The Search is taking much time sometime and most of the time working fine

Hi Expert,
i have a Offer 41000630set to "final contract" by the F&C and saved, the F&C clicked on "more" and "Update Quantity Contract".
We saw the "doughnut"more than minutes before we were presented with the EMPTY list of possible QCs for about 9 minutes. After that we aborted the operation with a click on the "x" of the empty list window. After that the "doughnut" was presented again and after another minute we decieded to close the browser.
We logged in again and repeated the process and it worked much faster and now we were preseted with the list of all QCs.
Our question: what went wrong the first time?
We also experienced simular situations in other countries for different function. This behaviour is very sporadic so it is very difficult to replicate on the Q-System.
I wanted to know the possible cause of these behavious as i can't simulate this issue its rare.
Prem.

Hi Miecel,
Thanks for your guidance,
I investigated and find out the performance issue came as the secondry index were not transported for some of the standard tables in the system that is why the search was takingmuch time.
that's for your guidance which help much to find out the cause of the issue.
points alloted.
Thanks,
Prem.

Similar Messages

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Hi, you can't have a PowerMac, they can't run 10.6, 10.7, or ML/10.8!
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

I am getting an unable to connect error messagen when I start the browser. The setting is set to "no proxy" and my internet connection is working fine. What can I do to fix this?

I opened up my firefox browser yesterday and it crashed. Since then I get an error message that says "unable to connect" every time I try to load the browser. The setting is set to "no proxy" So it should be connecting. My internet explorer browser is working fine. So I know it is not my internet connection. What can I do to make the firefox browser work again?

Hi,
Maybe the radio connection on the other end is not working. Hope this helps.
xxmitchxx90

TS4425 I tried this on my iPad. The but did not get any terms and conditions. Photo stream works fine on the iPad but not on Apple TV. What do I do?

Followed the instructions but they don't work. On the iPad I got no new T&Cs and it works fine. So I have no means to agree the new T&Cs and because of that it does not work on Apple TV.

Personally I think the iOS devices are poor at reconnecting - Airplay establishes that a link is available but when the iPhone/iPad has been away from the house and rejoins the network i think AppleTV already thinks it's connected with a different IP address and fails to recognise it has joined the network again with new credentials.
Something along those lines anyway.
I find that a combination of restarting AppleTV, router and iOS device tends to fix it, but not for everyone.
AC

I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

Did you check your security software (firewall)?
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
See:
* [[Server not found]]
* [[Firewalls]]

How do I remove the search bar that continues to reappear no matter how many times I manually remove it?

For a short while now the search bar has been appearing on my Firefox browser. I don't want it there and removing it using the 'custom' settings when I click in a blank area in my browser does not work, it keeps coming back along with the 'bookmarks' button.
No, there is nothing in my Add/Remove programs that resembles the search bar in any way, shape or form. I've already checked again and again, it's simply not there and not an option.
Yes, I've checked if perhaps it were one of the plugins I use and that is not the case. I've removed all the plugins to check and it still appears.
I don't want this bar there, it's annoying and I want it gone. No there are no options to remove it in its options. I don't care about how useful other people say it is, I find it annoying. Every time I open Firefox it's there...I want it gone.
Refer to screenshot: http://i162.photobucket.com/albums/t254/MasakoTomoe/untitled-2.jpg
So, how do I get rid of it?

Seems that may have worked and that's great, thank you. But now I have another problem which seems to be as persistent as the search bar has been.
Now when I edit the bar and position of the buttons some of those buttons disappear when I click Ok in the customization, but reappear when I reopen the customization settings.
Why is that? When I put a space in between some of the buttons the buttons near the space will disappear and leave a blank space where it should be.
I'm beginning to be rather annoyed with this Firefox Beta to say the least and am considering returning to the version before it. Whatever I do now as far as customizing is concerned of the toolbar is reset every time I reopen Firefox. The buttons are no longer where I had set them up, the address bar is stretched to it's maximum, the Menu Bar is back the far left edge, buttons are missing that I had put there, and buttons I had removed are returned.
:| I know it may seem insignificant to some people but it annoys the crap out of me. I understand this is a beta and if there is no solution then I perhaps will use the earlier version for a while.
Thanks for your input by they way, it's much appreciated.

Mac OS X Mountain lion bug sometimes the programs don't like to lunch and I unplug the power cord what shall i do

Mac OS X Mountain lion bug sometimes the programs don't like to lunch and I unplug the power cord what shall i do

Here are some suggestions for getting the best results from this site.
If you're not comfortable with English, it may be best to post in your native language. Others can use automatic translation, if necessary, to help them understand you. They may reply in their native language, and then you can do the same to understand them.
Google Translate
Screenshots can help overcome a language barrier. To upload an image, click the camera icon in the message editor on this page.
Give details of the problem. A statement such as "it doesn't work" conveys no information. If it did work, you wouldn't be here. Instead, you should post something like this: "I did A; I was expecting B; but I got C instead." Include the complete text of any error messages you saw and where you saw them: in an application window, a CrashReporter window, a log, or whatever. Also include the steps you’ve taken yourself, if any, to try to resolve the issue. If the problem is of recent origin, did you make any changes to your setup just before you first noticed it? Is the problem reproducible or intermittent? That is, does it always manifest itself when you take a certain action, or only at unpredictable times?
Before posting, ask yourself whether it’s likely that you are the the only person ever to have had this problem. If not, search the discussions for answered questions similar to yours. If you found any pertinent information, but it didn't help, include details.

When typing or clicking to open pages firefox does not show the text or that it has changed to the other page. Unless i minimize and then maximise the window. Any help with this would be much appreciated.

