The selected folder does not contain the current site's homepage

dreamweaver displays the following message when editting some
sites:
"WARNING: The selected folder does not contain the current
site's homepage. The site map cannot be built."
Then my remote info is cleared!
I know I'm obviously not doing something, but there is no
need to clear my remote info!!
edit: I've selected my home page, but this still doesn't
explain why Dreamweaver feels the need to erase my remote
info!!!

> Then my remote info is cleared!
Huh?
This only means that you have not told DW which page is your
home page.
Find it in the local file list, and use the right-click
context menu to so
designate the file.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"ogre11" <[email protected]> wrote in
message
news:f2293h$7lg$[email protected]..
> dreamweaver displays the following message when editting
some sites:
>
> "WARNING: The selected folder does not contain the
current site's
> homepage.
> The site map cannot be built."
>
> Then my remote info is cleared!
>
> I know I'm obviously not doing something, but there is
no need to clear my
> remote info!!
>

Similar Messages

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • "The selected file does not contain audio media ..."

    I'm using Premiere Pro CC in Windows 7. A week ago I created a project using media from an external hard drive. I opened the project today to make changes to it, and a number of the .MTS files show up as missing. When I click on "Link Media" and locate the file -- which shows up as being on the external drive -- I get the following error message: "The selected file does not contain audio media used by clip references in one or more sequences. These audio clip references will be deleted, and cannot be undone. Do you want to continue?" I have canceled out of it because I do not want to damage my project irreparably, but I'm trying to determine the best course of action in re-linking these clips that are essential to the project. (I did apply a Left Fill to all the audio in the project, but I don't know if that would cause a problem, or if it did, how I could remove that effect. I've tried to re-link with several previous autosave versions of the project, only to get the same result.)

    Try this:
    FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

  • Source not found: The source attachment does not contain the source........

    Source not found: The source attachment does not contain the source for the file ClassLoader.Class
    Hey,
    I'm running eclipse Version: 3.2.2 Build id: M20070212-1330, on a Vista Home Premium Toshiba laptop. Everything was working fine before i installed the Java JDK 5 and JDK 6. Now all of sudden when i try to run one my programs that worked in the past i get the following error:
    java.lang.UnsupportedClassVersionError: Bad version number in .class file
         at java.lang.ClassLoader.defineClass1(Native Method)
         at java.lang.ClassLoader.defineClass(Unknown Source)
         at java.security.SecureClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.defineClass(Unknown Source)
         at java.net.URLClassLoader.access$100(Unknown Source)
         at java.net.URLClassLoader$1.run(Unknown Source)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClass(Unknown Source)
         at java.lang.ClassLoader.loadClassInternal(Unknown Source)
    Exception in thread "main"
    I'm not sure where to go from here...I've looked up a few articles that mention going into some system.ini files...etc... to make sure the variable are ok but i feel like i'm getting in over my head.
    Thanks in advance for your thoughts,
    Struggling to Run

    Ok...after I thought everything was going well enough.... problems are arising.
    Here's where I'm at and that will include how i got a "nano" error. After a lot of late night messing around I ended up installing a few important component that seem to have done some good. Firstly i installed j2sdk-1_4_2_18-windows-i586-p and ended up with a few good things. Windows was happy when i changed the path variables in the environment setting to point to the newly created c:\program files\java\j2re1.4.2_18\bin folder. This allowed me to start up eclipse properly and use some functions in CMD. In CMD when i use the command java -version it reads Java version 1_.4_.2_1_8. Next i installed the j2sdk-1_4_2_13 jre 1.6.0 environment and ended up with a new folder in C:\Program Files\Java\jre1.6.0 as well.
    with the two environments installed i thought i was ready fro the next step.
    I got started on eclipse and now that it was opening i was feeling good. Next i opened window --> preferences --> java --> installed jre's and i started adding things like crazy. My current list of comprised of many things which I'm certain should all be there at this point so I'll list them:
    j2sdk1.4.2_13 - C:\j2sdk1.4.2_13
    j2re1.4.2_18 - C:\Program Files\Java\j2re1.4.2_18
    j2sdk1.4.2_18 - C:\j2sdk1.4.2_18\jre
    j2sdk1.6.0 - C:\Program Files\Java\jre1.6.0
    jdk1.6.0 - C:\Program Files\Java\jdk1.6.0
    I've set the preferred jre to be set to jdk1.6.0 - C:\Program Files\Java\jdk1.6.0 and it seems to work for all of my programs that do not have the input.scanner. However for the projects that do have this method i get a few different errors:
    1___________
    java.lang.NoClassDefFoundError: couponCounter/CouponCounter
    Exception in thread "main"
    2__________
    Exception in thread "main" java.lang.Error: Unresolved compilation problem:
         Syntax error, insert "}" to complete ClassBody
         at BensCalculator.main(BensCalculator.java:112)
    Now i feel like the second error is lying to me because i know that bit of code is written properly.... i believe it is related to a problem not locating the proper classes.
    Anyhow I'm still pushing along but some help at this point would be much appreciated. It's very weird some things with the scanner are working now..... I don't know I'm not totally convinced yet everything is OK.
    Thank you

