The service DS.RFCService could not be found on the client side
Hi Experts,
I am facing the following error message when i try to create SAP connection from management Console of DataServices 4.0 SP1
"The service DS.RFCService could not be found on the client side"
In Management Console...
SAP connections->RFC Server configuration.
Trying to add RFC Server interface. it says
The Service DS.RFC Services could not be found on client side.
can anyone help me out of this issue..plz
In my System I installed SAPBusinessObjects BI Platform 4.0 instead of Information platform services,BODS 4.0 SP1,IS 4.0 SP1...
I checked the CMC ->servers->EIM -APS services->properties. i could not find any RFC or admin services running.
anything is missing? any note explain about this?
Pls advice
Thank You In Advance.
Hi,
Check this note - KBA 1671522, it holds good for RFC also.
Arun
Similar Messages
-
The service DS.AdminService could not be found on the client side
HI,
we have installed below
Software
Version
IPS
INFORMATION PLATFORM SERVICES 4.1 SP02 WINDOWS (64B
Data Service
DATA SERVICES 4.2 WITH SP01 WINDOWS (64B)
Information Steward
INFORMATION STEWARD 4.2 WITH SP01 WINDOWS
SAP NW 7.4
Netweaver 7.4 portal
When I login to portal with below links I am able to see the related screens.
http://host:port/irj/portal
http:://host:port/BOE/CMC
http://host:port/BOE/InfoStewardApp/1403181301/ICCExplorer/logon.do
However when I log:portin with below link using admin account I am facing error :
Welcome Administrator
Logout
The service DS.AdminService could not be found on the client side (FWM 02027)
Please see attachment.
http://://host:port/DataServices
Please help. Thanks.
Regards,
KrishnamPlease see below properties for EIM APS. please let me know where can I check.
Server Name:
ID, CUID:
3806 , AWJiF9VQoMtJiEyRIjv0py4
Node:
USMHR1_ERP301 (USMHR1-ERP301, SAPDataServices-S)
Description:
EIM Adaptive Processing Server
Command Line Parameters
-server -Dcom.sap.vm.tag=USMHR1_ERP301.EIMAdaptiveProcessingServer -Djava.awt.headless=true "-Dbobj.enterprise.home=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/" "-Dbobj.javaserver.home=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/" "-Dboe.common.dir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/lib/" "-Dboe.external.dir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/lib//external" "-Dboe.bundles.dir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/lib//bundles" "-Djava.io.tmpdir=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/temp" "-Dbusinessobjects.logs.home=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/" "-XtraceFile=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/aps_USMHR1_ERP301.EIMAdaptiveProcessingServer_jvm.log" "-XX:GCHistoryFilename=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/aps_USMHR1_ERP301.EIMAdaptiveProcessingServer_gc.prf" "-Xloggc:D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/aps_USMHR1_ERP301.EIMAdaptiveProcessingServer_gc.log" -XX:+PrintGCTimeStamps -XX:+PrintGCDetails -XX:LogGcMaxFileCount=3 -XX:LogGcMaxFileSize=5m "-XX:ErrorFile=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/[email protected]" -Xms512m -Xmx2g -XX:MaxPermSize=256m -XX:+UseParallelOldGC -XX:+HeapDumpOnOutOfMemoryError "-XX:HeapDumpPath=D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/logging/" -XX:+ExitVMOnOutOfMemoryError -Xjvmx -XsapSystem:08 -Xrs -Djava.net.preferIPv4Stack=false -jar "D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/bin/boeserver.jar" -workdir "D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/java/pjs/container/work"
-name USMHR1_ERP301.EIMAdaptiveProcessingServer -pidfile "D:/SAP BusinessObjects4.1IPS/SAP BusinessObjects Enterprise XI 4.0/serverpids/USMHR1_ERP301_USMHR1_ERP301.EIMAdaptiveProcessingServer.pid" -ns USMHR1-ERP301.corp.pattersoncompanies.com:6400
Common Settings
Request Port:
Auto assign
Host Identifiers:
Auto assign
Hostname
IP Address
Hostname Value
(IPv4) (IPv6)
Automatically start this server when the Server Intelligence Agent starts
Use Configuration Template
Services Manager
Service Startup Timeout (seconds):
Restore System Defaults
Set Configuration Template
TraceLog Service
Use Configuration Template
Log level:
Unspecified
None
Low
Medium
High
Restore System Defaults
Set Configuration Template
Data Services Job Launcher Service
Use Configuration Template
Configuration Parameters
Log Level:
NONE
INFO
FINER
Restore System Defaults
Set Configuration Template
Data Services RFC Server Service
This service has no configuration property.
