The setup process freezes when installing CS4 on OSX 10.7.5

It works right up until the time it actually begins the install.  The screen says "Currently installing Adobe Anchor service CS4".  It's the very beginning of the install, 0%.
I let it sit to see if it eventually would do something, but it sat overnight and is still in the same spot.  If I do a force quit it says not responding.  I'm not sure where to start the troubleshooting process.  Any help is much appreciated.

You will want to begin by reviewing your installation logs.  You can find details on how to accomplish this at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

Similar Messages

  • When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?

    When I plug my device into the computer for the first time the setup process doesn't begin. What do I do?

    Try to connect in recovery mode, explained in this article:
    iOS: Unable to update or restore
    Before that, back up your device, explained here:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    How to back up your data and set up as a new device
    You can check your warranty status here:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • The "find my iphone" app freeze when instaling

    The app freeze when installing and now i cannot delete it

    "Losing your iPhone feels lousy. Thankfully, iCloud can help you get it back. But if it looks like that’s not going to happen, new Find My iPhone features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it."
    http://www.apple.com/icloud/features/#fmip

  • The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6

    The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6
    Hi There,
    The subject header just about says it all. This is the first action I took with MAX - it is a fresh install. The file I wanted to save was still written and the FP seems to be working ok. However, I need to know what happened.
    I can't post the whole log file due to the amount of characters allowed on this post. I can cut and paste sections if there is a specific part of the file you need. Below is the first section and last section.
     Context where exception was caught:
    Func:
    CmxAggregateItemUI::InvokeCommand Args: plugin=niFPui.mxx Item=0107EAB1
    cmdID.cmdId={4A36174B-EC0C-4D73-A23D-F15D164542DE} cmdID.index=0
    Application   : C:\Program Files\National Instruments\MAX\NIMax.exe
    User Name     : slaney
    OS Version    : 5.1.2600 (Service Pack 3)
    Exception Code: C000001E
    Exception Addr: 457BC448
    Return Address: 457BC448
    Function Name : nNIFPServer::tFpLinearScaleRange::`vftable'
    Module Name   : FieldPoint71
    Parameters    : F001008E 7800FDDD C5100DFC EC0107EA
    Source File   : (not available)
    Return Address: 481000C3
    Function Name : (not available)
    Module Name   : (not available)
    Parameters    : 00000000 00000000 00000000 00000000
    Source File   : (not available) 

    Hi,
    I did a research on your error message and it seems this problem was introduced with MAX 4.6. This version switched to a new error reporting mechanism and reports even errors that are which are not critical to your task.
    These errors typically show up as "unexpected" and if your error falls into this category have a look to this KB for further assistance.
    If it doesn't fall into this category, your could try to go back to the MAX 4.5 or 4.4.. Of course you would need to reinstall some components and might not be able to use newer drivers at all.
    Let me know.
    DirkW

  • The FaceTime app on my iPod touch refuses to go any further than the email verification part of the setup process. It just goes back to the sign in screen every time. How can I fix this?

    My built in FaceTime app on my iPod touch will not proceed from the email verification step of the setup process. I have tried going into settings like app support showed but when I click FaceTime it just shows the sign in screen just like before and does the same thing. Please help me to fix this.

    See:
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting FaceTime

  • SQL Server 2012 installation failure An error occurred for a dependency of the feature causing the setup process for the feature to fail.

