The setting print.print_printer is missing from my about:config in OS-X 10.8.4

Hi,
I can't print in Firefox. I started the troubleshooting process, but when it gets to resetting the print.print_printer option I can't because it doesn't exist in my about:config.
Is there anyway to fix this?

Hello pierrot_1972, the print.print_printer preference is missing in Firefox profiles where you've never used the printer !
can you check it in a [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#os=mac&browser=fx23 new profile] ?
thank you

Similar Messages

  • Print.print_printer does not appear in about:config

    Everytime I try to print from Firefox the printer hangs up. I read your HELP on resetting the print.print_printer in about:config. When I went to about:config there was no such entry. How do I add an entry and set it to the default settings?

    I also find there is no entry in the list for print.print_printer and that there are probably 60 configuration entries for my printer. When I try to print from FireFox the printer acts like it is receiving data, and then feeds a sheet of paper, but prints nothing at all. Printing of the same output from IE-8 works fine.
    My problem with the printer showed up about 2 days ago. To my knowledge, nobody changed any printer settings.

  • The Search field "print.print_printer" does not show in about:config. I cannot reset

    When I print from a selection from the web, half of the 1st line is missing. I have 2 printers: HP Officejet 5510 & HP Photosmart 7520. When I print from 5510, the page will also show the "address" at the top & the date/time & page number at the bottom. None of this happened until today.
    I have Windows 8
    When I print with the 7520, the address & the bottom part are barely printed.
    I reset the top margin to 1" from .5 that I had done yesterday when I doing some print jobs, but it did not change the parts that got cut off.
    I found a printer problem page on your site & the subject I listed is not available so I can attempt to reset Firefox.
    Thanks for your help

    Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
    You can try these free programs to scan for malware, which work with your existing antivirus software:
    * [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
    * [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
    * [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
    * [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
    * [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
    [http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
    Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
    Did this fix your problems?

  • MissingFieldException[ The following required field is missing from the lau

    Hi, I'm new to this forum so please put this thread in the right place if I have made a mistake.
    But here's my problem:
    I'm using jre 7 with the latest version.
    I downloaded and wanted to launch a Java based .jar game, which runs perfectly for the other users but my JRE gives the following error:
    Application error - unable to launch the application.
    MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
         at com.sun.javaws.jnl.XMLFormat.parse(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
         at com.sun.javaws.Main.launchApp(Unknown Source)
         at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
         at com.sun.javaws.Main.access$000(Unknown Source)
         at com.sun.javaws.Main$1.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    On the forum where is the game developed i got the following answer:
    ''+it seems your OS/jre installation tries to start the jar as an applet which fails, because it's a regular application and not an applet. is there any way you can convince your jre to start LS as an application? i would like to give better/more detailed advice, but i'm not running windows, so i can't check for myself/try to work out a step-by-step guide.+ ''
    As I have browsed the internet for hours and haven't come up with a solution I'm asking for some help.

    That error seems to indicate that the JNLP file is broken because it is missing the starting starting <jnlp> XML tag; I'll take a guess and just say that it is completely empty. Since it works for other users, apparently somehow when you download it on your computer you end up with a broken file. No idea why, no way for me to know why either. I don't have access to your computer. All I can say is: try in another browser and if that doesn't work, try on another computer. If it works there, well then you may have to face the fact that your computer might need a clean install.
    And PS: this is a Java programming forum, not technical support for whatever game you want to play that just happens to use Java.

  • How come the switch user option is missing from my lock screen?

    I upgrade to Lion my iMac Core 2 Duo and now when I lock the screen the switch user option is missing from the lock screen, you just have to cancel o renter as the original user, so that if another member of my family wants to switch and use the mac he or she cannot do it.
    This is what I am talking about (image taken from a lion review): http://dl.dropbox.com/u/134544/forum/Schermata%2007-2455766%20alle%2011.05.12.pn g
    The switch user option is totaly absent, I just have the cancel.
    It that a bug or what?
    Please note this happens only when I lock the screen from the screensaver, i.e. requesting the password to restart from the screensaver, if I get to the login windows all users appears correctly and people can switch back and forth.
    Thank you.
    –&#8232;cordialmente,
    tiziano solignani, da  Mac
    http://ts.solignani.it (splash)
    http://goo.gl/p6Sb0 (libri)

    I just talked to apple support.  They said Lion doesn't support this feature.  They gave me a work-around, which was to disable requiring a password in the screen saver.  Then enable user switching so it appears in the top right of the banner.  Note that since the screen saver no longer locks the screen, in order to actually lock the screen the user must click on the upper right user list and select something like "Login user...".
    This issue has left me disappointed with apple for a few reasons.  Hopefully someone at apple will take note:
    1. Apple removed a useful feature.
    2. Apple did not provide a response to this thread which would have been the best forum to inform users of this change.  It would have saved me and apple one long phone call.

