokenProvider("NAMEofRULE","KEYofRULE");
3.2 App.Config:
Simply change the tokenprovider line from
<behaviors>
      <endpointBehaviors>
        <behavior name="sharedSecretClientCredentials">
          <transportClientEndpointBehavior>
            <tokenProvider><sharedSecret issuerName="ACSNAME" issuerSecret="ACSKEY"/></tokenProvider>...
to
<sharedAccessSignature keyName="NAMEofRule" key="KEYofRULE"/>
Hope it helps!

Error in TeamViewer: "The iView has timed out"

All,
We have put the TeamViewer in the Dynamic Navigation container to display employees on our custom build page which contains only standard iViews.
For some strange reason we get the following error message in the TeamViewer iView and it does not disappear anymore:
The iView has timed out. There is no cached content to display. Click 'Reload' to retrieve updated content. You may need to wait for the cache to retrieve the content from the source. Reload
(But the 'reload' is not a link nor is there a possibility to refresh)
To solve this problem we already tried the following:
- Setting the client side caching to no.
- Putting the time out very high and also on -1.
- Changing the Cache level to none.
Does anybody ever encountered the same problem? Any suggestions on where to look for a solution?
We are using:
EP 6.0
MSS BP 60.1.15
SAP 4.6C
Thanks in advance and kind regards,
Michael Beasley
Message was edited by: Michael J. Beasley

Howzit,
This error message is often interchangeable with a more accurate version (I get both errors from separate workstations):
"Failed to connect to backend system. Check your system definition and user privileges"
There are (at least) two possible reasons for this message:
1. Your System alias is invalid - try connecting a new iView using the same system alias an see if that works. If not, regenerate your system alias or connect directly to the root system.
2. The RFC service has stopped or some reason. A restart of the J2EE should resolve this. Also make sure that you are on the latest patch of the J2EE Engine which should prevent this from happening in the future.
GOOD LUCK!

High number of "The connection has timed out" errors. Where do I set the time out period (variable and file name) - windows 7

I usually use a wireless network at home and have very few time out problems with Firefox.
I am travelling and using Optus Wireless broadband where the average ping to a site is 700+ms .
I suspect that this is the cause of the high number of timeouts I am experiencing.
Optus say there are no problems so I think I will have to set the timeout to a longer period.
Please advise what variable name/s (and in which file) the timeout is set for LOADING PAGES.
Thanks in anticipation.
Greg Atkinson.
By the way the same is happening in IE8
and on many sites other than the Yahoo one below.
================Full Error Page ==============
URL is http://au.mg4.mail.yahoo.com/dc/launch?.gx=1&.rand=81jkv757qfdqt
=========================================
The connection has timed out
The server at au.mg4.mail.yahoo.com is taking too long to respond.
* The site could be temporarily unavailable or too busy. Try again in a few moments.
* If you are unable to load any pages, check your computer's network connection.
* If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Having the same problem 4 out of 5 times I try to navigate to a new site I get the error "connection has timed out".
My I phone works fine on the same wireless connection so it must be something to do with the computer. The problem occurs on IE, firefox, and google chrome.
I too would like to know how to how to either fix this problem or failing that to extend the length of time before the connection times out (which is currently only about 5 seconds).
Please help!
Thanks in advance

Collab CopyProjectMetaData - the operation has timed out

For the life of me, I can't get the CopyProjectMetaData to run w/o timing out. It'll work about 1 in 10 trys if that. I'm using CopyProjectContent on the same two projects successfully everytime. But CopyProjectMetaData is basically useless. Anyone?

Hi Disu,
I assumed that you open the report builder from the report manager or you have connectted to the report server.
As you have mentioned that set the timeout value of the dataset didn't work. Please reference to the similer thread below to set the other time out in the configuration file and so on:
Report Builder 2.0 / 3.0 errors out with 'The operation
has timed out' when previewing a report saved in Report Server takes more than 10 minutes
Steps to Resolve SSRS Timeout Issues
"The operation has timed out" when rendering a report
If you problem still exists, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Question about EWS - The operation has timed out

hi everyone,
I'm developing a solution which uses public folder database in Exchange Server to store tasks:
- We use 1 account to access to public folder database by using EWS.
- Currently, this public folder database contains 60000 tasks and they are being accessed by 700 users, they always have the following exception:
04/23/2015 09:41:15: - The request failed. The operation has timed out
Message :The request failed. The operation has timed out
Source :Microsoft.Exchange.WebServices
Stack Trace : at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems[TItem](IEnumerable`1 parentFolderIds, SearchFilter searchFilter, String queryString, ViewBase view, Grouping groupBy, ServiceErrorHandling errorHandlingMode)
at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems(FolderId parentFolderId, SearchFilter searchFilter, ViewBase view, Grouping groupBy)
Please help.
Thanks a lot.
Phuc

Thanks Glen for your reply.
Here is a code block which retrieve the number of task of some groups
foreach (var bu in request.BusinessUnits)
SearchFilter businessUnitFilter = new SearchFilter.IsEqualTo(BusinessUnitAliasProp, bu);//, ContainmentMode.FullString, ComparisonMode.IgnoreCase);
SearchFilter[] filters = new SearchFilter[] { actualOwnerFilter, statusFilter, businessUnitFilter };
var filterCollection = new SearchFilter.SearchFilterCollection(LogicalOperator.And, filters);
GroupedFindItemsResults<Item> taskResults = this.exchangeService.FindItems(_publicFolderId, filterCollection, itemView, groupByApplication);
if (taskResults != null && taskResults.ItemGroups != null)
foreach (var groupItem in taskResults.ItemGroups)
if (!dict.ContainsKey(groupItem.GroupIndex))
dict.Add(groupItem.GroupIndex, new Dictionary<string, int>());
if (!dict[groupItem.GroupIndex].ContainsKey(bu))
dict[groupItem.GroupIndex].Add(bu, groupItem.Items.Count);
Please let me know if it's too complex and might affect to the performance of Exchange Server

The search has timed out.

Similar Messages

Maybe you are looking for