  • The source drive does not contain the HP Recovery Image

    I'm trying to create a bootable USB stick with the Recovery disk creation utility of HP. After having moaned that my 8560w was running on battery, and that there was no room on a 16 GB FAT32 formated USB stick, I finally came to the next screen that says "The source drive does not contain the HP Recovery Image" which is wrong: partition D is primary, contains the recovery disk. So what ? No way to create a recovery disk ? Note also that I have no Recovery Manager (???) and that F11 has never worked (??????). HP decision to get out of the PC business is probably the best thing that could happen to customers.
    pher
    This question was solved.
    View Solution.

    Hi,
    Check the below link:
    Creating Recovery Discs or Saving a Recovery Image to a USB Flash Drive (Windows 7)
    Quote from this document:
    "Use a blank USB flash drive with at least 32 GB of memory. HP recommends using a name brand from a manufacturer you trust."
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • The Downloaded PDF file does not contain the Signature through BSP pages

    HI,
    We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
    This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
    To satisfy the above requirement we have done the following steps.
    1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person. 
    We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
    2) WE also Modifed the Dirver program to Download the above document in a .PDF  file. 
    The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
    We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
    3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
    4) We wrote a BSP program to download this ulploaded PDF Files.
    BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
    The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
    All other data in the dowloaded PDF file is Perfect other than the Signature.
    When we open the downlaoded PDF file it give's following  message on the Signautre page.
    " Xobject not found named 00013"
    The number of the Object comes different to different files.
    We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
    We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
    Please suggest some solution if you can
    Thanks in advnace.
    Re
    GAGAN

    HI,
    We have an requirement for Distributing the FORM 16 to all Employee's through our Website, where the user will login and download his own FORM 16 ( TDS Certificate)
    This FORM 16 ( TDS Certificate ) is generated in SAP ( ECC 6.0 ) in Payroll Module.
    To satisfy the above requirement we have done the following steps.
    1) First we have modified the standards SAP Sapscript(Layout) to incorporate the Signature of Authorised Payroll Person. 
    We have done this by uploading the BMP file ( though t-code SE78 ) and then calling this file in the Standards layout which prints the FORM 16 document.
    2) WE also Modifed the Dirver program to Download the above document in a .PDF  file. 
    The Program creates the seperate file for each employee and assigns the employee number as a file name to each downloaded file. These all files are downloaded on a Users Machine.
    We opened the Downloaded .PDF files, and checked for the Signatures. The Signature were comming perfect as it ws uploaded.
    3) We uploaded these all FORM 16 PDF file off all emlpoyee's to a different SERVER ( BW 7.0 ). With the help of BASIS person, using the FTP utility.
    4) We wrote a BSP program to download this ulploaded PDF Files.
    BUT we are facing a PROBLEM in the DOWNLOADED PDF file.
    The Downloaded file does not contain the Signature which is there is the Original file we uploded this server.
    All other data in the dowloaded PDF file is Perfect other than the Signature.
    When we open the downlaoded PDF file it give's following  message on the Signautre page.
    " Xobject not found named 00013"
    The number of the Object comes different to different files.
    We are using Function module 'SCMS_STRING_TO_XSTRING' to Convert string to Xstring
    We are using the the " CALL METHOD CL_BSP_UTILITY=>DOWNLOAD" for downloading the PDF file.
    Please suggest some solution if you can
    Thanks in advnace.
    Re
    GAGAN

  • Error: The folder does not contain a valid Flex Builder Project.

