The server (UCM server name) at IDC Security /oracleUCM/idcplg requires a username and passowrd.
Hi ,
I am getting the prompt asking for username and passoword whenever trying to login to UCM. Please find the details as given below. I am using UCM 10gR3 with Apache server and database is oracle 11g.
The server at IDC Security /oracleUCM/idcplg requires a username and passowrd.
warning: This server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection)
Can anyone please help me out to resolve this issue.
Thanks,
Prangya
Hi,
It’s not leading to UCM Server Login page. I supposed to give the user name and password in the UCM Server Login page but before that its asking for the username and password and even after giving the user name and password also it’s not taking. It keeps on asking for the user name and password. Can you please help me out on this.
Thanks.
Similar Messages
-
The server at Mac OS X Server Web Services requires a username and password
I am running SL Server 10.6.2, wiki works but when a person clicks an attached file in a wiki and then selects "open" they get a login popup with the notification The server at Mac OS X Server Web Services requires a username and password. It doesn't matter what they put into the login/pass it comes back. If they hit cancel then the document opens. If they click save then it saves with no issue. I can type in the admin login/pass of the server and it works. Does this mean the security settings to the location of the files is wrong? Any help is greatly appreciated!
By the way they are using Internet Explorer 7 when opening these documents.
-
Hello How do I set up Firefox 8.0 so that It will Ask me if I want to save a Password for a website. At present I don't get an option every time I go into a website that I know is secure I have to enter username and password. I have been though tools etc.
Thank you any help would be help full as every time I log into Face Book for example I have to provide all the Information and this is a pain
Cheers AlexThe website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/ -
In my company, I used FF for sometime now.
I had some problem in the beginning, but using the proxy IP and Domain\Username + Password I was able to navigate.
Ever since I tried FF4.x and FF5.x... I started to receive the following message:
The proxy moz-proxy://172.20.5.250:8080 is requesting a username and password. The site says: "moz-proxy://172.20.5.250:8080"
Even after inserting the Domain\Username and the Password I keep receiving the same error. In FF3.xx I was able to use the proxy.
Don't know what to do any more there are several pages that have this problem.
http://pplware.sapo.pt/
http://www.facebook.com
http://www.netbooklive.com/
http://daxspeculator.blogspot.com/
Some... don't have any problem:
http://batracer.com
http://www.youtube.com
Even when I try to see the extensions I get this error. This is so weird!!!
For now... I have switched to Chrome, every new version of FF that is released I try it to see if the problem is gone. But, with no luck until now! :(I did have this problem with proxy moz-proxy prompt for username and password. In my case it was for websites hosted not on the internet but on the local corporate intranet. I solved my problem by doing the following action:
Tools -> Options -> Advanced -> Network -> Settings: add the local website to the "No Proxy For:" field.
I hope this will help some of you out there that have manually configured their proxy settings. Also a tip if you need to turn on and off proxy settings I recommend using "Quick Proxy" add-on. -
Why am I getting this message and how can I fix it? I can't access any websites. What username and password an I supposed to put? I'm dumb with this stuff so please provide a simple explanation? Thanks.
Do you mean the password of the wifi network i'm connected to?
-
How do I connect to an SMTP server that requires a username and password?
Hi,
I am currently working on a project for university which requires me to send and receive email. I was until this week able to send mail no problem, but now the SMTP server has been upgraded so that each time a mail is sent it requires the username and password.
Ideally the connection should be made using TLS/SSL, and not use the Authenticator method. I want to pass the username and password directly if possible.
I've been trying to use the following but have been getting handshake, and other exceptions:
SMTPSSLTransport smtpSSLtransport = new SMTPSSLTransport(session,
new URLName("smtp", smtpHost, port, null-File,
"USERNAME", "PASSWORD"));
smtpSSLtransport.setStartTLS(true);
smtpSSLtransport.connect(new Socket(smtpHost, port));
smtpSSLtransport.sendMessage(smtpMessage, message.getAllRecipients());
smtpSSLtransport.close();Can anyone correct this piece of code for me or point me in the right direction of what classes and methods I should be using?
Many thanks in advance,
GordonI always wonder what misleads people to do things this way.
Was there some example you saw that suggested that instantiating
an SMTPSSLTransport was the correct approach? I hope not.
