"The selected communication device does not exist"
Whenever I log on (or come out of sleeping), I get a prompt box from Internet Connnect that says "The selected communication device does not exist. Please verify your setting and try again". I think this started to happen when I stopped using a USB modem to access the internet. Recently I was again using a (different) USB modem, and when I stopped (I now have a wireless router), I now get TWO of the above alerts!
To be clear - I have no problem accessing and using the internet with the wirelss router I am using.
Is there a way of deleting historical communication devices I no longer use from Internet Connect that might stop this from happening?
Thanks in advance.
G4 iBook Mac OS X (10.4.8)
Hello Dunstan,
I wonder if this might have something to do with Location and Network settings.
I'd go to System Preferences/Network and, choosing the location that you are using, select the "modem" tab. On the presumption that, because you are now using wireless router and that your computer is no longer using its built-in modem, I'd delete all settings under "modem".
Then I'd open Internet Connect and see what crops up when you click on the Modem tab. It should be blank. If it is not, I'd close Intertet Connect, then go to My User Folder/Library/Preferences, and there move the following file to the Desktop: com.apple.internetconnect.plist. Open Internet Connect again.
There are other things that can be done, especially in the Locations settings. However, I'd try the above first.
Best of luck,
Martin
If you found that this contribution helped to answer your question, please consider the "Helpful" and "Solved" buttons in this message. Why reward points?
Powerbook 15-inch G4 1GHz Mac OS X (10.4.8) Several veterans that go on and on. 40gig, 3rd generation iPod
Similar Messages
-
DNS: The selected log file does not exist
Hi to all,
I am using Lion Server on a Mac Mini and everything seems to work fine. However, when I want to check my DNS log file (Server Admin > DNS > Log) I get a message that "The selected log file does not exist"! Stopping and starting the DNS service doesn't help. Anyone any idee how to view the log file within the Server Admin app?
Thanks in advance!
Ewald.hi John!
if you have time, patience, and squared balls (just for laugh! ):
Use "strace" to trace all system calls a binary make... System calls like "open" file and "close" file =)
That's say, we are going to "trace the files opened by specific application".
"Strace" in MacOSX comes with Developer Tools, so you'll need to install these to continue.
First you have to know which are the Applications in the game, because "Server Admin" is a client-server application, there will be a client application in the client machine, and a server application running in the server.
You have to trace the server application running in the server. It will be the one which opens the log file, and sends the data to the client application.
I've made some previous investigation about the Server Admin Log parser (see https://discussions.apple.com/thread/3352647?start=0&tstart=0).
Also will be helpfull to read a little bit about strace ( http://linux.die.net/man/1/strace )
Here i do my bet, maybe that command line is what you look for:
#sudo strace launchctl load -w /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist | grep "open"
sudo: do as super user
strace: trace the binary
launchctl: system service
load -w file: load, as defined in this file
| grep open: and substract just the "open file" traces
Let me know if that gives you more clues!
regards, T -
The build directory of the test run either does not exist or access permission is required.
i am trying to run automated tests
i follow the steps in the web but when i have 2 issues that does not solve
1. i created console project and add build definition without drop folder and queue builds that success.
2. i created C# unit test and add build definition and run it from VS and it worked and done what i want to do.
3. i built lab with 1 machine and define the controller on this pc ( the machine in the lab is another pc)
4. i created test suite with test cases and from vs 2013 i associated automation nethod that i created in 2.
5. when i try to associate the builds for the test plan i have a PROBLEM(1):
this happened every new build that i try to assign - all the builds appears after refresh and when i press assign to plan button
a pop up shown with error : " The build that you selected for this plan no longer exist " but he chose it in build in use but there no work item under it - the list is empty even that there are 2 tests under this test suite.
and than when i try to run the automated tests i have this PROBLEM(2):
The build directory of the test run either does not exist or access permission is required. and the test failed.
Please Help
RoeyHi Rory,
Thank you for posting in MSDN forum.
According to the error message:
(1) a pop up shown with error : " The build that you selected for this plan no longer exist "
I tried to create a build definition without the drop folder location for unit test solution from the VS IDE, and then I try to select the Build in use option to add the Available builds, then click this Assign to plan. I found that I get same error message
with yours like the following screen shot.
