The services yes president St use only passed

I'm police officers and how to get the services yes president St use only passed I 1020 everybody in the county possible health service in the county government yeah there's more demand people is a alright so you need to cut the people themselves demanding Pure Testo Xplode besides their services will be provided then we also need to make hell me as major topic of discussion that we he has said should be delighted leading the HIV epidemic needed message and that his hand shows that a lot most now the earliest to understand that head message I think that lets you it is United States access shiny bentest yes that given is things that yet about did dissection today grass how yet and I know many mothers day actually was that helped a lot yes I will be doing then this is not what I love that song will me yeah so attendees hey don’t know let I'm is not schooled at this to know that listed into I listening to these lames is lead this leading because then his mother son the fact that units I S journalist .http://useexercisesupplements.com/pure-testo-xplode/

-Considering that these switches went eol in ’10 & end of SW maint release as of 7/31/13, can I consider the rev level that is prescribed in this post to be the final, definitive answer regarding the best & most current rev level for these 3750-48PS-e switches ? Or is there the possibilty that SE10 (or some other newer version) comes along & merits a rethink?
This is incorrect (and made worst with the poorly-worded EoL/EoS from Cisco). 12.2(55)SE EoL/EoS only affects platforms (2960, 3560 and 3750) with flash memory of 32 mb and above. Legacy 3560 and 3750 are NOT affected by announcement. And even if you have a 3560 or 3750 with 32 mb flash, I would steadfastly recommend 12.2(55)SE train than 15.0(1)SE, 15.0(2)SE or 15.2(1)E.
If your platform has 16 mb flash, then the "highest" IOS you can run is 12.2(55)SE. My personal recommendation is 12.2(55)SE8 or you could try the newer 12.2(55)SE9. I've got years of good experience with this particular version of IOS, 12.2(55)SE, and must admit this is one of the most stable version I've ever used (and I've used and tested a lot of versions). It's sad that Cisco no longer wants to run with this code.

Similar Messages

How to implement singleton service if i m using only jar and war component

hello,
in my application i m using only jar and war component .
as i m not using EAR for deployment so i dont have weblogic-application.xml file.
so in this case how i implement weblogic singleton service .and how to call active method

From the documentation:
After you have created a singleton service class using the SingletonService interface, you must define it as a singleton service within WebLogic Server. This singleton service object contains the following information:
The path to the class to load as the singleton service.
The preferred server and other candidate servers for the singleton service.
The following excerpt from the cluster element of config.xml shows how a singleton service is defined:
<singleton-service>
<name>SingletonTestServiceName</name>
<user-preferred-server>myManaged1</user-preferred-server>
<class-name>mycompany.myprogram.subpackage.SingletonTestServiceImpl</class-name>
<cluster>myCluster</cluster>
</singleton-service>
Note that the config.xml is located in the <domain-home>/config directory

I keep getting an error that says error occurred while trying to access the service. I am using windows 7

could someone please help

"access services"
This indicates use of an online service. Adobe has several online subscription services under acrobat.com.
The forum for those is at:
Document Cloud PDF services
Be well...

Hello my OS upgrade process was interrupted due to Internet failure, how may I re-try to upgrade it? I got a message that says I can´t, the serial number can be used only once!

Hello I bought a macbook pro on August this year and got a bonus to upgrade the OS from Lion to Mountain Lion for free. I started the donwload but it was interrupted due to internet failure so the upgrade process was aborted. When I tried to initiated the process again, I got a message that says I can not used the same serial number to download Maountain Lion. What can do in order to upgrade the OS using the "bonus" I received with the purchase?

I have the same problem, only Purchases in the App Store shows nothing. The download NEVER showed up in the App Store only in the Launchpad with a progress icon. The Icon said paused but when clicked, it just disappeared with no download.
How am I supposed to get my free upgrade now?