  • Error: The following required field is missing from the launch file: jnlp

    PLEASE help me.
    I was at Starbuck's today trying to install new software for my new wireless internet card and when I finished I could no longer access any of my applications that require java... I have a macbook pro dual platform computer. When I try to access www.bayphoto.com to download my application it says: (see below) (which I think is strange because it's all about Starbuck's and it should be my java code- I think...). Like I said - I have no idea what's going on or how to fix this. Please help me or at least tell me whom to call- I feel so stupid- I just need help- ATT? Starbuck's? Sun?
    Error: The following required field is missing from the launch file: <jnlp>
    Under the "exceptions" tab it says:
    MissingFieldException[ The following required field is missing from the launch file: <jnlp>]
         at com.sun.javaws.jnl.XMLFormat.parse(XMLFormat.java:88)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:52)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:64)
         at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(LaunchDescFactory.java:72)
         at com.sun.javaws.Launcher.updateFinalLaunchDesc(Launcher.java:214)
         at com.sun.javaws.Launcher.prepareToLaunch(Launcher.java:127)
         at com.sun.javaws.Launcher.launch(Launcher.java:95)
         at com.sun.javaws.Main.launchApp(Main.java:305)
         at com.sun.javaws.Main.continueInSecureThread(Main.java:213)
         at com.sun.javaws.Main$1.run(Main.java:108)
         at java.lang.Thread.run(Thread.java:613)
    Under the "launch file tab" it says:
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" lang="en" xml:lang="en">
    <head>
    <title>AT&T Wi-Fi Service @ Starbucks</title>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <meta name="description" content="Starbucks Entertainment presented by AT&T Hotspot" />
    <meta name="keywords" content="AT&T, Starbucks, Wi-fi, Wifi, Hotspot, coffee, music, books, games, fresh sheet, third place, online" />
    <meta name="author" content="Starbucks Entertainment" />
    <link rel="shortcut icon" type="image/ico" href="/favicon.ico" />
    <script type="text/javascript" language="javascript" src="/dhtml/master.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_core.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_event.js"></script>
    <script type="text/javascript" language="javascript" src="/dhtml/x_xhr.js"></script>
    <script type="text/javascript" src="/dhtml/att/dhtml.js"></script>
    <style type="text/css">
    copied from starbucks master.css
    body {
         background:#200D06 url("/graphics/att/themes/sbux/hotspot_bkgd.jpg") repeat-x scroll;
         color:#555555;
         font-family:Arial,Helvetica,sans-serif;
         font-size:small;
         line-height:1.5em;
         margin:0pt;
         padding:0pt;
         text-align:center;
    #wrap {
         font-size:95%;