    I am installing SQL Server 2012 Developer (from ISO image written on DVD), my machine has Windows 7 (Edit: Windows 7 with service pack 1) on it. This machine already has SQL Express and SQL 2008 R2 Express installed in it.
    On running 2012 setup it goes fine from Setup Support Rules to Installation Progress. In  Installation Progress after some progress installation fails.
    Windows show the following components couldn't installed:
    Managment Tools Complete  Failed. Client Tools Connectivity Failed. Client Tools SDK Failed. Client Tools Backwards Compantibility Failed. Managment Tools Basic Failed. SQL Server Data Tools Failed. Reporting Services -Native Failed. Database Engine
    Services Failed. Data Quality Services Failed. full-Text and Semantic Extractins for Search Failed. SQL Server Replication Failed. Integration Services Failed. Analysis Services Failed. SQL Client Connectivity SDK Failed.
    In detail for failure of every component it provide these details:
    Action required:
    Use the following information to resolve the error, and then try the setup process again.
    Feature failure reason:
    An error occurred for a dependency of the feature causing the setup process for the feature to fail.
    In summary log file it provide the following details:
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2068643839
      Start time:                    2012-07-31 16:23:37
      End time:                      2012-07-31 16:33:32
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for Adv_SSMS:        Use the following information to resolve the error, and then try the setup process again.
      Next step for Conn:            Use the following information to resolve the error, and then try the setup process again.
      Next step for SDK:             Use the following information to resolve the error, and then try the setup process again.
      Next step for BC:              Use the following information to resolve the error, and then try the setup process again.
      Next step for SSMS:            Use the following information to resolve the error, and then try the setup process again.
      Next step for BIDS:            Use the following information to resolve the error, and then try the setup process again.
      Next step for RS:              Use the following information to resolve the error, and then try the setup process again.
      Next step for SQLEngine:       Use the following information to resolve the error, and then try the setup process again.
      Next step for DQ:              Use the following information to resolve the error, and then try the setup process again.
      Next step for FullText:        Use the following information to resolve the error, and then try the setup process again.
      Next step for Replication:     Use the following information to resolve the error, and then try the setup process again.
      Next step for IS:              Use the following information to resolve the error, and then try the setup process again.
      Next step for AS:              Use the following information to resolve the error, and then try the setup process again.
      Next step for SNAC_SDK:        Use the following information to resolve the error, and then try the setup process again.
    Machine Properties:
      Machine name:                  Haansi-PC
      Machine processor count:       4
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
      SQL Server 2005      SQLEXPRESS           MSSQL.1                       
    Database Engine Services                 1033                 Express Edition     
    9.4.5000        No        
      SQL Server 2005      SQLEXPRESS           MSSQL.1                       
    SQL Server Replication                   1033                 Express Edition     
    9.4.5000        No        
      SQL Server 2005      SQLEXPRESS           MSSQL.1                       
    SharedTools                              1033                
    Express Edition      9.4.5000        No        
      SQL Server 2005                                                         
    Tools                                    1033                
    Express Edition      9.4.5000        No        
      SQL Server 2005                                                         
    ToolsClient                              1033                
    Express Edition      9.4.5000        No        
      SQL Server 2005                                                         
    ToolsClient\Connectivity                 1033                 Express Edition     
    9.4.5000        No        
      SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    Database Engine Services                 1033                
    Express Edition      10.50.1617.0    No        
      SQL Server 2008 R2   SQLSERVER08EXPR2     MSSQL10_50.SQLSERVER08EXPR2    SQL Server Replication                   1033                
    Express Edition      10.50.1617.0    No        
      SQL Server 2008 R2                                                      
    Management Tools - Basic                 1033                 Express Edition     
    10.50.1617.0    No        
      SQL Server 2012                                                         
    LocalDB                                  1033                
    Express Edition      11.0.2318.0     No        
      SQL Server 2012                                                         
    Reporting Services - SharePoint                                                   
    11.0.2100.60    No        
    Package properties:
      Description:                   Microsoft SQL Server 2012
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      SPLevel:                       0
      Installation location:         F:\x64\setup\
      Installation edition:          Developer
    Product Update Status:
      None discovered.
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      false
      AGTSVCACCOUNT:                 NT Service\SQLAgent$SS2012
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Config
      ASDATADIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Data
      ASLOGDIR:                      C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  TABULAR
      ASSVCACCOUNT:                  NT Service\MSOLAP$SS2012
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Manual
      ASSYSADMINACCOUNTS:            PC\Haansi
      ASTEMPDIR:                     C:\Program Files\Microsoft SQL Server\MSAS11.SS2012\OLAP\Temp
      BROWSERSVCSTARTUPTYPE:         Automatic
      CLTCTLRNAME:                   <empty>
      CLTRESULTDIR:                  <empty>
      CLTSTARTUPTYPE:                0
      CLTSVCACCOUNT:                 <empty>
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 <empty>
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
      CTLRSTARTUPTYPE:               0
      CTLRSVCACCOUNT:                <empty>
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     <empty>
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                false
      FEATURES:                      SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, BIDS, CONN, IS, BC, SDK, SSMS, ADV_SSMS, SNAC_SDK
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  NT Service\MSSQLFDLauncher$SS2012
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    SS2012
      INSTANCENAME:                  SS2012
      ISSVCACCOUNT:                  NT Service\MsDtsServer110
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          <empty>
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              DefaultSharePointMode
      RSSVCACCOUNT:                  NT Service\ReportServer$SS2012
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Manual
      SAPWD:                         <empty>
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT Service\MSSQL$SS2012
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           Haansi-PC\Haansi
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  false
      TCPENABLED:                    0
      UIMODE:                        Normal
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\ConfigurationFile.ini
    Detailed results:
      Feature:                       Management Tools - Complete
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Client Tools Connectivity
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Client Tools SDK
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       SQL Server Data Tools
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Reporting Services - Native
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Data Quality Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Full-Text and Semantic Extractions for Search
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       SQL Server Replication
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Integration Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       Analysis Services
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Feature:                       SQL Client Connectivity SDK
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred during the setup process of the feature.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20120731_161013\SystemConfigurationCheck_Report.htm