Can I change the HDL for the USRP N210 FPGA to use only I part of data, not I/Q

Hi all,
While using the USRP N210, we've run into a slight roadblock. We're using UHD's rx_samples_to_file and are able to receive at 20 Msps for 2 minutes using 8-bit complex integer (sc8) over-the-wire format without dropping any samples, but we'd like to receive at a faster data rate, preferably using 16-bit complex integers. We don't really need the Q part of the data, just the I part. So, in addition to using a faster hard drive for the computer and (if we have to) sacrificing half the data bits (using sc8 instead of sc16), we thought about altering the HDL code to only use the I part of the data to help us increase the data rate.
Is this even possible/plausible? How would you suggest going about accomplishing this? Ultimately, our goal is to receive at a faster data rate. Do you have any other ideas?
Thanks for your input

Hi mgarey,
While you may find some other UHD users in these forums who can help the best bet is probably to send your question to [email protected] since they are much more experienced in UHD troubleshooting. I don't think you'll be able to edit the FPGA itself but there may be a way to pull back just the I data, I can't say I've tried either one myself though.
Best Regards,
Peter W.
RF PSE

1013: The private attribute may be used only on class property definitions.

import com.doitflash.consts.Orientation;
import com.doitflash.consts.Easing;
import com.doitflash.events.ScrollEvent;
import com.doitflash.starling.utils.scroller.Scroller;
import starling.events.TouchEvent;
import starling.events.TouchPhase;
import starling.events.Touch;
import starling.extensions.ClippedSprite;
import flash.geom.Point;
var content:ClippedSprite = new ClippedSprite(); // the content you want to scroll
content.clipRect = new Rectangle(0, 0, 500, 500); // set the space that you want your content to be visible at, set its mask actually
content.addEventListener(TouchEvent.TOUCH, onTouch);
this.addChild(content);
var scroll:Scroller = new Scroller();
scroll.boundWidth = 500; // set boundWidth according to the mask width
scroll.boundHeight = 500; // set boundHeight according to the mask height
scroll.content = content; // you MUST set scroller content before doing anything else
scroll.orientation = Orientation.VERTICAL; // accepted values: Orientation.AUTO, Orientation.VERTICAL, Orientation.HORIZONTAL
// you call this function, to start scrolling
private function onTouch(e:TouchEvent):void
    var touch:Touch = e.getTouch(stage);
    var pos:Point = touch.getLocation(stage);
    if (touch.phase == TouchPhase.BEGAN)
        scroll.startScroll(pos); // on touch begin
    else if (touch.phase == TouchPhase.MOVED)
        scroll.startScroll(pos); // on touch move
        //trace(_scroll.isHoldAreaDone); // to see that we have got out of the hold area or not
    else if (touch.phase == TouchPhase.ENDED)
        scroll.fling(); // on touch ended
i got this error after pasting this code in.. i cant figure out the problem.. some help pls?

use:
import com.doitflash.consts.Orientation;
import com.doitflash.consts.Easing;
import com.doitflash.events.ScrollEvent;
import com.doitflash.starling.utils.scroller.Scroller;
import starling.events.TouchEvent;
import starling.events.TouchPhase;
import starling.events.Touch;
import starling.extensions.ClippedSprite;
import flash.geom.Point;
var content:ClippedSprite = new ClippedSprite(); // the content you want to scroll
content.clipRect = new Rectangle(0, 0, 500, 500); // set the space that you want your content to be visible at, set its mask actually
content.addEventListener(TouchEvent.TOUCH, onTouch);
this.addChild(content);
var scroll:Scroller = new Scroller();
scroll.boundWidth = 500; // set boundWidth according to the mask width
scroll.boundHeight = 500; // set boundHeight according to the mask height
scroll.content = content; // you MUST set scroller content before doing anything else
scroll.orientation = Orientation.VERTICAL; // accepted values: Orientation.AUTO, Orientation.VERTICAL, Orientation.HORIZONTAL
// you call this function, to start scrolling
function onTouch(e:TouchEvent):void
    var touch:Touch = e.getTouch(stage);
    var pos:Point = touch.getLocation(stage);
    if (touch.phase == TouchPhase.BEGAN)
        scroll.startScroll(pos); // on touch begin
    else if (touch.phase == TouchPhase.MOVED)
        scroll.startScroll(pos); // on touch move
        //trace(_scroll.isHoldAreaDone); // to see that we have got out of the hold area or not
    else if (touch.phase == TouchPhase.ENDED)
        scroll.fling(); // on touch ended

