The service name is invalid When starting the Database Control

Dear Oracle Expert,
I have installed Oracle database 11g on Windows Professional x64 Edition Version 2003 Service Pack 2..
When I try to start the Database control after renaming the IP_address to the local machine name which is robert. It prompts back with an error.
C:\>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.1.67:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
C:\>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://192.168.1.67:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The service name is i
nvalid.
More help is available by typing NET HELPMSG 2185.
C:\>hostname
robert
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>emctl start dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>SET ORACLE_HOME= C:\app\Administrator\product\11.1.0\db_1\oc4j\j2ee\OC4J_DBC
onsole_robert_ocp11g
C:\>set ORACLE_SID=ocp11g
C:\>emctl status dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>emctl start dbconsole
OC4J Configuration issue. C:\app\Administrator\product\11.1.0\db_1/oc4j/j2ee/OC4
J_DBConsole_192.168.1.67_ocp11g not found.
C:\>
Thanks in advance.
Rlee

Hello Oracle experts,
I have to managed to Configure the Database Control by configuring a Microsoft Network adapter on my laptop but
right now I can't access it within the URL.
Tests of the running Database control include:
C:\Documents and Settings\Administrator>emctl status dbconsole
Environment variable ORACLE_SID not defined. Please define it.
C:\Documents and Settings\Administrator>SET ORACLE_SID=ocp11
C:\Documents and Settings\Administrator>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
http://robert:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is running.
Logs are generated in directory C:\app\Administrator\product\11.1.0\db_2/robert_
ocp11/sysman/log
C:\Documents and Settings\Administrator>
When I try to access the database control, I am un able to.
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
If you typed the page address in the Address bar, make sure that it is spelled correctly.
Open the robert:1158 home page, and then look for links to the information you want.
Click the Back button to try another link.
Click Search to look for information on the Internet.
HTTP 404 - File not found
Internet Explorer
Is this something related to Internet Explorer.
Kindly rescue me out.
Regards,
RLee

Similar Messages

The service name is invalid (NET HELPMSG 2185)

I tried to install the SAP Netweaver 2004s ABAP Trial Version on my PC (Vista).
I went through the steps:
1) Install SAP Management Console (sapmmc\sapmmcX86u.msi)
2) Start the Installer (image\setup.exe)
3) Start Application Server by selecting Start Application Server
So far so good.
I even could start the application server via http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000. And use SAP.
Then I got on with Getting Started and installed SAP GUI.
They recommended me to stop the application server thru
Start u2013> Programs u2013> SAP NetWeaver 7.01 ABAP Trial Version u2013> NSP u2013> Stop Application Server
This is where the trouble started.
Since this point I get the following error everytime I try to start or stop the application server thru
Start u2013> Programs u2013> SAP NetWeaver 7.01 ABAP Trial Version u2013> NSP:
============================= Starting database instance ...
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24701,ERR_EXHNDLR: Could not initialize exception handler.
-24748,ERR_FILEOPEN: Error opening file E:\sapdb\data\wrk\dbmsrv_GORDITO-PC.err
-24826,ERR_NIERROR: Can not open file E:\sapdb\data\wrk\dbmsrv_GORDITO-PC.err''.
(system error 5; Access is denied.)
Error: Error while calling dbmcli
"E:\sapdb\programs\pgm\dbmcli"-d NSP -u , db_online
============================= Start database failed!
After this I couldn't start the application server anymore via:
http://localhost:8000/sap/bc/gui/sap/its/webgui?sap-client=000
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
Has anybody suggestions??
Thanks,
Guido