The browser seems to be lagging and stuck on the original page until moved around the screen or minimised or maximised.
Again any help at all is much appreciated. I really dont like using other browsers.
I have the latest edition of directx, graphics card and sound drivers are all up to date according to the laptop manufactor's website.
Reinstalled and uninstalled around 3 times. Thought it could be a registery problem so before i installed it the final time i ran c cleaner.
Ran adaware and superanti spyware to see if spyware was a problem
If any more information is needed please ask.
Thank you.
Nanakisbs

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
In Firefox 4 and later [http://kb.mozillazine.org/Safe_mode Safe mode] disables extensions and disables hardware acceleration.
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.

Can I use Time Capsule and LaCie at the same time?

Can I use Time Capsule and LaCie at the same time?

stephaniefromarlington wrote:
Before I answer your questions, let me first just say thank you so much for your amazing patience and helpfulness. Whether or not we get to the bottom of this, I am very, very grateful to you.
We will get to the bottom of it, and you're quite welcome. Don't feel you ought to know all this stuff -- none of us were born with it!
By the way, in answer to your original question, yes, you can use the Time Capsule while backups are running. There's no conflict at all.
1) Estimated size of full backup: 205.94 GB
2) My LaCie has available: 11.04 GB of 359.95 GB
That's part of the problem right there; 360 GB is a bit small to back up 206 GB. Ordinarily, a Time Machine drive should be 2-3 times the size of the data it's backing-up, so Time Machine can keep a reasonable "depth" of old backups for you.
It looks like Time Machine is trying to do a fairly large backup, and there just isn't enough room for it.
But something doesn't quite add up. Time Machine should have deleted all but your most recent backup, trying to make room for the new one. But that would mean there should only be a bit less than 206 GB on the disk, not 360.
A clue may be lurking in your logs. Use the widget in #1 of Time Machine - Troubleshooting to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.

I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?

I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?

You should be able to change the permissions on the files.. this is yet another bungle by Mavericks I suspect.
http://support.apple.com/kb/PH13799
Sometimes it is because you Migrated wrongly.
http://pondini.org/TM/E10.html
It is not up to Mavericks because sadly the guy who wrote all this great info died recently.

When I go to delete messages on iPad 2, I hit edit but get archive sometimes and delete at other times. How can I get just delete.

When viewing mail am having trouble deleting old mail. I hit edit bit get archive sometimes and delete at other times. Is there a way to just delete?

You need to be more accurate in the questions you're asking. I can't see your machine nor read your mind, so you have to allow for my limitations.
Can I get rid of the "extra" versions?
What extra versions? Are you sure these psd files are actually there?
Do I need it on the computer in all of those versions?
Need what?
If not, how do I go about downsizing that outside of deleting the actual photo?
Downsizing what?
but is there a way to downsize the actual file or are all of those formats standard to the image?
What formats? What image?
Here's something I can help with:
We plan on moving older photos to an external hard drive
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
Now you have two full versions of the Library.
3. On the Internal library, trash the Events you don't want there
Now you have a full copy of the Library on the External and a smaller subset on the Internal
Some Notes:
As a general rule: when deleting photos do them in batches of about 100 at a time. iPhoto can baulk at trashing large numbers at one go.
You can choose which Library to open: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
You can keep the Library on the external updated with new imports using iPhoto Library Manager

Safari 5.1 not loading MOST of the times. like 1 in 100 attempts it works fine, and that too, as long as you work in same window. and what's the webkit2webprocess.exe file?

safari 5.1 not loading MOST of the times. like 1 in 100 attempts it works fine, and that too, as long as you work in same window. and what's the webkit2webprocess.exe file?

the webkit2webprocess.exe has something to do with the sound. Safari works fine for me, except for the occasional time when the webkit2webprocess.exe crashes. Sometimes it crashes Safari altogether but sometimes it just reloads all the tabs I have opened. Either way, it's a huge pain. I hope they fix it with an update soon.

I can't connect to the drive on my airport time machine and am receiving the message: "AirPort Time Capsule" can't be opened because the original item can't be found.

Time capsule has been working perfectly for months.
Suddenly I can't connect to the drive on my airport time capsule and am receiving the message: “AirPort Time Capsule” can’t be opened because the original item can’t be found.
Time machine appears to be still backing up (last backup within the last hour), but drive is not visible and I have files stored on it.
I have tried rebooting everything in order as suggested for other issues, anyone got any ideas how to see the drive again??

What OS are you running??
It is very typical Yosemite issue.
1. In airport utility does the TC show up.. if so click it.. and see the summary page which will include its IP address. That is what you are after.
From my screenshot you can see the TC address is 192.168.2.57
It might well show up briefly after a reboot or in ipad / iphone version utility. Yosemite is hopeless. The airport utility hardly works.
2. In Finder use Go, Connect to server.
Type in SMB://192.168.2.57 (replace with IP you discover).
If it is possible it will request a password.. type that in and DO NOT FORGET.. to store it in your keychain.
This will work until the TC changes IP which won't happen if it is main router.. but will happen if it is bridged.. so you need to tell me the whole network setup.
Mavericks is nearly as bad and the above instructions should be universal except I would use AFP instead of SMB. Apparently Yosemite is now totally Windows oriented.

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PL

I have purchased the Acrobat pro subscription for 1 year and have followed the steps to install it. But when i go to start it, It crashes and it does this every time! I have restarted my mac pro and also restarted in safe mode but it just doesn't work! PLEASE HELP!!

Hi jim1287,po
Check for the latest updates. Installing latest updates should resolve this problem.
Also, try to ran disk repair using safe mode in Mac, for instructions please visit: http://support.apple.com/kb/PH14204
Try enabling root user profile on mac and try to check. OS X Mavericks: Enable and disable the root user
Regards,
Ajlan Huda.

The Search is taking much time sometime and most of the time working fine

Similar Messages

Maybe you are looking for