The server was unable to load the SSL provider library needed to log in
Hello All,
When I am trying to login to my default SQL 2008R2 SP2 instance in windows 2003 server via ssms, I am getting the below error
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
When I looked into the error log and i could see lot of these messages.
The server was unable to load the SSL provider library needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books
Online for information on this error message: 14 Not enough storage is available to complete this operation.
Force protocol encryption is set to off.
I am not sure what is the underlying problem. server's total RAM is 4 Gb and max_server_memory is set to 2 GB. CPU utilization is very normal at the time of issue.
I restarted the SQL service and i am able to connect to the instance, but the issue is repeating and i need to find a permanent fix.
Thanks
I could also see the below in error log some time before i get the above alert
Error: 701, Severity: 17, State: 123.
There is insufficient system memory in resource pool 'internal' to run this query
then after sometime flurry of alerts
The server was unable to load the SSL provider library
needed to log in; the connection has been closed. SSL is used to encrypt either the login sequence or all communications, depending on how the administrator has configured the server. See Books Online for information on this error message: 14 Not enough storage
is available to complete this operation.
Thanks
Similar Messages
-
The server was unable to process the request due to an internal error.
Properties set in my project are below
namespace EmployeeService
public class Employee
private int _Id;
private string _Name;
private string _Gender;
private DateTime _DateofBirth;
public int Id
get { return _Id; }
set { _Id = value; }
public string Name
set { _Name = value; }
get { return _Name; }
public string Gender
set { _Gender = value; }
get { return _Gender; }
public DateTime DateofBirth
set { _DateofBirth = value; }
get { return _DateofBirth; }
This is the service i have developed in my project
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the class name "Service1" in both code and config file together.
public class EmployeeService : IEmployeeService
public Employee GetEmployee(int Id)
Employee objemp = new Employee();
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spGettblEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter Idparameter = new SqlParameter();
Idparameter.ParameterName = "@Id";
Idparameter.Value = Id;
cmd.Parameters.Add(Idparameter);
con.Open();
SqlDataReader dr = cmd.ExecuteReader();
while (dr.Read())
objemp.Id = Convert.ToInt32(dr["Id"]);
objemp.Name = dr["Name"].ToString();
objemp.Gender = dr["Gender"].ToString();
objemp.DateofBirth = Convert.ToDateTime(dr["DateofBirth"]);
return objemp;
public void SaveEmployee(Employee objemp)
string cs = ConfigurationManager.ConnectionStrings["DBCS"].ConnectionString;
using (SqlConnection con = new SqlConnection(cs))
SqlCommand cmd = new SqlCommand("spInsertEmployeewcf", con);
cmd.CommandType = CommandType.StoredProcedure;
SqlParameter ParameterId = new SqlParameter()
Value = objemp.Id,
ParameterName = "@Id"
cmd.Parameters.Add(ParameterId);
SqlParameter ParameterName = new SqlParameter()
Value = objemp.Name,
ParameterName = "@Name"
cmd.Parameters.Add(ParameterName);
SqlParameter ParameterGender = new SqlParameter()
Value = objemp.Gender,
ParameterName = "@Gender"
cmd.Parameters.Add(ParameterGender);
SqlParameter ParameterDateofBirth = new SqlParameter()
Value = objemp.DateofBirth,
ParameterName = "@DateofBirth"
cmd.Parameters.Add(ParameterDateofBirth);
con.Open();
cmd.ExecuteNonQuery();
The Service Contract code is
namespace EmployeeService
// NOTE: You can use the "Rename" command on the "Refactor" menu to change the interface name "IService1" in both code and config file together.