         margin:0pt auto;
         text-align:left;
         width:980px;
    #starbucksframe {
         margin:15px 0pt 0pt;
         padding:0pt;
    /*our addendae*/
    div#header {
         height:95px;
         width:980px;
         background-image:url("/graphics/att/themes/sbux/header_bg.jpg");
         background-repeat:no-repeat;
         margin:0px;
         background-top:0px;
         background-left:0px;
         background-color:transparent;
    div#btn_ctti {
         position:absolute;
         top:10px;
         margin-left:388px;
    div#sbux_lfrm {
         display:inline;
         font-size:10px;
         color:#FFFFFF;
         margin-left:245px;
         top:49px;
         position:absolute;
         line-height:10px;
         font-family:verdana,arial,helvetica,sans-serif;
    div#sbux_lfrm form {
         margin:0px;
    div#sbux_lfrm a, div#sbux_lfrm a:link, div#sbux_lfrm a:hover, div#sbux_lfrm a:active, div#sbux_lfrm a:hover {
         color:#FFFFFF;
    div#sbux_lfrm form label {
         display:none;
         visibility:hidden;
    div#sbux_lfrm form input, div#sbux_lfrm form select {
         font-family:verdana,arial,helvetica,sans-serif;
         vertical-align:middle;
    div#sbux_lfrm input.example {
         color:#656565;
    #sbux_lfrm_row1, #sbux_lfrm_row2 {
         margin:0px;
    #sbux_lfrm input#username, #sbux_lfrm input#password, #sbux_lfrm input#password_pw {
         width:136px;
         margin-right:6px;
         font-size:10px;
    #sbux_lfrm select#roamRealm {
         width:130px;
         font-size:10px;
         color:#656565;
         margin-right:6px;
    #sbux_lfrm_row2 {
         position:absolute;
         top:21px;
         left:-4px;
    div#aupAgree_row {
         margin-top:4px;
         position:relative;
         left:-4px;
    div#aup_box {
         float:left;
         position:relative;
         top:-3px;
    div#aup_text {
         float:left;
         line-height:10px;
    div#tm_badge {
         width:115px;
         height:94px;
         float:right;
         margin-right:0px;
         margin-top:0px;
    div#password_value {
         display:inline;
    div#hidden_pw_field {
         display:none;
         visibility:hidden;
    div#sbux_lfrm.css_form {
         margin-top:0px;
    </style>
    <style>
    /* IE specs */
    body {
         font-size: x-small; /* IE5 Win */
         voice-family: "\"}\"";
         voice-family: inherit;
         font-size: small;
    html>body { /* be nice to Opera */
         font-size: small;
    /* self-clearing floats
    /* trigger hasLayout and target ie5+6/win only */
    *:first-child+html #header,
    *:first-child+html #login_wrapper {
         height:95px;
    #ny_legal {
         color:#CAC3BF;
         font-size:11px;
         font-weight:bold;
         padding:0;
    #ny_legal a:link {
         color:#CAC3BF;
         font-size:11px;
         font-weight:bold;
         padding:0;
    </style>
    </html>
    TOO LONG TO INCLUDE ALL CODE