    HI All,
    My first Post here. I am new to Flex Hardly 10 days old. I
    want to open the flexstore project in flex builder 3 and could not
    able to do so.
    What I did: file->import->.... got the error msg as
    "The folder does not contain a valid Flex Builder Project".
    also tried file->import->general->..... same error
    msg.
    I need your Help guys
    I downloaded the sample project from
    http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
    Thanks in Advance
    SAS
    Text

    "shakeb66" <[email protected]> wrote in
    message
    news:gknbn8$av9$[email protected]..
    > HI All,
    > My first Post here. I am new to Flex Hardly 10 days old.
    I want to open
    > the
    > flexstore project in flex builder 3 and could not able
    to do so.
    > What I did: file->import->.... got the error msg
    as "The folder does not
    > contain a valid Flex Builder Project".
    > also tried file->import->general->..... same
    error msg.
    > I need your Help guys
    > I downloaded the sample project from
    >
    >
    http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
    Try creating a new Flex project and dragging the files from
    the zip into the
    src folder. You may find that you need to rearrange things a
    bit, depending
    on how they set up the project, but this should get you
    started.
    HTH;
    Amy

  • I have selected to have photos in my icloud but the photo folder does not appear.

    I have selected to have photos in my icloud but the photo folder does not appear in icloud. There are many folders, like mail, but none for photos.

    You can see photo stream photos on icloud.com.  You can only see them on an iOS device or computer that is signed into your account with photo stream enabled.  If you want to see them on the web, you would have to add the photos to a shared stream using the public website option enabled (see http://help.apple.com/icloud/#/mmc0cd7e99).  This gives you a private url allowing you to view them from any computer browser.

  • What does it mean, "the selected folder is not scannable" in Preview

    I am trying to scan a document using a document feeder (Epson Workforce 633). It worked fine under Lion. Now trying it under ML, I get the message "The selected folder is not scannable." I don't see where one selects a folder and I can't find any menu that permits me to select any scanning target.

    Quit Preview, delete the ~/Library/Containers/com.apple.Preview folder, and then relaunch Preview.
    Hope this helps.

  • MDT 2013 The source directory does not contain an identifiable operating system

    Hi, 
    I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
    sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS? 
    Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it. 
    Chaitanya.
    Chaitanya.

    Hi, 
    I am using MDT 2013 and I am trying to deploy server 2008 in it. I mount my 2008 iso file, import OS, then select full set of source files, and enter D:\ . It says, "The source directory does not contain an identifiable operating system". I am
    sure that install.wim file is present in sources folder. What other folders/files does it need while importing OS? 
    Note: it is an customized OS. It has MS hotfixes and dotnet 4.5 installation package in it. 
    Chaitanya.
    Chaitanya.
    This is expected behavior because Server 2008 is unsupported in MDT 2013:
    http://deploymentresearch.com/Research/Post/330/What-if-I-told-you-The-OSD-Support-Matrix-for-MDT-and-ConfigMgr-is-here
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • I have my first mac. the music folder does not appear in favourites from the finder menu so i cant transfer my itunes library

    I have my first mac. I want to transfer my iTunes library from my pc but the music folder does not appear in favourites when I select finder.

    Choose Home from the Finder's Go menu.
    (117823)

  • Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching.

    Hello all,
    I am using the IMAQ Match Pattern 4 to detect the rotation angle of a template image. However, it shows the error: "Error 1074395241: The template descriptor does not contain data required for rotation-invariant matching." What is the problem exactly? How to solve this? The details are explained below.
    My project is a little bit complicated. Part of the block diagram containing the IMAQ Match Pattern 4 is shown below:
    The source image is a series of frames of images read from an AVI video (I used a for loop to process the images frame by frame). The template image is a selected region of the first frame. So it means, the user selected the object of ineterst in the first frame of the video, and in each of the following frames, we need to find the matched object of interest & determine its rotation angle. When I run the block diagram shown above, it does not have any error. However, it shows the rotation angle as zero no matter what it "really" is. Therefore, I changed the block diagram by adding the parameters, shown below:
    But in this case, when I run it, it shows the error that I have indicated in the subject line.
    If you need more details about my project to identify the problem, please let me know.
    Thanks in advance.
    Solved!
    Go to Solution.

    -Please go through pattern matching example which comes along with labview fiirst
    Go to labview Help>>Find Examples and you can search for example.
    -You have create template with angle range and what type of pattern matching you want use.
    -For this you have to use IMAQ Learn Pattern before using IMAQ Match Pattern 4
    Refer :http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/
    Thanks
    uday,
    Please Mark the solution as accepted if your problem is solved and help author by clicking on kudoes
    Certified LabVIEW Associate Developer (CLAD) Using LV13

  • SCCM 2012 - Adding Operating System Installer (The specified path does not contain a valid operating system ..)