[ServiceContract]
public interface IEmployeeService
[OperationContract]
Employee GetEmployee(int Id);
[OperationContract]
void SaveEmployee(Employee objemp);
// TODO: Add your service operations here
// Use a data contract as illustrated in the sample below to add composite types to service operations
and i deployed the EmployeeService in iis and consuming the service in my web application the code is below
protected void btnsave_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = new EmployeeService.Employee();
employee.Id = Convert.ToInt32(txtid.Text);
employee.Name = txtname.Text;
employee.Gender = txtgender.Text;
employee.DateofBirth = Convert.ToDateTime(txtdob.Text);
client.SaveEmployee(employee);
protected void btnget_Click(object sender, EventArgs e)
EmployeeService.EmployeeServiceClient client = new EmployeeService.EmployeeServiceClient("basicHttpBinding");
EmployeeService.Employee employee = client.GetEmployee(Convert.ToInt32(txtid.Text));
txtname.Text = employee.Name;
txtgender.Text = employee.Gender;
txtdob.Text = employee.DateofBirth.ToShortDateString();
and when i am entering the details of employee Id,Name,Gender,DateofBirth and clicking save button iam getting the following error
The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior)
on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
Code in web.config file in Webapplication(Client) is the following
<?xml version="1.0"?>
<!--
For more information on how to configure your ASP.NET application, please visit
http://go.microsoft.com/fwlink/?LinkId=169433
-->
<configuration>
<system.diagnostics>
<sources>
<source name="System.ServiceModel.MessageLogging" switchValue="Warning, ActivityTracing">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelMessageLoggingListener">
<filter type="" />
</add>
</listeners>
</source>
<source name="System.ServiceModel" switchValue="Warning, ActivityTracing"
propagateActivity="true">
<listeners>
<add type="System.Diagnostics.DefaultTraceListener" name="Default">
<filter type="" />
</add>
<add name="ServiceModelTraceListener">
<filter type="" />
</add>
</listeners>
</source>
</sources>
<sharedListeners>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_messages.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelMessageLoggingListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
<add initializeData="C:\Users\HEMANTH\Desktop\Client\Client\Web_tracelog.svclog"
type="System.Diagnostics.XmlWriterTraceListener, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
name="ServiceModelTraceListener" traceOutputOptions="Timestamp">
<filter type="" />
</add>
</sharedListeners>
<trace autoflush="true" />
</system.diagnostics>
<system.web>
<compilation debug="true" targetFramework="4.0" />
</system.web>
<system.serviceModel>
<diagnostics>
<messageLogging logEntireMessage="true" logMalformedMessages="true"
logMessagesAtTransportLevel="true" />
</diagnostics>
<bindings>
<basicHttpBinding>
<binding name="basicHttpBinding" />
</basicHttpBinding>
<wsHttpBinding>
<binding name="mexHttpBinding">
<security mode="None" />
</binding>
</wsHttpBinding>
</bindings>
<client>
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/basic"
binding="basicHttpBinding" bindingConfiguration="basicHttpBinding"
contract="EmployeeService.IEmployeeService" name="basicHttpBinding" />
<endpoint address="http://localhost/EmployeeWebServices/EmployeeService.svc/mex"
binding="wsHttpBinding" bindingConfiguration="mexHttpBinding"
contract="EmployeeService.IEmployeeService" name="mexHttpBinding" />
</client>
</system.serviceModel>
</configuration>
Things i have tried till now are
1)changed the name of the name of the endpoint address basicHttpBinding to basicHttpBinding_IEmployeeService but still get the save error.
2)Opened the Message Log Trace. Got the error as follows
<MessageLogTraceRecord>
<HttpResponse xmlns="http://schemas.microsoft.com/2004/06/ServiceModel/Management/MessageTrace">
<StatusCode>InternalServerError</StatusCode>
<StatusDescription>Internal Server Error</StatusDescription>
<WebHeaders>
<Content-Length>730</Content-Length>
<Cache-Control>private</Cache-Control>
<Content-Type>text/xml; charset=utf-8</Content-Type>
<Date>Sat, 03 Jan 2015 12:12:24 GMT</Date>
<Server>Microsoft-IIS/7.5</Server>
<X-AspNet-Version>4.0.30319</X-AspNet-Version>
<X-Powered-By>ASP.NET</X-Powered-By>
</WebHeaders>
</HttpResponse>
<s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
<s:Header></s:Header>
<s:Body>
<s:Fault>
<faultcode xmlns:a="http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher" xmlns="">a:InternalServiceFault</faultcode>
<faultstring xml:lang="en-US" xmlns="">The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute
or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.</faultstring>
</s:Fault>
</s:Body>
</s:Envelope>
</MessageLogTraceRecord>
Try to understand but could not understand because i'am new to wcf services. Please help me to find the error details.