I have intermittent connectivity. Its a problem with the ipad not the service, i have checked using other ipads

I i am using Comcast Internet with router for Wi-Fi. I don't have problems with my computer or any other device just the iPad and the problem is intermittent. I have also tried to reset the modem and other things but nothing has worked to help the problem. the problem showed up about two weeks ago. Does this sound familiar?

I i am using Comcast Internet with router for Wi-Fi. I don't have problems with my computer or any other device just the iPad and the problem is intermittent. I have also tried to reset the modem and other things but nothing has worked to help the problem. the problem showed up about two weeks ago. Does this sound familiar?

Code 1013: The private attribute may be used only on class property definitions.

Ok guys, being new to the Action scripting game, I am already finding myself with Errors. I have researched this for the last few days, and each time I come up with an answered solution, the solution is always the curly bracket. But for the life of me, I can not find a missing bracket! Could someone look at this for me and guide me in the right direction before I lose the rest of my hair. :-)
package
import flash.display.Sprite;
import flash.events.MouseEvent;
public class Main extends Sprite
var xPos:int; //Stores the initial x position
var yPos:int; //Stores the initial y position
public function Main():void
addListeners(alpine,armadillo,battery,blizzard,cactus,carnivoreplant,cloud,coolfire,coral,crystal,dandelion,darkfire); //A function to add the listeners to the clips in the parameters
private function getPosition(target:Object):void
xPos = target.x;
yPos = target.y;
private function dragObject(e:MouseEvent):void
getPosition(e.target);
e.target.startDrag(true);
private function stopDragObject(e:MouseEvent):void
if (e.target.hitTestObject(getChildByName(e.target.name + "Target"))) //Checks the correct drop target
e.target.x = getChildByName(e.target.name + "Target").x; //If its correct, place the clip in the same position as the target
e.target.y = getChildByName(e.target.name + "Target").y;
else
e.target.x = xPos; //If not, return the clip to its original position
e.target.y = yPos;
e.target.stopDrag(); //Stop drag
private function addListeners(... objects):void
for (var i:int = 0; i < objects.length; i++)
objects[i].addEventListener(MouseEvent.MOUSE_DOWN, dragObject);
objects[i].addEventListener(MouseEvent.MOUSE_UP, stopDragObject);

Thank you for the reply Ned.
I took your advice and moved the Closing Bracket with this result in the coding change.
package
          import flash.display.Sprite;
          import flash.events.MouseEvent;
          public class Main extends Sprite
                    var xPos:int; //Stores the initial x position
                    var yPos:int; //Stores the initial y position
public function Main():void
                    addListeners(alpine,armadillo,battery,blizzard,cactus,carnivoreplant,cloud,coolfire,coral,crystal,dandelion,darkfire); //A function to add the listeners to the clips in the parameters
private function getPosition(target:Object):void
                    xPos = target.x;
                    yPos = target.y;
private function dragObject(e:MouseEvent):void
                    getPosition(e.target);
                    e.target.startDrag(true);
private function stopDragObject(e:MouseEvent):void
                    if (e.target.hitTestObject(getChildByName(e.target.name + "Target"))) //Checks the correct drop target
                                        e.target.x = getChildByName(e.target.name + "Target").x; //If its correct, place the clip in the same position as the target
                                        e.target.y = getChildByName(e.target.name + "Target").y;
                    else
                                        e.target.x = xPos; //If not, return the clip to its original position
                                        e.target.y = yPos;
                    e.target.stopDrag(); //Stop drag
private function addListeners(... objects):void
          for (var i:int = 0; i < objects.length; i++)
                              objects[i].addEventListener(MouseEvent.MOUSE_DOWN, dragObject);
                              objects[i].addEventListener(MouseEvent.MOUSE_UP, stopDragObject);
The 4 errors still remain on Line 14, 19, 25, and 40. All the same Error Code.

