The selected combination of bit rate and sample rate is not allowed.

I've always burned my purchased CDs into iTunes using a AAC 320 kbps and 48.000kHz. Now when I select that option in iTunes 9 I'm getting a "The selected combination of bit rate and sample rate is not allowed." pop up screen. So is it impossible to burn my albums in a 320kbps/48.000 AAC format?. I had no problems in previous versions of iTunes using this setting. I guess I might have to switch over using a MP3 import setting instead.

Audio CDs are encoded with a sample rate of 44.1 kHz. Ripping them at 48 kHz requires resampling and does not improve the quality. Unless you have a special need for 48, use 44.1.

Similar Messages

TS1717 when trying to import cd the following message appears "the current encoder settings for bit rate and sample rate are not valid for this file"?

Trying to import cd when this message appears "the current encoder settings for bit rate and sample rate are not valid for this file". Any suggestions?

Thanks so very much. I chose MP3 and Download and it is working beautifully. Have a wonderful day and it is so nice of you to get right back to me. I'm trying to cut a DVD for my grandson's grad party and I got most of the photos and didn't have any music since I lost everything in a clean install. Could hug you!

"current encoder settings for bit rate and sample rate are invalid" message

I have some files I am working with. Details and what happened:
Had some music files where I was doing some trimming/splitting. Files worked fine in itunes.
Open the files in Quicktime Pro 7 to trim them. Exported to aif.
Opened the files with itunes. They open and play just fine.
In Itunes I click"create AAC version" to convert them.
I receive the message "An error occurred while trying to import the file. The current encoder settings for bit rate and sample rate are not valid for this file."
I don't know what to do from here. Suggestions?
Thanks.

Make sure that the AIFFs that you export are set for 16 bit PCM.
Also, assuming that you are using 44.1 kHZ sampling in your AIFFs, make sure that you are not trying to use 48 kHz in the AAC.

In Finder how do I get iTunes to show bit rate and sample rate of an entry?

In Finder how do I get iTunes to show bit rate and sample rate of an entry so I can set my DAC?

TonyEyes wrote:
In Finder how do I get iTunes to show bit rate and sample rate of an entry so I can set my DAC?
Tony, Make sure you are in Songs view. Then View > Show View Options, and check the boxes for "Bit Rate" and "Sample Rate." See picture:

Difference between scan rate and sampling rate? what is meant by throughput/maxt

want to know the difference and meaning of sample rate and scan rate ? what is meant by throughput and maximun throughput

Hello;
There is a really good KnowledgeBase at NI web site that talks about these definitions and differences.
The KnowledgeBase ID number is 2D6CTML8.
Hope this helps.
Filipe

Internal handling of Bit Depth and Sample Rate

I am wondering if iTunes allows accurate import of 48KHz/24bit files or whether it will convert to 44.1KHz/16bit as default. There is contradictory information in the Internet.
Thanks.

I just experimented on my machine, which is running iTunes 8.1. 48/24 WAV files can be added to iTunes. When adding to the library, it does not change them.
However, if you use iTunes as a conversion tool, it cannot create 48/24 files. The highest it can go is 48/16. That may be the source of the seemingly contradictory information that you read.
I did not try syncing the iPod. However, based on past problems with 48/16 files, I would not be surprised if the iPod has a problem with 48/24 files.

Conflict between the saved data and the sampling rate and samples to read using PXI 6070e

Hello, I am using PXI 6070e to read an analog voltage. I was sampling at 6.6 MHz and the samples to read were 10. So, that means it should sample 10 points every 1.5 um. The x-axis of the graph on the control panel was showing ns and us scale, which I think because of the fast sampling and acquiring data. I use "write to measurement file" block to save the data. However, the data was saved every 0.4 second and as 35 points data at the beginning of each cycle (e.g. 35 points at 0.4 sec and 35 at 0.8 sec, and so on) and there was no data in between. Can anyone help me how there are 35 reading points every cycle? I could not find the relation between the sampling rate and samples to read, to 35 points every 0.4 second!
Another thing, do I need to add a filter after acquiring the data (after the DAQ assistant block)? Is there anti-aliasing filter is built in PXI 6070e?
Thanks for the help in advance,
Alaeddin

I'm not seeing anything that points to this issue. Your DAQ is set to continuous acquire. I'm not sure if this is really what you want because your DAQ buffer will keep overwriting. You probably just want to set to Read N Samples.
I'm not a fan of using the express VIs. And since you are writing to a TDMS file, I would use the Stream to TDMS option in DAQmx. If you use the LabVIEW Example Finder, search for "TDMS Log" for a list of some good examples.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Burn voice mp3 play list to audio CD. convert bit rate or sample rate.