Hi Kancho Kanchev,
It seems that the path in the shortcut "Start Application Server" or in the "startSystem.cmd" file is not matching your instalation.
1) Check the properties "Target" and "Start in" in the shortcut "Start Application Server" to see if the path's are compatible, below my installation:
Target = D:\SAP\NSP\SYS\exe\run\startSystem.cmd
Start in = D:\SAP\NSP\SYS\exe\run
2) Open the "startSystem.cmd" (use wordpad) and check the path's again.
D:\sapdb\NSP\db\pgm\dbmstart -d NSP
D:\SAP\NSP\SYS\exe\run\sapcontrol -prot PIPE -nr 00 -host . -function StartWait 180 10
3) If still dont work, you can execute each command manually (Start / Run / cmd - Change to same directory
where the file "startSystem.cmd" is). At least you will find out wich command is generating the error.
If you find out that the path is not matching you may have others problems, its possible that you installed
the software in especific drive (i.e. "C") but during installation informed a diferent one in the parameters ("D" or "E"..).
Hope it works and... suppose that "Mr. Guido Verbruggen" is the one who can offer the "10x" . Sry couldn't help you Guido...
Nice Weekend to all.

The file name is invalid.

when I start iCal I get the message "The file name is invalid" I had the calanders syncing through dropbox so that my G5 and macbook air would be the same. and the iPhone just synced with the laptop... I wanted to sync with iCloud so I deleted the drop box folder they were loking for. The G5 finally restarted with a blank calander, no big deal. The Air just keeps thowing up the same message. I check the iCloud box for it but it will not stay checked. I have restarted a few times. I need to have the clander sart so I can add the iCloud account I think but i cannot get at the preferences.

Hi PG,
My Node has the following attributes:
Node
|_ FILENAME type string --> Binded to Filename Property
|_ CONTENT type rcf_attachment_content --> Data Property of the Upload UI Element.
Please check the below code, as the same is working for me with this logic.
IF lvfname IS NOT INITIAL.
*determine file name without path
    CALL FUNCTION 'TRINT_SPLIT_FILE_AND_PATH'
      EXPORTING
        full_name     = lvfname
      IMPORTING
        stripped_name = lv_stripped_name
        file_path     = lv_file_path
      EXCEPTIONS
        x_error       = 1
        OTHERS        = 2.
    IF sy-subrc = 0.
      IF NOT lv_stripped_name IS INITIAL.
        lvfname = lv_stripped_name.
      ENDIF.
    ELSE.
* Throw error
      lo_api_controller ?= wd_this->wd_get_api( ).
      CALL METHOD lo_api_controller->get_message_manager
        RECEIVING
          message_manager = lo_message_manager.
*     report message
      lo_msg = 'Please select proper file'.
      CALL METHOD lo_message_manager->report_t100_message
        EXPORTING
          msgid = '38'
          msgno = '000'
          msgty = 'E'
          p1    = lo_msg.
      EXIT.
    ENDIF.
At the same time, I've made use of the class cl_hrrcf_attachment_bl to maintain the attachments in my requirement.
Regards,
-Syed.

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Is it possible to have 2 instances with the same name but different edition in the same server?

Hi everybody!
I have in a little trouble ....
*** Scenario.
Oracle Enterprise Edition 11gr2 over Oracle Solaris 11
3 instances: PROD, QA, DEV
1 ASM instance
Listener ports: 1520, 1530 & 1540
           Those are production system
*** The problem:
Customer can't pay Oracle EE, they want to change to Oracle Std One
Limitations:
I cant have a similar system to test.
*** My idea:
Install Oracle Std One, in the same path:
/u01/app/oracle/product/11.2.0/db          <-- EE
/u01/app/oracle/product/11.2.0/db_one   <-- Std Ed One
ASM:
/u01/app/11.2.0/grid          <-- EE                    +ASM
/u01/app/11.2.0/grid_one   <-- Std Ed One        +ASM1
Create databases:
Asign similar disks to +ASM1
Create DGs on +ASM1
Create databases: PROD, QA, DEV for Std Ed one
- is it posible that they have same instance name?
- if not, i suppose create as: PROD1, QA1, DEV1
Configure Listener port : 1521, 1531 & 1541
Migration technique:
Create Tablespaces, schemas
Lock users in EE
down listener: 1520, 1530 & 1540
Import data of final users in a window maintanance
configure and up listener: 1521, 1531 & 1541
Customer should test access and apps in new
Please tell me if my Idea is reallistic, all comments are going to be very apreciated.