Error 1013: The private attribute may be used only on class property definitions

Been trying to solve this problem for the past 4 hours, been searching all over different forums and I still don't get it, I'm a complete newbie with AS3 and just starting to learn it. Can someone tell me what I have done wrong to get this error.
package {
          import flash.display.Sprite;
          import flash.events.Event;
          public class Main extends Sprite {
                    private const FIELD_WIDTH:uint=16;
                    private const FIELD_HEIGHT:uint=12;
                    private const TILE_SIZE:uint=40;
                    private var the_snake:the_snake_mc;
                    private var snakeDirection:uint;
                    private var snakeContainer:Sprite= new Sprite();
                    private var bg:bg_mc=new bg_mc();
                    public function Main() {
                              addChild(bg);
                              placeSnake(); }
                              addEventListener(Event.ENTER_FRAME,onEnterFr);
private function placeSnake():void {
          addChild(snakeContainer);
          var col:uint=Math.floor(Math.random()*(FIELD_WIDTH-10))+5;
          var row:uint=Math.floor(Math.random()*(FIELD_HEIGHT-10))+5;
          snakeDirection=Math.floor(Math.random()*4);
          the_snake=new the_snake_mc(col*TILE_SIZE,row*TILE_SIZE,snakeDirection+1);
          snakeContainer.addChild(the_snake);
          switch (snakeDirection) {
                    case 0 : // facing left
                    trace("left");
                    the_snake = new the_snake_mc((col+1)*TILE_SIZE,row*TILE_SIZE,6);
                    snakeContainer.addChild(the_snake);
                    the_snake = new the_snake_mc((col+2)*TILE_SIZE,row*TILE_SIZE,6);
                    snakeContainer.addChild(the_snake);
                    break;
                    case 1 : // facing up
                    trace ("up");
                    the_snake = new the_snake_mc(col*TILE_SIZE,(row+1)*TILE_SIZE,5);
                    snakeContainer.addChild(the_snake);
                    the_snake = new the_snake_mc(col*TILE_SIZE,(row+2)*TILE_SIZE,5);
                    snakeContainer.addChild(the_snake);
                    break;
                    case 2 : // facing down
                    trace ("down");
                    the_snake = new the_snake_mc((col-1)*TILE_SIZE.row*TILE_SIZE,6);
                    snakeContainer.addChild(the_snake);
                    the_snake = new the_snake_mc((col-2)*TILE_SIZE.row*TILE_SIZE,6);
                    snakeContainer.addChild(the_snake);
                    break
                    case 3 : // facing right
                    trace ("right");
                    the_snake = new the_snake_mc(col*TILE_SIZE,(row-1)*TILE_SIZE,5);
                    snakeContainer.addChild(the_snake);
                    the_snake = new the_snake_mc(col*TILE_SIZE,(row-2)*TILE_SIZE,5);
                    snakeContainer.addChild(the_snake);
                    break;
private function onEnterFr(e:Event) {     <<   ERROR ON THIS LINE
          var the_head:the_snake_mc=snakeContainer.addChildAt(0) as the_snake_mc;
          var new_piece:the_snake_mc=new the_snake_mc(the_head.x,the_head.y,1);
          snakeContainer.addChildAt(new_piece,1);
          var the_body:the_snake_mc=snakeContainer.getChildAt(2) as the_snake_mc;
          var p:uint=snakeContainer.numChildren;
          var the_tail:the_snake_mc=snakeContainer.getChildAt(p-1) as the_snake_mc;
          var the_new_tail:the_snake_mc=snakeContainer.getChildAt(p-2) as the_snake_mc;
          the_head.moveHead(snakeDirection,TILE_SIZE);
          // brute force
          if (is_up(new_piece,the_head)&&is_down(new_piece,the_body)) {
                    new_piece.gotoAndStop(5);
          if (is_down(new_piece,the_head)&&is_up(new_piece,the_body)) {
                    new_piece.gotoAndStop(5);
          if (is_left(new_piece,the_head)&&is_right(new_piece,the_body)) {
                    new_piece.gotoAndStop(6);
          if (is_right(new_piece,the_head)&&is_left(new_piece,the_body)) {
                    new_piece.gotoAndStop(6);
          // end of brute force
          snakeContainer.removeChild(the_tail);

