The Server's SSL certificate has expired

Hi,
Today morning I accessed my mails with out any problems. After some time suddenly my outlook was disconnected and getting the message "The Server's SSL certificate has expired".Can any one help me out of this?
Thanks,
Prasad K

Check if you have accidentally set your system date not to current.
Edited by: user10788046 on Oct 22, 2010 8:16 PM

Similar Messages

Message: Your Server's SSL certificate has expired. - Can no more login

Hi,
Since yesterday I can no more login into beehiveOnline via OBEE. Every time I try it the extension goes offline and tells me in a window that "Your Server's SSL certificate has expired.". If I try to relogin it takes some seconds but the window and message comes up again and again.
It was working perfectly during the previous weeks, no issues at all. What do I have to do to get it solved?
Thanks
Volker

Hello,
I've set up OBEE for BeehiveOnLine usage today, without any issue (Monday 28 of June)
May you retry please?
Yesterday - Sunday - the system might be under maintenance.
Thanks
Fred

Your Push Certificate has expired

Hi
I created two push certificates both set to expire on Sep 5 2013 however when trying to send a notification I get the meesage "Your push certificate has expired. To upload a valid certificate, rebuild your app in Viewer Builder and retry sending the notification."
Any ideas?
Thanks.

Hi,
I found that the process was slightly different for me than what was described in the guide. On my mac mini running lion it didn't put the certificate under the private key so I needed to select both the certificate and the private key and then export to p12.
Hopefully this will help.

After updating SSL Certificate, iCal is saying the certificate has expired.

Having a problam with iCal after updating our SSL certificate. The certificate expired recently so we renewed it with godaddy and followed the steps on their site to update it on our server. Everything seemed to have gone fine, under server admin in the certificates section it shows the certificate is valid through 2015 and I have Mail and iCal both set to use that certificate (it is the only one you can select.). E-mail works fine but when you connect with iCal it says there is a problem with the certificate. When I click details it shows the certificate has expired and shows the esperation date of the old certificate. I have tried to delete and import the new certificate again but still have the same issue. It seems that some how iCal is still holding the old certificate. Does anyone know what is going on? Did I make a mistake somewhere?

Hi,
According to your post, I understand that client face an problem “The linked image cannot be displayed. The file may have been moved, renamed, or deleted. Verify that the link points to the correct file and location” after change SSL certificate.
If I misunderstand your concern, please do not hesitate to let me know.
Do you see the "page cannot be displayed" error only from your DC server or also from a Windows 7 client machine? What browser do you use and what version?
Please run “certutil –store” command from a command to verify that the certificate is correctly installed in the certificate store. Also run “certutil -store my” to check the certificate from CA.
If the certificate is already installed, please refer to below link to check the value of Cache in registry:
https://support.microsoft.com/en-us/kb/2753594
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

500Internal Server Error The Web Dynpro application PageBuilder has expired

hi all ,
i am using public url domain to access my portal through internet . i have done a reverse proxy using apache . from my server url i am able to get every page . from public url i am not able to view my webdynpro applications . its showing the following error
500 Internal Server Error
SAP J2EE Engine/7.01
The Web Dynpro application 'PageBuilder' has expired. Restart the application. Choose 'Refresh' in the iView tray or use the browser 'Refresh' button to restart the iView
Details: No details available
i got this log file in the portal
Full Message Text
Session unknown: Request with URI=/webdynpro/dispatcher/sap.com/pb/PageBuilder was sent to unknown session. Either request with wrong session parameters was sent, or session has expired before Wed Oct 20 21:47:46 IST 2010. Current request parameters={sap-ext-sid=DL7cHVE6DiKdbE9gwYkSdg5A6q8C_OKOzgxi0HoLa2iw, sap-wd-cltwndid=WID1287644121668, sap-wd-norefresh=X, sap-ep-version=7.0104.20090422102234.0000}. Is termination request=false. Request was sent from host with IP=172.31.11.95/name=172.31.11.95. Hint: see SAP note 842635 for more details on session expiration. RID=a16ac995dcdf11dfb3e70021281821ee
[EXCEPTION]
com.sap.tc.webdynpro.clientserver.session.SessionExpiredLongJumpException: Session has expired (current request: follow-up request). Please restart the application. Hint: HttpSession seems to be expired due to user inactivity or application is called with wrong URL parameter (sap-wd-norefresh=X).
at com.sap.tc.webdynpro.clientserver.session.RequestManager.findClientSession(RequestManager.java:258)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:146)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
can anybody helpme in this issue

Hello,
Please see this post:
The Web Dynpro application 'PageBuilder' has expired
I think the problem is solved in this post.
Regards.

The signer certificate has expired.

When I tried to sign the applet jar file, I am getting the following warning/error.
The signer certificate has expired.Can any one tell how to renew the certificate?
Thanks.

>
Can any one tell how to renew the certificate?>That depends on the answer to.. Where/how did you get the certificate in the first place?