sol.beach
I suppose end customer use a port per database in order to separate in a logical way the access to the databases,
i mean PROD, QA & DEV has the same users.
Hemant K Chitale
1. I've seen physical servers with 3 ASM instances: +ASM1, +ASM2, +ASM3
   on Solaris & Oracle 10g, I suppose is posible on 11g
2. The sever has occupied 2 sockets (2 physical CPU), so I can use Oracle Standard Ed One.
JohnWatson2
Thanks for your comments.
WadhahDaouehi
1. - You cannot run two ASM instance simultaneously on one Server, but you can run many Oracle database simultaneously
      on the same server which they use the ASM as storage type.
As a mentioned to Hemant K Chitale, I've seen a system with several instances running
About
     "you can run many Oracle database simultaneously on the same server which they use the ASM as storage type."
I'm not sure if i can use the same ASM which is part of a current Enterprise Ed over the new installation with Oracle Std Ed One.
2. - Why you want the same instance name?
If it is about the service name, which has by default the same instance name, just you can create a different instance name
and create the service name with the name that you wish.
SQL> alter system set service_names='instance_name';
Is a similar name, not the same
PROD, QA & DEV
PROD1, QA1 & DEV1
I consider add "1" at the end to refer "Oracle Standar Ed One"
But I agree with you, i can customize throught service_name.
Regards,
Abraham Mtz.

Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.

Hi,
We have a cluster with 2 nodes. Everything works fine in Node1. When I try to failover TEST1 database to Node-2 it fails with this message.
Generic service 'Analysis Services (TEST1)' could not be brought online (with error '1060') during an attempt to open the service. Possible causes include: the service is either not installed or the specified service name is invalid.
Any help is much appreciated.
Thanks

Hello,
The error message is pretty straight forward, it's saying either the service isn't installed or it's not installed as the same service on that node. Did you install analysis services on the second node (from the error it seems like it isn't)?
Sean Gallardy | Blog |
Twitter

TS3212 I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message "Service 'Apple Mobile Device' failed to start, verify that you have sufficient Privileges to start

I receive a massage that a new version of ITunes was available (11.1.4). I proceeded to update, the download went ok but when installing the Message “Service ’Apple Mobile Device’ failed to start, verify that you have sufficient Privileges to start system Services”
On pressing retry I got the same message.
On pressing Ignore, I got the message “ITunes was not installed correctly, please reinstall ITunes – Error 7 – (windows error 126)
I reinstalled with the same error messages and the same results.
I uninstalled existing and reinstalled from scratch and the same error messages again.
I try to repair and at the end it said it had installed correctly – but when it tried to start I got the message “This application has failed to start because MSVCR80.dll was not found. Reinstalling the application may fix the problem” I now get the same message when I first start the computer but when I press ok I receive ““ITunes was not installed correctly; please reinstall ITunes – Error 7 – (windows error 126)” again.
It appears the update has not only corrupted the operating system (Xp Pro SP3) of my computer but I have no backups to my IPhone, my wife’s IPhone or the three others phones that use my computer.
I hope you can advise me how to recover my backups

Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy

"The file name was invalid or too long" appears when I try to copy music form a CD to my computer using Windoww XP

"The file name was invalid or too long" appears when I try to copy music from a CD to my compu
ter using Windows XP

Go to the songs view sorted as Album by Artist. Select, for example, the songs of artists whose names begin A-E. Right-click and click consolidate files. Assuming this group consolidate without error move on to another group, say F-J. If there is an error divide the original group into smaller chunks until you can isolate which tracks are causing a problem.
tt2

When I open iCal, I get the message 'The file name is invalid.' Can anyone tell me how to fix this?