does this solve your problem
package
          import flash.display.Sprite;
          import flash.events.Event;
          public class Main extends Sprite
                    private const FIELD_WIDTH:uint = 16;
                    private const FIELD_HEIGHT:uint = 12;
                    private const TILE_SIZE:uint = 40;
                    private var the_snake:the_snake_mc;
                    private var snakeDirection:uint;
                    private var snakeContainer:Sprite = new Sprite();
                    private var bg:bg_mc = new bg_mc();
                    public function Main()
                              addChild(bg);
                              placeSnake();
                              addEventListener(Event.ENTER_FRAME, onEnterFr);
                    private function placeSnake():void
                              addChild(snakeContainer);
                              var col:uint = Math.floor(Math.random() * (FIELD_WIDTH - 10)) + 5;
                              var row:uint = Math.floor(Math.random() * (FIELD_HEIGHT - 10)) + 5;
                              snakeDirection = Math.floor(Math.random() * 4);
                              the_snake = new the_snake_mc(col * TILE_SIZE, row * TILE_SIZE, snakeDirection + 1);
                              snakeContainer.addChild(the_snake);
                              switch (snakeDirection)
                                        case 0: // facing left
                                                  trace("left");
                                                  the_snake = new the_snake_mc((col + 1) * TILE_SIZE, row * TILE_SIZE, 6);
                                                  snakeContainer.addChild(the_snake);
                                                  the_snake = new the_snake_mc((col + 2) * TILE_SIZE, row * TILE_SIZE, 6);
                                                  snakeContainer.addChild(the_snake);
                                                  break;
                                        case 1: // facing up
                                                  trace("up");
                                                  the_snake = new the_snake_mc(col * TILE_SIZE, (row + 1) * TILE_SIZE, 5);
                                                  snakeContainer.addChild(the_snake);
                                                  the_snake = new the_snake_mc(col * TILE_SIZE, (row + 2) * TILE_SIZE, 5);
                                                  snakeContainer.addChild(the_snake);
                                                  break;
                                        case 2: // facing down
                                                  trace("down");
                                                  the_snake = new the_snake_mc((col - 1) * TILE_SIZE.row * TILE_SIZE, 6);
                                                  snakeContainer.addChild(the_snake);
                                                  the_snake = new the_snake_mc((col - 2) * TILE_SIZE.row * TILE_SIZE, 6);
                                                  snakeContainer.addChild(the_snake);
                                                  break;
                                        case 3: // facing right
                                                  trace("right");
                                                  the_snake = new the_snake_mc(col * TILE_SIZE, (row - 1) * TILE_SIZE, 5);
                                                  snakeContainer.addChild(the_snake);
                                                  the_snake = new the_snake_mc(col * TILE_SIZE, (row - 2) * TILE_SIZE, 5);
                                                  snakeContainer.addChild(the_snake);
                                                  break;
                    private function onEnterFr(e:Event)
                              var the_head:the_snake_mc = snakeContainer.addChildAt(0) as the_snake_mc;
                              var new_piece:the_snake_mc = new the_snake_mc(the_head.x, the_head.y, 1);
                              snakeContainer.addChildAt(new_piece, 1);
                              var the_body:the_snake_mc = snakeContainer.getChildAt(2) as the_snake_mc;
                              var p:uint = snakeContainer.numChildren;
                              var the_tail:the_snake_mc = snakeContainer.getChildAt(p - 1) as the_snake_mc;
                              var the_new_tail:the_snake_mc = snakeContainer.getChildAt(p - 2) as the_snake_mc;
                              the_head.moveHead(snakeDirection, TILE_SIZE);
                              // brute force
                              if (is_up(new_piece, the_head) && is_down(new_piece, the_body))
                                        new_piece.gotoAndStop(5);
                              if (is_down(new_piece, the_head) && is_up(new_piece, the_body))
                                        new_piece.gotoAndStop(5);
                              if (is_left(new_piece, the_head) && is_right(new_piece, the_body))
                                        new_piece.gotoAndStop(6);
                              if (is_right(new_piece, the_head) && is_left(new_piece, the_body))
                                        new_piece.gotoAndStop(6);
                              // end of brute force
                              snakeContainer.removeChild(the_tail);