However, when we try to create a build definition with drop folder location for this same unit test solution and then build successfully in the VS IDE.
After you add the Available builds and then click this Assign to plan in the MTM, it work fine.
Therefore, I assume that the issue is related to that you did not specify a build directory for automated test case. MTM need to know where is the drop location of the build building your tests.
http://stackoverflow.com/questions/20033217/couldnt-run-my-test-using-microsoft-test-manager
In addition, I did some research about the problem 2:"The build directory of the test run either does not exist or access permission is required. and the test failed."
I know that the error message occur in either of the following conditions:
1. The account under which test controller is running does not have read permission on the build directory. (The build directory is same as the drop location of build associated with this test run.)
2. The build directory itself does not exist.
So please refer the following blog to check this issue:
http://blogs.msdn.com/b/aseemb/archive/2009/11/25/error-starting-the-test-run-build-directory-of-the-test-run-is-not-specified-or-does-not-exist.aspx
Therefore, I suggest you can try to specify a drop location for build when you run the automated test from the MTM and then check this issue.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
The selected Flex SDK does not support building mobile projects
I am unable to create a new Actionscript Mobile project. The new project dialogue gives the error: "The selected Flex SDK does not support building mobile projects." I tried seting the default Flec SDK both to the SDK included with Flash Builder 4.7, and also to a version of the 4.6.0 SDK (build 23201) with AIR 3.3 SDK overlayed on it, which already existed on my computer. Both resulted in the same error. Any ideas?
Hi ,
Actionscript Mobile projects use AIR SDK by default in Flash Builder 4.7 . Flex SDK won't be used for Actionscript projects.
Could you please try creating an Actionscript project in fresh workspace and let me know if the issue still exists.
Also attach screenshot and error log if any.
Thanks,
Sanjay -
Error TF10175 The FMS team project does not exist
We are using TFS and Visual Studio 2013. TFS was working fine for me. However we have to do some Java development and also wanted that code in source control in the project. I was the lucky one (or not) volunteered to head this up. I installed
Eclipse and the TFS plugin for Eclipse now I am unable to use Visual Studio 2013 and the Source Control explorer to open other .Net based pieces to the solution without getting the following error:
Error
TF10175: The FMS team project does not exist.
This only happens for me and since I installed the Eclipse TFS Plugin. I also get the error when I try to get the latest code. Is there an issue in using the TFS plugin for Eclipse and Visual Studios?
R. K. WaltersHi Walters,
Thanks for your post.
As you’re using TFS Eclipse, I moved this post to TFS Eclipse and Cross Platform forum for the better response.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Why the x$bh view does not exist?
Why the x$bh view does not exist?
SQL> select*from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
PL/SQL Release 11.1.0.6.0 - Production
CORE 11.1.0.6.0 Production
TNS for 32-bit Windows: Version 11.1.0.6.0 - Production
NLSRTL Version 11.1.0.6.0 - Production
SQL> conn system/oracle
Connected.
SQL> desc X$BH;
ERROR:
ORA-04043: object X$BH does not existSQL> desc x$bh
Name Null? Type
ADDR RAW(4)
INDX NUMBER
INST_ID NUMBER
HLADDR RAW(4)
BLSIZ NUMBER
NXT_HASH RAW(4)
PRV_HASH RAW(4)
NXT_REPL RAW(4)
PRV_REPL RAW(4)
FLAG NUMBER
RFLAG NUMBER
SFLAG NUMBER
LRU_FLAG NUMBER
TS# NUMBER
FILE# NUMBER
DBARFIL NUMBER
DBABLK NUMBER
CLASS NUMBER
STATE NUMBER
MODE_HELD NUMBER
CHANGES NUMBER
CSTATE NUMBER
LE_ADDR RAW(4)
DIRTY_QUEUE NUMBER
SET_DS RAW(4)
OBJ NUMBER
BA RAW(4)
CR_SCN_BAS NUMBER
CR_SCN_WRP NUMBER
CR_XID_USN NUMBER
CR_XID_SLT NUMBER
CR_XID_SQN NUMBER
CR_UBA_FIL NUMBER
CR_UBA_BLK NUMBER
CR_UBA_SEQ NUMBER
CR_UBA_REC NUMBER
CR_SFL NUMBER
CR_CLS_BAS NUMBER
CR_CLS_WRP NUMBER
LRBA_SEQ NUMBER
LRBA_BNO NUMBER
HSCN_BAS NUMBER
HSCN_WRP NUMBER
HSUB_SCN NUMBER
US_NXT RAW(4)
US_PRV RAW(4)
WA_NXT RAW(4)
WA_PRV RAW(4)
TCH NUMBER
TIM NUMBERwrong USER -
MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist
Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David -
UD - Selected set code does not exist
Dear All,
We have create material in 0001 plant. It is consumable material and QA is not required. But by mistake Inspection flag was activited in material master.