See the smtpsend.java demo program for how to use SMTP
authentication. If you need to use SSL, see the SSLNOTES.txt
file for hints on using the "smtps" protocol. smtpsend.java also
illustrates use of SSL, but you'll need to fix a bug in it to use the
correct property names ("mail.smtps.auth", etc.). -
Connecting printer to a secure wireless network which requires both username and password
I have the hp photosmart 6510. I have it in my college dorm, which has a secure network with requires both a user name and password. I need help setting it up as I can't seem to get the printer to enter a username and password. I know the printer works and I know that my computer can print wirelessly with the printer. My college game me this setup configuration.
Configuration Item Preferred Value Optional Value (less preferred)
Network Name of SSID umd-secure
802.1x Operating Mode
(note: 802.11b is no longer supported) Infrastructure or Network (not ad hoc)
Security Mode Enterprise (not Personal)
Network Authentication WPA2 WPA-less prefered
Data Encryption CCMP or AES (TKIP-less prefered)
Roaming Identity or Outer Identity anonymous
Authentication Type or Outer Authentication TTLS (PEAP-Less prefered)
Authentication Protocol or Inner Authentication PAP (MS-CHAPv2-less prefered)
Validate Server Certificate or Verify Server Name Yes
Certificate Issuer or Trusted Root CA Thawte Premium Server CA (Any Trusted CA -less prefered)
Server Name or Certificate Name wireless.umd.edu
Server Name must match YesHi @hatyai ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else -
WSN 1.2 NI 9792 Security: Initial Setup? Default Username and Password?
Hello,
With NI WSN 1.1, using a 9792, I can click the Set Permissions button and if none had been set it would simply ask me for a new administrator password. Now, with NI WSN 1.2, when I click on the Set Permissions button it takes me to the 9792's web interface and says "Either no one is logged in or you do not have permissions to view/edit users, groups, and permissions." When I click the Login button, a box pops up and asks me for both a username and password. I scoured the release notes, help files, and the internet and it seems there is NO documentation on how to setup the very first username/password combination nor does it state what default username/password combination there might be. I also tried a brand new 9792 straight out of the box and loaded 1.2 on it and it has the same issue. Is there something obvious that I'm missing? How does someone initially set up security on the 9792?
Solved!
Go to Solution.Hello Garrett,
Thanks for your post!
It looks like you are needing information on how to find out the log in information of your 9792. When using NI-WSN 1.1 we allowed users to set the initial password and this is still the case for the 9791. The 9792 is a NI-WSN node gateway as well as a LabVIEW Real Time target. Its default log in information can either be found in a Knowledge Base (KB) the LabVIEW help or MAX help. Are you using LabVIEW 2009 SP1 or LabVIEW 2010?
The default user name and password is the following:
username: admin
password: <blank>
KB
Default Username and Password to Log into a Real-Time Controller
http://digital.ni.com/public.nsf/allkb/14D8257A7724BE85862577F90071B73F
LabVIEW Help
Start >> All Programs >> National Instruments >> LabVIEW xx >> LabVIEW help
then go to .. Fundamentasl >> Working with Prjects and Targets >> How-To >> Monitoring and Configuring a Remote Device from a Web Browser
MAX Help
Open MAX >> Help >> MAX Help (can also press F1 in MAX if open)
then go to .. MAX Remote Systems Help >> LabVIEW Real-Time Target Configuration >> Device Configuration >> Logging into your System
The LabVIEW help link above is called out in the 9792 getting started guide under Related Documentation that directs you to the LabVIEW help.
NI Wireless Sensor Network Getting Started Guide
http://www.ni.com/pdf/manuals/372781c.pdf
Is this the information that you were looking for? Please indicate if there is anything else we can do.
Cheers
Corby
WSN R & D PSE -
I have the interactive student mathematics CD for the Cambridge IGCSE Mathematics (0607) Extended from Haese & Harris Publications that requires Adobe Reader and includes a 'Self-help Tutor". I can open all the features using Adobe Reader except the Self-Tutor. I get a pop-up message saying that: I require an app to open "26Unitary Method.app". I can find no mention of this app online so can someone please help me?
