The server error encountered was: your IMAP server appears to be temporaril

The server error encountered was: your IMAP server appears to be temporarily out of service
on one mac account but not the other why?

k finally my account is receiving mail. But it was out of service for over 15 hours. And on only one of my .mac email accounts don't know how or why. Yet I even deleted my account from my mail and re-entered it but that didn't help, only time did. So strange and discerning for a paid mail account service. Great when it works. But it might be nice to have an auto forward feature for when the accounts go down so that emails may still be sent and received at one of my free email providers that has not ever had any issues. Good luck

Similar Messages

  • Apple Mail The server error encountered was: The connection to the server "

    I have had my apple mail set up for some time now, through Gmail, and it has worked fine. I recently moved into a college dorm and now my apple mail gives me this error message
    There may be a problem with the mail server or network. Check the settings for account "POP Account" or try again.
    The server error encountered was: The connection to the server "pop.gmail.com" on port 995 timed out.
    I've tried everything I could think to try, including taking the SSL off, restarting, quitting apple mail, redoing all the settings, and nothing seems to be helping me connect. I did the connectivity test and it says it's connected to the internet, it's just not getting the mail from my Gmail account. Thanks,
    Aaron

    What are the settings for both your Incoming and Outgoing servers, including port number, authentication method, and whether or not SSL is enabled for both?
    Also, it's possible your college is blocking traffiic from Google, so you might try changing the DNS Servers by going to System Preferences > Network > Configure > TCP/IP and enter these two:
    208.67.222.222
    208.67.220.220
    then click Apply Now, quit System Preferences and restart Mail and any other Internet applications you were running. Check to see if Mail still gives you problems.
    Mulder

  • Server Error Encountered

    Mail is showing an error on one of our email accounts. The error is "The server error encountered was: unable to process from lines (envelopes), change recognition modes or check for corrupted mail drop." In Mail, we have two different email accounts, but only was has this error come up. I have checked the settings and they have not changed. I contacted the person who runs the email server and he says there is no problem at his end. I have tried to add a new email account but it also comes up with the same error. What can I try? Any help is appreciated.

    Hi eckard, and a warm welcome to the forums!
    Quit Mail.
    In your Home folder. open Library folder, open Mail folder in that, look for the Envelope Index, and drag it to the Desktop.
    Then in your Home folder. open Library folder, open Caches folder in that, look for the Mail, and drag it to the Desktop.Move Envelope Index to the Desktop in...
    /Users/YourUserName/Library/Mail/Envelope Index
    Move this folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail

  • I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

    I get nothing but error messages, -
    "Your IMAP server wants to alert you to the following: 113 that mail is not available"  or  the same with:  364? 
    Now there are hundreds stacked up on my desktop.
    I cannot find the answer anywhere. You need to  give answers to how to fix these errors because when I  "search" "error code" or the number there is NOTHING. NOTHING!  Yet you give us these stupid error codes
    then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft.  How in the world can you give us ERROR codes without the explanation of what
    to do or how to fix it. You need to  add each  error code number in your "search" then explain what it is and how to fix it.  I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
    So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
    I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
    was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

    Hi,
    I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
    Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
    If you find any unusual emails that cannot be read or sent, try deleting them to try again.
    I also suggest you create a new profile to setup the IMAP account:
    http://support.microsoft.com/kb/829918/en-us
    Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
    For the steps to setup an account in Outlook 2010, please refer to:
    http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
    I hope this helps.
    Regards,
    Melon Chen
    TechNet Community Support

  • Oops... a server error occurred and your email was not saved.

    after completion of mail content when try to send the message error shows as
    "Oops... a server error occurred and your email was not saved."
    This problems are being experienced very often since installation of Firefox version 5.0

    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)

  • HT4864 I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

    I am using Entourage and followed all the instructions above and still getting IMAP Server error.  Error msg:Security failure.  Data decryption error.

  • Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

    Our company have just upgraded to iOS 6 and the majority of the users are now receiving the following error 'Cannot Get Mail – Server error. Contact your server administrator' when accessing ms exchange this never happened on iOS 5 can anyone help

    Have you tried deleting the account and re-adding it on the phone?
    What version of Exchange server are you running?

