The Sender agreement has another channel

Hi all you guys
I have the following problem:
I create a scenario RFC --> XI --> JDBC in wich I configure the sender agreement:
SERVICE : SYSTEM A
INTERFACE: INTERFACE A
COMM CHANNEL: cc_sender_RFC_A
THEN I create another cc by security issues with the user that is used in the first cc for another scenario RFC --> XI -- JDBC and its sender agreement was created like that
SERVICE : SYSTEM A
INTERFACE: INTERFACE B
COMM CHANNEL: cc_sender_RFC_B
but in the RWB its trow the following error:
Wrong Sender Agreement:The Sender agreement does not have channel cc_sender_RFC_B configured for the function module
INTERFACE A
IINTERFACE A and INTERFACE B are function modules.
Any ideas with that?

Hi,
When you are sending messages from same system in both the cases what is the need of creating another communication channel?
Thanks,
Vijay Kumar T.

Similar Messages

Wrong Sender Agreement:The Sender agreement does not have channel

Hi Guys,
I am trying RFC to File scenarion where I am triggering a report which is calling a RFC module I have given the destinaztion name correct .When I am executing the report it is failing giving the following error
"Wrong Sender Agreement:The Sender agreement does not have channel"
I have checked that sender agreement is there.
Also when Iam changing the RFC call by removing IMPORTING parameters and adding IN BACKGROUND TASK It is getting executed and goin to XI successfullly but after adding IMPORTING Param it is failing ?
Any suggestion on the same?
Regards

Hi Guys ,
I have tested the same again from RFC directly without Report and after some time it failed giving 'SYSTEM ERROR'.
When i checked the channel it is giving following error:
Error: 2008-01-10 13:36:19 IST: Message processed for interface Z_RFC_TESTSYNCASYNC: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 500 : Timeout
Any help now ?
Regards

Why we dont need sender agreement and comm channel in IDOC to file scenario

Hi,
there are 2 queries:
first query :
Scenario is "Idoc to file transfer"
why we dont need sender agreement and communication channel for IDOC to file ,while we do need
both of these for "File to RFC "
Answer : which i got is because IDOC sits at ABAP stack but same is valid for RFC also.
Then why For "IDOC to file" we dont need that.
Second query:
Also when i did scenario for File1-RFC-File2 scenario using BPM i have created a interface
between XI-RFC synchronous to send data which we got from file1 in XI to RFC importing parameter
and getting data from RFC back to File2.
Here in IDOC to file scenario why we dont need any interfface for IDOC-XI Asynchronous.
Regards,
Mayank
Edited by: mayank verdia on Jan 13, 2009 11:49 AM
Edited by: mayank verdia on Jan 13, 2009 11:50 AM

Dear All,
For file to idoc scenario is there any possibility to get line items details or xml details i.e the segments and its related field details using reference id, transaction id or interface name or message id in SAP PI 7.0. I know we need to click each and every message in sxi_monitor and look for details.
For SAP(R3 System) I can create a report and set the job for specific time period so automatically it throws the details(like reference no, document date, invoice no from) in ftp path as .csv file. The same ftp path is maintained in program.
I wanted to check FTP--->PI postings and I have set the job at r3 system it is working fine and Im monitoring it too.
Now the end to end scenario is FTP--->PI--->ECC(R3 system). Please help.Many Thanks.

I am not able to send mails through Yahoo APP.It gives me an error msg :"the sender address has ben rejected by the server ".I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.

I am not able to send mails through Yahoo APP. It gives me an error msg :"the sender address has ben rejected by the server ".
I tried adding username and password in the SMTP server settings,But those optiopns are greyed out.
So, i am not able to enter anything in fields under SMTP server settings

You probably have changing settings disabled in Restrictions.

The send button has faded out

been using the MacBook Air all mornng, now the send button has faded out and so I can't click to send mail. What's happened?

Go to the Mail menu top of your screen click Mailbox / Take All Accounts Online

Concepts and Integration Directory ( Channels/Sender agreements)

Hi All,
I have one question on the concepts and Configuration for the Run time scenario in XI.
I am new to XI.
I am done with the designing interfaces, Communication channels (adapter types for outbound and inbound) and the integration scenario.
For the Interface mapping Communication channels are assigned.
In the Integration scenario, Mapping defined above is assigned.
Now in configuration, I imported the scenario and generated the configuration Objects.
Do I have to define communication channel again here for the collaboration profile?
Why is the communication channel coming again here?
Also what is the sender agreement for? When should I define it? If possible any example?
Please help me.
Regards,
Meher