    I have encountered the dreaded "The specified path does not contain a valid operating system or you do not have permission to access it.  Specify a valid path" message that seems to be popular in many forums .... BUT, so far none of the "solutions"
    have fixed the problem (of I don't understand the fix)
    Configuration
    SCCM 2012 SP1 5.0.7804.1000
    WADK 8.100.26629.0  < Suggested Fix
    Server 2008 R2
    SCCM Administrator with UserID = SCCMAdmin 
    Steps / Fixes I have followed
    I have configured a administrative share
    \\caleb\sources$ to hold directories (such as Apps, Drivers, and OS) with the following NTFS Permissions
    EVERYONE has Read and Execute, List folder, Read permissions<o:p></o:p>
    SYSTEM has Full Control 
    <Suggested Fix
    SCCMManagers (our group that has all SCCMManagers) has Full Control<o:p></o:p>
    SCCMAdmin (the SCCM Admin account that we are using to import image) has Full Control<o:p></o:p>
    Local Administrators (the local machine administrator) has Full Control 
    <Suggested Fix
    <o:p></o:p>
    Another Fix is to explicitly grant all permissions to the SCCM Administrator
    <Suggested Fix
    >Administrative Users ...
    Properties of the SCCM Administrator (for us that is SCCMAdmin) has all the boxes checked<o:p></o:p>
    Another suggestion I was able to glean was to Specify the Network Access Account
    so I configured SCCMAdmin as the Network Access Account.
    Another potential fix is that the image ISO file that has been downloaded is corrupt.   So, I downloaded the Win 7 (and Win 8.1) ISO's from MSDN and did a Checksum check.
    I then mounted the ISO (on 2008R2 I use VirtualClone Drive) and copied the contents of the image to
    E:\Sources\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896 for Windows 7 with SP1
    To double check,
    I computed the Hash on the Install.WIM located in the Sources directory and compared with
    the computed Has Tag for the Install.WIM on the ISO Image  ... and the Hash tag of the WIM's matched (extracted vs what is contained within the ISO)<o:p></o:p>
    I tried to load the images into SCCM 2012 using the "Operating System Installers" option
    UNC to installer
    \\caleb\sources$\OS\en_windows_7_professional_with_sp1_vl_build_x86_dvd_u_677896
    Then I receive the lovely message <o:p></o:p>
    "The specified path does not contain a valid operating system or you do not have permission to access it.  Specify a valid path"<o:p></o:p>
    <o:p> </o:p>
    From
    C:\Program Files (x86)\Microsoft Configuration
    Manager\AdminConsole\AdminUILog\SmsAdminUI.log<o:p></o:p>
    <o:p> </o:p>
    \r\nSystem.Management.ManagementException\r\nGeneric failure \r\n  
    at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus
    errorCode)
       at System.Management.ManagementObject.InvokeMethod(String
    methodName, ManagementBaseObject inParameters, InvokeMethodOptions options)
       at
    Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.ExecuteMethod(String
    methodClass, String methodName, Dictionary`2 methodParameters, Boolean
    traceParameters)\r\nManagementException details:
    instance of SMS_ExtendedStatus
     Description = "Failed to get the image property from the source WIM
    file due to error 80070002";
     ErrorCode = 2147942402;
     File ="e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\sspimagepackage.cpp";
     Line = 586;
     Operation = "ExecMethod";
     ParameterInfo = "SMS_OperatingSystemInstallPackage";
     ProviderName = "WinMgmt";
     StatusCode = 2147749889;
    \r\n<o:p></o:p>
    What am I missing ????  I assume something simple but, darn I'm stumped!!!

