The sequence of mater data and transaction loading...

Hi all,
I have 2 questions as follow:
Q1. usually say that loading master before transaction data, but if some problem cause the master data loading fail, and transaction loading is successful, any troubles ?
Q2. In settings of ODS, if the item "BEx reporting" was checked, BW will maintain SID of master data, does it mean that BW will add new records into SID table only or both of master data table(e.g. P, Q tables) and SID table in case of new master data determined? For cube, is there similar situation?
Thanks a lot

Hi Ryan.
A1: There may or may not be problems depending on what the transactional data does as it is loaded. The load itself can be set to fail if master data does not exist already. If this setting is turned off, then there are few possibilities. If there is a straight transactional data load wihout any special lookups, the system will automatically create master data SIDs for the missing values. If a user then runs a query, they may not see any attributes or texts associated with the master data. However, if there are some lookups or master data attributes are written into the InfoCube, then there will be problems as these values are not in master data (due to the load failure). This will cause the data in the InfoCube to be incorrect.
A2: You are correct, BW will automatically create SID table entries for this case. This allows the OLAP engine to run queries on the data. There is nothing special produced in the P or Q tables unless you haev a special routine built to do that. As for the InfoCubes, SIDs are always created. The system presumes that since InfoCubes should have only data related to reporting, then all fields should be reportable and thus have SIDs.
Regards,
Adam

Similar Messages

What is the Sequence of Master data and Transaction data R/3 to APO

Hi guys,
What is the Sequence of Master data and Transaction data R/3 to APO through CIF?

Hi,
Master data,
Material Indipendent data can be sent without any dependency.
Material Dependent data sequence is as follow.
Plant,
MRP areas,
Supply area,
Material,
MRP area material,
planning material,
ATP check,
Purchase info recards,
schedule agg,
PPM or PDS (But before PPM or PDS work center should send to apo) If PDS is sending then BOM should send before PDS.
Transaction data.
As per the business requirement what is planning in apo.
Regards,
Kishore Reddy.

Difference between master data and transactional data

Hi experts i have just started learning BW can u plz let me know the difference between Master data and Transactional data in bw ? and why is master data is first loaded before the transactional data ? thanks .....

Hi
Transaction data represents any transaction occured between two parties like Customer and Vendor.
We maintain id's to maintain the Customer and Vendor.
When we look at the id we don't have a clue like who is the customer, where does he live,,....
So all this info is maintained in Master data in three categories:
1. Attributes
2. Text
3. Hierarchies.
Collection of Attribute, Texts and Hierarchies is called master Data in BI/BW.
Eg: 0MATERIAL, 0CUSTOMER,,,,,
Master data: is data that remains unchanged over a long period of time. Master data contains information that is always needed in the same way. Characteristics can bear master data in BW. With master data you are dealing with attributes, texts or hierarchies.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/58/a4513ce4af0a40e10000000a114084/frameset.htm
Master Data is one form of the historical data. There is no frequent changes in the data.Every application has it's own Master Data.
In BI the master Data has been divided into
Characterstics
Texts
Hierarchies
We can load Master Data through different ways.
Pls. find the below link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/58/a4513ce4af0a40e10000000a114084/frameset.htm
hope it helps u
regards
gaurav

What happens internally while loading master data and transaction?

hello,
What happens internally and which tables are used while loading master data and transaction?
I have loaded the data in DSO, but i am not getting value of particular InfoObject after loading the data.
I have executed Attribute change run also.
Kindly explain ...
Thanks,
Sonu

Hi,
Master data,
Material Indipendent data can be sent without any dependency.
Material Dependent data sequence is as follow.
Plant,
MRP areas,
Supply area,
Material,
MRP area material,
planning material,
ATP check,
Purchase info recards,
schedule agg,
PPM or PDS (But before PPM or PDS work center should send to apo) If PDS is sending then BOM should send before PDS.
Transaction data.
As per the business requirement what is planning in apo.
Regards,
Kishore Reddy.

Downloding the SAP master data and transaction data to a flat file

Hello All,
Is there any SAP standard method or transaction to download the SAP master data and transaction data to flat file.
With out using ABAP development, SAP had provided any tool or method to download the SAP system master and transaction data to flat file.
Thanks,
Feroz.

hi
as of now up to my knowledge no.

What are the settings master data and transaction data from r/3 to in APO.

Hi all,
Can u suggest me ,I need to conform in apo what are the setting when transfering master data and transaction data from r/3 to APO.
frm
babu

Hi
The data get transfered from R3 to APO via CIF which is SAP standard.
Please find enclosed herewith the link which will provide you detail information regarding it.
http://help.sap.com/saphelp_scm41/helpdata/en/9b/954d3baf755b67e10000000a114084/frameset.htm
Please let us know if it helps you. Please also let us know if you have any more specific question.
Thanks
Amol

HT1595 My AppleTV seems to be stuck on the "Setting Date and Time" load page

I just moved from a house to an apartment and when I hooked up my appleTV it said "Setting date and time" with a spinning load wheel and it's been doing this for a long time now. I hit MENU on the remote and tried going to Settings> General> Network like it said at the bottom of the screen, but nothing happened. It's connected to the right WiFi network, but the only icons it shows on the home screen are the 'Computers' icon (for Home Sharing) and the 'Settings' icon. My movies, music, tv shows, netflix etc. icons aren't showing up. I restarted it and got as far as the "Setting date and time" load page again, where it just sits and loads.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
    1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    2.    Also try restarting the router.
    3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If this is a new Apple TV, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Master Data and Transaction Data For DB Connect extracted Data...