Now material received is in QA Stock. We have created inspection plan and not inspection lot is in REL status.
During UD system shows following message :
"Selected set code does not exist, or data entered is incomplete"
Is there any way to take stock in unrestricted without doing any QA activity ?
Thanks and Regards,
NiravHi,
Why don't you simply complete the Stock posting using 'Inspection lot stock' tab in QA32?
If you only need to take the stock out of QI and doesn't need Usage decision then why do bother about it.
Besides, this error comes when the UD selected set defined in Configuration is not maintained for the Plant.
To check this, Follow this path,
QCC0> Quality inspection> Maintain inspection type. Select the Relative inspection type and see what is maintained.
Once you maintain this Selected set for the plant 0001 using QS51, you won't get this error. Other way, define that selected set in the configuration which is already maintained for the plant.
ntn -
Getting error 462 - The remote server machine does not exist or is unavailable
I have several modules that read and write data to and from Excel 2010 worksheets. I am noticing that the Excel process does not end aven though Excel is not running on my PC. It is like an orphan process. If I try running the Access module again I get the
message "error 462 - The remote server machine does not exist or is unavailable". Here is the code I am running. When I click the Debug button on the message box the line "rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row"
is highlighted.
Option Compare Database
Option Explicit
Function ImportImportanceScores()
Dim RecSet As DAO.Recordset
Dim objXLAppln As Excel.Application
Set objXLAppln = New Excel.Application
Dim objWBook As Excel.Workbook
Dim rowNum As Variant
Dim i As Integer
Dim j As Integer
Dim StrPathFile As String, strFile As String, strPath As String
Dim strBrowseMsg As String, strInitialDirectory As String, strFilter As String
'show dialogue box
strBrowseMsg = "Select the EXCEL file:"
'set directory to load files from
strInitialDirectory = "C:\Bridge_CIP_Part-A_B\"
'run strFilter function
strFilter = ahtAddFilterItem(strFilter, "Excel Files (*.xlsx)", "*.xlsx")
StrPathFile = ahtCommonFileOpenSave(InitialDir:=strInitialDirectory, _
Filter:=strFilter, OpenFile:=True, _
DialogTitle:=strBrowseMsg, _
Flags:=ahtOFN_HIDEREADONLY)
If StrPathFile = "" Then
MsgBox "No file was selected.", vbOK, "No Selection"
Exit Function
End If
'Set Excel application object. Critical for macro to run properly. Do not change.
'Open workbook and worksheet to load data.
