The service name is invalid (NET HELPMSG 2185)

I tried to install the SAP Netweaver 2004s ABAP Trial Version on my PC (Vista).
I went through the steps:
1) Install SAP Management Console (sapmmc\sapmmcX86u.msi)
2) Start the Installer (image\setup.exe)
3) Start Application Server by selecting Start Application Server
So far so good.
I even could start the application server via http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000. And use SAP.
Then I got on with Getting Started and installed SAP GUI.
They recommended me to stop the application server thru
Start u2013> Programs u2013> SAP NetWeaver 7.01 ABAP Trial Version u2013> NSP u2013> Stop Application Server
This is where the trouble started.
Since this point I get the following error everytime I try to start or stop the application server thru
Start u2013> Programs u2013> SAP NetWeaver 7.01 ABAP Trial Version u2013> NSP:
============================= Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24701,ERR_EXHNDLR: Could not initialize exception handler.
-24748,ERR_FILEOPEN: Error opening file E:\sapdb\data\wrk\dbmsrv_GORDITO-PC.err
-24826,ERR_NIERROR: Can not open file E:\sapdb\data\wrk\dbmsrv_GORDITO-PC.err''.
(system error 5; Access is denied.)
Error: Error while calling dbmcli
"E:\sapdb\programs\pgm\dbmcli"-d NSP -u , db_online
============================= Start database failed!
After this I couldn't start the application server anymore via:
http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000
Internet Explorer cannot display the webpage
   Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
Has anybody suggestions??
Thanks,
Guido

Hi Kancho Kanchev,
It seems that the path in the shortcut "Start Application Server" or in the "startSystem.cmd" file is not matching your instalation.
1) Check the properties "Target" and "Start in" in the shortcut "Start Application Server" to see if the path's are compatible, below my installation:
Target = D:\SAP\NSP\SYS\exe\run\startSystem.cmd
Start in = D:\SAP\NSP\SYS\exe\run
2) Open the "startSystem.cmd" (use wordpad) and check the path's again.
D:\sapdb\NSP\db\pgm\dbmstart -d NSP
D:\SAP\NSP\SYS\exe\run\sapcontrol -prot PIPE -nr 00 -host . -function StartWait 180 10
3) If still dont work, you can execute each command manually (Start / Run / cmd - Change to same directory
where the file "startSystem.cmd" is). At least you will find out wich command is generating the error.
If you find out that the path is not matching you may have others problems, its possible that you installed
the software in especific drive (i.e. "C") but during installation informed a diferent one in the parameters ("D" or "E"..).
Hope it works and... suppose that "Mr. Guido Verbruggen" is the one who can offer the "10x" . Sry couldn't help you Guido...
Nice Weekend to all.

Similar Messages

  • The service name is invalid When starting the Database Control

    Dear Oracle Expert,
    I have installed Oracle database 11g on Windows Professional x64 Edition Version 2003 Service Pack 2..
    When I try to start the Database control after renaming the IP_address to the local machine name which is robert. It prompts back with an error.
    C:\>emctl status dbconsole
    Environment variable ORACLE_SID not defined. Please define it.
    C:\>set ORACLE_SID=ocp11g
    C:\>emctl status dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://192.168.1.67:1158/em/console/aboutApplication
    Oracle Enterprise Manager 11g is not running.
    C:\>emctl start dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    https://192.168.1.67:1158/em/console/aboutApplication
    Starting Oracle Enterprise Manager 11g Database Control ...The service name is i
    nvalid.
    More help is available by typing NET HELPMSG 2185.
    C:\>hostname
    robert
    C:\>emctl status dbconsole
    OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
    J_DBConsole_192.168.1.67_ocp11g not found.
    C:\>set ORACLE_SID=ocp11g
    C:\>emctl status dbconsole
    OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
    J_DBConsole_192.168.1.67_ocp11g not found.
    C:\>emctl start dbconsole
    OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
    J_DBConsole_192.168.1.67_ocp11g not found.
    C:\>SET ORACLE_HOME= C:\app\Administrator\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBC
    onsole_robert_ocp11g
    C:\>set ORACLE_SID=ocp11g
    C:\>emctl status dbconsole
    OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
    J_DBConsole_192.168.1.67_ocp11g not found.
    C:\>emctl start dbconsole
    OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
    J_DBConsole_192.168.1.67_ocp11g not found.
    C:\>
    Thanks in advance.
    Rlee

