The Setup encountered an error(-1) during install. Please restart the machine and try again.
Hi
I've downloaded and installed the trial version of Indesign cs5.5 on a mac mini lion server just 2 weeks back.. Tried using the same nstaller on another mac mini with lion server and I got this error
The Setup encountered an error(-1) during install. Please restart the machine and try again.
I assumed that maybe I have to download the complete DMG on the machine I have to install on and so I downloaded it again but I still get the same error on installation..
Please help.. I need to get this runnin asap..
Can you check out the discussion here and see if it helps you? http://blogs.adobe.com/sarthak/2010/05/cs5_installation_issues.html
Similar Messages
-
I'm trying to update to CC (2014) and keep getting this message: "Installation Failed. Installation encountered an error. Please restart your system and try again. (15) I've done the restart, same problem.
Help!Hi stijill2,
In case you are facing issues uninstalling the app's then please try manual cleanup of Adobe from your machine by following the below mentioned steps:
1. Navigate to Applications and trash all Adobe app's and Adobe folder.
2. Navigate to Applications/Utilities/ and trash Adobe Application Manager,Adobe Creative Cloud, Adobe Installer folder.
3. Go to Library/Application Support and trash Adobe.
4.Go to ~/Library/Application Support and trash Adobe.
Try installing the CC app's and let us know if still the error persists.
Regards,
Romit Sinha -
Installation encountered an error please restart your system and try again 15
any one there to answer
WHAT error?
Please read, and answer as much as you can https://forums.adobe.com/thread/1499014
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
This has been my problem ever since. I haven't downloaded any app yet via computer. Help me guys.
Solved!
Go to Solution.Hi Lhea
Welcome to the Community
If you're using a Chrome or Firefox, I suggest you use Internet explorer for the meantime, once the plugin has been intalled on the browser, since Chrome and Internet explorer almost share the same settings, it should work well with Chrome after it.
Please leave a post if you have any further questions.
Ron
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter -
Any ideas on what to do, I have restarted my laptop several times. Your help would be greatly appreciated, Jay
Hi Mylenium,
My laptop is an Acer Aspire Ethos 8943G with an:
-Intel Core i7 1.6ghz QUAD Core 8 Threads
-16GB DR3 1333mhz Ram
-120GB Kingson V300 SSD Hard Drive
-750GB Storage Hard Drive
-AMD 5850 1GB Dedicated Graphics card with upto 4GB Shared Memory
Is there any other information you require?
Jay -
Grateful for help
Link for Download & Install & Setup & Activation problems may help
-Online Chat http://www.adobe.com/support/download-install/supportinfo/ -
Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?
Try disabling your firewall; both on your PC and the external Firewall/Router.
-
Hi all, My model is Sony Vaio SVF15213SNB. I had upgraded to windows 8.1 about a year ago from windows 8 using windows store. Recently i had issues with my Vaio and want to refresh back to windows 8. But when i tried to refresh using Assist key on my vaio, i get an error " driver where windows is installed is locked, please unlock the drive and try again" and i am unable to refresh. Is there any way i could refresh my Vaio? Sincerely, Nilesh Wagh
Hi NileshWagh,
Welcome to sony Community!
Here is the link on how to properly go back to factory setting. Please read and follow the steps carefully.
For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
Regards,
Jen
If my post answers your question, please mark it as "Accept as Solution" -
I installed viber on my iPhone 5s. After entering my number, it says:"
No Service
It seems to be a problem connecting to viber's service.please check your connection and try again"
Nevertheless I have connected to the internet.
Could you please help me?Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
Post Author: helpwithcr
CA Forum: General
" The syntax of the value for prompt 'p_phone_number' is incorrect. Please correct the syntax and try again."
I am getthing this error while I tried to pass the value from an oracle package to the web when the the crystal report viewer kicks in.
I found the source of the error. Its just a paranthesis that I used with the phone number inside the function.... The function looks like this
function phone_number
return varchar2
is
begin
return '(123) 456 - 789';
end phone_number;
I really dont want that paranthesis to go. Its the format that everyone wanted. But they dont want that to be static on the report also
Please help
Thanks
helpWithCrSir, you are a legend!!!
Many thanks for putting me on the right track...
Here's where I went wrong and how I fixed it.
First I installed the Azure Pack: MySQL Extension on the MySQL server.
This was wrong, it needs to be installed on the WAP server/s.
So I installed the extension on the WAP server and it still didn't work.
So I uninstalled the extension from the MySQL server and it still didn't work.
So I also installed the MySQL Connector/Net on the WAP server and it worked.
This eventually fixed it.
What I will say is that in the documentation it doesn't mention installing the MySQL Connector/Net from the web platform installer on the WAP server (unless I have completely missed this)?