  • An error occurred validating your storage server credentials

    an error occurred validating your storage server credentials

    I found the answer of my issue was in a .NET Agent installed by NewRelic on the server. I found a connection trouble with Fiddler, then I end up figuring this out:
    This can be the result of Real User Monitoring so the first step in troubleshooting would be to disable it and see how it affects the application. The .Net Agent injects snippets of javascript into the header of pages sent to the users browser to measure the
    page load time on the user's end.
    You can disable RUM by editing newrelic.config and changing this line:
    <browserMonitoring autoInstrument="true"/>
    to this:
    <browserMonitoring autoInstrument="false"/>

  • Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

    Hi All,
    This is my first post to ms exchange forum am getting  Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
    or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
    with exchange (rest  IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
    Exchange 2013 CU6 with server 2012 Std 64Bit
    Thanks,
    Murali 

    Dear All,
    I have found the solution for above problem, the problem has occur due to PopProxy inactivity
    please find relevant exchange management shell commends below.
    1. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Inactive
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Active
    2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
    -State Active
    3. Get-ServerComponentstate -Identity <yourmailserver.com> 
    Server Component State
    yourmailserver.com ServerWideOffline Active
    yourmailserver.com HubTransport Active
    yourmailserver.com FrontendTransport Active
    yourmailserver.com Monitoring Active
    yourmailserver.com RecoveryActionsEnabled Active
    yourmailserver.com AutoDiscoverProxy Active
    yourmailserver.com ActiveSyncProxy Active
    yourmailserver.com EcpProxy Active
    yourmailserver.com EwsProxy Active
    yourmailserver.com ImapProxy Active
    yourmailserver.com OabProxy Active
    yourmailserver.com OwaProxy Active
    yourmailserver.com PopProxy Active
    yourmailserver.com PushNotificationsProxy Active
    yourmailserver.com RpsProxy Active
    yourmailserver.com RwsProxy Active
    yourmailserver.com RpcProxy Active
    yourmailserver.com UMCallRouter Active
    yourmailserver.com XropProxy Active
    yourmailserver.com HttpProxyAvailabilityGroup Active
    yourmailserver.com ForwardSyncDaemon Active
    yourmailserver.com ProvisioningRps Active
    yourmailserver.com MapiProxy Active
    yourmailserver.com EdgeTransport Active
    yourmailserver.com HighAvailability Active
    yourmailserver.com SharedCache Activ
    Replace yourmailserver.com with your server host name.
    Thanks

  • HT2305 When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    When I am trying to update my iPad 2 via syncing it with my PC, I get the following error message: "iPad software update server could not be contacted." Any ideas?

    Try rebooting your router and or cable modem. Unplug it/them for about 30 seconds and then plug back in. See if it works then. Reboot your iPad as well.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin

    Hi There,
    When i try to view info-path form item getting warning (This issue is not with all items but for some of them...)
    "The amount of data that was returned by data connection has exceeded the maximum limit that was configured by server admin............."
    Thanks in advance!!
    Regards
    Vikas Mishra
    Vikas Mishra

    HI Vikas,
    to resolve this do this from central admin
    Ensure to follow the below steps.
                                             i.    Open
    the central administration
                                            ii.    Go
    to General Application Settings
                                           iii.    InfoPath
    Form Services
                                          iv.    Configure
    InfoPath Form Services
                                           v.    Click
    on Data Connection Response Size
                                          vi.    By
    default it is 1500 kilobytes
                                         vii.    Change
    the Response Size in kilobytes (Increase the number).
    Kind Regards,
    John Naguib
    Senior Consultant
    John Naguib Blog
    John Naguib Twitter
    Please remember to mark this as answered if it helped you

  • The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.

    Hi all ,
    Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
    But im getting below error, even i removed the select query still same error is occuring.
    Error when processing your request
      What has happened?
    The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
    Note
    The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
    The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
    Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
    Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
    Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
    Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
    Method: INIT of program CL_WDR_CONTROLLER=============CP
    Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
    Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
    Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
    Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP

    Thanks Rama,
    Acutally i accidentally commented the lo_nd_student = wd_context ....etc
    this line was commented .
    i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
    my table node is student having attributes as name , city and number , all are of type strings.
    now i created one custom table zstudent having ID - char of length 10,
    name of type string
    city of type string
    num of type string
    i have inserted records
    but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
    im getting same above error.