    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp codebase="file:///C:\eclipse\workspace\studentconverter\webroot" href="studentconverter.jar" >two things wrong here -
    first codebase is not legal URL, File.separator (backslash on windows) needs to be converted to forward slash in URL's.
    second, the href is not to the jnlp file, it is to the jar !
    href="studentconverter.jar" - should this be href="studentconverter.jnlp" ?
    /Dietz

  • The feature wifi hotspot is missing from my settings in my ipad ios 7. please give me a solution.

    the feature wifi hotspot is missing from my settings in my ipad ios 7. please give me a solution.

    First thing to do is to check with your cellular service provider to make sure that this feature is included with your cellular data Servoce contract.

  • "The EXCH provider section is missing from the Autodiscover response." On single mailbox

    We have a single mailbox with this issue, the RCA tool returns the message:
     The EXCH provider section is missing from the Autodiscover response.
    No other mailboxes have issues with Outlook anywhere but this one user is unable to use their mailbox from Outlook. I tried creating a fresh mailbox for this user and completely deleted the old one but this didn't seem to work. anyone have any ideas on how
    I can resolve this?
    This is Exchange 2010, SP1 with all update rollups applied.

    This workstation's network connectivity is okay. And a test with any other user account information from the same station is successful. I've tried this from both a domain and non-domain station with the same results. But this test was from a domain machine.
    Also note that our internal and external URIs are identical as the CAS server is the same for both.
    Here is the full RCA output.
    Testing RPC/HTTP connectivity.
     The RPC/HTTP test failed.
     Test Steps
     ExRCA is attempting to test Autodiscover for
    [email protected].
     Autodiscover was tested successfully.
     Test Steps
     Attempting each method of contacting the Autodiscover service.
     The Autodiscover service was tested successfully.
     Test Steps
     Attempting to test potential Autodiscover URL
    https://research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 140.254.87.75
    Testing TCP port 443 on host research.osu.edu to ensure it's listening and open.
     The specified port is either blocked, not listening, or not producing the expected response.
      Tell me more about this issue and how to resolve it
     Additional Details
     A network error occurred while communicating with the remote host.
    Attempting to test potential Autodiscover URL
    https://autodiscover.research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the HTTP redirect method.
     The attempt to contact Autodiscover using the HTTP Redirect method failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the DNS SRV redirect method.
     ExRCA successfully contacted the Autodiscover service using the DNS SRV redirect method.
     Test Steps
     Attempting to locate SRV record _autodiscover._tcp.research.osu.edu in DNS.
     The Autodiscover SRV record was successfully retrieved from DNS.
     Additional Details
     The Service Location (SRV) record lookup returned host mail.research.osu.edu.
    Attempting to test potential Autodiscover URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml
     Testing of the Autodiscover URL was successful.
     Test Steps
     Attempting to resolve the host name mail.research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 131.187.90.221
    Testing TCP port 443 on host mail.research.osu.edu to ensure it's listening and open.
     The port was opened successfully.
    Testing the SSL certificate to make sure it's valid.
     The certificate passed all validation requirements.
     Test Steps
     ExRCA is attempting to obtain the SSL certificate from remote server mail.research.osu.edu on port 443.
     ExRCA successfully obtained the remote SSL certificate.
     Additional Details
     Remote Certificate Subject: CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US, Issuer: CN=InCommon Server CA, OU=InCommon, O=Internet2, C=US.
    Validating the certificate name.
     The certificate name was validated successfully.
     Additional Details
     Host name mail.research.osu.edu was found in the Certificate Subject Common name.
    Certificate trust is being validated.
     The certificate is trusted and all certificates are present in the chain.
     Test Steps
     ExRCA is attempting to build certificate chains for certificate CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US.
     One or more certificate chains were constructed successfully.
     Additional Details
     A total of 1 chains were built. The highest quality chain ends in root certificate CN=AddTrust External CA Root, OU=AddTrust External TTP Network, O=AddTrust AB, C=SE.
    Analyzing the certificate chains for compatibility problems with versions of Windows.
     Potential compatibility problems were identified with some versions of Windows.