Can i enhance a table via eewb for the service contract?

Hi, expert
I want to enhance a table for the service contract,
when i use eewb to do the enhancement, i find only the BUPA can do table enhancement.
Or i can create a tran. table and display the data via a table view on the web ui ,
but how to save the data of the table view when i click save button on the Web UI ?
Thanks.
Oliver.

FYI: Found the problem. In the Administrator's Guide (of course not in the supplied packages documentation about DBMS_JOB) I found:
"How Jobs Execute
SNP background processes execute jobs. To execute a job, the process creates a session to run the job.
When an SNP process runs a job, the job is run in the same environment in which it was submitted and with the owner's default privileges.
When you force a job to run using the procedure DBMS_JOB.RUN, the job is run by your user process. When your user process runs a job, it is run with your default privileges only. Privileges granted to you through roles are unavailable."
And of course we had set up our users to get all privileges through Roles, so CREATE TABLE wasn't one of my DEFAULT PRIVILEGES!
It sure would be nice if Oracle documentation could get its act together and provide ALL information about a topic in a logical place. The effort to find the information about privileges occurred after it took me 1/2 hour to figure out why my submissions were failing - I didn't have the ';' included in the quoted string for the procedure to be called - which I only figured out after looking at the code for DBMS_JOB where it made the note to make sure you include the ';'. Wouldn't it be good to have that MINOR DETAIL mentioned in the description of DBMS_JOB.SUBMIT?????

Alternative option to updating the services file on the local computer

Hi,
Our project needs to add updates to the file C:\windows\system32\drivers\etc\services in order to allow excel reports to work from the SAP enterprise portal.
The client will need to apply this change in the services file to all the desktop computers of the end-users. They are now asking whether there is an alternative solution to updating the services file on the local machine. Our team does not think that there is one but maybe one of you experts out there can provide some more insight.
Any help would be greatly appreciated.
Thanks.
Best Regards,
Giwan Persaud

For our normal sapgui rollout we never change the services file.
This is only possible if you change in saplogon.ini the MSSrvPort section, the names to numbers:
instead of
Item88=sapmsPS1
you use
Item88=3600
Then you don't need the services file ( excepte the standard ones which you can rollout once )
sapdp*
sapgw*
you to check if this works for Excel also!

Use Only Certified Plug-Ins - No effect when unchecking

General Preference>Application Startup: Use Only Certified Plug-Ins
The checkbox can be either selected or not - the Certified Mode indicates always YES. How can this be corrected? I neet to have Certified Mode set to NO
I'm using Acrobat X 10.1.2 as part of CS 5.5 on Windows 7
Thanks
Jo

Yes - I have restarted Adobe as well as the PC. I have double checked this settings on other Acrobat installations. All show exactly the same problems.
Unchecking “Use Only Certified Plug-Ins” has no effect. “Certified Mode” shows always YES.
Is this by design? Is this a bug?
Von: Bernd Alheit [email protected]
Gesendet: Mittwoch, 22. Februar 2012 17:39
An: Frei, Joerg
Betreff: Use Only Certified Plug-Ins - No effect when unchecking
Re: Use Only Certified Plug-Ins - No effect when unchecking
created by Bernd Alheit <http://forums.adobe.com/people/Bernd+Alheit> in Creating, Editing & Exporting PDFs - View the full discussion <http://forums.adobe.com/message/4222524#4222524

How request the service URL automatically?