  • Connection failed: SQLState:'01000' SQL Server Error:67 [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error:17 [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist o

    Help,
    setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine.  When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
    i get the following error:
    Connection failed:
    SQLState:'01000'
    SQL Server Error:67
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
    (Connect()).
    Connection failed:
    SQLState:'08001'
    SQL Server Error:17
    [Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
    I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled.  I can connect to the other sql server in studio manager on the new machine however, i can't go do
    the same in the old server, says:
    cannot connect to hbfsqlpro1\hbfsqlpro1
    Additonal information a network related or instance specifc error occured while establising a connection to SQL server.  The server was not found or was not accessible.  Verify that the instance name is correct and that SQL server is configured to
    allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
    the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine.  STarting to pull my hair out somewhat, i'm sure it's something really simple! 

    Hello,
    You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
    Make sure TCP/IP is enabled.
    http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
    Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
    Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Exchange 2010 RPC issue, "The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process"

    Hi All,
    this is the first time iv had to post on here on a forum since ive been doing IT but here goes.
    Server background:
    SBS 2011
    Exchange 2010 SP3 RU6
    Installed 2 years ago and has run relatively smooth since installation
    Possible Cause: a recent application that had created a virtual directory in IIS.
    Issue:
    A user recently reported an issue with Outlook Anywhere, i did an exchange connection test and reported the following error
    The RPC_S_SERVER_UNAVAILABLE error (0x6ba) was thrown by the RPC Runtime process.
    Elapsed Time: 3834 ms.
    Fixes Tried so far
    - Reg fix for ports 6001,6002,6004
    - Telnet 127.0.0.1 6001 all returns expected results
    - Disable RPC then Re-enable via the management console
    -Ran fix my network wizard which has shown an error in compenent 3 which it fixed
    Component ID #3 
    If the Fix My network wizard shows that component ID #3 is broken, this means that within IIS the RPC virtual directory settings are incorrect.
    Continuing to fix this error within the wizard will correct the RPC virtual directory to support both Basic and NTLM authentication to this virtual directory. 
    Any suggestions would be great as im running out of ideas, i have thought about rebuilding outlook anywhere but unsure of the implications on an SBS

    Hi,
    In order to check whether it is an RPC Virtual Directory issue, you can open IE and input:
    Https://mail.domain.com/RPC/RPCProxy.dll
    After inputting the credential, the expected result is a blank page. If not, I means the issue resides on the RPC VD. You can try rebuilding the RPC VD for the first try.
    Thanks,
    Simon Wu
    TechNet Community Support

  • I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library "~/Pictures/Family IIi.aplibrary". Please help, thanks

    I have three aperture libraries. But just recently two of them (old from 2011) will not open. I get the following error: There was an error opening the database for the library “~/Pictures/Family IIi.aplibrary”. Please help, thanks

    Are all three libraries under your account or are they in different accounts? Any other errros on the system?
    Start by doing the permission repair and library repair steps in Aperture 3: Troubleshooting Basics

Maybe you are looking for

  • Error 500--Internal Server Error  while login to OIM11gr2 admin console

    could you help me how to resolve this error I have installed and configured OIAM 11gr2(11.1.2.0.0)->SOA 11.1.1.6.0 on oracle linux 6.4 every thing goes good but got a problem while login to admin console(Admin console:: \\localhost:14000\sysadmin) it

  • The question about the HA installation on ECC6.0

    Hi Experts, We are about to implement a project with HA environment on the ECC6.0 in the near future, which is just about the ABAP stack. After reading the Installating Guide, I stil have several questions related to the procedures of HA installation

  • Adobe cc wants me to enter a serial number for my student cc 2014 but i can't enter the license site...

    hi folks, i am a student from berlin, germany. i chose the cc 2014 student subscription for 19,99€ monthly ( mac OSX 10.9.3 ). i had an adobe ID before and i continue using it now. i installed some programs from the CC2014. after that i wanted to try

  • Netbeans applet

    the applet i've created isnt working in console mode.... giving error dat-"package org.jdesktop.layout" does not exist... can ne1 help me ? is it becoz dat this class is not included in java folder in progam files ?

  • Reverse the document

    hi, i posted fixed asset values and accumulated deprciation values through OASV tcode,now i want to reverse some documents.but it is not allowing in FB08 tcode.could u tell me  what is the process to reverse those documents.is there any other tcode.