Thanks in advance
Regards
rax227
Hi Mohan,
I didn't use Fiddler before, I just download and use it but how to see the request message from this software?
I have logged the request to event log before send to web service and copy this request from event log to testing with soapUI, so I don't think have between the actual messages being sent to your client via orchestration and soapui. In the log Response shape
I see the fault response in event log.
You can see
this link to know how to use fiddler. As I suggested above the error you need to check is at the server side who is hosting the service( your party ) because you are getting fault response properly from them. The webservice you are calling seems to look
like WCF service too. Your life would have been so easier if you could ask them to have firewall open from your dev box to their dev server so that you can use use "Add Service Reference" wizard, that even they have .NET wcf service too.
Did you by any chance manage to talk to them what they are getting or if they can increase the exception details in the fault message for you?
If this answers your question please mark it as Answer and if this post is helpful, please vote as helpful. Thanks ! -
I get the following error while saving a task inside task list:
"The server was unable to save the form at this time. Please try again."
I tried restarting "search service host controller".
The server has 8 GB RAM and according to task manager, 6.67 GB is being used.
I logged into the site with user which is the owner of the site. I tried creating tasks from client as well as the SharePoint server itself. Same error is shown in both the cases.
How do I find information on the exact problem that is causing the error? What are possible solutions?Hi robikshrestha,
This error message often shows when there is low memory that can be used, the workaround restart the “SharePoint Search Hosting Controller” service is to release some memory, and make it work. Whether restart the service release memory
in your situation?
Would you please check whether this issue happens all the time in task list, or happens sometimes when the memory is lower to use. If it doesn’t have a large impact, you can restart the server, check the result. have a look at the event
log and ULS log, see whether there is related information.
If it happens all the time, would you please use other browsers, whether the results are same? This may be caused by some add-ons in IE, like Free Download Manager I have seen.
Thanks,
Qiao Wei
TechNet Community Support -
2013 standard sharepoint server. Content DBs were on a Trial enterprise server and copied over to standard server. All was good on trial server.
there are 8 sites on server, 2 of the sites cannot create or edit items, they get "The server was unable to save the form at this time. Please try again"
googling around i tried everything. restarted search host controller, checked ram usage (8gb free), manage content types, iisresets, edit the web.config file ( add things for ram, search host, etc), no alternate access mappings, .net HTTP activation, rebooted
server... I'm sure i missed some.
The server is new install, all but the August HF CUs. Trial server the content DBs came from is at same level.
It is not a server level issue as the other 6 sites are fine. its something with just 2 sites.
kinda stuck here...
Thanks,
Scott<-With the USL Logs were hard to track down what was happening, though I think it was too do with /_vti_bin/client.svc/ProcessQuery.
I did the Enable/Disable Anonymous Access on the Directory with no luck.
Brought up Fiddler and Saw that I was getting 401 and 500 Errors on
GET http://team.intranet.eandm.com/it/_vti_bin/client.svc/ProcessQuery HTTP/1.1
So it had something to do with Permissions. I checked the Authentication and the sites that worked had Forms Auth Enabled, and the ones that didn't, didn't have forms Auth enabled. Enabling it manually was no go.
I then went though the web.config on the working and non-working sites and there were some differences. The Authentication was Forms on the working site, Windows on the nonworking. There was many things not present. httpModules section was missing,
Many of the Microsoft Identity /Authentication lines etc.
So I Basically took the web.config from the working site and copied it to the non-working site preserving the following line from the original web.config:
<machineKey validationKey="{key}" decryptionKey="{key}" validation="{hash}" />
After that I had Security Issues, Though I think this was Caused by the July 2014 CU making everything use the Microsoft Identity parts, where as the server I was porting form had the sites created before the July 2014 CU. (though both were at the same level)
Even though all of the users were present in the site security, I had to Drop and re-add them to every site/and list with special Perms.