Data Services View Data Service
Use Configuration Template
View Data Service Configuration
Service Name:
Listener Port:
JMXConnector Port:
BatchSize (KB):
Minimum Shared Service Providers:
Maximum Shared Service Providers:
Maximum Dedicated Service Providers:
Recycle Threshold:
Number of attempts to launch service provider:
Maximum idle time for shared service provider (minutes):
Log Level:
NONE
INFO
FINER
Restore System Defaults
Set Configuration Template
Data Quality Service
This service has no configuration property.
Data Services Metadata Browsing Service
Use Configuration Template
Metadata Browsing Service Configuration
Service Name:
Maximum Data Source Connections:
Retry attempts to launch Service Provider:
Stateful Connection Timeout (seconds):
Stateless Connection Timeout (seconds):
Recycle Threshold:
Log Level:
NONE
INFO
FINER
Collect Connection Statistics
Listener Port:
JMXConnector Port:
Restore System Defaults
Set Configuration Template
Cleansing Package Builder Auto-analysis Service
This service has no configuration property.
Information Steward Data Review Service
Use Configuration Template
Data Review Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Information Steward Metadata Search Service
Use Configuration Template
Search Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Information Steward Metadata Integrator Service
Use Configuration Template
Integrator Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Information Steward Application Service
Use Configuration Template
Application Service configuration
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Data Cleansing Advisor Service
This service has no configuration property.
Information Steward Administrative Task Service
Use Configuration Template
Task Services Configuration
Concurrent Thread Instances:
Thread process timeout (minutes):
Log Level:
FINEST
FINER
FINE
CONFIG
INFO
WARNING
SEVERE
Restore System Defaults
Set Configuration Template
Cleansing Package Builder Publishing Service
This service has no configuration property.
Cleansing Package Builder Core Service
This service has no configuration property. -
I am getting an iCould error message at PC startup: The procedure entry point_objc_init_image could not be found in the dynamic.....
i ahve same problem
-
After restoring from Time Machine onto a new Mac, all images in Aperture are now just outlined. Aperture can't find the volume of the master images because that was the volume of my old Mac. Is there any way to tell Aperture to reconnect with the master images in the new volume? I've tried everything I could think of, with the Alt+Cmd upon opening Aperture and the trying all of the repair and rebuild choices, but nothing has worked.
Sorry to hear that this isn't working for you. In all my experience it has always behaved correctly.
Just to be certain the correct procedure is being followed
You select all the missing images in Aperture before running Locate Referenced Files
In the window that opens all the selected images are in the upper part of the window in red
You select one of these images then click in the lower half of the window
In the lower half of the window you locate the file that you've selected in the upper half of the window
the reconnect all button becomes active and you select it
But at this point only the file selected and those in the same folder get reconnected? The overall layout of the file system on the new disk is the same as the old disk?
In your secon post you mentioned needing to use the alt key to make the reconnect buttons active. Is this still the case or do they become active when you go through the above steps? -
I am currently taking the course "C# Fundamentals" from Bob Tabors site: LearnVisualStudio.NET . I'm on day 8 where we are integrating SQL Server with C#. In Lesson 6 and 7, (havent' gotten past these two) I am having an
issue. In Lesson 6, "Retrieving Data with ADONET 2 in a Connected Scenario (SQL Server Compact Edition) when I go to create the data file I get the error message I typed into the title. I cannot get the db to appear in the Solution
Explorer, or open up so I can create a table. When I try to skip by that lesson, and complete lesson7, I'm running into the same basic problem, where the error messages are different but I get an exception when I attempt to run the program. Even
though I have been able to create the table for this lesson, the Exception states I have an invalid object name 'Customers' which is the name of the table. I have tried reading several different suggestions for correcting this issue, but have not understood
exactly what I need to do. Since I work from home on my computer, I do not want to do anything with files or downloads unless I understand what I need to do, cause I do not want to lose my job. Any help would be appreciated.