With objXLAppln
Set objWBook = objXLAppln.Workbooks.Open(StrPathFile)
objXLAppln.Visible = True
End With
Set RecSet = CurrentDb.OpenRecordset("Importance_Scores")
'Copy data from Excel cells to Access fields
objXLAppln.Sheets("Importance_Scores").Select
rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row
objXLAppln.Range("A6").Select
'Add records to table from Excel
With RecSet
For i = 0 To rowNum - 6
RecSet.AddNew
RecSet.Fields("CIP_ID").value = objXLAppln.ActiveCell.Offset(i, 0).value
RecSet.Fields("Target_Timeframe_for_Construction").value = objXLAppln.ActiveCell.Offset(i, 2).value
RecSet.Fields("ImportanceFactor_TI-1").value = objXLAppln.ActiveCell.Offset(i, 21).value
RecSet.Fields("ImportanceFactor_TI-2").value = objXLAppln.ActiveCell.Offset(i, 22).value
RecSet.Fields("ImportanceFactor_TI-3").value = objXLAppln.ActiveCell.Offset(i, 23).value
RecSet.Fields("ImportanceFactor_TI-4").value = objXLAppln.ActiveCell.Offset(i, 24).value
RecSet.Fields("ProjectRank").value = objXLAppln.ActiveCell.Offset(i, 33).value
RecSet.Update
Next i
End With
'Close everything
RecSet.Close
objWBook.Close SaveChanges:=False
objXLAppln.Quit
Set RecSet = Nothing
Set objWBook = Nothing
Set objXLAppln = Nothing
End FunctionIn the line
rowNum = objXLAppln.Range("A" & Rows.Count).End(xlUp).Row
Rows does not refer to objXLAppln or to objWBook. Change it to
rowNum = objXLAppln.Range("A" & objWBook.Sheets("Importance_Scores").Rows.Count).End(xlUp).Row
Regards, Hans Vogelaar (http://www.eileenslounge.com) -
I have found that received mail is not returned to the sender if the receiving
local account does not exist. This problem occurs even if I use Console to
enable the Return message to sender option under the error handling methods.
In addition, I have used the configutil
to confirm that I have set the value
for Unknown account action to "13," which corresponds to the settings "Return
message to sender," "Notify the postmaster via email," and "Log the error in
the log file." Yet, in this situation, an error message is being sent to
postmaster, but not to the sender, and the error is not being recorded in the
log file.
<P>
Do the following steps:<BR>
<P>
<OL>
<LI>From Console, open the appropriate Messaging Server.
<LI>Click the Configuration tab.
<LI>Open the Services folder.
<LI>Select SMTP.
<LI>Click the System tab.
</OL>
<P>
Check the "Domain handled by this server exclusively" field to make sure that
your mail domain is listed. If your mail domain is not listed, then Messaging
Server will assume that there is another mail server that is handling the
domain listed and will forward requests to this server.
<P>
For more information, please see the document <I>Messaging Server
Administrator's Guide</I>, Chapter 3, Configuring SMTP Services at <BR>
http://docs.iplanet.com/docs/manuals/messaging/nms41/ag/smtp.htm#1010371On Thu, 12 Dec 2013 16:16:02 +0000, lpphiggp wrote:
> I'm seeing this XTCOM error occur all over our /var/log/messages for one
> server, running SLES11sp2 / OES11/sp1;
>
> I don't really know what this is even for. We don't use NetStorage or
> iPrint even, this server only does basic NCP file serving, DHCP, and
> hosts a GroupWise PO.
> Is this anything to be concerned about?
If this:
http://www.linuxquestions.org/questi...entication-vs-
edirectory-825043/
is to be believed, it seems to indicate that your NAM configuration on
this server is not valid. I'm not seeing this message here on the OES
servers I looked at, and NAM is working correctly here.
David Gersic dgersic_@_niu.edu
Knowledge Partner http://forums.netiq.com
Please post questions in the forums. No support provided via email.
If you find this post helpful, please click on the star below. -
The company code TEST does not exist or has not been fully maintained
Dear Experts,
I received the following message when I tried to create a material master from Plant Maintenance module (select view based on general plant data / storage 1).
"The company code TEST does not exist or has not been fully maintained
Message no. M3150
Diagnosis
You have entered either the company code TEST or a plant assigned to this company code. However, the company code either does not exist or has not yet been configured for materials management.
Procedure
Ask your system administrator to configure the company code.
Procedure for System Administration
Carry out the following activities as required:
Create the company code if it does not already exist.
You do this in Customizing for Enterprise Structure in the activity Define, copy, delete, check company code.
Make sure that a fiscal year variant is assigned to the company code.
You do this in Customizing for Financial Accounting (Global Settings) in the activity Enter global parameters.
Configure the company code for materials management.