    Hi,
    Configuration Manager version
    Windows AIK or Windows ADK Version
    Windows PE versions for boot images customizable from the Configuration Manager console
    Supported Windows PE versions for boot images not customizable from the Configuration Manager console
    System Center 2012 Configuration Manager with no service pack
    Windows AIK for Windows 7
    Windows PE 3
    None
    System Center 2012 Configuration Manager with SP1
    Windows ADK for Windows 8
    Windows PE 4
    None
    System Center 2012 Configuration Manager with SP1 and cumulative update 2
    Windows ADK for Windows 8
    Windows PE 4
    Windows PE 3.11
    System Center 2012 Configuration Manager with SP1 and cumulative update 3
    Windows ADK for Windows 8
    Windows PE 4
    Windows PE 3.11 and Windows PE 5
    System Center 2012 R2 Configuration Manager
    Windows ADK for Windows 8.1
    Windows PE 5
    Windows PE 3.11
    Please try to install the Windows ADK for Windows 8.
    http://www.microsoft.com/en-us/download/details.aspx?id=30652
    For more information, please review the link below:
    http://technet.microsoft.com/en-us/library/gg682187.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Database schema SCM does not contain the associated database objects

    I am getting the following error when i am trying to migrate the form to apex using application migration.
    "*Database schema SCM does not contain the associated database objects for the project, aafs.*
    *Ensure the database schema associated with the project contains the database objects associated with the uploaded Forms Module .XML file(s).* ".
    Actully i am having one schema which i named as SCM, and i have defined one table TT.
    I created one form test.fmb in which i used TT table.its compiled successfully.
    Then i generated the xml file using frmf2xml from fmb file. After that, I created the project in appication migration wizard in SCM schema.
    Project creattion is working fine.but when i m trying to create application,it is showing me above error.
    can any one help in solving this problem.

    Hi Hilary,
    Thanks for your response/feedback.
    1. The schema associated with the project does not contain the necessary objects Can you please verify that the schema associated with your Forms conversion project does in fact contain the objects associated with the uploaded files. Could you also verify that the object names referenced in the error message do not exist within the schema associated with your workspace. Ensure that the schema associated with the project contains the necessary database objects before proceeding to the generation phase of the conversion process.
    Ans:
    Yes it does contain the objects (See results from SQL query Commands below):
    SELECT MWRA_CONTRACT_NO, OLD_CONTRACT_NO FROM PROJECTS@CONTRACT_LX19.MWRA.NET
    ORDER BY MWRA_CONTRACT_NO
    000000569 551TA
    000000570 553TA
    000000575 560TA
    000000576 561TA
    000107888 502TA
    000108498 500TA
    000108502 503TA
    2. The block being converted contains buttons, which may have been incorrectly identified as database columns, and included in the original or enhanced query associated with your block This is a known issue ,bug 9827853, and a fix will be available in our upcoming 4.0.1 patch release. Some possible solutions to this issue are:
    -> delete the buttons before generating the XML
    -> delete the button tags from the XML
    -> add "DatabaseItem=No" for the button in the XML file before importing it in Apex.The button is excluded when creating the Application.
    Ans
    yes it does contain push buttons to transfer to another forms and these are defined as Non data base items. Parial XML code provided below:
    - <Item Name="REPORTS" FontSize="900" DirtyInfo="true" Height="188" XPosition="4409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="REPORTS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
    <Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('REPORT_1');" />
    </Item>
    - <Item Name="TRACKHDR" FontSize="900" DirtyInfo="true" Height="188" XPosition="3409" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3709" FontSpacing="Normal" Label="TRACK" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
    <Trigger Name="WHEN-BUTTON-PRESSED" TriggerText="GO_BLOCK('TRACKHDRS');" />
    </Item>
    - <Item Name="SUBAWRD" FontSize="900" DirtyInfo="true" Height="188" XPosition="2429" FontName="Fixedsys" ForegroundColor="black" DatabaseItem="false" Width="948" CompressionQuality="None" YPosition="3719" FontSpacing="Normal" Label="SUBAWARDS" BackColor="canvas" FillPattern="transparent" ShowHorizontalScrollbar="false" FontWeight="Medium" ShowVerticalScrollbar="false" FontStyle="Plain" ItemType="Push Button">
    3. If you are still experiencing issues, then please create a testcase on apex.oracle.com and update this thread with the workspace details so I can take a look.
    Test case details are given below. It was created per ORACLE for open Service Request Number 3-1938902931 on ORACLE Metalink.
    Workspace: contract4
    username: [email protected] (my email)
    Password: contract4
    Comments:
    For my migration/testing purpose a dabatase link and synonyms have been setup by our ORACLE DBA. Could this be causing this problem?
    Do we know when the fix 4.0.1 patch release will be available?
    Thanks for your help.
    Indra