Dear Experts,
I have been working on SAP NetWeaver BW 7.3 and for the first time I have extracted data from Oracle DBMS by using DB Connect. I have successfully extracted data of a View namely Sales_View into BW by creating a DataSource. This View has about 100 fields and I have been told that this view consists of Master Data and Transaction Data too. For my further reporting needs say building a Dashboard or InfoSpace I have to design a DSO and InfoCube for this DataSource. I'm bit confused about the Master Data and Transaction Data of this DataSource.
1. Should I create all custom InfoObject against all fields of DataSource for DSO and InfoCube design?
2. Do I need to create and load the Master Data for all InfoObjects or I need to create or load the Master Data for only those InfoOjects which will be
used for drill down or reporting in Dashboard or InfoSpace?
3. Do I need to load the Master Data manually by creating Flat Files and using these files for Master Data loading for required objects?
4. How should I approach the designing of DSO and InfoCube?
I will appreciate your inputs in this matter.
Many thanks!
Tariq Ashraf

Thanks!

Some Master and transaction loads taking long time in R/3 extraction andBW

Hi Experts,
We have some Master and transaction loads which takes long time in source system(R/3) in BW as well in daily process chains.These loads are happening in daily basis.
In Extraction ,they takes long duration to finish.
And then BW also takes much time.....
So pls give some suggestions ,by which we can reduce this duration....
And what can we do improve these loads perfomances......
your small suggestion can improve loads performance......
thanx in advance.....

hi naveen,
go back and have a look at ur infopackage .. for the no of data packets it is picking up for each time ....
this can be done by going to scheduler in the menu and u can find the no of data packets and the size as well....
hope this works ...
snigdha >>>

Diff B/W master data and transaction data

Hi all,
What is the main Diff B/W master data and transaction data. give me some example ?
Thanks in Advance
Krish...

hi krish,
MASTER Data is the data that exists in the organization like employee details, material master, customer master, vendor master etc. These are generally created once.
Master data are distributed throughout the company, they are often not standardised and often redundant. As a result it is very costly to offer efficient customer service, keep track of supply chains and make strategic decisions. With SAP Master Data Management (SAP MDM) these important business data from across the company can be brought together, harmonised and made accessible to all staff and business partners. As a key component of SAP NetWeaver, SAP MDM ensures data integrity via all IT systems.
Regardless of the industry, companies often work with different ERP and Legacy systems. The result: the business processes are based on information about customers, partners and products which is displayed in different ways in the systems. If the data are recorded manually, there are more inconsistencies: some data sets are entered several times, others cannot be retrieved by all divisions of the company.
As corporate applications are becoming increasingly complex and produce ever greater amounts of data, the problem is intensified further. Nevertheless, your employees must work with the inconsistent data and make decisions on this basis. The lack of standardised master data easily leads to wrong decisions, which restrict efficiency and threaten customer satisfaction and profitability.
In a word: in order to save costs and ensure your companys success it is necessary to consolidate master data about customers, partners and products, make them available to all employees beyond system boundaries and use attributes valid company-wide for the purpose of description.
TRASNACTION Data - These are the business documents that you create using the master data - Purchase orders, sales orders etc
http://help.sap.com/saphelp_nw2004s/helpdata/en/9d/193e4045796913e10000000a1550b0/content.htm
Regards,
GNK.

How to start Designing Master Data and transactional Data

Can anyone tell me how to really start to design Master Data and transactional Data in Sales? What are the steps if is it possible to share? Thanks!

Hi Lei,
first step is to read all necessary document on help.sap.com about Business Content for SD. Here you can see all the parts covered directly by SAP with the Business Content.
Then you can start the GAP analysis: you check if all your requirements are fully covered by BC or not, in this second case you can start developing your own InfoObjects.
Start always by Business Content.
Take a look also at this doc:
<a href="https://websmp110.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E">https://websmp110.sap-ag.de/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E</a>
Ciao.
Riccardo.

What is master data and transactional data?

Hi abapers,
I want to know the difference between master and transactional data?. What is the significane of both master and transactional data. At what situation master data is used, and at what situation transactional is used?. Please give me example of tables using them.

Master Data:
Master data is data that remains unchanged over a period of time. It contains information that is always needed in the same way. For example, all personal attributes can be stored in various SAP standard infotypes as records with specific validity which are called Master data.
Master data are the critical nouns of a business and fall generally into four groupings: people, things, places, and concepts. Further categorizations within those groupings are called subject areas, domain areas, or entity types. For example, within people, there are customer, employee, and salesperson. Within things, there are product, part, store, and asset. Within concepts, there are things like contract, warrantee, and licenses. Finally, within places, there are office locations and geographic divisions. Some of these domain areas may be further divided. Customer may be further segmented, based on incentives and history. A company may have normal customers, as well as premiere and executive customers. Product may be further segmented by sector and industry.
Transaction data:
Data relating to the day-to-day transactions.
Reward if helpful.
Thanks.

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

HT1418 I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar. Only repeated items (birthdays, anniversaries, etc.) are visible. Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?

I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar. Only repeated items (birthdays, anniversaries, etc.) are visible. Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?
Thanks

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

The sequence of mater data and transaction loading...

Similar Messages

Maybe you are looking for