I have several audio files (voice), 30 in all, that I wish to play in a car CD player.
The car player cannot play mp3. Using iTunes I tried buring a play list of mp3 files to an Audio CD.
I get an alert from iTunes that I may require multiple CD's. Each mp3 file is around 90megs in size or about an hours worth of audio (voice).
The audio files are voice no music. But they are at 192 kbps bit rate and 44 khz sample rate.
Is there a way of converting them to squeeze more files onto a CD? Changing bit rate or sample rate?
Can itunes do that? Or is there a utility that can do that?
thanks

Now that memory serves me right. CDs have the MB size and the Minute size on them. example 700MB/80Minutes.
How we forget...
Thanks though

Supported bit depth and sampling frequency

Hi,
Is it possible to determine at runtime what sampling frequencies and bit depths are available for audio capture -- other than by trial and error? It does not seem that way from the API, but maybe I missed something, so I decided to post a question here. The only thing I was able to find so far is that 8-bit PCM WAV is required to be supported by all devices that support audio at all.
Thanks in advance for any info!
Sergei

Thanks for the info. I guess I was looking for something more specific - the exact bitrates and sample rates that Creative claims to support. Would you know where official and comprehensi've data can be had? There must be a tech spec somewhere.
It is common these days in business to see a recording of, say, a conference call or seminar presentation at 32k bitrate/025Hz, or even 24k bitrate/8000Hz, posted to a company's website for download by those who could not be there, and MP3 players are increasingly used for their replay. Companies use low digitization rates because there is no need for hifi and the files are much smaller: less storage, faster download.
I'd be surprized to think that Creative don't have compatibility with the standard range of rates offered by ubiquitous programs like Audacity and dBpower, the latter being one they themselves recommend!

I switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it

i switched on the voice over at its minimum rate and now i am not able to slide the screen and unlock it, i switched on the voice over in ipad 2 ios 6 at its minimum rate and now i am not able to slide the screen and unlock it please advise

You should be able to turn it off on the iPad by using 'a tap-to-select and then double-tap to activate/type process' and 3 fingered scrolling to go into Settings > General > Accessibility and turn it 'off' (so to use the 'slide to unlock' tap the slider and then double-tap it, and to type your passcode tap a digit and then double-tap it etc), or you can do it by connecting to your computer's iTunes : http://support.apple.com/kb/HT4064

Rate and accessable value is not displaying for the tax invoice output

Hello All,
Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
Thanks & Regards,
ramesh

hi Gurpreet,
You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
Or providing value to it in the SQL...

How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform

How to Extract the Freq List, Cycles per Freq and Samples per Cycles of sweep waveform
I want to extract the freqency distribution, cycles per freqency, and samples per cylce of swept waveform, in order to output the same of swept waveform with I have acquired by NI DAQ card, tks!
owen wan
Attachments:
Untitled 1.vi ‏2333 KB

Look inside the palette called Signal Processing - Waveform measurements. There are a lot of functions here that you can use to get the information you desire. For instance, the Extract Tones function will output an array of clusters, with each cluster element giving the frequency, amplitude, and phase of the signal component. Go through the entire arry to see each frequency component of the complex waveform.
Also, in the Waveforms palette there is the Get Waveform Components function that will give you t0, dt, and Y components of the waveform. 1/dt should give you the sample rate. See attached VI.
- tbob
Inventor of the WORM Global
Attachments:
WfmInfo.vi ‏4658 KB

Having trouble with wav files and sample rates

Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy

You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.

"Sometimes the internet gets a bit sleepy and takes a nap..."

I am using the latest version of skype, and have adequete internent connectivity, however I keep getting the following message when I try to log in to skype via my Facebook log in: "Sometimes the internet gets a bit sleepy and takes a nap. Make sure its up and running then we'll give it another go."I had no issues signing in to skype yesterday--this just started today. I use Win7 Home Premium OS.Any advice?

Yep, just found out the solution--thank you to the skype support chat folks. They told me to download the older version at this link: http://www.skype.com/go/getskype-sseit worked like a charm.Hope this helps!

OSX 10.6 .8 -- Firefox automatically starts when I boot up (MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options. Don't know where else to look.

How do I keep Firefox automatically starts when I boot up (OSX 10.6 .8 -- MacBook Pro Intel). It is not in the Startup Items in System Preferences, and automatic startup is not checked in Firefox Options.

Hi fullrun-
Once Firefox is open, you should be able to open the Right click context menu on the icon. From there you select 'Options' and then de-select 'Open at Login'. Hope that helps.

The selected combination of bit rate and sample rate is not allowed.

Similar Messages

Maybe you are looking for