     Additional Details
     ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
    Testing the certificate date to confirm the certificate is valid.
     Date validation passed. The certificate hasn't expired.
     Additional Details
     The certificate is valid. NotBefore = 6/23/2011 12:00:00 AM, NotAfter = 6/22/2012 11:59:59 PM
    Checking the IIS configuration for client certificate authentication.
     Client certificate authentication wasn't detected.
     Additional Details
     Accept/Require Client Certificates isn't configured.
    Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
     ExRCA successfully retrieved Autodiscover settings by sending an Autodiscover POST.
     Test Steps
     ExRCA is attempting to retrieve an XML Autodiscover response from URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml for user
    [email protected].
     The Autodiscover XML response was successfully retrieved.
     Additional Details
     Autodiscover Account Settings
    XML response:
    <?xml version="1.0"?>
    <Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
    <DisplayName>Alba, Andrea</DisplayName>
    <LegacyDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Alba, Andrea</LegacyDN>
    <DeploymentId>75b2e554-1712-4be1-94e6-ed12513f8395</DeploymentId>
    </User>
    <Account>
    <AccountType>email</AccountType>
    <Action>settings</Action>
    <Protocol>
    <Type>WEB</Type>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <Internal>
    <OWAUrl AuthenticationMethod="Basic, Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    </Internal>
    <External>
    <OWAUrl AuthenticationMethod="Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    </External>
    </Protocol>
    </Account>
    </Response>
    </Autodiscover>
    Autodiscover settings for Outlook Anywhere are being validated.
     ExRCA wasn't able to validate Outlook Anywhere Autodiscover settings.
     Additional Details
     The EXCH provider section is missing from the Autodiscover response.
    And then a test with a different user:
    Testing RPC/HTTP connectivity.
     The RPC/HTTP test completed successfully.
     Test Steps
     ExRCA is attempting to test Autodiscover for
    [email protected].
     Autodiscover was tested successfully.
     Test Steps
     Attempting each method of contacting the Autodiscover service.
     The Autodiscover service was tested successfully.
     Test Steps
     Attempting to test potential Autodiscover URL
    https://research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 140.254.87.75
    Testing TCP port 443 on host research.osu.edu to ensure it's listening and open.
     The specified port is either blocked, not listening, or not producing the expected response.
      Tell me more about this issue and how to resolve it
     Additional Details
     A network error occurred while communicating with the remote host.
    Attempting to test potential Autodiscover URL
    https://autodiscover.research.osu.edu/AutoDiscover/AutoDiscover.xml
     Testing of this potential Autodiscover URL failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the HTTP redirect method.
     The attempt to contact Autodiscover using the HTTP Redirect method failed.
     Test Steps
     Attempting to resolve the host name autodiscover.research.osu.edu in DNS.
     The host name couldn't be resolved.
      Tell me more about this issue and how to resolve it
     Additional Details
     Host autodiscover.research.osu.edu couldn't be resolved in DNS InfoDomainNonexistent.
    Attempting to contact the Autodiscover service using the DNS SRV redirect method.
     ExRCA successfully contacted the Autodiscover service using the DNS SRV redirect method.
     Test Steps
     Attempting to locate SRV record _autodiscover._tcp.research.osu.edu in DNS.
     The Autodiscover SRV record was successfully retrieved from DNS.
     Additional Details
     The Service Location (SRV) record lookup returned host mail.research.osu.edu.
    Attempting to test potential Autodiscover URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml
     Testing of the Autodiscover URL was successful.
     Test Steps
     Attempting to resolve the host name mail.research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 131.187.90.221
    Testing TCP port 443 on host mail.research.osu.edu to ensure it's listening and open.
     The port was opened successfully.
    Testing the SSL certificate to make sure it's valid.
     The certificate passed all validation requirements.
     Test Steps
     ExRCA is attempting to obtain the SSL certificate from remote server mail.research.osu.edu on port 443.
     ExRCA successfully obtained the remote SSL certificate.
     Additional Details
     Remote Certificate Subject: CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US, Issuer: CN=InCommon Server CA, OU=InCommon, O=Internet2, C=US.
    Validating the certificate name.
     The certificate name was validated successfully.
     Additional Details