You do this in Customizing for the Material Master in the activity Maintain company codes for materials management.
However, I've done all the above instructions, yet the message still appear. what else should I check?
regards,
AbrahamHi,
I've done that earlier..
However, I've chosen the default plant 0001 instead of my own created plant, it works. Then I tried to do it again, with my own plant, it works also..
Anyway, thanks a lot.
regards,
Abraham -
RDS Gateway + Smart Card Error [ The specified user name does not exist.]
I have the following Windows Server 2008 R2 servers:
addsdc.contoso.com, AD DS Domain Controller for contoso.com
adcsca.contoso.com, AD CS Enterprise CA, CDPs/AIAs published externally.
fileserver.contoso.com, RDS Session Host for Administration enabled
rdsgateway.contoso.com, RDS Gateway enabled
tmgserver.contoso.com, 'Publishing' rdsgateway.contoso.com but with pass-through authentication
And the following Windows 7 PCs:
internalclient.contoso.com
externalclient.fabrikam.com
There's no trust between the domains, the external client is completely separate on the internet but the CA certificate for contoso.com has been installed in the trusted Root CA store. All servers have certificates for secure RDP.
I enrolled for a custom 'Smart Card Authentication' certificate with Client Authentication and Smart Card Logon EKUs from the CA, stored on my new Gemalto smart card using the Microsoft Base Smart Card CSP.
From internalclient.contoso.com, I can RDP to fileserver.contoso.com
using the smart card just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using a username and password just fine with no certificate errors.
From externalclient.fabrikam.com, I can RDP to fileserver.contoso.com
via rdsgateway.contoso.com using the smart card to authenticate to the gateway, and a username and password to authenticate to the end server, just fine.
BUT from when using a smart card to authenticate to the end server via the gateway, it fails with:
The specified user name does not exist. Verify the username and try logging in again. If the problem continues, contact your system administrator or technical support.
When I move the client into the internal network and try the connection again (still via the RDS Gateway), it works fine - the only thing I can think of is being outside the network and not being able to contact the AD DS DC for Kerberos is causing the issue
- but I'm pretty sure this is a supported scenario?
The smart card works fine internally, the subject of the certificate is the user's common name (John Smith) and the only SAN is
[email protected] which matches the UPN of the user account as it was auto-enrolled.
Does anyone have any ideas?I had a similar issue where I am using a smart card through a Remote Desktop Gateway. I had to disable Network Level Authentication (NLA) on the destination Remote Desktop Server. If anyone has another way around this, I'd appreciate hearing it. I'd prefer
to use NLA. -
REP-52005: The specified key userlogin does not exist in the key map file.
Hi,
I am using oracle 11g report server. I am getting the error of REP-52005: The specified key userlogin does not exist in the key map file.
I updated the user_string in cgicmd.dat file. My cgicmd.dat file content is below
; OracleAS Reports Services ;
; CGICMD.DAT ;
; Example CGICMD.DAT Mapping file ;
; Syntax:
; KEY : VALUE
; Where:
; KEY - the first argument of the rwservlet URL request (case sensitive).
; VALUE - command line parameters and/or special parameters.
; Keys can be referenced in the following ways:
; 1. Parameter on command line to the reports servlet
; e.g. http://machine/servlet/rwservlet?KEY
; 2. Parameter on command line to a reports jsp
; e.g. http://machine/mydir/myreport.jsp?KEY
; 3. Within a reports jsp - in the rw:report custom tag
; e.g. <rw:report parameters="KEY">
; In addition to the Reports Server command line parameters, VALUE can include special parameters
; represented as "%X", where X identifies the parameter. Currently recognized special
; parameters:
; %0 - %9 - 0..9 arguments from original rwservlet URL request. Note that %0 refers to the key itself.
; %* - entire contents (all arguments) of original rwservlet URL request.
; %D - request users to input database userid everytime they run the report.
; %P - request for report parameter form in HTML format. It generates the PARAMFORM=HTML
; construction on the first submission of the URL and PARAMFORM=NO upon parameter form submission.
; CGICMD.DAT Usage Notes
; 1. Multiple keys in this file MUST be separated by an EXTRA empty line.