With the Security Fixed, I no longer received the Error "The server was unable to save the form at this time. Please try again"
Knock on wood its all functioning fine. -
The server was unable to save the form at this time. Please try again
Having created a new custom list (even with only a text field) I am unable add new items to the list - the error message is Unexpected
response from server. The status code of response is '0'. The status text of response is ''. when in 'quick edit'.
If I try to add or modify an item in the list by clicking 'add new item' I get "The
server was unable to save the form at this time. Please try again."
I have restarted the Sharepoint Search Host Controller server but to no avail. I have 24Gb RAM for this server so it's not a
memory issue (8Gb available). I have also tried from various browsers including Chrome and Safari - still the same error message.
This error only occurs on lists. I can edit document properties in a library and have no problems with calendar entries.
There are no entries in the event viewer, so where do I need to begin looking to find out what is (or rather is not) happening?One thing I noticed in SP 2013 is that if your list has unique permissions and a user/group has permissions only on that list and has limited or no access at the site level, then you run into this error: "The server was unable to save the form at this time.
Please try again."
This can be resolved by either giving that user/group atleast read access at the site level or in my case I had to create a new permission set (since we cant update limited access permission set) which is same as limited access but with the additional permission
of "Use Remote Interfaces - Use SOAP, Web DAV, the Client Object Model or SharePoint Designer interfaces to access the Web site."
I am not sure if this is a bug or as per design, but not allowing a user who has needed permissions at the list level but limited access at site level doesnt seem right. Never ran into this issue in prior version of SharePoint. I tested and this additional
permission doesnt seem to violate any security at site level. But implement this at your risk. No guarantees provided and not responsible for any issues with this implementation if any. -
Error:- The server was unable to save the form at this time. Please try again.
Hi,
I have SP 2013 intranet sites.
I am trying to edit the list item in site and getting the error "The server was unable to save the form at this time. Please try again."
I read many article on this forum. to chck web.config file, to restart
“SharePoint Search Hosting Controller” But no help.
Still i am getting this. what could be the reason now.
Please provide the resolution. I am trying to resolve this from last two days.
Thanks,
RakeshNormally, there's something wrong with the form responsible for editing list items. Is it customized? If not, you could use the free SharePoint Designer tool to delete the current form, create a new one (wait some time before caching issues are solved)
and you should be good to go. If it is customized, contact the team responsible for managing it.
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com -
Lync 2013. There was a problem connecting with the Exchange. Unable to load the magazine discussions.
Installed Lync Server Standart 2013, client PC MS Office 2013.
As the mail system - Lotus Notes Domino Server and Lotus Notes client, respectively.
Exchange is not installed at all.
question:
1 What is the message: "There was a problem connecting with Exchange. Unable to load the magazine discussions." and how it is fraught?
2 How can I fix this message? Cleaning the C: \ Users \% UserName% \ AppData \ Local \ Microsoft \ Office \ 15.0 \ Lync \ does not help
3 What are the disadvantages when using Lync Server Standart 2013 without Exchange? In principle, I put for Lync Exchange?
4 What are the advantages when using Lync Server Standart 2013 with Exchange?
5 Is it possible to work simultaneously Lync Server Standart 2013 + Exchange + Lotus Notes
Thank you.1) That sounds like a strange translation. But basically, it wants to connect to Exchange and it's complaining.
2) You can attempt to go to Tools->Options->Personal and set Personal Information Manager to None, and in Lync Management Shell run set-csclientpolicy
http://technet.microsoft.com/en-us/library/gg398300.aspx with the following options:
DisableCalendarPresence $True
DisableEmailComparisonCheck $True
EnableExchangeContactSync $False
There may be more, I've never tried to completely disable Exchange features from Lync.