The Web Dynpro application 'PageBuilder' has expired

Hi Alll,
We are implementing ESS/MSS and the Portal was working fine.
We set it up for SSL/https and it was working just fine. However when we call it from reverse proxy server the web dynro applications through the following error:
The Web Dynpro application 'PageBuilder' has expired. Restart the application. Choose 'Refresh' in the iView tray or use the browser 'Refresh' button to restart the iView
Details: No details available
When I tested this with a transaction iview they work just. Also when tested directly from Portal they work fine.
Can anyone assist on this please?
Thanks,
Mike

Hello Mike,
After a user is logged in and requested an ESS/MSS application. The pagebuilder service is requested to built the page.
When the user is still logged in but is not working with this application the pagebuilder receives a timeout after a while and the session is expired. The pagebuilder has sometimes the status stopped, you can see this in the Netweaver Administrator. (Search for the pb in the application area)
If an other user is requesting an application the pb service is started again and the page built again.
If you want to get rid of the warning you could set the "timeout" parameter to a higher value in the configtool.
Kind regards,
Marcel

Outlook 2013 Clients certificate has expired warning or not yet valid

Hello,
We had been through a migration from exchange 2010 to 2013 in the last year but have had an ongoing issue with
some Outlook clients getting a certificate warning after they launch the client. Not all Outlook clients experience this. We've just recently uninstalled exchange from our 2010 servers and shut them
down. What we have left are two 2013 servers in a DAG. The certificate these Outlook clients are complaining about had expired in 2012. Here is the warning they are getting:
"Certificate has expired warning or not yet valid"
I've been through numerous threads/sites regarding this error but it always ends up that there was an expired cert hanging out somewhere. I cannot seem to find an expired cert anywhere...
I've ran the 'Get-ExchangeCertificate | fl' cmdlet and I see 7 certs listed, none of which match the thumbprint on the Cert Warning on Outlook.
When I check the registry of the Exchange servers here: HKLM>Software>Microsoft>SystemCertificates>My>Certificates
I can see 7 certificate entries listed there and the thumbprint matches those of the cmdlet ran from
EMS.
OWA shows the correct cert expiring in 2015 and Outlook clients are pointed to the 2013 servers. We do have a load balancer that AutoDiscover, OWA, SMTP are going through.
It seems like some of these Outlook clients are still looking at the decommissioned 2010 Exchange servers' old certificate. Any ideas on how I can get outlook to point to the new certificate/server?
Thanks.
Rory
Rory Schmitz

Hi Rory,
If possible, could you please post the Get-ExchangeCertificate | FL results about the certificate which is assigned with IIS service here?
If the issue only happens for some users instead of all users, please create a new Outlook profile for the problematic user to check whether the issue persists. Please make sure the certificate name which is reported as expired or not valid is included
in the IIS service certificate in your Exchange 2013.
In Exchange server side, please restart IIS service by running IISReset /noforce from a command prompt window to have a try.
Regards,
Winnie Liang
TechNet Community Support

There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

Hello,
I have an issue with connecting client SB1H on Windows, the scenario is as follows:
1.- Server:
     Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
     NDB and Server are review 69 SP06
2.- Client:
     Windows 8 Pro Virtual Machine on Microsoft Hyper-V
     SB1H PL 11 version 32bits
     SAP HANA Studio version 1.0.60
When I run SB1H the following message appears:
There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
Any idea what could be the solution?

Hi,
Please check SAP notes:
   1993392 - Server components setup wizard: New default values for certificates and single sign-on option
1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
Thanks & Regards,
Nagarajan

The Web Dynpro Application 'XssMenu' has expired

Hi,
we implement an ESS Scenario, with One Enterprise Portal 6.0 SP17, a mySAP ECC 5.0 System with ERP2004 and a seperate server with a java stack, because our customer don´t want to install and use a java stack on their HR/ERP systems. They want to minimize the performance.
After some configurations, we get the startpage for ESS. If I click on a service like travel management it has no effect. If I click the second time, I got an error "500 Internal Server Error" with the message
The Web Dynpro Application 'XssMenu' has expired. Please restart the application either with the refresh button or click the following link XssMenu.
Same error comes, if I choose travel management in the second navigation level and click the service. And same message on every service.
Now I tried anotehr way. I call the ess startpage directly on the external java stack. And here´s no problem. All WebDynpro-Services works fine.
Can anyone help me, why the WebDynpro Service doesn´t work in the Portal?
Best regards
Christian

We had exactly the same problem. We had multiple java servers and our switch was not retaining stickiness. So it would send the user to a different java server which hadn't got any session data for that user.
If this could be it, get something like httplook to do a trace of what is happening. We saw it switching java servers.
If you do not have multiple servers it could be switches chopping out cookies, causing the same issue.
Paul

The Web Dynpro Application 'Explorer' has expired

hi,
when I am trying to open the deployed content in the
Content Administrator in the sap portal I am getting the following error
"500   Internal Server Error The Web Dynpro Application 'Explorer' has expired. Restart the application using the Refresh button or via the following link Explorer.
Details:
No details available"
what can I do?
I have read here at sdn that I should increase the expiration time but where can I do this?

