The server not responding
Frequently, the server not responding at the logins of the users. It's not hanging but not responding. All the Oracle services is running and the Event Viewer not record any error or warning. I need to know if there are someone Oracle log where I can check this. Thanks.
That could be a hardware problem with the WiFi antenna. Contact Apple Support for assistance: Contact Us
Similar Messages
-
HT4907 iCloud server not responding
I have the message "Back to My Mac isn't working properly because the server isn't responding". I tryed to turn off Mack to My Mac and I tryed again but nothing changed?
Can somebody help me what to do?I was having the same problem but found a solution that worked for me.
1. From the iCloud System Preferences pane, uncheck the Back to My Mac checkbox to turn it off.
2. Open the Keychain Access app (in Applications/Utilities).
3. Click the "System" keychain (You'll see keychains near the upper left of the app window).
4. Make sure "All Items" is selected in the "Category" box below.
5. In the results showing to the right, look for any key whose "Kind" is "Back to My Mac key."
6. Delete the key(s), authenticating with your password to do so.
7. Back in the iCloud System Preferences pane, re-check the Back to My Mac box.
At this point, Back to My Mac started and the "server not responding" message did not appear.
I'd tried unchecking and re-checking several times before to no avail. I hope it works for everyone.
Maybe the keys we had were tied to MobileMe and became invalid when MobileMe shut down? -
my ipad will not load any pages an after about 10 mins comes up with safari could not open the page because the server stopped responding but iam conected to wifi please help as i have been trying for 2 days now and is doing my head in
Does the iPod connect to other networks OK?
Do other devices now connect and work OK?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!
Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.
-
my problem is my iphone 4s is connected to wi-fi with full signal(3 bars) strength but freezes when browsing and says
"Cannot Open Page"
"Safari could not open page because the server stopped responding"
I already reset the iphone to its factory settings and erase all contents but still the browsing speed freezes or not searching at all. Sometimes it will work and fast but then the problem uccors every now and then. Iv'e been using iphone 4 for two years and I still have it and works fine compared to this IPHONE 4S.Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
When I turn on my Ipad and click on Safari it says Safari could not open the page because the server stopped responding.but I can get on internet with Google Chrome. What is the problem and how can I repair it?
Found the answer in the more like this panel and now working. Thanks.
But have 3 updates waiting in Apps but it is taking ages to update them and cannot get onto Apps by clicking Apps on the desktop.screen. -
Safari could not open page because the server stopped responding
"Could Not Open Page.... Safari could not open page because the server stopped responding"
....but it could worked just fine for the first 2 weeks of iPhone4 ownership.
WiFi network at home, working fine with MacBook, visiting friends' phones, my new iPhone4 - no problems. Had to power down the modem & router very briefly last night. Rebooted, MacBook connected fine, iPhone doesn't - it goes through the motions - shows all signs of full connection, full signal, password accepted etc etc - but web pages will not open, displaying after 30 secs the warning message above.
Tried at work on another wireless network - same response.
Have gone through all the FAQs, reset network settings, forgotten network etc - still nothing.
Anyone experienced the same and fixed it?
cheersI'm having a very similar problem, but it's with my 3G connection, not with wifi. The display tells me there is 3G connectivity, and I get the loading symbol, but pages stop loading a few seconds after I try to open them, and some time later I get the "server stopped responding" message. That happens with addresses I know are working, such as Google. Some times, restarting the iPhone or the internet connection (by switching plane mode on and off) solves the issue, but it has been happening often these days.
-
ACC Setup Error - Remote Server not Responding in the Proper Manner - Windows 7 Pro
Hello -
I was able to install the CC upgrades to all my software on my laptop without issue. Whenever I try to upgrade them on my desktop I recieve the attached error. I am running Windows 7 Professional. My guess this is being caused my my company's firewall however my IT director claims he set me up to bypass the firewall when trying to install this.
Thank you for your help.Hi Mike603,
Please refer to the following help document on error " Remote Server not responding".
http://helpx.adobe.com/creative-suite/kb/remote-server-responding-installing-aam.html
Hope this helps.
Please let me know in case of any problem.
Regards,
Sumit Singh -
When I search for stuff on the internet it says safari could not open the page because the server stopped responding and non of my games work either. What do I do to fix this?
Settings → scroll down to Safari → in Safari settings, I selected both Clear History and Clear Cookies and Data.
IF that does not work -
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Finally - if problem still present -
Go to Settings>General>Reset
Reset the network settings - you will need to add the password of your home WiFi in your phone once more
The device should turn itself off & back on then go into Settings>Wifi and join your network -
My iPad2 will not connect to the internet, "Safari could not open the page because the server stopped responding". I've run the AirPort utility and it shows that I'm connected to my Wi-Fi. The connection works with both my iMac and iPhone. I'm concerned that the problem is with hardware rather than software.
Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo -
Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue
Marc-
The Safari message is probably telling the truth. Is the problem repeatable at several websites, or is it only with a particular one? If all websites, you may have trouble with your internet connection downloading large amounts of data. Mail messages are relatively small unless there are attachments or embedded images.
Fred -
I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support. The advisor took over my screen and we check that my laptop was synchronising with I phots and it was. The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...
Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.
-
Safari could not open the page on my new ipad mini's because the server stopped responding- new ipad mini's (2 from separate places) are not working with At & T router but computers work fine. Yesterday I got it to work. Weird. Can you please help me. I've tried everything. Thanks ya'll!
Hello SavannahSweetie,
I was looking into the issue you are desribing, and found a great article for troubleshooting wifi connections with iOS devices. It's called iOS: Troubleshooting Wi-Fi networks and connections and can be found here: http://support.apple.com/kb/ts1398.
Start with this section, and work your way down if needed.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
All the best,
Sterling -
I cannot acces Safari (for the past three days) A message shows 'Safari could not open the page because the server stopped responding. How can I rectify this?
Well, you are accessing Safari. It's just that there's a page it's trying to access on the web, one that you last used, and that website is not available. When looking at the dead page in Safari, tap the lower right icon to shrink down the page and then tap the "x" to get rid of it. You can then try going to another site.
-
I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU
Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo
Maybe you are looking for
-
Outbound Delivery Handling Unit HU material box pallet
Business requirement. To create a delivery based on a sales order using a function module. To do this, users have an AbapWebdynpro application to collect data, Handling units for boxes and handling units for pallets are creates as the user packs his
-
Variable entry from Navigational attribute
Hi, I would like to let the user of a web query enter a value for a navigational attribute of a characteristic in the variable screen. How do I create variables based on nav attributes? Example: The report shows 0MATERIAL with key figures. The user s
-
Why Can I Not Change My Menus?
I'm trying to alter my menus in dreeamweaver using the menus.xml file as I was directed. I can change it, rename it, delete it, break it, everything. Nothing does ANYTHING to dreamweaver. Even with system restarts. I've tried renaming the file to for
-
Hello experts i am looking for a way to get some reports such as shown in st03 transaction; i mean that i need for example to produce (scheduling an automatic job or something like this) a table with the st03 data and transfer it on an internal web
-
Syncing Logic and multitrack tape using smpte/mtc
Hi, Has anyone managed to sync Logic to multitrack tape using smpte/mtc without major drift ? If you've tried this, let me know your experience. Many thanks.