     Host name mail.research.osu.edu was found in the Certificate Subject Common name.
    Certificate trust is being validated.
     The certificate is trusted and all certificates are present in the chain.
     Test Steps
     ExRCA is attempting to build certificate chains for certificate CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US.
     One or more certificate chains were constructed successfully.
     Additional Details
     A total of 1 chains were built. The highest quality chain ends in root certificate CN=AddTrust External CA Root, OU=AddTrust External TTP Network, O=AddTrust AB, C=SE.
    Analyzing the certificate chains for compatibility problems with versions of Windows.
     Potential compatibility problems were identified with some versions of Windows.
     Additional Details
     ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
    Testing the certificate date to confirm the certificate is valid.
     Date validation passed. The certificate hasn't expired.
     Additional Details
     The certificate is valid. NotBefore = 6/23/2011 12:00:00 AM, NotAfter = 6/22/2012 11:59:59 PM
    Checking the IIS configuration for client certificate authentication.
     Client certificate authentication wasn't detected.
     Additional Details
     Accept/Require Client Certificates isn't configured.
    Attempting to send an Autodiscover POST request to potential Autodiscover URLs.
     ExRCA successfully retrieved Autodiscover settings by sending an Autodiscover POST.
     Test Steps
     ExRCA is attempting to retrieve an XML Autodiscover response from URL
    https://mail.research.osu.edu/Autodiscover/Autodiscover.xml for user
    [email protected].
     The Autodiscover XML response was successfully retrieved.
     Additional Details
     Autodiscover Account Settings
    XML response:
    <?xml version="1.0"?>
    <Autodiscover xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
    <Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
    <User>
    <DisplayName>Bossley, Peter A</DisplayName>
    <LegacyDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Bossley, Peter A</LegacyDN>
    <DeploymentId>75b2e554-1712-4be1-94e6-ed12513f8395</DeploymentId>
    </User>
    <Account>
    <AccountType>email</AccountType>
    <Action>settings</Action>
    <Protocol>
    <Type>EXCH</Type>
    <Server>MAIL.rf.ohio-state.edu</Server>
    <ServerDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MAIL</ServerDN>
    <ServerVersion>738180DA</ServerVersion>
    <MdbDN>/o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=MAIL/cn=Microsoft Private MDB</MdbDN>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    <OOFUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</OOFUrl>
    <OABUrl>https://mail.research.osu.edu/OAB/e5ee959b-e4f0-4bd3-b254-bc2f822455f6/</OABUrl>
    <UMUrl>https://mail.research.osu.edu/EWS/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <PublicFolderServer>MAIL.rf.ohio-state.edu</PublicFolderServer>
    <AD>DC3.rf.ohio-state.edu</AD>
    <EwsUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</EwsUrl>
    <EcpUrl>https://mail.research.osu.edu/ecp/</EcpUrl>
    <EcpUrl-um>?p=customize/voicemail.aspx&amp;exsvurl=1</EcpUrl-um>
    <EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;</EcpUrl-mt>
    <EcpUrl-ret>?p=organize/retentionpolicytags.slab&amp;exsvurl=1</EcpUrl-ret>
    <EcpUrl-sms>?p=sms/textmessaging.slab&amp;exsvurl=1</EcpUrl-sms>
    </Protocol>
    <Protocol>
    <Type>EXPR</Type>
    <Server>mail.research.osu.edu</Server>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    <OOFUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</OOFUrl>
    <OABUrl>https://mail.research.osu.edu/OAB/e5ee959b-e4f0-4bd3-b254-bc2f822455f6/</OABUrl>
    <UMUrl>https://mail.research.osu.edu/EWS/UM2007Legacy.asmx</UMUrl>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <SSL>On</SSL>
    <AuthPackage>Ntlm</AuthPackage>
    <EwsUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</EwsUrl>
    <EcpUrl>https://mail.research.osu.edu/ecp/</EcpUrl>
    <EcpUrl-um>?p=customize/voicemail.aspx&amp;exsvurl=1</EcpUrl-um>
    <EcpUrl-aggr>?p=personalsettings/EmailSubscriptions.slab&amp;exsvurl=1</EcpUrl-aggr>
    <EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?exsvurl=1&amp;IsOWA=&lt;IsOWA&gt;&amp;MsgID=&lt;MsgID&gt;&amp;Mbx=&lt;Mbx&gt;</EcpUrl-mt>
    <EcpUrl-ret>?p=organize/retentionpolicytags.slab&amp;exsvurl=1</EcpUrl-ret>
    <EcpUrl-sms>?p=sms/textmessaging.slab&amp;exsvurl=1</EcpUrl-sms>
    </Protocol>
    <Protocol>
    <Type>WEB</Type>
    <Port>0</Port>
    <DirectoryPort>0</DirectoryPort>
    <ReferralPort>0</ReferralPort>
    <Internal>
    <OWAUrl AuthenticationMethod="Basic, Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    <Protocol>
    <Type>EXCH</Type>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    </Protocol>
    </Internal>
    <External>
    <OWAUrl AuthenticationMethod="Fba">https://mail.research.osu.edu/owa/</OWAUrl>
    <Protocol>
    <Type>EXPR</Type>
    <ASUrl>https://mail.research.osu.edu/EWS/Exchange.asmx</ASUrl>
    </Protocol>
    </External>
    </Protocol>