Hi, Everyone,
How can I let the 79** serials phone auto request the service URL without user press the 'Services' button?
(Except using 'IDLE & IDLE Timeout')
BTW, base on this idea, i'm try to using the push2phone application (ASP) which is in CiscoIPService SDK, but i'm failed;
Trace the codes, i'm found the problem is in the 'getDeviceList()', see the symbol("-->") marked:
function getDeviceList(callManager, userID, password, protocol)
// [callManager: *.*.*.*] [UserID: "pusher"] [password: "pusher"] [protocol: "https"]
var authstring = text2base64(userID + ":" + password);
var xmlhttp = new ActiveXObject("Msxml2.XMLHTTP.3.0");
var xmlDoc = new ActiveXObject("Msxml2.FreeThreadedDOMDocument.3.0");
xmlDoc.async = false;
xmlhttp.Open("GET", protocol + "://" + callManager + "/CCMAdmin/Reports/devicelistx.asp", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Connection", "close");
--> xmlhttp.Send(); // Error occured
--> xmlDoc.loadXML(xmlhttp.responseText);
--> Application("deviceList") = xmlDoc; // Application("deviceList") is NULL

Hi, Remy, Thank you for your reply:)
About my CCM:
CCM System version: 4.1(3)
CCM Administration version: 4.1(0.11)
You say:
"You have to know taht since CCM 4.1.3 the devicelistx is no longer supported.
The page is always present but no longer supported by cisco. "
Is that meaning i cannot call the function 'getDeviceList()' in this CCM version and subsequent?!
(Yes, i can access the devicelistx.asp by: "https://*.*.*.*/ccmadmin/Reports/devicelistx.asp")
On the other hand, I try to call the 'phonepush()' directly, it looks like:
<%@ Language=JavaScript %>
<%
function phonePush(phoneIP, URI, userID, password)
// URI: Spec service URL, such as: http://*.*.*.*/CIP/index.asp
var authstring = text2base64(userID + ":" + password);
var xmlhttp = new ActiveXObject("Msxml2.XMLHTTP");
var pushxml;
pushxml = "";
pushxml = "XML=" + Server.URLEncode(pushxml);
xmlhttp.Open("POST", "http://" + phoneIP + "/CGI/Execute", false);
xmlhttp.setRequestHeader("Authorization", "Basic " + authstring);
xmlhttp.setRequestHeader("Connection", "close");
xmlhttp.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
xmlhttp.Send(pushxml);
return xmlhttp.responseText;
phonePush(phoneIP, URI, userID, password); // calling
%>
But it has not succeeded:( Is that can works well?! Or is there has anyway that can perform the automation?
Thanks!!!

ExportPDF - "an error occurred while trying to access the service"

I have never had a problem using ExportPDF in the past but recently I am getting an error message saying "an error occurred while trying to access the service". I am using the same browser, Chrome, that I have always used. Please tell me how to fix this.

Hi billbeaton,
Please log out, clear the browser cache, and then reload https://cloud.acrobat.com. If that doesn't work, please try logging in using a different web browser (simply as a test).
Has anything changed on your system since you were last able to log in to Acrobat.com? Are you using Mac OS or Windows?
Best,
Sara

Recover Vista 64-bit OS using only an external monitor

How can I use HP System Recovery to reinstall the Vista 64-bit OS using only an external monitor? Unfortunately the display on my HP Pavilion DV5-1000US is broken.

Thanks for suggesting use of BIOS messages as an indicator of recovery success using an external display. Currently all my BIOS messages go to the internal display, which is broken. Therefore, I do not know what information those messages present. How can I direct the BIOS messages to the external display?
I have located the HP Recovery Disks I made when the computer was purchased. Thanks for reminding me about them.
Regards,
Clyde

The services yes president St use only passed

Similar Messages

Maybe you are looking for