Thanks again :-)
Microsoft Partner -
"The drive where windows is installed is locked. Unlock the drive and try again."
Have an Envy M6-K010DX notebook. Due to an internet problem while upgrading from Win 8 to 8.1, the PC doesn't properly boot and Windows Explorer won't load. Decided to 'Refresh' the OS and went to the F11 restore utilities. When I go to the refresh utility and follow the prompts I reach a message that says, "The drive where windows is installed is locked. Unlock the drive and try again." I've searched support for unlocking instructions and aside from some bootrec commands (that didn't work - probably because I don't have a Win 8 disk) not much is available.
The only access I have for running commands is via the Task Manager and F11 command prompt. What is this 'locked' drive, anyway? Does anyone have any information on this?
This question was solved.
View Solution.Its hard to say if it the data is accessable or if the file system is corrupted or not.
Recuva is a free utility to recover files that are missing due to deleting or reformatting.
Not all of the data will be recoverable now but perhaps most of it is.
If Recuva cannot detect anything, I doubt a paid program will do any better.
You can plug the old drive into a sata port on a desktop PC or you can purchase a usb adapter to use on another laptop.
If you go with a USB adapter, get one thats usb 3.O if possible.
Example: for notebook drives...http://www.newegg.com/Product/Product.aspx?Item=N82E16812161005 -
An error occurred while sending mail. The mail server responded: Administrative prohibition. Please check the message and try again.
Somtimes it says it spam also......The error message is being generated by your email provider's server. Best to ask them what they do not like about your messages and how to solve the problem.
-
Netflix keeps giving me the error: Whoops, something went wrong... Unexpected Error There was an unexpected error. Please reload the page and try again. Error Code: S7063-1417.
This is what Netflix has to say:
https://help.netflix.com/en/node/2417
Ciao. -
Camera Raw will not install on my mac,os 10.7.5. When I click on the install package the main install screen opens and that is as far as I can proceed with the down load. I have to force quit the software and try again. I have deleted and downloaded the software several times to no avail. I need some help.
Appreciate your help Ian and others. I have since uninstalled FCS and reinstalled FCXP only to get the same thing. Loading FCXP stalls at "Looking for Compressor Support". When I first downloaded FCXP from the App store I didn't notice that FCS was being placed in it's own folder. It's not something I did manually. Although moved into it's own folder with FCXP on the same drive. I was not able to open FCS apps. They would load and then "quit unexpectantly". They opened just fine before I downloaded FCXP. Do I need to purchase Compressor so that FCXP recognizes it? It seems this is where it stalls. It doesn't explain however why my computer "FREEZES" while doing this. I am in the process of re-installing Lion to see if this helps, otherwise I am at a complete loss.
-
When I try to launch the edit tab, I get a error message to close restart my computer and try again.
The editor saved prefs often get corrupted. This is because PSE saves your settings each time you close the application. Problems can sometimes occur if you don’t let the program close properly or if you launch another application too quickly whilst closing down Elements. You may need to rebuild the editor preferences to resolve any conflicts. To begin, close Elements.
Hold down the Ctrl+Shift+Alt keys and simultaneously click on the Edit button on the welcome screen. After a few seconds release the three keys and look behind the welcome screen by closing it. Alternatively hold down the three keys whilst clicking on the desktop icon for the Editor or PhotoshopElementsEditor.exe in the Programs folder. Keep holding down all three keys for a few seconds; then release. You should get the settings option.
When you see a pop up box with the words: Delete Adobe Photoshop Elements Settings File?
Click on Yes
Then wait whilst Elements rebuilds the preferences.
Maybe you are looking for
-
Can't find "Libraries" under Windows drop down menu in Adobe Illustrator CC on Mac?
I was searching forums to solve my issue (as stated in the subject) but could not figure out why I am unable to see "libraries" on my freshly updated Illustrator CC w/ Creative Cloud. I am attempting to use an image captured in Adobe Shape but am una
-
Can I set up AirportExpress for iPad2 without needing to use MacBook
I want to use my iPad2 with hotel Ethernet cable with out requiring my MacBook. Is a computer required to set up the AirPort Express or can it be done from iPad2
-
I installed the new firefox 4 browser today. In the description about the new app tab the following feature is claimed: "Links to new websites open in a new tab so that your App Tab doesn't change." This doesn's seem to work for me. When I click a li
-
Auto-Cad SAP integration interface development regard problem
I have just started working on development of Autocad SAP integration interface using VC++ I want to login into SAP environment by clicking on a logon Menu on a menu bar I want to get some idea as to how to start with this requirement. Can somebody
-
Assignment of a batch is required
Hi All , I am having problem while doing UD in QA32. It gives Error like ' Assignment of a batch is required '. As there is no batch selected for particular material. And Inspection lot is already conform in production order. How can i remove batch f