Thank you.Thank you for the prompt reply. The CD says that it needs Adobe Reader (and it does read the 'Text book'), but it is not opening the interactive elements. Great!
I am doing as you suggest and contacting Haese directly. Again, many thanks. -
Here's an example of what happens when I cancel the username and password request:
ERROR: Cache Access Denied
Sorry, you are not currently allowed to request:
http://cben.net/?
from this cache because your username and password are incorrect or your user group does not have permission to web browse. Please check your username and password. They are case sensitive so make sure Caps Lock is not on.
This happens 100% of the time.I have the same problem. It ask for all elements that proxt detects ("NetworkError: 407 Proxy Authentication Required").
Solution "No proxy" not works because i aslo require internet.
I have version 10.0.2 on windwos XP, and this happens to me since I update it. On chrome and ie works without prompt.
I upload and example, this page calls facebooks elements (i can't acces facebook) and others, for each element prompt proxy is shown. -
This server 192.2.2.1 at XDB requires a username and password
Hi all,
I am installing Apex 4.2 in Oracle 10.2.0.4 on SLES 11
But I got the above error. :(
I tried to google the error but to no avail. I see lots of similar error since 5 years ago and it seems there is no solution yet. sad sad sad.
Is Apex 4.2 not supported in 10gR2?
Please help.....
Thanks a lot,
zxy
Edited by: yxes2013 on 28.2.2013 1:20We also had issues with Apex 4.2 and XDB
This from our WIKI:-
When XDB is used for Apex, the ANONYMOUS user must be configured for file access.
as sysdba run the following:
If this block has not been run, then when accessing Apex, one is channged for XDB credentials ("server said: XDB")
SET SERVEROUTPUT ON
DECLARE
l_configxml XMLTYPE;
l_value VARCHAR2 (5) := 'true'; -- (true/false)
BEGIN
l_configxml := DBMS_XDB.cfg_get ();
IF l_configxml.
EXISTSNODE (
'/xdbconfig/sysconfig/protocolconfig/httpconfig/allow-repository-anonymous-access') =
0
THEN
-- Add missing element.
SELECT INSERTCHILDXML (
l_configxml,
'/xdbconfig/sysconfig/protocolconfig/httpconfig',
'allow-repository-anonymous-access',
XMLType (
'<allow-repository-anonymous-access xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd">'
|| l_value
|| '</allow-repository-anonymous-access>'),
'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd"')
INTO l_configxml
FROM DUAL;
DBMS_OUTPUT.put_line ('Element inserted.');
ELSE
-- Update existing element.
SELECT UPDATEXML (
DBMS_XDB.cfg_get (),
'/xdbconfig/sysconfig/protocolconfig/httpconfig/allow-repository-anonymous-access/text()',
l_value,
'xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd"')
INTO l_configxml
FROM DUAL;
DBMS_OUTPUT.put_line ('Element updated.');
END IF;
DBMS_XDB.cfg_update (l_configxml);
DBMS_XDB.cfg_refresh;
END;
/ -
file://localhost/Users/georgegalli/OFFICE/Time%20sheets/September%202013%20copy. numbers
I hope I'm asking this the right way......
Sheet "31 Day diary" is linked to sheet "Caramainco". So, no matter what job we are on, the days are always recorded to the Caramanico sheet.
Is there a formula that will recognize the job name in column B sheet 1 and link to a sheet below of the same name?This is a part of the linked sheet from one job.....( Caramanico ) notice where i had to delete days where we weren't there.