Hi Thorsten,
Close your explorer, open a new explorer and run the application from the new browser.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b52de690-0201-0010-c5a6-b4bde0a12e44
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_ep_sys/~form/handler">SAP Note Number: 519191</a>
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_fes/~form/handler">SAP Note Number: 856741</a>
Regards,
Mithu

The Web Dynpro Application 'PcrApplication' has expired.

Hi,
I am getting below error:-
500 Internal Server Error:
The Web Dynpro Application 'PcrApplication' has expired. Please restart the application either with the refresh button or click the following link PcrApplication.
Can anyone help me on this.
Best regards
Ali

Hi Rali,
I think you have not been using this application from long time. So the Portal session time must have expired. Well, Let us know if the problem persist even after RESTART of the browser.
Regards
<i><b>Raja Sekhar</b></i>

The Web Dynpro application 'UWL' has expired

Hi ALL,
We are using Enterprise portal 7.0. and backend SRM server
When the user login into portal it will take him to the UWL page
in that the user click for any "Approve shopping cart" the error message showing
" The web dynpro application *'UWL' has expired. restart the application. choose 'refresh' in the iview tray or use the*
*browser 'refresh' button to restart the iview"*
user not getting the error message every time. error coming occasionally
we suggest the user to clear the cookies and restart the browser and relogin.
but some times it works some times not
Can any one know the exact problem (any parameters has to be change or any other solution)?
Regards,
Abdul Razzaq
SAP NW.BASIS Consultant

Dear Abdul ,
Hope you are doing good.
We have seen similar cases of WD Session Expired error message when the jsessionid cookie issued by the server with the initial requests was not returned from the client with subsequent requets to the server. The only way to ascertain whether this is the case in your system will be by checking the HTTP watch trace (note 1558903 - How To Trace a Portal Scenario Using HttpWatch).
As the jsessionid cookie is used for session management, when it is missing from the request headers the correct session could not be retrieved and as result new session will be created for that user. Set the parameter JSESSIONID.CookieDomain to "NONE" as mentioned in the sap note: 791765 and see if the issue persists. This configuration should be accessible in
Config Tool -> expand the tree "cluster-data" -> "Global Server Configuration" -> "services" -> "servlet_jsp" -> Go to "Global
Properties". Do make the changes, save the customization and then restart the complete SAP server (not just the JAVA server nodes).
Kindly go through the note completely.
Also make sure that the SystemCookiesDataProtection and SystemCookieHTTPProtection is set in the HTTP Provider Service on
the server nodes.
Do make the changes,save the customization and then restart the complete SAP server.
Thank you and have a nice day :).
Kind Regards,
Hemanth
SAP AGS

The Web Dynpro Application 'Appl' has expired.

Hallo altogether,
i am a newbie in this area.
I maked a simple Web Dynpro with two views,
only for navigation test
and without data transport.
Everybody view consist of two elements:
one TXV_Field and one BTN_Element.
V_ONE:
TXV_ONE with a text "View one",
BTN_GO + action GO,
OP_TO_TWO,
IP_FROM_TWO
V_TWO:
TXV_TWO with a text "View two",
BTN_BACK + action BACK,
OP_TO_ONE
IP_FROM_ONE.
There are two links between views builds.
I cann my application APPL deploy without problem and without error messages.
I see my V_ONE im browser.
If i click the button BTN_GO ==>
The Web Dynpro Application 'Appl' has expired.
I controlled the file default.properties
the timeout = 3600.
what cann i do????
Thank,
vmath.

1. check ur server configuration windw> preference->j2ee-engine.
I have DeveloperStudio local on my PC.
There are following settings for j2ee-engine:
SAP J2EE-engine is installed on local host
System name: J2E
J2EE Instance: 0
SCS Instance: 1
BEN_1\sapmnt\J2E\SYS\profile\J2E_JC00_ben_1
BEN_1\sapmnt\J2E\SYS\profile\J2E_SCS01_ben_1
vmath

The Web Dynpro Application 'WebUI' has expired,

Hi experts,
We are using Netweaver 7.01 portal , I have done some change to the portal for configuring idle timeout .
Now currently we are not using that in portal ,so i removed all the configurations
When i am using the all the other portal applications it is working fine, but when i am using webdynpro java applications it is giving the following error in a couple of mins (less then 5 mins)
The Web Dynpro Application 'WebUI' has expired. Restart the application using the Refresh button or via the following link WebUI.
Please let me know how to resolve this is issue .
Thanks & Regards,
Pavan Marla

Hi,
Check this link and below settings
DefaultExpirationTime
=================
http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/content.htm
Check the time for session timeout by the following steps:
1. Open the visual admin tool.
2. Navigate to Server -> Services -> Web Container -> Properties.
3. Check the value of the property 'SessionTimeout'.
Regards,
Nivas209
Edited by: Nivas209 on Feb 8, 2012 12:50 PM
Edited by: Nivas209 on Feb 8, 2012 12:51 PM
Edited by: Nivas209 on Feb 8, 2012 1:03 PM
Edited by: Nivas209 on Feb 8, 2012 1:06 PM

The Server's SSL certificate has expired

Similar Messages

Maybe you are looking for