    </Account>
    </Response>
    </Autodiscover>
    Autodiscover settings for Outlook Anywhere are being validated.
     ExRCA validated the Outlook Anywhere Autodiscover settings.
    Attempting to resolve the host name mail.research.osu.edu in DNS.
     The host name resolved successfully.
     Additional Details
     IP addresses returned: 131.187.90.221
    Testing TCP port 443 on host mail.research.osu.edu to ensure it's listening and open.
     The port was opened successfully.
    Testing the SSL certificate to make sure it's valid.
     The certificate passed all validation requirements.
     Test Steps
     ExRCA is attempting to obtain the SSL certificate from remote server mail.research.osu.edu on port 443.
     ExRCA successfully obtained the remote SSL certificate.
     Additional Details
     Remote Certificate Subject: CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US, Issuer: CN=InCommon Server CA, OU=InCommon, O=Internet2, C=US.
    Validating the certificate name.
     The certificate name was validated successfully.
     Additional Details
     Host name mail.research.osu.edu was found in the Certificate Subject Common name.
    Certificate trust is being validated.
     The certificate is trusted and all certificates are present in the chain.
     Test Steps
     ExRCA is attempting to build certificate chains for certificate CN=mail.research.osu.edu, OU=Office of Research, O=The Ohio State University, STREET=154 W 12th Avenue, L=Columbus, S=OH, PostalCode=43210, C=US.
     One or more certificate chains were constructed successfully.
     Additional Details
     A total of 1 chains were built. The highest quality chain ends in root certificate CN=AddTrust External CA Root, OU=AddTrust External TTP Network, O=AddTrust AB, C=SE.
    Analyzing the certificate chains for compatibility problems with versions of Windows.
     Potential compatibility problems were identified with some versions of Windows.
     Additional Details
     ExRCA can only validate the certificate chain using the Root Certificate Update functionality from Windows Update. Your certificate may not be trusted on Windows if the "Update Root Certificates" feature isn't enabled.
    Testing the certificate date to confirm the certificate is valid.
     Date validation passed. The certificate hasn't expired.
     Additional Details
     The certificate is valid. NotBefore = 6/23/2011 12:00:00 AM, NotAfter = 6/22/2012 11:59:59 PM
    Checking the IIS configuration for client certificate authentication.
     Client certificate authentication wasn't detected.
     Additional Details
     Accept/Require Client Certificates isn't configured.
    Testing HTTP Authentication Methods for URL
    https://mail.research.osu.edu/rpc/rpcproxy.dll.
     The HTTP authentication methods are correct.
     Additional Details
     ExRCA found all expected authentication methods and no disallowed methods. Methods found: Negotiate, NTLM
    Testing SSL mutual authentication with the RPC proxy server.
     Mutual authentication was verified successfully.
     Additional Details
     Certificate common name mail.research.osu.edu matches msstd:mail.research.osu.edu.
    Attempting to ping RPC proxy mail.research.osu.edu.
     RPC Proxy was pinged successfully.
     Additional Details
     Completed with HTTP status 200 - OK
    Attempting to ping RPC endpoint 6001 (Exchange Information Store) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 546 ms.
    Testing the Name Service Provider Interface (NSPI) on the Exchange Mailbox server.
     The NSPI interface was tested successfully.
     Test Steps
     Attempting to ping RPC endpoint 6004 (NSPI Proxy Interface) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 483 ms.
    Testing NSPI "Check Name" for user
    [email protected] against server MAIL.rf.ohio-state.edu.
     Check Name succeeded.
     Additional Details
     DisplayName: Bossley, Peter A, LegDN: /o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Bossley, Peter A
    Testing the Referral service on the Exchange Mailbox server.
     The Referral service was tested successfully.
     Test Steps
     Attempting to ping RPC endpoint 6002 (Referral Interface) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 492 ms.
    Attempting to perform referral for user /o=Research Foundation/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=Bossley, Peter A on server MAIL.rf.ohio-state.edu.
     ExRCA successfully got the referral.
     Additional Details
     The server returned by the Referral service: MAIL.rf.ohio-state.edu
    Testing the Exchange Information Store on the Mailbox server.
     ExRCA successfully tested the Information Store.
     Test Steps
     Attempting to ping RPC endpoint 6001 (Exchange Information Store) on server MAIL.rf.ohio-state.edu.
     The endpoint was pinged successfully.
     Additional Details
     RPC Status Ok (0) returned in 15 ms.
    Attempting to log on to the Exchange Information Store.
     ExRCA successfully logged on to the Information Store.
    Any other ideas?
    thanks!