    Hello Oracle experts,
    I have to managed to Configure the Database Control by configuring a Microsoft Network adapter on my laptop but
    right now I can't access it within the URL.
    Tests of the running Database control include:
    C:\Documents and Settings\Administrator>emctl status dbconsole
    Environment variable ORACLE_SID not defined. Please define it.
    C:\Documents and Settings\Administrator>SET ORACLE_SID=ocp11
    C:\Documents and Settings\Administrator>emctl status dbconsole
    Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
    Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
    http://robert:1158/em/console/aboutApplication
    Oracle Enterprise Manager 11g is running.
    Logs are generated in directory C:\app\Administrator\product\11.1.0\db_2/robert_
    ocp11/sysman/log
    C:\Documents and Settings\Administrator>
    When I try to access the database control, I am un able to.
    The page cannot be found
    The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
    Please try the following:
    If you typed the page address in the Address bar, make sure that it is spelled correctly.
    Open the robert:1158 home page, and then look for links to the information you want.
    Click the Back button to try another link.
    Click Search to look for information on the Internet.
    HTTP 404 - File not found
    Internet Explorer
    Is this something related to Internet Explorer.
    Kindly rescue me out.
    Regards,
    RLee

  • Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

    Hi,
    We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
    Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service.  Possible causes include: the service is either not installed or the specified service name is invalid.
    Any help is much appreciated.
    Thanks

    Hello,
    The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
    Sean Gallardy | Blog |
    Twitter

  • Certutil -crl problems (the directory name is invalid)

    Another problem for you fine experts to consider...2 tier PKI, offline Root 2008 R2, 1 Sub Ent CA in Domain1 (2008 R2) and 1 Sub Ent CA in Domain2 (2012 R2).
    SubCA 1 and 2 are configured pretty much identically, however when setting up SubCA 2 I am having issues running the Certutil -CRL command to publish the CRL.
    My CDP locations are configured as follows;
    65:c:\WIndows\System32\CertSrv\CertEnroll\%3%8%9.crl
    79:ldap://CN=%7%8,CN=CDP,CN=Public Key Services,CN=Services,%6%10
    6:http://pki.domain2/CertEnrolment/%3%8%9.crl
    65:file://\\pki.domain2\CertEnrolment\%3%8%9.crl
    I can confirm that the base CRL publishes correctly to the CertEnroll location and LDAP correctly. But it fails trying to publish to the HTTP/File location (which is the same path).
    I get the error:
    CertUtil: -CRL command FAILED: 0x8007010b (WIN32/HTTP: 267 ERROR_DIRECTORY)
    CertUtil: The directory name is invalid
    Also the Delta CRL fails on the CertEnroll default directory as well as the file/http path with error;
    Active Directory Certificate Services could not publish a Delta CRL for key 0 to the following location: file://\\pki.domain\CertEnrolment\CANAME+.crl.
    Operation aborted 0x80004004 (-2147467260 E_ABORT)<o:p></o:p>
    I'm pretty certain it's not a permissions issue as I've added Everyone for NTFS/share permissions to test without any change. The install was done with an Enterprise
    Admin account but I'm doing all the testing now with a normal admin account (admin in the CA/server but not domain or enterprise admin).<o:p></o:p>
    <o:p></o:p>
    The File/HTTP location is on the CA itself (I know this is likely not best practise, but needs to be there in the short term) so not sure if the Windows firewall comes into play.
    Thanks!