; 2. Extra spaces are ignored. Multi-line entries allowed.
; 3. Lines starting with ";" character are treated as a comments.
; 4. Comments within a key or key value are NOT allowed.
; 5. NLS language support is provided and can be used (encoding should match the one
; used in HTML request - no language conversion of any kind is attempted.
; 6. For %P special parameter, HTML format is by default mapped to the HTMLTABLE format in this release.
; The HTML format in the future may be mapped to the HTMLCSS format.
;;;;;;;;;;;; Example Key Entries
; Example 1: Run a simple breakb report and output to HTML
orqa: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 2: prompt for userid the first time, then use database userid stored in the cookie subsequently.
report_defaultid: report=breakb.rdf destype=cache desformat=html server=repserver
; Example 3: use %D to require user authentication every time
report_secure: report=breakb.rdf destype=cache desformat=html server=repserver1 %D
; Example 4: Take all arguments from URL and send it to the reports server
run: %*
; Example 5: Run breakb report with HTML parameter form.
breakbparam : report=breakb.rdf destype=cache desformat=html server=repserver userid=scott/tiger@mydb %P
; Example 6: take all URL arguments, and also generate a HTML parameter form
runp: %* %P
; Example 7: Run an Express Report. Replace <MYHOST> with the name of the machine running the Express server. The
; builder on-line help explains the rest of the parameters (the /sl, st etc. etc.)
express: report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott/tiger@mydb destype=cache server=repserver
;;;;;;;;;;;; Keys for Reports Demos
; Using default/in-process server.
; JSPs
;charthyperlink_ias: userid="scott/tiger@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=%DBHOSTNAME%)(PORT=%DBPORT%))(CONNECT_DATA=(SID=%DBSID%)))" %*
;charthyperlink_ids: userid=scott/tiger@ %*
;barcodeweb: userid=oe
;parmformjsp: userid=oe
;tutorial: userid=oe
; Paper Reports
;xmldata: userid=oe report=inventory_report.rdf destype=cache p_filelocation="http://%HOSTNAME%:%OC4JPORT%/reports/examples/xml_pds/scripts/" desformat=pdf
;barcodepaper: userid=oe report=shippingmanifest.rdf destype=cache desformat=pdf
;distributionpaper: userid=oe report=inventory_report_dist.rdf distribute=yes destination=exampledistribution.xml
;pdfenhancements: userid=oe report=utf8test.rdf destype=cache desformat=pdf
userlogin : userid=SYMFINBTOTEST@fin10r21 %*
As in the above file i have added a key as userlogin at the end of the file. But the reports server does not take the key that i have given. I followed the same steps provided in oracle docs. I used "showmap" to check the cgicmd file that is used by the reports
http://aspirevm8-17.aspiresys.com:9002/reports/rwservlet/showmap?server=bluQubeReportsAtLocalEnv&destype&userid=SYMFINBT…
It shows me the content of the cgicmd.dat file and it also shows my updations. But in the "Parsed Map File Entries" it does not show my key value pair
Parsed Map File Entries
Return to Top
Key Name
Value
runp
%* %P
breakbparam
report=breakb.rdf destype=cache desformat=html server=repserver userid=scott@mydb %P
report_defaultid
report=breakb.rdf destype=cache desformat=html server=repserver
run
report_secure
report=breakb.rdf destype=cache desformat=html server=repserver %D
express
report=my_expr_rep express_server="server=ncacn_ip_tcp:<MYHOST>/sl=1/st=1/ct=0/sv=1/" desformat=htmlcss userid=scott@mydb destype=cache server=repserver
orqa
report=breakb.rdf destype=cache desformat=html server=repserver
Please help me to to make the key being populated here and being used by the reports server.
Thanks,
Priyauncomment #KEYPMAPFILE=CGICMD.DAT. remove the #
then for development set
reloadkeymap=yes (same file - rwservlet.properties).