When I open iCal, I get the message 'The file name is invalid.' Can anyone tell me how to fix this?

These latest Flash is corrupted. Adobe has acknowleged the problem. The following Adobe Forum message may be of help to you:
http://forums.adobe.com/message/6288150

HT203164 How do I fix a problem when downloading cd into iTunes, "the file name is invalid or too long"? I have never had this problem before until recently.

The message "the file name is invalid or too long" pops up when I try to download a cd onto iTunes. I never had this problem before but lately it has been happening. What can I do to fix this?

iPhoto Menu ->
Preferences ->
Accounts ->
Delete and recreate your email settings.
Alternatively, use Apple's Mail for the job. It has Templates too - and more of them.

Error running javaws.exe "The directory name is invalid"

I am attempting to run a VPN client for Sabre. Once I installed their VPN client (installing JRE 1.5 + their custom icon) I am unable to successfully launch the VPN using the desktop icon as a power user in an active directory network environment, however as an admin it works fine.
C:\Program Files\java\jre1.5.0_11\bin\javaws.exe "The Directory name is Invalid" <----Error message I get when I launch VPN.
This is what the target location says - "C:\Program Files\Java\jre1.5.0_11\bin\javaws.exe" http://sabrevpn.sabre.com/vpnclient/sslvpn-tn.jnlp
Now I have enabled access for our limited users by adding their group with modify access to the c:\program files\java folder and still I get this error. Any idea what this could be?!
Thanks in advance.

Hi,
Thanks for your question.
Can you access other websites?
Did you use TMG 2010 and install SP1 on it? Did you configure HTTPS inspection?
If yes, it may because TMG 2010 SP1 sends an empty client certificate to the web server during the initial Secure Sockets Layer handshake and
you can refer to the KB below:
http://support.microsoft.com/kb/2423401/en-us
In addition, did you mean that the issue went away after you start Windows Firewall service? In general, Windows Firewall must be enabled on the computer where TMG operates. I am not sure if it is due to the Windows Firewall is not working.
You can also check if Windows Firewall is enabled when you receive that error.
Best regards,
Susie

The itunes application could not be opened. The file name was invalid or..

...too long.
No idea when this started but cannot launch iTunes at all. To reiterate, when I try to launch iTunes I get the following error message: The itunes application could not be opened. The file name was invalid or too long.
I actually uninstalled it and reinstalled on my external drive and it came back with the same error. Any ideas on how to troubleshoot what caused this? I am at my wits ends with this!

I can't get mine to open at all. I even try clicking on a song to see if that will open it, nope. I have hooked up my iphone and ipods, nope. Click the icon, nope still nothing. It keeps erroring, but won't let me copy the error to put in here. I looked at the report it wants to send out, but there is nothing that says why it is erroring. Anyone else having this problem. Please email me at [email protected] to let me know what you did to solve it, or who I have to talk to to get it fixed... Thank you

Certutil -crl problems (the directory name is invalid)