    Hi driko,
    It's not a best practise to give Everyone NTFS/share permissions!
    What I suggest is you
    1. Create a dedicated folder f.e. "C:\Repository" on CA and share it only with permissions to specific account (see below)
    2. In CA publish CRLs to c:\WIndows\System32\CertSrv\CertEnroll\%3%8%9.crl
    only and create a task in task scheduler that will be running on the dedicated account and will copy c:\WIndows\System32\CertSrv\CertEnroll\*.crl
    to \\pki.domain2\Repozitory\*.crl 
    3. Make sure that account that is running this task on CA1 (Domain 1) has enough permissions for Repository share in Domain 2 (try running cmd as this user on
    CA1 and copy files manually to \\pki.domain2\Repository\)
    4. Map your http://pki.domain/CertEnrolment URL with IIS to physial C:\Repository\  folder path
    Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

  • How do I get a new value for the service name field and update it in Connection Properties?

    I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

    When you create a new film script, the first page you see is a title page.
    The page after this title page is the one where you generally type in your scenes.
    It looks like you are facing some issue and not able to delete any text.
    Can you please send me this script so that I can have a better look at your issue?
    You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
    Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
    Thanks

  • Error running javaws.exe  "The directory name is invalid"

    I am attempting to run a VPN client for Sabre. Once I installed their VPN client (installing JRE 1.5 + their custom icon) I am unable to successfully launch the VPN using the desktop icon as a power user in an active directory network environment, however as an admin it works fine.
    C:\Program Files\java\jre1.5.0_11\bin\javaws.exe "The Directory name is Invalid" <----Error message I get when I launch VPN.
    This is what the target location says - "C:\Program Files\Java\jre1.5.0_11\bin\javaws.exe" http://sabrevpn.sabre.com/vpnclient/sslvpn-tn.jnlp
    Now I have enabled access for our limited users by adding their group with modify access to the c:\program files\java folder and still I get this error. Any idea what this could be?!
    Thanks in advance.

    Hi,
    Thanks for your question.
    Can you access other websites?
    Did you use TMG 2010 and install SP1 on it? Did you configure HTTPS inspection?
    If yes, it may because TMG 2010 SP1 sends an empty client certificate to the web server during the initial Secure Sockets Layer handshake and
    you can refer to the KB below:
    http://support.microsoft.com/kb/2423401/en-us
    In addition, did you mean that the issue went away after you start Windows Firewall service? In general, Windows Firewall must be enabled on the computer where TMG operates. I am not sure if it is due to the Windows Firewall is not working.
    You can also check if Windows Firewall is enabled when you receive that error.
    Best regards,
    Susie

  • ORA-12154 TNS Could not resolve the service name

    I am working on Oracle 9i(Release 2) windows version. I want to change the value of
    shared pool size, buffer size and others database parameter through "Enterprise Manager Console" but
    when i connect to sysdba mode message comes "ORA-12154 TNS Could not resolve the service name".
    How can I solve this problem?

    these problem are you getting from OEM?
    post
    lsnrctl status
    lsnrctl services
    make sure database is running.. all the services running in services.msc
    check error code and start..
    ORA-12514:
         TNS:listener does not currently know of service requested in connect descriptor
    Cause:      The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a service name for a service (usually a database service) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
    Action:      
    - Wait a moment and try to connect a second time.
    - Check which services are currently known by the listener by executing: lsnrctl services <listener name>
    - Check that the SERVICE_NAME parameter in the connect descriptor of the net service name used specifies a service known by the listener.
    - If an easy connect naming connect identifier was used, check that the service name specified is a service known by the listener.
    - Check for an event in the listener.log file.