3) No conferencing plugin for meeting invites, no automatic presence management based upon your calendar, no searching your Outlook contacts for new contacts, no voicemail, no conversation history,no unified contact store, and more:
http://technet.microsoft.com/en-us/library/jj688098.aspx
4) This is just #3 in reverse :)
5) Depends on your goals, but the experience wouldn't be great. You'd want to keep your contacts and calendar in Exchange and your email in Notes. It would be confusing to your users.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications -
I'm doing a project for my Professional Writing course and I
have to use RoboHelp to create an online help document. The
professor provided templates for us to use but when I go to open
the project file I get the following error: "open project was
cancelled or the application was unable to load database
for....(then the directory)"
I know the project file isn't corrupted because the members
of my class are using the same one without issue. I tried
re-downloading the file, I also re-installed the program itself,
still with no luck. I'm using a Trial Version of RoboHelp 6.0 .
The only other suggestions I have seen are that I don't have
edit perms for the system, but it's my personal laptop and I have
full admin privs. I thought at first that the folder was read-only,
but when I opened it up all it displays is the little green box in
the checkbox (which doesn't mean the folder is read-only, it's just
some stupid windows default, it's only read-only if the box is
actually checked). I tried making the entire directory read-only
and then turn it off but still get the same error.
Any suggestions?There's a topic on my site about Opening Projects that
includes the method of deleting the CPD and XPJ files but I didn't
cover that as the project is good for everyone else. Anything is
worth a try at the moment though.
Another thing to try is to rename the course folder, then
create a new folder with the same name plus all sub folders. Then
move the files across. That will ensure the folder properties are
good and not read only. Yes I know what you said but again anything
is worth a try.
Also, in the last post you are saying the directory is not
read-only. I assume the files are all good?
Ref my previous post, is it the case that now you are getting
an error before the original error would have popped up? -
Hi Guys,
I am creating the library using object model with custom content type. When i am opening document from custom content type, the meta data fields are not displaying in the document and throwing below error.
The document information panel was unable to load. the document will continue to open. For more information, contact your system adminsitrator.
Document Information Panel cannot open a new form.
The form contains schema validation errors.
Content for element '{http://schemas.microsoft.com/office/2006/metadata/propertiesRoot}properties' is incomplete according to the DTD/Schema.
Expecting: {http://schemas.microsoft.com/office/2006/metadata/properties}properties.
But after saving the document, then meta data is enabled.
Thanks in advance for suggested solutions.
thanks
Santhosh GHi,
For a better troubleshooting, I suggest to do as follows:
1. Please try to update the Location column's schema by following the steps below.
1) Go to Site Settings -> "Site Columns"
2) Click on "Location", after the page is opened. Don't modify any settings, click "OK" to forcibly update the field's schema.
2. Re-edit the document information panel template to see if the issue still occurs.
Please go to the Library setting > click the corresponding content type(need to enable managed of content types in Advanced settings) > click Document Information Panel settings.
3. Here are some similar links about your issue, please take some time to look at them:
http://social.msdn.microsoft.com/Forums/en-US/sharepointcustomizationlegacy/thread/243b4852-3f17-4a3a-b6d7-187d65a5f088/
http://blogs.msdn.com/b/raresm/archive/2010/03/30/document-information-panel-cannot-open-the-form.aspx
https://joranmarkx.wordpress.com/2012/02/10/sharepoint-document-information-panel-cannot-create-a-new-blank-form/
If the issue still occurs, please check if the command below can help(change the site URL and the library name in the code):
Apply-Fix -siteUrl "http://your site URL "
function Apply-Fix($siteUrl)
clear
Add-PSSnapin "Microsoft.SharePoint.Powershell" -ErrorAction SilentlyContinue # -EA 0
[Environment]::CurrentDirectory=(Get-Location -PSProvider FileSystem).ProviderPath
foreach ($spwTarget in (Get-SPSite $siteUrl).RootWeb.Webs) {
Write-Host "Checking Web: " $spwTarget.Url
$list = $spwTarget.Lists["your library name"]
$fields = $list.fields
foreach($field in $fields)
if($field.SourceId -eq '{$ListId:your library name;}')
$schemaxml = $field.SchemaXML
$schemaxmldata = [xml]$schemaxml
$schemaxmldata.Field.SetAttribute("SourceID", $list.ID)
$schemaxml = $schemaxmldata.get_InnerXml()
$field.SchemaXML = $schemaxml
$field.Update()
Write-Host "Fixed" $field.Title "field in the library"
Write-Host "Done."