Hi All,
First of Let me thank all for your responses.
I have defined File adapters for sender and receiver through communication channel Template in the Builder.
Now when I import the Integration scenario and create the configuration objects, Communication channels are not getting created from the template. ( In the Connection phase)
When I click on generate Communication channel automatically in the Connections Step a Http connection Channel is created instead.
Should I have to create these manually or will the template server my purpose to import in the configuration?
Regards,
Meher

Is associating communication channel to sender agreement necessary

Hi,
Is it necessary to associate communication channel to sender agreement to pick the message from the specified source directory

Hi Santhosh,
To pick the message from sender side , sender agreement should be required, thre are some cases where we dont need the sender agreement for IDoc Adapter and HTTP adapter. bcz these two adapters are resides on Integration server.
See the below link
http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/45/2c1640033ae569e10000000a155106/content.htm
Regards
Chilla

Is there a way for the sender of an email to see if it has been read

is there a way for the sender of an email to see if the email has been read?

Some email clients allow for you to request a read receipt, but the sender also has the ability to refuse to send it as well. Much of that is controlled on the receiving end.

My "send" button has disappeared and my address list on the left side has disappeared also. How do I retrieve these items?

I have never had a problem sending & or receiving e-mail prior to the past few days. All of a sudden the Send button has disappeared and my address list on the left side has disappeared too.
I did find some help which suggested opening the Write and then press F9 to retrieve the address list. The address list returned on the left but does not appear as it used to ie. full length of the screen. However what is now there will be satisfactory. The "Send " button is still missing which is frustrating as I have not been able to send any e-mails for approximately a week now.
Would appreciate advice as to how to retrieve the above.
Thank you.

Thank you for your advice re: the SEND button having disappeared and also the address list on the left side having disappeared. I must confess that I was not able to get it back myself. This a.m. my computer would not turn on at all. I therefore contacted the company which services it, namely iTOK and a technician read your suggestions and after a bit of manipulation of various things he got them both back. It seems that I had not noticed the "press the alt key" as part of it due to the fact that the 'alt key' was not 'ALT key'. My fault for skimming too quickly. Thanks again for your advice...it worked and now i am back on track.

Test Configuration Tool: Sender Agreement Not Found

Hi, All:
We have new XI3.0 setup and I just want to test simple file to file scenario, but the file was picked up by sender file adapter, however, there is no message sent to Integration server.
When I use Test Configuration Tool, the sender agreement is green, however, it also mention Sender Agreement Not Found, see below:
================================================
Sender Agreement
================================================
futhermore, Interface Mapping is not found either. Actually, Interface has been created on IR. Sender Agreement also created in ID.
Anyone who has idea about these two errors ?
Thanks in advance
Liang

Hi, Raj and Srinivas:
Thanks for your reply.
First of all, all the objects are activated, secondly, when create sender agreement, I just need to input the Sender Service Name / Sender Interface / Sender Interface Namespace. Then finally select commnication channel.
For any Receiver sides, they are grey out, I am not able to input anything.
So, there is no "*" in any fields.
I doubt if there is any setup wrong, especially for adapter engine, maybe some modules that are not functional for file adapter engine, since I also see other problems, I might post them as separate thread.
In Adapter monitor page, I did not see the adapter.
In RWB, if I use IE, there is Error in the page, using Firefox, it is OK.
Thanks And Regards !
Liang

PCK Sender agreement

Hi mates,
At <a href="http://help.sap.com/saphelp_nw04/helpdata/en/db/73e03fc2269615e10000000a155106/content.htm">help.sap.com</a> I see that Sender agreements are not required in cases of proxies, SOAP & Mail adapter.
Since there is no Receiver Determination Step in PCK and receiver has to be mentioned in the Sender Agreement, If Sender agreement is not required for proxies, SOAP & MAIL, how are the receiver party & service mentioned?
Do they have to be sent by the client programs of proxy, SOAP & Mail? If yes, the WSDL generated has to contain the details of the receiver psrty and service too. Is that true?
Please clarify.

As for RD in XI i am pasting lines from sap.help
To forward the message, the following objects are required in the Integration Server:
· Party and service of party A, which sends the message. If there is a signature and you want it to be validated, you must also define a communication channel of type Sender and XI. In this case, you must also create a corresponding sender agreement (SA2).
· Party and service of party B, which receives the message. You must define a communication channel of type Receiver and XI.
· A receiver determination (RD) to determine the receiver of the message.
· An interface determination (ID) to define the inbound interface for the outbound interface of the sender.
· A receiver agreement (RA3) to transfer the message from the Integration Server to the PCK of party B.
Hope it helps.