  • Certificate does not contain the correct site name

    Hello,
    I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
    I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
    import java.io.*;
    import javax.microedition.midlet.*;
    import javax.microedition.io.*;
    import javax.microedition.lcdui.*;
    public class HelloNet extends MIDlet implements CommandListener , Runnable{
    // User interface command to exit the current
    // application.
    private Command exitCommand = new Command("Exit",
    Command.EXIT, 2);
    // User interface command to issue an HTTP GET
    // request.
    private Command getCommand = new Command("Get",
    Command.SCREEN, 1);
    /// The current display object.
    private Display display;
    // The url to GET from the 'net.
    private String url;
    * Initialize the MIDlet with a handle to the
    * current display.
    public HelloNet() {
    url = "https://127.0.0.1:8443/Hello.txt";
         display = Display.getDisplay(this);
    * This lifecycle method should return immediately
    * to keep the dispatcher
    * from hanging.
    public void startApp() {
         showPrompt();
    * Display the main screen.
    void showPrompt() {
    String s = "Press Get to fetch " + url;
    TextBox t = new TextBox("Http Result", s,
    s.length(), 0);
    t.addCommand(exitCommand);
    t.addCommand(getCommand);
    t.setCommandListener(this);
         display.setCurrent(t);
    * pauseApp signals the thread to stop by clearing
    * the thread field.
    * If stopped incorrectly, it will be restarted from
    * scratch later.
    public void pauseApp() {
    * destroyApp must cleanup everything. The thread
    * is signaled
    * to stop and no result is produced.
    * @param unconditional is a flag to indicate that
    * forced shutdown
    * is requested
    public void destroyApp(boolean unconditional) {
    * commandAction responds to commands
    * @param c command to perform
    * @param s Screen displayable object
    public void commandAction(Command c, Displayable s) {
         if (c == exitCommand) {
         destroyApp(false);
         notifyDestroyed();
         } else if (c == getCommand) {
              Thread th= new Thread (this);
              th.start();
    * Read the content of the page.
    public void run() {
    TextBox t = null;
    StringBuffer b = new StringBuffer();
    HttpsConnection c = null;
    InputStream is = null;
         try {
         int len = 0;
         int ch = 0;
         System.out.println("Cerco di leggere");
    c = (HttpsConnection)Connector.open(url);
    c.setRequestMethod(HttpsConnection.GET);
         is = c.openInputStream();
    // length of content to be read.
    len = (int) c.getLength();
    if (len != -1) {
    // Read exactly Content-Length bytes
    for(int i=0; i<len; i++) {
    if((ch = is.read()) != -1) {
    b.append((char) ch);
    } else {
    // Read until connection is closed.
    while((ch = is.read()) != -1) {
    len = is.available();
    b.append((char) ch);
    t = new TextBox("Https Result", b.toString(),
    b.length(), 0);
         } catch (Exception e) {
    e.printStackTrace();
    String s = e.toString();
    if(s != null) {
    t = new TextBox("Https Error", s, s.length(),
    0);
    } finally {
    if (is != null) {
         try {
              is.close();
         } catch (Exception ce) { }
    if (c != null) {
         try {
              c.close();
         } catch (Exception ce) { }
    display.setCurrent(t);
    }

    re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
    As for the rest:
    See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1.

Maybe you are looking for

  • Adding OR condition gives ORA-00920 error

    I am trying to write a xquery like this - for $VAR3 in document("DS")/db/V_ViewName where (($VAR3/CODE eq $#PARAM of type xs:string) or (xf:empty($#PARAM of type xs:string)))      return      <stuff>           <stuff_name>{  treat as xs:string(xf:dat

  • Low memory problem in nokia c5-03

    I wanted to install the Viber application for Nokia on my phone. But the memory is low and a message is displayed "Low memory on C".  I have deleted all my messages and images are also not present. I have checked the phone memory the total size of th

  • Ichat on ipad

    I have recently bought an Ipad 2. I can only be impressed with the feel and appearance of it but at that point my admiration stops. WI am more angered by what it WON'T do. Flash of course and video in face book and messenger why won't the camera work

  • Deprecated system parameters with specified values:

    Hi , I am getting below in alert log: Deprecated system parameters with specified values: remote_os_authent IS this parameter is suppotable in 11G and also how can i remove it from SP file with out bouncing the instance. thanks..

  • Need to find out the hierarchy information of a particular Menu

    I have written a query using "select ... start with initial-condition connect by recurse-condition" syntax to get the Hierarchical information for a prticular menu. select count(SUB_MENU_ID) from FND_MENU_ENTRIES_VL start with MENU_ID = 76580 and SUB