JennyBarrett7Hi
According to your error message, we need to verify if Microsoft SQL Server Compact appears in the
Change Data Source dialog. If not, you need to install
SQL Server Compact components for Visual Studio firstly, and if you choose to install SQL Server Compact 4.0 , you should note that SQL Server Compact 4.0 supports in Visual Studio 2010 Service Pack 1 or later versions. I recommend you to install the latest
Service Pack (SP) of SQL Server Compact, and latest SP of Visual Studio, then check if the error still occurs. For more information, see:
http://blogs.msdn.com/b/sqlservercompact/archive/2011/03/15/sql-server-compact-4-0-tooling-support-in-visual-studio-2010-sp1-and-visual-web-developer-express-2010-sp1.aspx
However if there is no problem with the installation of SQL Server Compact, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
http://forums.asp.net/ . It is appropriate and more experts will assist you.
In addition, you can review the following link:
Working with SQL Server Compact in Visual Studio:http://msdn.microsoft.com/en-us/library/gg606540(v=vs.100).aspx
Thanks
Lydia Zhang -
CFAJAXPROXY: "The specified CFC proxy could not be found."
{ColdFusion 8, latest, Windows.}
The following statement occurs (in an included CFM file):
<cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
The "crv2_js.cfc" file is indeed located in the same directory. (If you request it at the same URL, and enter the administrator password, a nice formatted description of the library and its methods dutifully appears, so it is there...)
But the error is:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
Looking also on the Administrator screen, I confirm that the directory is not mapped.
Other, <cfinvoke> calls have been used to a sister CFC-library in the same directory without incident. So I am confident that the message that I am seeing is somehow bogus ... but I do not yet know what sort of "bogosity" it must be.Now here is something I didn't expect to see. When I turned on "extended error information" (or whatchamacallit...) I got this additional information in the displayed log:
The specified CFC proxy could not be found.
The path to the CFC must be specified as a full path, or as a relative path from the current template, without the use of mappings.
The error occurred in C:\Inetpub\wwwroot\NCPT\CRV2\cr_PrototypeManager.cfm: line 235
<cfgridcolumn
name="DefinitionIsLocked"
233 : header="Is In Use"
234 : type="boolean"
235 : select="no">
236 :
237 : </cfgrid>
(Ooh... formatted! Now ain't that slick!)
I took the liberty of pasting-in lines 231-232, which the debugging-output did not include. In fact, here is the entire block of code:
<cfgrid name="datagrid" pagesize="5" format="html" width="100%" height="200"
"cfc:proxy.GridSource_ReviewPrototypes({cfgridpage},{cfgridpagesize},{cfgridsortcolumn},{c fgridsortdirection},getPageSize())">
<cfgridcolumn
name="ID"
header="ID"
display="false" >
<cfgridcolumn
name="TemplateName"
header="Template Name" >
<cfgridcolumn
name="PrototypeClassName"
header="Prototype Class" >
<cfgridcolumn
name="Description"
header="Description">
<cfgridcolumn
name="Enabled"
header="Enabled"
type="boolean">
<cfgridcolumn
name="DefinitionIsLocked"
header="Is In Use"
type="boolean"
select="no">
</cfgrid>
So... why on earth would an error like that be showing up at a place like this? (Removing the "select='no'," on the wild-guess theory that it might be "the odd man out," as-expected had no useful effect.)
My hypothesis here is that the "failure location" actually has nothing to do with anything: this is simply the last clause in the CFGrid construct, and the computer is now trying to place a call to this function:
<cffunction name="GridSource_ReviewPrototypes" access="remote" returntype="any">
<cfargument name="page" required="yes">
<cfargument name="pageSize" required="yes">
<cfargument name="gridsortcolumn" required="yes">
<cfargument name="gridsortdirection" required="yes">
<cfargument name="customPageSize" required="no" default="0">
Uh huh... straight out of a demo.
I thought I had just-now discovered the problem, as I was writing this, because the "bind" expression had two additional parameters which are not listed in <cfargument> tags. But, much to my surprise, it didn't fix it.
To be absolutely complete in my description:
In an included header-file, we have: <cfajaxproxy cfc="crv2_js" jsclassname="ServerProxy">
On this (Windows) host, the file-name of the CFC file is "crcv2_js.cfc" and it is located in the same directory as both the cfm and the included cfm.
In the <head> portion of the main page, we have (in an in-line <script> tag):
var proxy = new ServerProxy();
proxy.setErrorHandler(showError);
proxy.setCallbackHandler(handleResult);
I'm starin' at this thing and starin' at this thing and everything I see is screamin' at me, "bogus!" 'Cept I know it can't be.
The generated page-source code includes the following, including a bit which I have highlighted in bold face. I don't know where that bit came from.