Sender agreement not updated in XI cache after commit

Hi all,
somehow none of my created sender agreements appears in the XI cache after commit. I also did a complete refresh of the XI chache.
Any ideas?
Thanks!
Denis

Hmm,
I have created sender agreements for SOAP channels, this would explain why I could not see the agreements...
Actually I am wondering why the 'test configuration' tool in the ID brings up an 'java.io.IOException' in the receiver determination. Prior to that the sender agreement lookup fails. So I thought it's the XI Cache...
I restarted the J2EE engine but the problem remains.
Any other ideas?
Thanks so far!

Sender Agreement problem.. in ID

In Integration Directory, I am able to create all the things namely, Business Services and Communication Channels, Interface Determination and Receiver Determination and Receiver agreement but I am unable to create the Sender Agreement.
Let me explain my scenario : File-XI-File.
I have done all the necessary things like SLD part, Design part etc..
I have gone through the blogs by Venkat on File-XI-File Scenario...
If anybody can guide on this that will be very helpful..
Thanks in advance.
Best Regards,
Mona

Hi,
>>I am able to create all the things namely, Business Services and Communication Channels, Interface Determination and Receiver Determination and Receiver agreement but I am unable to create the Sender Agreement.
Create one service and inside that create a Communication channel. Then add your interfaces to it, depending on the type. If it is outbound the add it in the sender tab else in the receiver.
Then right click on the sender agreemnet and create new. Give all the required fields and click save.
Regards
Suraj

Problems using access control in sender agreement for SOAP adapter 7.1

I am trying to use Access Control Lists to restrict user access to web services/interfaces which are exposed via PI. This can be configured via the Integration Builder Directory using the u201CAssigned Usersu201D tab of both Communication Components (Business System) and Sender Agreements.
The configuration is via the above mentioned components. However, I understand that itu2019s the adapters which at runtime are responsible for actually applying these checks.
I have been having problems getting the access control to work using a setup involving a SOAP adapter of type SAP BASIS 7.10.
The symptom of the problem is that although the access control works as expected at the Business System level, any settings at the Sender Agreement level appear to have absolutely no effect whatsoever.
I have confirmed that I have no problems if I use an adapter of type SAP BASIS 7.00. However, I really need to get this working on 7.1.
I have looked on the SAP support portal but can not find any notes that relate to this.
Has anyone else had a similar problem? And have you found a fix for it?
Any suggestions would be welcome.
Edited by: Malcolm Dingle on Jun 17, 2009 1:08 PM

Hi Shai,
Please have a look at the following link and see if it helps you .
It deals with SOAP adapter installation and activation
Re: SOAP adapter installation and activation
Best Regards
Edited by: Prakash Bhatia on May 8, 2009 11:51 AM

Problem with Sender Agreement for EDI File to Idoc scenario

I'm configuring PI for EDI with Seeburger Adapter (Calling as a Module) and I'm having an issue with the Sender Agreement using File Adapter.
Process used is File to IDOC. EDI data will be picked up from VAN (Using existing FTP process rather than using Seeburger FTP) and stored in a folder which is being accessed by PI to send to R/3 to create orders.
All my inbound EDI will be stored in same folder which should be picked up by XI and distribute the same depending upon the respective scenario's in ID and respective mapping/config in IR.
The whole process IR & ID works fine and also creates Idoc in R/3, if I configure for one customer for EDI 850, but when I try to configure for second customer for same EDI 850 having same ANSIX12 version (V4010) as previous customer, I get stuck at the Sender Agreement part for this second customer because I use the same CC for File read for both the customers (Scenarios) and since there is a limitation with File Adapter "sender channel must not be assigned to more than one sender agreement ".
How can I create the Sender Agreement using the same CC for my other scenario?
I tried creating multiple CC for different scenario but when I place a test file for customer A, I see that its being picked up by both CC's.
Pl Advise.
Thanks!
PSR

You need to configure splitter as module in sender file adapter (classifier->bic->splitter) as well as define a message splitter(with partner number and Seeburger mapping) in Seeburger workbench.
Thank you for the reply Aamir,
Do you have any document which can guide me through the process?
Does Seeburger Workbench play any role here? because I'm not using See FTP adapter to connect to my VAN. We get the data from the VAN using FTP process but not using See FTP. I'm using BIC to generate an XSD and SDA file, rest everything is in XI using File to idoc and IDOC to file process.
Thx
PSR

The Sender agreement has another channel

Similar Messages

Maybe you are looking for