  • Missing ADOBE ICONSHow can i get the icon of the pdf back ; its is missing from the desk adobe

    How can i get the icon of the pdf back ; its is missing from the desk adobe

    Often when people think they've deleted an application, what's really happened is that they deleted its icon from the Dock. In the Finder, select
    Go ▹ Applications
    from the menu bar, or press the key combination shift-command-A to open the Applications folder. If the application is in that folder, drag it to the Dock (not to the Desktop or anywhere else.) The other Dock icons will move out of the way to make a place for it.

  • Why are the movie and television icons missing from my Apple TV menu?

    Why are the movie and television icons missing from my Apple TV menu?

    likely because it does not have a working connection to the internet
    check the settings and maybe reenter the wifi pasword

  • Hi everyone!  I turned on my computer the other day and the icon for Safari was missing from my dock.  I looked in the applications folder and it is no longer there.  Does anyone know how I can get safari if I have no internet search engine?

    Hi everyone!  I turned on my computer the other day and the icon for Safari was missing from my dock.  I looked in the applications folder and it is no longer there.  Does anyone know how I can get safari if I have no internet search engine?  I

    Safari 5.0.6 for Leopard can be downloaded from here:
    http://support.apple.com/kb/DL1422
    Does anyone know how I can get safari if I have no internet search engine?
    How did you post here?

  • Print center is missing from my iPadSettings scree

    I am trying to delete print jobs from my iPad running the new IOs 8.  The User guide says hit the Home button twice, then tap on Print Center.  There is no Print Center.  Double tapping Home only brings up the open apps, and Print Center is not there.  What do I do?  I searched for that app but it is nowhere, not even in Settings.  Am I doing something wrong?  Or do I need to go see a Genius?  Thanks!  Matthew

    Hello pierrot_1972, the print.print_printer preference is missing in Firefox profiles where you've never used the printer !
    can you check it in a [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles#os=mac&browser=fx23 new profile] ?
    thank you

  • Scanner Actions & Printer Preference sections missing from Solutions Center

    I have just bought a Photosmart 6510 e All-in-one. I had no problem setting it up on my laptop and easily set it up on an old desktop PC. However I noticed in the HP Solutions Centre on the laptop that two sections are missing from this - 'Scanner Actions' and 'Printer Preferences'. The only sections appearing on the laptop's page are Web connected solutions, Shopping resources, Help & Support and Privacy Disclosures. However the missing sections both appear on my desktop PC's Solutions Center. How can I get them to appear on the laptop's Solutions Center?
    The Solutions Center I am referring to is the page that appears when I click on All Programs/ HP/ HP Photosmart 6510 Series/ HP Photosmart 6510 Series or the printer icon.
    Desktop PC -  Windows 7 Professional (32 Bit)
    Laptop - Windows 7 Home Premium (64 bit)
    EDIT: I have completely rewritten this post, including the title as I was using the wrong terminology so hopefully it now makes more sense and I can get an answer to my problem. Maybe even an expert one!
    Apologies in advance to moderators if I have done the wrong thing by rewriting this, sorry.
    This question was solved.
    View Solution.

    Hi,
    To clarify, HP solution center is utilized on prior models. The software title our newest models use when accessing via All Programs/ HP/ HP Photosmart 6510 Series/ HP Photosmart 6510 Series or the printer icon or the desktop icon is simply 'HP software'.
    First run the following utility and let me know what results you have
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=oj-96506-1&cc=us&dlc=en&lc=en&...=
    Make sure you have installed the printer with the latest software - a quick uninstall - All Programs/ HP/ HP Photosmart 6510 Series/ HP Photosmart 6510 Series- uninstall and reinstall using the link below will insure this
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-100190-1&cc=us&dlc=en&lc=en...=
    Do you have any anti-virus or 3rd party firewalls on the notebook? If so, what type and version info.
    thanks!
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • Print Preview is missing from Firefox 6 on Mac OSX Lion in both File Menu and Print Dialog Box

    The question says it all really. Print Preview option is missing from both the File menu and from the Print dialog box when you select Print. I use Print Preview a lot to avoid wasting paper.
    A relevant issue might be that the Mac OSX app Preview is currently having trouble with various printers including my Xerox and so, temporarily, the default application for all Preview items is now Adobe Reader until Apple get their act together. Perhaps this is affecting things?
    Thanks for any help

    It's moved to the PDF dropdown, "Open PDF in Preview"

  • Why is the "Send to iDVD" command missing from the share menu in iPhoto 9.4.3 when trying to send a slideshow to iDVD?

    How come the "Send to iDVD" command is missing from the share menu? In iPhoto I used to be able to send my slideshows to iDVD simply my clicking on the slideshow, selecting the "Share" menu at the top and going to "Send to iDVD". Now in iPhoto 9.4.3 that option is missing.
    Further i am also using iDVD 7.1.2 and running OSX version 10.8.3.
    Thanks!

    Export the slideshow via the Export button at the bottom of the slideshow window with Size = Medium or Large.
    Open iDVD, choose a theme and drag the exported movie file to the menu window being careful to avoid any drop zones.
    Follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

Maybe you are looking for