Another problem for you fine experts to consider...2 tier PKI, offline Root 2008 R2, 1 Sub Ent CA in Domain1 (2008 R2) and 1 Sub Ent CA in Domain2 (2012 R2).
SubCA 1 and 2 are configured pretty much identically, however when setting up SubCA 2 I am having issues running the Certutil -CRL command to publish the CRL.
My CDP locations are configured as follows;
65:c:\WIndows\System32\CertSrv\CertEnroll\%3%8%9.crl
79:ldap://CN=%7%8,CN=CDP,CN=Public Key Services,CN=Services,%6%10
6:http://pki.domain2/CertEnrolment/%3%8%9.crl
65:file://\\pki.domain2\CertEnrolment\%3%8%9.crl
I can confirm that the base CRL publishes correctly to the CertEnroll location and LDAP correctly. But it fails trying to publish to the HTTP/File location (which is the same path).
I get the error:
CertUtil: -CRL command FAILED: 0x8007010b (WIN32/HTTP: 267 ERROR_DIRECTORY)
CertUtil: The directory name is invalid
Also the Delta CRL fails on the CertEnroll default directory as well as the file/http path with error;
Active Directory Certificate Services could not publish a Delta CRL for key 0 to the following location: file://\\pki.domain\CertEnrolment\CANAME+.crl.
Operation aborted 0x80004004 (-2147467260 E_ABORT)<o:p></o:p>
I'm pretty certain it's not a permissions issue as I've added Everyone for NTFS/share permissions to test without any change. The install was done with an Enterprise
Admin account but I'm doing all the testing now with a normal admin account (admin in the CA/server but not domain or enterprise admin).<o:p></o:p>
<o:p></o:p>
The File/HTTP location is on the CA itself (I know this is likely not best practise, but needs to be there in the short term) so not sure if the Windows firewall comes into play.
Thanks!

Hi driko,
It's not a best practise to give Everyone NTFS/share permissions!
What I suggest is you
1. Create a dedicated folder f.e. "C:\Repository" on CA and share it only with permissions to specific account (see below)
2. In CA publish CRLs to c:\WIndows\System32\CertSrv\CertEnroll\%3%8%9.crl
only and create a task in task scheduler that will be running on the dedicated account and will copy c:\WIndows\System32\CertSrv\CertEnroll\*.crl
to \\pki.domain2\Repozitory\*.crl
3. Make sure that account that is running this task on CA1 (Domain 1) has enough permissions for Repository share in Domain 2 (try running cmd as this user on
CA1 and copy files manually to \\pki.domain2\Repository\)
4. Map your http://pki.domain/CertEnrolment URL with IIS to physial C:\Repository\ folder path
Did my post help you or make you laugh? Don't forget to click the Helpful vote :) If I answered your question please mark my post as an Answer.

How do I get a new value for the service name field and update it in Connection Properties?

I am running Windows Vista. I just upgraded to Firefox 4. When I try to log on to the internet, it tells me the proxy server is refusing connections. A diagnostic reported Error 815 and said the remote server is not responding because there is an invalid value for the "Service Name" field. It said to get a new value and update it in Connection Properties. How do I do this?

When you create a new film script, the first page you see is a title page.
The page after this title page is the one where you generally type in your scenes.
It looks like you are facing some issue and not able to delete any text.
Can you please send me this script so that I can have a better look at your issue?
You can save this script to disk by using option 'File -> Save to disk'. This will create a '.stdoc' file on your system.
Just mail this '.stdoc' file to me at 'roverma <at> adobe <dot> com'
Thanks

ORA-12154 TNS Could not resolve the service name

I am working on Oracle 9i(Release 2) windows version. I want to change the value of
shared pool size, buffer size and others database parameter through "Enterprise Manager Console" but
when i connect to sysdba mode message comes "ORA-12154 TNS Could not resolve the service name".
How can I solve this problem?

these problem are you getting from OEM?
post
lsnrctl status
lsnrctl services
make sure database is running.. all the services running in services.msc
check error code and start..
ORA-12514:
     TNS:listener does not currently know of service requested in connect descriptor
Cause:      The listener received a request to establish a connection to a database or other service. The connect descriptor received by the listener specified a service name for a service (usually a database service) that either has not yet dynamically registered with the listener or has not been statically configured for the listener. This may be a temporary condition such as after the listener has started, but before the database instance has registered with the listener.
Action:
- Wait a moment and try to connect a second time.
- Check which services are currently known by the listener by executing: lsnrctl services <listener name>
- Check that the SERVICE_NAME parameter in the connect descriptor of the net service name used specifies a service known by the listener.
- If an easy connect naming connect identifier was used, check that the service name specified is a service known by the listener.
- Check for an event in the listener.log file.

The service name is invalid When starting the Database Control

Similar Messages

Maybe you are looking for