Now it should reload everytime. (otherwise for every change u need to restart oc4j_bi_forms)
(For * production* may be you want to set reloadkeymap=no once all testing is done)
see cgicmd.dat for many examples of using keymap file
[ All Docs for all versions ]
http://otn.oracle.com/documentation/reports.html
[ Publishing reports to web - 10G ]
http://download.oracle.com/docs/html/B10314_01/toc.htm (html)
http://download.oracle.com/docs/pdf/B10314_01.pdf (pdf)
[ Building reports - 10G ]
http://download.oracle.com/docs/pdf/B10602_01.pdf (pdf)
http://download.oracle.com/docs/html/B10602_01/toc.htm (html)
[ Forms Reports Integration whitepaper 9i/10g ]
9i - http://otn.oracle.com/products/forms/pdf/frm9isrw9i.pdf
10g - http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
http://www.oracle.com/technology/products/forms/techlisting10g.html
--------------------------------------------------------------------------------- -
The selected context node does not have attributes - Message no. SWDP_WB_TO
Hello,
I am trying out the example in web dynpro documentation -> Creating a Simple Flight Info Application
and in part 3 steps 11 - 13 I get the following error
The selected context node does not have attributes
and the associated message class and # is :
Message no. SWDP_WB_TOOL467
can anyone please help ?Hi Raj,
Have you done the steps 7 and 8 as described
7. Create an additional node called u201CflightSu201D, this time with the cardinality 0..n.
8. Use the Create Using Wizard option of the context node again to define attributes from the SFLIGHT structure for this new node (see part 1, step 15). Choose the following fields: CARRID, CONNID, FLDATE, PRICE and PLANETYPE.
See the flights node , if there are no attributes the perform the steps as described in 8. -
I have a server 2012 machine running RDP and a PDC running SBS 2007. Every once a while all my users get an error saying "The specified domain either does not exist or could not be contacted". After waiting ~5-10 minutes the issue resolves itself.
I believe it has something to do with the syncing between the two but am not 100% sure. Anyone know a fix or what I should look at?
Jerry THi Jerry,
Thank you for posting in Windows Server Forum.
After referring to your error, it seems to have DNS issue in your case which can’t locate the DC. Please check the setting related to DNS issue as following. (Below quoted from
this thread)
If this is the case, I would recommend proceeding like that:
1. Make sure that each DC has only one IP address in use and ONLY one NIC card enabled (Other NICs should be disabled)
2. Make sure that public DNS servers are configured as DNS forwarders and not in IP settings of DCs
3. Choose a healthy DC / DNS server and make each DC point to it as primary DNS server
4. Make each DC / DNS server point to its private IP address as secondary DNS server
5. Make sure that needed ports for AD replication are opened: http://technet.microsoft.com/en-us/library/bb727063.aspx
6. Check your DNS zones and remove manually all obsolete / unused DNS records for DCs
Once done, run ipconfig /registerdns and restart netlogon on each DC you have.
On the client computer, run ipconfig /flushdns and check again.
Hope it helps!
Thanks.
Dharmesh Solanki
Maybe you are looking for
-
Since updating my iPhone 3GS on my friends laptop, it keeps asking for her iTunes Id not mine. When I log onto a computer it comes up with my Id but from my phone it's my friends. I don't have an option to change the user Id when it pops up either. S
-
Settings for 101 movement while accepting the service entry sheet
Hi All, Please let me know the settings required to do a 101 movement in the background when a service entry sheet is getting accepted using ML81N. Regards, Ashwin
-
EmailSubmitButton's "Select Email Client" dialog different in Reader XI?
With Adobe Reader X we used to get a dialog looking as below: When selecting Internet Email one was offered to save the file as XML. With Reader XI it looks like (in Swedish): In this dialog there seems to be no way of saving the data as XML. Instead
-
MBP started making a cracking sound
My MacBook Pro 2010 started making a "crack" sound every 10 seconds or so... Like when you connect an audio device, it stops when the volume is off or when the speakers are being used. In my opinion something is failing on the motherboard, such as a
-
Hi, I am trying to run assessment cycle for new GL with transaction code FAGLGA15. In assessment cycle master I have maintained sender rule as posted amount and receiver rule as fixed percentage. Formal cycle check is successful. I have check all th