<script type="text/javascript">
ColdFusion.Ajax.importTag('CFAJAXPROXY');
</script>
<script type="text/javascript">
var _cf_crv2_js=ColdFusion.AjaxProxy.init(
'/CRV2/crv2_js.cfc','ServerProxy');
but it does seem plausible since the URL to the site-page (on case-insensitive Windows) is, indeed:
http://tlcapps/crv2/cr_PrototypeManager.cfm
and, again, if I type in "http://tlcapps/CRV2/crv2_js.cfc" and prove that I do know the proper ColdFusion admin-password, I get a nice pretty-printed description of this library and its methods... including the one I am trying to call. It does exist. -
My iPad2 "could not be found on the network" and won't sync
Please Help!
My iPad 2 won't sync and doesn't seem to be "seen" by my PC.
I have rebooted, restored and reset the iPad, and installed latest ios.
PC is running Windows 8 with latest iTunes whic has been re-installed.
The USB port and cable work fine - I don't have the the same problem with my iPhone 4S.
The iPad logo comes up in iTunes as a device, and I get the "pinging" noise when connecting. The iPad details come up in iTunes, but I can't back up or connect or do anything witht it.
It won't sync and I get error messages:"iTunes was unable to load data class information from Sync Services"
and in one of my explorations
"iPad could not be found on the network"
Sometimes when the Ipad is connected iTunes will be ok for a short time, then go into "not responding"
When I try Windows Explorer the iPad does not show in the "Removable Storage" section like it used to, and like my iPhone still does.
In Device Manager, Apple iPad Properties, I get the message "This device cannot start (Code 10)". On line searchinh suggests this could be a driver problem however when checking for drivers I got the message saying my drivers were up to date.
Please HELPPPPPP!!
ThanksIt's now sorted - a driver problem
I found this tip in another thread. Thanks LexLester
LexLester
Re: How to transfer pictures from iPad to PC? 06-Dec-2013 09:51 (in response to amershiraz)
When you are connecting your iPad with your PC, go to Control Panel, click 'view devices and printers' under Hardware and Sound. Your iPad device should be shown in there even it is not showing in My Computer. See whether there's troubleshoot for Apple iPad. Then troubleshoot it. It should be the device driver which is not functioning or being disabled or not up to date. You should be able to find your iPad under the Portable Devices in My Computer after the troubleshooting. -
I get a pop-up message saying "A server with the specified host name could not be found", whenever I try to access any streaming websites/apps or even WhatApp over Wi-Fi and I cannot access the specific THING for that moment, and I've tried switching Wi-Fi On and Off both in my Phone and also in the Router. I got an internet connection and a Wi-Fi router just before two days, and it's happening since. I got the internet speed around 80kbps and i can easily stream YouTube videos except sometimes, I receive that annoying message. I can't even browse the internet in Safari, which says "No Internet Connection"(Even though the Wi-Fi is connected), and I can access it after somewhile (say 10 minutes, it'll be perfectly alright). I use iPhone 4s. And everything about the internet connection is totally fine in my Computer, but not in my iPhone, as I've explained the issues, above. If there are any technical settings that I should change/modify, either on my computer(Windows 7 OS) or in my iPhone(iOS 7.0.4), PLEASE let me know
I hope I've provided enough information for the reader to understand my point. (I apologize for my verbal mistakes, if there are )
THANKSHello Paneesh,
Thank you for the details of the issue you are experiencing with Wi-Fi on your iPhone 4s. I recommend the following steps:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your W-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
If the issue is still unresolved Wi-Fi disconnects or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for using Apple Support Communities.
Best,
Sheila M. -
The server could not be found on the network ORA-12154
Hi All,
I have problem with one application. She run with Oracle DB. I installed Win2008R2 x64 and Oracle DB 32bit on the same server. I tried connect to DB via Oracle SQL Developer and SQL Plus and both run without problem, but when I insert the same parameters into application OpenText Content Server 10, then I see this Error:
Content Server Error:
[Error: The server could not be found on the network. ----> Error stack ----> 1) E675414020:The server could not be found on the network.:ORA-12154: TNS:could not resolve the connect identifier specified ]
This application need only 3 parameters (System User Name, password and service name). I compare it with ORA files (listener, sqlnet and tnsnames) and I think that all is right. Here are this three files
listener:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
sqlnet:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
tnsnames
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Do you have any idea where is problem?