More information:
SharePoint 2010: Creating a Custom Content Type using Visual Studio
http://www.codeproject.com/Articles/410880/SharePoint-Creating-a-Custom-Content-Type-usi
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected].
Dennis Guo
TechNet Community Support -
INSTALLED ITUNES AND THE ERROR-MAPI WAS UNABLE TO LOAD THE INFORMATION SERVICE APLZOD-OCCURS. WHAT DO I DO.
Is this on a Windows XP, Vista or 7 system?
-
I can no longer sync. I get the "iTunes was unable to load data class information from Sync Services. Reconnect or try again later." Trying again gets same error. Thoughts?
See:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
"load data class" -
My iCloud Contacts will not load in Microsoft Office. error is MAP[ was unable to load the information service C:\PROGRA~2\COMMON~1\Apple\INTERN~1\APLZOD.dll. How do I correc t this problem?
Hey PCSISTAH,
Thanks for the question. I understand that you are experiencing issues with iCloud Contacts and Microsoft Outlook. The following resource may provide a solution:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/TS3998
Thanks,
Matt M. -
The debugger was unable to redefine the recompiled classes
Hi,
I'm using the Jdeveloper11.1.2 and I'm getting the below error while rebuilding the java file in debug mode after updating my java file.
The debugger was unable to redefine the recompiled classes.
Unsupported operation: schema change.
I tried the Following Way to remove this issue:
1: stop the server
2: close the appliication and remove the classes files and data files from the application.
3: start the weblogic server and stop the running application.
4: clear the drs and temp file and change the directory.
5: restart the system and once again clean the temp files.
6: rebuild all the files and make the jar file but at runtime in debug mode when I rebuild the file once again I'm getting the above error.
please help me out how I can solve this problem.
thanks in advance.
Regards
SanjeevWhen you run the UI in the browser does the change in the Java class show up / work fine ? Then you need not worry about the message technically ;)
Ideally when you see such an option you have probably modified a method signature or added a new method.So you just need to run your UI again from Jdev.
Also check if this helps -
http://rimmidis.blogspot.in/2010/03/hot-deployment-after-compiling-in-your.html -
I recently bought a new laptop and installed itunes. I was trying to sychronize my ipad and iphone, but it seems that the itunes was unable to recognize the devices. Can you tell me how I can solve this problem?
how new is the Notebook ?
Also double check your firewalls and virus protection that they are not blocking any ports also make sure you are plugging in the fastest USB -
I have this error when trying to log in the web administration.
I have a problem with my AD, so it is unavailable, i think for this i can´t login.
Can I log in the administration console by using another password or user not vinculated to the domain?
Thanks in advance.You can login with every local admin account in the admin-group. These admin accounts have to be created before the VMware-Server was installed. If you want to add further admin accounts after the VMserver-inst, you have to manually add them to the __vmware__ group.
Maybe you are looking for
-
Error while deleting the Data Source
Hi gurus, I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205". but that source system no more available. Is there any way to delete the Data Source. Thanks in advance. CK.
-
Linkage and performance problems with "Additional source folders"
Hello There seems to be a some problems when using "additional source folders" in Flash Builder 4.5 and 4.5.1 (links to folders outside a project see pic below). Hopefully I'm doing something wrong and some kind soul could point it out. I have a libr
-
Using flash island in ABAP Webdynpro
Hi, I am trying to use Adobe Flash Island.. but when i right click on root element container i dont get option as Swap root element.. I also tried creating new element with Flash Island option... I also cant find library stored in the MIME repository
-
Hi Experts, Currently, I'm re designing a PLD for Profit and Loss Statement. Is it possible to include a query and insert it in the PLD? and How?
-
Recommendations for DVI KVM Switches?
I wish to share the same USB wireless keyboard/mouse, and monitor between my Macbook and PC. Has anyone tried this with a DVI KVM switch, and can you recommend which one to use? They're a little pricey, so I'd like to get comments from actual users i