  • TMG Error Code 502 Proxy Error. The directory name is invalid. (267)

    Hi,
    I am having problem with a website in specific.
    Is showing the following error message.
    Error Code: 502 Proxy Error. The Directory name is invalid. (267)
    Server: TMG.personaldomain.local
    Source: web filter
    I have found no information in the logs to help identify the problem.
    I suspect that may be temporarily unavailable from the website. I enter the site without using the TMG and the same is responding.
    The problem is solved when I restart the service "Microsoft Forefront TMG Firewall"
    I suspect that may be cached in TMG that the site remains unavailable.
    Any idea?
    Tks.
    MCITP|Enterprise Administrator

    Hi,
    Thank you for the post.
    I did some research and found 267 error code may occur where the TMG tracing showed an issue accessing the Malware Temporary Storage directory which was resolved by changing the direction from C:\windows\temp directory
    to a custom directory. You could make this change as a pro-active step. Meanwhile, if you are running AV software on the TMG server, please also ensure you have reviewed the following article:
    http://technet.microsoft.com/library/cc707727.aspx
    Regards,
    Nick Gu - MSFT

  • ITunes v10.6.1.7 "Copying files failed. The File name was invalid or too long."

    I'm trying to organize my music files using iTunes 10.6.1.7 and I keep getting the error message "Copying files failed. The File name was invalid or too long."
    I've got music folders by artist in both the iTunes Music folder and the iTunes Media/Music folder. When I add certain files by drag/drop they sometimes get lost and I don't want that to happen anymore. I used to just consolidate my music files using the File/Library/Organize Library option and that worked, however now when I do that, I get the error message.
    I'm a novice and the only online stuff I see is both confusing and refers to earlier versions of iTunes.
    My concern is that I have heard that people lose entire libraries of their music when they trry to fix things like this and I don't want that. If this is of any importance, I have several files called iTunes library and temp library. I have no idea what that all means but I'm scared to death of it.
    Also, I can't get to the "re-organize library" link at all. It won't let me.
    One thing that be of some interest is that when I pull up the properties of the music and media/music files they are marked "read only" I'm also afraid to touch that!
    Please help and please know that I am a dummy. Be kind and be clear. Step by step would be great, with images even better. Thanks.

    Perhaps nobody knows the answer? We're fellow users here answering questions in our free time when we think we've something useful to contribute.
    You can choose to *Consolidate selected tracks* with a right-click menu. Perhaps if you can identify a specific track that won't consolidate and examine the full path to the file & the path that iTunes would create when it consolidates the problem might become apparent. For example iTunes may not be able to move files if the source or destination path length exceeds 255 characters.
    tt2

  • The itunes application could not be opened.  The file name was invalid or..

    ...too long.
    No idea when this started but cannot launch iTunes at all. To reiterate, when I try to launch iTunes I get the following error message: The itunes application could not be opened. The file name was invalid or too long.
    I actually uninstalled it and reinstalled on my external drive and it came back with the same error. Any ideas on how to troubleshoot what caused this? I am at my wits ends with this!

    I can't get mine to open at all. I even try clicking on a song to see if that will open it, nope. I have hooked up my iphone and ipods, nope. Click the icon, nope still nothing. It keeps erroring, but won't let me copy the error to put in here. I looked at the report it wants to send out, but there is nothing that says why it is erroring. Anyone else having this problem. Please email me at [email protected] to let me know what you did to solve it, or who I have to talk to to get it fixed... Thank you

  • "attempting to copy to the disk C:\ failed. the file name was invalid or...

    "attempting to copy to the disk C:\ failed. the file name was invalid or too long." This was the message that I keep getting after trying to "add folder to library" of multiple tracks from an external hard drive. it only happens after a certain period of time.. i get about half of my tracks added before this message pops up. when i first got my i pod it worked fine. but after i hooked up my i pod several times without having that external drive on... the i pod took over that drive letter that my external drive used to use. so.. when i turned on my external drive, it was given a new letter.. then i tunes would not recognize those 1500 tracks that came from my external drive (explanation points listed next to tracks). so.. I deleted all of those files manually, then tried to add folder to library again from the new letter coordinating to my external hd. I kept getting that message above. after that i deleted all files associated with i tunes.. and uninstalled i tunes.. then did a reinstall.. did i tunes update from site... and tried to just add the set of tracks from that external hd... still same **** error. only now.. after i say ok to error... i tunes continues for like 2 seconds.. then has to shut down... ****!!! can anyone help me with this... anyone?

    just to update my problem... I finally figured out that i had to disable the "copy to my itunes folder from my library option. just so you know. apparently i tunes cant handle the large transfer to itunes and also at the same time copy it to your itunes folder... APPLE fix this!!!!!! this suxxxxx....