Date
George
Aaron
Mike
Wed, Aug 28, 2013
0.00
0.00
0.00
Thu, Aug 29, 2013
0.50
1.00
0.00
Fri, Aug 30, 2013
0.50
1.00
0.00
Sat, Aug 31, 2013
0.00
0.00
0.00
Sun, Sep 1, 2013
0.00
0.00
0.00
Mon, Sep 2, 2013
0.00
0.50
0.50
Tue, Sep 3, 2013
0.00
0
0
Wed, Sep 4, 2013
0.00
0
0
Thu, Sep 5, 2013
0.00
0.00
0.00
Fri, Sep 6, 2013
0.00
0.50
0.00
Sat, Sep 7, 2013
0.00
0.50
0.00
Sun, Sep 8, 2013
0.00
0.00
0.00
Mon, Sep 9, 2013
0.50
1.00
0.00
Tue, Sep 10, 2013
0.00
0.00
0.00
Wed, Sep 11, 2013
0.00
1.00
0.00
Thu, Sep 12, 2013
1.00
1.00
1.00
Fri, Sep 13, 2013
1.00
1.00
1.00
Sat, Sep 14, 2013
0.50
0.00
0.00
Sun, Sep 15, 2013
0.00
0.00
0.00
Mon, Sep 16, 2013
0.50
1.00
1.00
Tue, Sep 17, 2013
0.00
0.00
0.00
Wed, Sep 18, 2013
0.00
0.00
0.00
Thu, Sep 19, 2013
0.50
0.00
0.00
Fri, Sep 20, 2013
0
0
0
Sat, Sep 21, 2013
0
0
0
Sun, Sep 22, 2013
0
0
0
Mon, Sep 23, 2013
0
0
0
Tue, Sep 24, 2013
1.50
1.50
1.50
Wed, Sep 25, 2013
0.00
0.00
0.00
Thu, Sep 26, 2013
1.00
1.00
1.00
Fri, Sep 27, 2013
1.00
1.00
1.00
Sat, Sep 28, 2013
1.00
0.00
0.00
Sun, Sep 29, 2013
0.50
0.00
0.00
Mon, Sep 30, 2013
1.50
0.00
1.50
Tue, Oct 1, 2013
1.00
1.00
1.00
Wed, Oct 2, 2013
0.50
0.50
0.00
Thu, Oct 3, 2013
1.00
1.00
1.00
Fri, Oct 4, 2013
Sat, Oct 5, 2013
0.00
0.00
0.00
Sun, Oct 6, 2013
0.00
0.00
0.00
Mon, Oct 7, 2013
0.00
0.5
0.00
Tue, Oct 8, 2013
0.00
0.00
0.00
Wed, Oct 9, 2013
0.00
0.00
0.00
Thu, Oct 10, 2013
0.00
0.00
0.00
Fri, Oct 11, 2013
0.00
0.00
0.00
Sat, Oct 12, 2013
0.00
0.00
0.00
Sun, Oct 13, 2013
0.00 -
I need to HP SimplePass Identity protection. This use of fingerprint technology allows sign in to websites by swipe of fingerprint and supports multiple users. Firefox supported that technology at one time but dropped support. Will the new version support it again? I quit using Firefox when the support ended and will not use it again until that functionality is restored.
HP Simplepass never stopped working for Firefox. I'm using it on Nightly 31.0a1 and it's working fine. If it does stop working, then it's HP's fault for not pushing an update to their extension.
-
How to include username and passowrd in the wsdl file?
Hi...
I have done soap to file sceanrio. In that i have generated wsdl file and consumed it through the infopath. While executing through the microsoft infopath, it is asking for the userid and password. Can i include the id and password in the wsdl file itself which i will generate in ID? If yes/, please tell me the procedure to do it.As Amir suggested, you may provide in the URL but I wouldn't suggest it though. You don't want to hard code the user ID and password within in the WSDL because it is a bad practice especially the user ID and password may be different in different systems and every time you change the password, you have to regenarate your WSDL.
May be you thought through this but just in case if you didn't
KK
Maybe you are looking for
-
So, I've got several thousand photos, and a decent amount of videos of my daughter, along with a lot of stuff for work stored on my Time Capsule, and now I can't access any of it. I did a fresh install of Mavericks on my MacBook Pro last week sometim
-
Good day! When saving a file in Illustrator, I can not keep the older version. How You can save the file in an older version?
-
Unable to Verify Email Address
Hello, I recently bought my daughter an ipod touch and set it all up and it was working fine with her email address. Unfortunately, we had to exchange it as it developed a fault. I am now in the process of trying to setup facetime and IM but when I e
-
Substitution Rule in Controlling
I have a following scenario for "profit centre" in sap. and for the same wants to utilize CO substitution functionality, with 0KEM t code, If system determine Distribution Channel + Plant = Profit Centre 10+1000=1000 10+2000=2000 10+3000=3000 20+1
-
anyone knows a way to change the background skin for s60 v3 music player for the blue background? is there a way to alter this?