    Please help. 
    I did what you suggested, but, still got error message to install SQL server data tools: Here is the log.
    Overall summary:
      Final result:                  Failed: see details below
      Exit code (Decimal):           -2068037632
      Start time:                    2014-09-29 15:05:38
      End time:                      2014-09-29 15:15:55
      Requested action:              Install
    Setup completed with required actions for features.
    Troubleshooting information for those features:
      Next step for SSDTBI_VS2012:   Use the following information to resolve the error, and then try the setup process again.
    Machine Properties:
      Machine name:                  MSBI
      Machine processor count:       4
      OS version:                    Future Windows Version
      OS service pack:               
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          32 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                    Feature                
                     Language             Edition              Version         Clustered  Configured
      SQL Server 2008                                                          Management Tools - Basic  
                  1033                 Express Edition      10.0.1600.22    No         Yes       
      SQL Server 2012      MSSQLSERVER          MSSQL11.MSSQLSERVER            Database Engine Services                 1033      
              Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012      MSSQLSERVER          MSSQL11.MSSQLSERVER            SQL Server Replication                   1033      
              Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012      MSSQLSERVER          MSSQL11.MSSQLSERVER            Full-Text and Semantic Extractions for Search 1033                
    Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012      MSSQLSERVER          MSSQL11.MSSQLSERVER            Data Quality Services                    1033    
                Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012      MSSQLSERVER          MSAS11.MSSQLSERVER             Analysis Services                        1033  
                  Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012      MSSQLSERVER          MSRS11.MSSQLSERVER             Reporting Services - Native              1033        
            Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          Management Tools - Basic  
                  1033                 Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          Management Tools - Complete  
               1033                 Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          Client Tools Connectivity  
                 1033                 Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          Client Tools Backwards Compatibility
        1033                 Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          Client Tools SDK      
                      1033                 Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          SQL Server Data Tools    
                   1033                 Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          Integration Services    
                    1033                 Enterprise Evaluation Edition 11.0.2100.60    No         Yes       
      SQL Server 2012                                                          Reporting Services - SharePoint
                                                       11.0.2100.60    No         Yes    
    Package properties:
      Description:                   Microsoft SQL Server 2012 Service Pack 1
      ProductName:                   SQL Server 2012
      Type:                          RTM
      Version:                       11
      Installation location:         C:\9f7a58aa5d6d76ffe6be968a4ad339f5\x86\setup\
      Installation edition:          Express
      Slipstream:                    True
      SP Level                       1
      Patch Level:                   11.1.3128.0
    Product Update Status:
      Success: KB 2674319, KB 2793634
    Product Updates Selected for Installation:
      Title:                         Service Pack 1
      Knowledge Based Article:       KB 2674319
      Version:                       11.1.3000.0
      Architecture:                  x86
      Language:                      1033
      Title:                         SQL Server 2012 SP1 GDR Product Update
      Knowledge Based Article:       KB 2793634
      Version:                       11.1.3128.0
      Architecture:                  x86
      Language:                      All
      Update Source:                 MU
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      true
      AGTSVCACCOUNT:                 <empty>
      AGTSVCPASSWORD:                <empty>
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSERVERMODE:                  MULTIDIMENSIONAL
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 <empty>
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CLTCTLRNAME:                   <empty>
      CLTRESULTDIR:                  <empty>
      CLTSTARTUPTYPE:                0
      CLTSVCACCOUNT:                 <empty>
      CLTSVCPASSWORD:                <empty>
      CLTWORKINGDIR:                 <empty>
      COMMFABRICENCRYPTION:          0
      COMMFABRICNETWORKLEVEL:        0
      COMMFABRICPORT:                0
      CONFIGURATIONFILE:             
      CTLRSTARTUPTYPE:               0
      CTLRSVCACCOUNT:                <empty>
      CTLRSVCPASSWORD:               <empty>
      CTLRUSERS:                     <empty>
      ENABLERANU:                    false
      ENU:                           true
      ERRORREPORTING:                true
      FEATURES:                      SSDTBI_VS2012, SNAC_SDK
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 <empty>
      HELP:                          false
      IACCEPTSQLSERVERLICENSETERMS:  true
      INDICATEPROGRESS:              false
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files (x86)\Microsoft SQL Server\
      INSTANCEID:                    <empty>
      INSTANCENAME:                  <empty>
      ISSVCACCOUNT:                  NT AUTHORITY\Network Service
      ISSVCPASSWORD:                 <empty>
      ISSVCSTARTUPTYPE:              Automatic
      MATRIXCMBRICKCOMMPORT:         0
      MATRIXCMSERVERNAME:            <empty>
      MATRIXNAME:                    <empty>
      NPENABLED:                     0
      PID:                           *****
      QUIET:                         false
      QUIETSIMPLE:                   false
      ROLE:                          AllFeatures_WithDefaults
      RSINSTALLMODE:                 DefaultNativeMode
      RSSHPINSTALLMODE:              DefaultSharePointMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 <empty>
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         <empty>
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 <empty>
      SQLSVCPASSWORD:                <empty>
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           <empty>
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  true
      TCPENABLED:                    0
      UIMODE:                        AutoAdvance
      UpdateEnabled:                 true
      UpdateSource:                  MU
      X86:                           false
      Configuration file:            C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\ConfigurationFile.ini
    Detailed results:
      Feature:                       SQL Server Data Tools - Business Intelligence for Visual Studio 2012
      Status:                        Failed: see logs for details
      Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
      Next Step:                     Use the following information to resolve the error, and then try the setup process again.
      Component name:                Microsoft Visual Studio Tools for Applications 2012
      Component error code:          0x80044000
      Component log file:            C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\VSTA2012_LangsSupport_Cpu32_1.log
      Error description:             VS Shell 2012 installation has failed with exit code -2147205120.
      Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3436.0&EvtType=VSTA2012_LangsSupport%40Install%400x-2147205120
      Feature:                       SQL Client Connectivity
      Status:                        Passed
      Feature:                       SQL Client Connectivity SDK
      Status:                        Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20140929_150412\SystemConfigurationCheck_Report.htm