Thank you
Vaclav893964 wrote:
Hi All,
I have problem with one application. She run with Oracle DB. I installed Win2008R2 x64 and Oracle DB 32bit on the same server. I tried connect to DB via Oracle SQL Developer and SQL Plus and both run without problem, but when I insert the same parameters into application OpenText Content Server 10, then I see this Error:
Content Server Error:
[Error: The server could not be found on the network. ----> Error stack ----> 1) E675414020:The server could not be found on the network.:ORA-12154: TNS:could not resolve the connect identifier specified ]
This application need only 3 parameters (System User Name, password and service name). I compare it with ORA files (listener, sqlnet and tnsnames) and I think that all is right. Here are this three files
listener:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
sqlnet:
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES)
tnsnames
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = WIN-R0OEE0OAE5Z)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Do you have any idea where is problem?
Thank you
VaclavYou listener has nothing to do with this error. Your request for a connection never left the client machine.
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/ -
BusinessService could not be found on the LSM!
<p> </p><div><font face="Arial" size="2" color="#0000ff">I havesuccessfully installed Hyperion Performance Suite Release 8.3.0 inour lab environment. The installation went well with out anyissues.</font></div><div> </div><div><font face="Arial" size="2" color="#0000ff">To verify thatHyperion Performance is installed correctly, first I startedstartCommonServices.bat, it started successfully. Then I tried tostart startIntelligenceService.bat but it failed. we saw thefollowing error message in the log file;</font><br><br>Initializing the global ORB<br>activating the POA Manager<br>All done initializing class<br>o--> Created CORBA Server.<br>o--> Starting ProxyLogger for remote logging.<br>o--> Using Prefix 0 for service.<br>Parents process ID [2828]<br>Command for helper process =><br>C:\GCTI\Hyperion1\BrioPlatform\bin\services.bat -m 12521 -a log -pbi -b C:\GCTI\Hyperion1\BrioPlatform\bin -c 1800 -l Guest -nBI_0_Guest<br>Child Process PID [ 1072 ]<br>o--> Initializing LSM@Guest:1800<br>Encountered Network Error: Check hostName and port Number<br>o--> Local LSM initialized.<br>Encountered Network Error: Check hostName and port Number<br>BusinessService could not be found on the LSM!<br>LocalServiceManagerImpl::findService(const ServiceCriteria&crit)<br>ServiceCriteria --<br>TypeId: 0ad72298-0000-0ccc-000000e750e6ffdd<br>VersionId:<br>DomainId:<br>BusinessService not created on LocatorProxy!<br>LocatorProxy::findService(const ServiceCriteria& crit)<br></div><div> </div><div><font face="Arial" size="2" color="#0000ff">But I can able tostart tomcat 4.1.30 and able to view the Hyperion Performance loginpage. We cannot get into page (after giving login id) as it isgiving error "Could not find a Hyperion Performance Suiteserver running on Guest at port 1800. Please verify your serverconnect string and confirm that the server isup".</font></div><div> </div><p>Please help me to get rid of the error "BusinessServicecould not be found on the LSM!".</p><p> </p><p>Thanks,</p><p>Vasanth</p>
Repost:
2) Disk space
We are also running out of disk space and required to do housekeeping. Therefore, I also would like to enquire whether it is save to delete the folder D:\App\his\Brio8svr\brioplatform\server\rm1_<server_name>\root. Our current housekeeping script is to delete files that are greater or equals 5MB and 8 month earlier than the current date.
Example: Today is 24th May 2012, therefore the script will delete files that are greater than / equals 5MB and the last modified date is October 24th 2011 and earlier
I have read an article in ITToolbox that warns us not to delete this folder at all. However, we have files that may be 1GB or more at the folder. The article is found at http://businessintelligence.ittoolbox.com/groups/technical-functional/hyperion-bi-l/hyperion-jobs-fail-to-run-3550767.
Edited by: Rogerkoo on 29-May-2012 03:40
Edited by: Rogerkoo on 29-May-2012 03:43
Edited by: Rogerkoo on 29-May-2012 03:43 -
Trying to sync voice memos I get "was not copied to the iphone because it could not be found"
I recorded some "voice memos" on my iPhone 5 (iOS 6.1.3). I now just want to get them onto my computer. I have followed the instruction from other posts and selected the "Include Voice Memo" checkbox and also the "Voice Memo Genre" checkbox located on the Music tab. I then click on Sync and get the following error ... "Some of the items in the iTunes library, including ----- were not copied to the iPhone because they could not be found". So I understand that the memos were not copied to the phone ... this is good since I already have then on the phone. I want, instead for them to be copied FROM the phone to the computer. So what's the problem I thought that SYNC'ing meant copying new files from the iPhone to the computer as well as vice versa.