  • Consolidate Problem. Copying files failed. The File name was invalid.

    Hi to everyone,
    My system is 10.5.8, iTunes 9.2.1 (4)
    I tried to consolidate my iTunes library to an external HD. After about 100GB of copied music, I got the message : Copying files failed. The File name was invalid.
    Now everytime I try again to consolidate, I get immediately this message. I am looking everywhere for a solution, and I only find the same problem for Windows iTunes users.
    Actually I found very useful this thread:
    http://discussions.apple.com/thread.jspa?threadID=1708372,
    which talks about with which order iTunes consolidates the media, so by digging a little in the folders to find which track has the problem and make the fix. It says that consolidate start copy the files by the date added order. So I can go in my new iTunes media folder and find the latest added track, then go back in iTunes, sort by date added the songs and locate the next song, to make the fix. However in my case, all previous and next songs (by date added), have been copied in the new locations.
    I am stuck. I have a remaining 300GB of music to consolidate and dont know how to proceed.
    Any help would be much appreciated..

    Finaly, I managed to solve it by myself...,
    following the help I found from the post of the thread I mentioned on my question...
    What was the problem that made things more difficult in my case, is that a big amount of songs have been added at the same time, with just a few seconds time distance. So it was tougher to locate what was the last imported song, and where iTunes consolidation had stopped. Actually I had groups of about 100 songs with the same timestamp of date added and the consolidation was following the rule of the "date added" but not exactly with the order the songs was showing in the iTuned library. So I started checking all the songs very close to the last added in the media folder one by one with the "show in finder" command, and then I managed to found what was the one with the problem.
    Regarding the problematic file, that was a midi file that had been imported in my iTunes.
    I hope this will help anyone else that might have the same problem as me in the future.

  • Itunes for WIN7: attempting to copy to disk "..." failed.  The file name was invalid or too long

    itunes for WIN7: attempting to copy to disk "..." failed.  The file name was invalid or too long
    help!!

    Max. path length is 255 characters, or perhaps there are some non-displaying characters hidden there. Try dropping a song you want to add to iTunes into the Automatically to iTunes folder to see if that works any better.
    tt2

  • HT1751 it says copying files failed. the file name was invalid or to long....anyone else have this problem?

    i am trying to move my songs to an external hard drive. after it copies for awhile it will pop up a screen that says....the file name was invalid or to long.....anyone else had this problem?

    What are you copying with? See this backup tip for a suggested method. If SyncToy can't copy a file it will carry on with the others and display a failure report at the end. Ideally you'll be copying the iTunes folder to the root of your external drive.
    tt2

  • HT1751 Consolidating files failed.  The file name was invalid or too long.  How to trouble shoot this?

    I am trying to move my iTunes library from old XP PC to Windows 7 PC, using an external hard drive.  Using tutorial and signed in as administrator.  Trying to consolidate my library and receive error message " Copying files fail. The file name was invalid or too long".    Don't know what to do as next step.   The library is sitting on the hard drive under the Administrator ID (My Documents\My Music\iTunes\iTunes Music).  
    Any thoughts?

    You can select a group of tracks and consolidate from the right-click context menu. You coud try consolidating in batches, say all songs by artists beginning with A, then B, etc, then the other media types, until you can isolate a problem track and then try moving that by hand and fixing the broken link.
    I also have two scripts that could help you, Unconsolidated and ConsolidateByMoving. The first can make a playlist of all unconsolidated tracks, the second can consolidate a selection of tracks by moving them instead of copying.
    tt2

Maybe you are looking for