  • Need help with BES 10 activation error: "Device activation can't be completed because the setup process or a training tutorial is running"

    Hi All,
    I am having a hard time finding any info on this activation error, and I really can't get to the bottom of it.  When I enter my companie's activation code for the BES 10 network, it gives me the following message:
    " Device activation can't be completed because the setup process or a training tutorial is running on your device.  Try again later."
    It would be nice if the msg could be a little more specific!  But anyway, I have tried all the traditional fixes, battery pulls, re&re to BES, etc. but still nothing.  My last option is to wipe and see if that works but curious to see if anyone has run into this before.
    PS I have a Z10 STL100-3
    Thanks in advance! 
    cheers

    Good. excellent solved service blackberry
    Thanks. aspataro
    Please thank those who help you by clicking the button.
    If your issue has been solved, please resolve it by marking "Accept as Solution"

  • WMP freezes when installing

    Hi
    I can download Windows Media Player and Stuffit expands it into 'Windows Media Installer' but then it always freezes when installing...gah...does anyone know anything about this?
    [I've read the other topics where people can't get it to expand, but this is different...no error messages or anything]
    Thanks!

    Impossible to answer with information  provided.
    Allan

  • Cannot install USB device, install wizard freezes when installing SiLib.sys

    Hello,
    I have installed LabView and all the software required for running a program for tremor evaluation. When I plug a TremorScope via USB connection it starts Hardware Installation wizard, but the installation does not complete and system freezes when installing SiLib.sys. The OS is Windows XP.
    Do you have any solution how to finish the installation or what is going wrong. Thank you for your help.

    Why don't you ask the vendor of the device? It does not have anything to do with LabVIEW.

  • Getting the "beach ball" freezes, when switched to Intel 330 120gb SSD in my blackbook (2006, C2D, 10.6.8)

    Getting the "beach ball" freezes, when switched to Intel 330 120gb SSD in my blackbook (2006, C2D, 10.6.8).
    But switching to Crucial M4 SSD, everything is just fine & great~
    Any genius, know why?
    Do I need to enable TRIM for Intel 330 SSD (Sandforce)?
    THX for help!!
    Info:
    MacBook (Black, 2006, C2D, GMA950, 4gb Ram, OSX 10.6.8)
    -Both tried clone OS & clean install OS

    I just installed a 120 GB 330-series Intel SSD in my late-2008 aluminum MacBook and I have experienced the beachball problem on a fresh install of Lion and a fresh install of Mountain Lion. I never saw this behavior with my old Western Digital 500 GB HDD. Does anyone have any suggestions about how to avoid the "freezes" associated with the 330-series SSDs?

  • I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshoo

    I have an issue installing photoshop CC trial, I currently have elements and wanted to see the differences before buying, when installing through the creative cloud app I get the error message  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DW041 ...   -------------------------------------- Summary --------------------------------------   - 0 fatal error(s), 1 error(s)
    ERROR: DW041: INSTALLDIR Volume D:\ doesn't exist.  -------------------------------------------------------------------------------------  System Requirements  and it will not install, It says cant find the path D: im not sure why because as far as I can see its set to install on drive C: which is where I want it!

    Exit Code: 6, Exit Code: 7 Installation Errors - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for information on how to review your installation logs

  • Please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

    please i am unable to restore my ipad due to error 3194.The restore process stalls when it gets to the point where the firmwarwe is being updated.error message 3194 comes up.please help me

    http://support.apple.com/kb/TS3694#error3194 
    Unable to contact the iOS software update server gs.apple.com

  • I've just upgraded my software to 10.8.5 and have discovered this morning that the autofill feature freezes when I try to use it.

    I've just upgraded my software to 10.8.5 and have discovered this morning that the autofill feature freezes when I try to use it. I have worked through all of the suggestions in HELP. The autofill prompt appears when I start to fill in a form but doesn't then provide the option box to select autofill from my contact card, the autofill prompt remains on the screen and can only be cleared by closing Safari and then reopening it. This never happened before and in fact autofill has been working perfectly up until now.

    You can create another iCloud account easily enough, but you will only be able to create a new @icloud.com address to go with it, not @me.com - and you can't transfer your @me.com address from the other account.Creating a new account will have no effect on the existing one.
    However you don't need to create a new iCloud account to create an additional ermail address. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
    More information on aliases here:
    http://help.apple.com/icloud/#mm6b1a490a
    While you can delete aliases, you cannot delete the address you created when you opened the account.

  • Hi, I did the 30-day trial of indesign, now I bought the student package and when installing it they ask me for my serial number and I didn't get any.. please help!!!

    Hi, I did the 30-day trial of indesign, now I bought the student package and when installing it they ask me for my serial number and I didn't get any.. please help!!!

    We have received your payment - thank you! For your information are the details of the order here:
    Ordering information:
    Creative Cloud membership Photo Student and Teacher Edition (one-year)
    74.00 DKK per. month
    Order number[Removed by moderator]
    18.50 DKK charges
    Total payment today:  
    92.50 DKK

  • How can i restore my documents from icloud on my iphone if i have already gone through the setup process??

    How can i restore my documents from icloud on my iphone if i have already gone through the setup process??

    Back to the beginning...
    What do you mean by "documents"?  Word or Pages files, spreadsheet files?
    Also, on your device, in Settings>iCloud, you have to have an on/off setting for Docments&amp;Data.  If not what kinds of entries do you have on that screen?

Maybe you are looking for