The Voice Memo is toolarge for me to simply email to myself so I need to understand what is causing this so that I can get around it. I have noticed that when I attempt to "Organize Library" and check "Consolidate Files" (suggested by some forum somewhere) when I close the dialog box and sync again, that when I return to the "Consolidate Files" checkbox i see that has actually cleared itself and is no longer checked. I am not sure if this is related or not.
I have a very business recording that is on my iPhone and MUST get this audio off the phone ASAP. Any help would be appreciated.
Sincerely,
gstenstromThe dialog tells you the path to the song is wrong/not there. Make sure you can play it in iTunes.
-
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
-
This is a new notification coming up with iTunes, why and how do I fix it?
The song “Penny Lane” could not be used because the original file could not be found. Would you like to locate it?
MaxHey xxCreepyFiaxx,
First, I would try the following suggested steps for when you don't see content in iTunes after updating:
Quit iTunes.
Download and install the latest version of iTunes.
Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
Mac OS X
/Users/username/Music/iTunes/
Microsoft Windows Windows XP and Windows 2000
\Documents and Settings\username\My Documents\My Music\iTunes\
Microsoft Windows Windows Vista and Windows 7
\Users\username\Music\iTunes\
Drag the iTunes Library file from the above location to the Desktop.
Open the Previous iTunes Libraries folder in the iTunes folder.
Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
Drag this file to the iTunes folder (the enclosing folder).
Rename this file to iTunes Library.
Open iTunes.
You should now see your missing content in iTunes.
via: No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
If that doesn't resolve the issue, then I'd go through the steps in here:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/TS1408
Have a good one,
Delgadoh -
Error message "... could not be found on the server."
I have been subscribed to a podcast for 3 years. I received an error message for that subscription recently stating,
"There was a problem downloading "Civil War Podcast by Dr. James Robertson Jr. from WVTF. The URL http://www.wvtf.org/news_and_notes/feeds/wvtf_cw_rss.php could not be found on the server."
Something else that may or may not be related, for months I haven't been able to find this specific podcast in the iTunes store when I search for it. However, my iTunes continued to download current podcasts.
What does this mean?I believe WVTF changed the podcast feed URL. I went to their website http://www.wvtf.org/index.php?option=com_content&view=category&layout=blog&id=44 &Itemid=160&limitstart=5 and got the feed URL and entered it directly under Advanced -> Subscribe to Podcast. The URL I used is http://www.wvtf.org/index.php?option=com_podcast&view=feed&format=raw
Good luck, Chris -
Standard cost estimate could not be found for the material
Dear All,
We have 4 manufacturing plants and 30 sale depots. We are maintaining price control (S) for FG and SFG in Manufacturing plants,price control (V) at depots for the same material code. we are getting an error message " standard cost estimate could not be found for the material" while doing billing at depot.
Please give me suggestion.
Your suggestion should be appreciate.
Thanks in advance............
AND
My client want to see profitability at manufacturing plant level and need break up for the COGM. So how can i get the values of depot sales.
please let me know how to do........Hai
Price control should be S for Depot also. You need to run standard cost estimate in DEPOT after entering additive cost under CK74N for frieght, excise duty etc. To transfer the standard cost from the source plant you need to make configuration in OMD9 defining the receiver and sender combination so that system can pick up the cost from source plant. This special produrement type needs to be asigned in the material masters of DEPOT under MRP 2 view.
Pushkala
Maybe you are looking for
-
AppleScript, what is the problem here?
Hello, I am making my way through this book and I have come across something that is not making sense to me. I entered this script from a book; tell app "Finder" set these_items to sort (get every document file of the front finder window) by creation
-
Creating new PCR Scenario in ABAP Workbench
Hi everyone, I'm trying a lot to create a new scenario for the PCR functionality of Manager Self Service but I'm having some problems. I enter in the transaction QISRSCENARIO and create a new adobe form from scratch. I created some characteristic and
-
Inverting a levels adjustment layer
Hi I have a levels adjustment layer and I want the opposite of this, so I want to invert it. Does anybody know how to do this? 222design
-
Keep getting an error from securesite.co.uk about ...
I have tried three times to pay for a skype number, and apparently it is just impossible to give any money to the company. I have tried emailing, I have tried to pay via the site three times, and I have had absolutely no luck. All I want to do is be
-
How many types of function modules are there
hi gurus, how many types of function modules are there... what type of function module bapi is.... i don't know much about that... pls help me... regards, praveen