The Setup Wizard does not locate my G-Range Expander. PLEASE HELP!!!!

 I have encountered a problem. Can anyone help?
Today I purchased the Linksys Range Expander to boost my wireless internet signal (I currently am a verizon fios internet user). I used the CD that came in the package and plugged the expander into an outlet. First, the CD Setup Wizard prompts me to choose the internet signal to be expanded. I find my signal on the list, click it, and wait for the Wizard to "locate the G-Range Expander". After a few seconds, a box comes up on the screen reading "Wireless G-Range Expander not found. Make sure the expander is plugged in". I have reset the range expander and plugged it back in multiple times; however, nothing seems to help the wizard locate the expander (even though I am sitting very close to it). When I click on "find available internet signals" on my laptop, the linksys signal appears, even though the wizard does not find it but it is not usable. 
Please help the wizard locate my expander.  Thanks so much!! 

If you are trying to configure your WRE using the setup disk, you can exit from the setup and configure all the settings on your Router Manually...Follow the steps bellow.
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your Expander, wait for 30 seconds and re-connect the power cable...
1. Connect your Expander to a computer, click on the Start button >>> Settings >>> Control Panel >>> Network Connections - Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'-
Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0...Click on OK button to Save and Click on "Close" on main Properties window...
2. Now open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.240. Leave the Username blank & in Password use admin in lower case...It should open your
Expander set-up...
3. Once you get to the set-up page you can follow this link to change the Expander Settings...
NOTE : The link also explains to check the Wireless Settings on your Router...
4. While changing the Expander settings you have to make sure that the Wireless Settings(SSID/Network Name and WEP/WPA Key) are identical on both the devices(Router and Expander)...Also make sure to change the Expander's default IP to match your network and Gateway Address should be your Router's address...ex. Expander's IP Address : 192.168.1.240(assuming your router's default IP Address is 192.168.1.1), Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1...
5. After configuring the Expander you should disconnect it from the Computer and go into Local Area Connection TCP/IP Properties and set it back to Obtain IP Address Automatically...Disconnect the Expander from the computer and power cycle both the devices(Expander and Router)...Your Expander should be configured...
In case if you don't get the Expander set-up just leave it connected to your computer and reset it for 30 seconds and follow Step 2, Step 3, Step 4 & Step 5...
Hope this helps.

Similar Messages

  • I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I replaced the original hdd in my early 2008 iMac.  I can't move my files that were backed up with Time Machine to my new hdd using Migration Assistant.  When prompted to select the "from drive", the ext. hhd does not appears as a selection. Please help!!

    I'd recommend staring over, Pondini has created an excellent guide on how to use Setup Assistant. I'd recommend begin reading Pondini Setup Assistant tips where he talks about "Second Chance." Assuming your Time Machine backup is sound the restore  should be very smooth.
    Roger

  • What should I do if annemen the Macbook Pro does not want a USB stick? Please Help me?, What should I do if annemen the Macbook Pro does not want a USB stick? Please Help me?

    What should I do if annemen the Macbook Pro does not want a USB stick? Please Help me?, What should I do if annemen the Macbook Pro does not want a USB stick? Please Help me?

    What are you talking about? What is annemen? Clarify.

  • I updated firefox and now everything i click on below the tab bar does not work for any website! please help

    it was working fine before i updated to the new Firefox version 8. can i delete this version or can i fix this problem

    Do you have AVG Safe Search installed? It blocks use of the Enter key after typing in a search string.
    Disable it by clicking the Firefox button, go to Add-ons, then Extensions. You should be able to find it in there.

  • I purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

    i purchase Lightroom 6 upgrade and during installation the product won't download using the serial number provided. It then asks for serial number of previous installation (lightroom5) but does not recognise it once inserted. Please help!

    Yes, I have a TLP license, so which kind of upgrade should I buy?
    I'm an Italian user and I would prefer to contact support by web chat but I can't find it in the website, please can you help me? Thank you, I'm desperate!

  • Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    Good evening I would please help me, IGood evening I would please help me, I have problems with flash player when update on my computer Flash Player for windows 8, gives me error in the installation that is not apply on my computer. Please help. Thank You

    First, confirm that ActiveX Filtering is configured to allow Flash content:
    https://forums.adobe.com/thread/867968
    Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
    You can try to work around these issues by using Compatibility View:
    http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
    If that is too inconvenient, using Google Chrome may be a preferable alternative.

  • HT1719 my ipod shuffle wont sync, it says can not sync the required file can not be found??? please help.

    my ipod shuffle wont sync, it says can not sync the required file can not be found??? please help.

    if u can get your hands on a mac tis will work
    http://www.youtube.com/watch?v=vfnXjV9p0pA&feature=related

  • I used to have mobileme which never really worked properly, and now i would like to use Icloud which work with my Iphone and Ipad, however when i synch with my macbookpro, it does not synchronize properly. Can u please help me?

    I used to have mobileme which never really worked properly, and now i would like to use Icloud which work between my Iphone and Ipad, however when i synch with my macbookpro, it does not synchronize properly. Can u please help me?

    Thanks King_Penguin for taking time to read and reply. 
    I just purchased this movie on Thursday, May 15, so just a few days ago.  I have never had any trouble whatsoever since I have been in Vietnam.  I have downloaded several movies and even music and they have all synced to my respected Apple products except for this purchase. 
    Sorry, I don't quite understand what you mean by studios and different versions.  Could you please explain? 
    I checked my purchased list in my purchase history under my account and there are no hidden items. 

  • Setup Wizard does not exist on my 8700v... where is it hidden?!

    I have bought a second hand BB, previously on vodafone, currently on O2.  The getting started guide assumes I can find the setup wizard instantly.  Not only does it not appear automatically it is not in settings or any other place I have looked.  The front convenience button does not do anything, so doesn't help either.  I haven't set up anything on the phone, other than the time and registering it on the wireless network... setup wizard is the first port of call but can't get to it.  Any ideas??

    Hi there,
    It is possible that the previous user removed it (there are ways to do this) and then simply wiped the device before passing it on to you.
    If you need it, you can reload the OS using the steps located here:
    http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
    Or, you should be able to do everything without needing access to the Setup Wizard at all.  For example, all connection settings can be managed through Manage Connections app, keyboard settings and convenience key settings can be managed in the Options, and so on.
    If you want to reload the OS though, you can use the steps located in the above link.  The only catch is that you'll want to make sure you're using the OS for the original carrier (branded to Vodafone).
    I hope this info helps!
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • Huawei e3276 does not work on OSX 10.10 please help

    After I installed Yosemite Huawei e3276 does not work on OSX 10.10, please advise any work around for this issue - Thank you

    Found a very easy solution online.  Just download the software here and install. works immediately.
    http://translate.google.com/translate?hl=en&sl=sv&u=http://www.tre.se/privat/kun dservice/teknisk-support/Mobilt-bredband/Uppgradering-modemrouter/Yosemite/&prev =search

  • I uninstalled Firefox and now a setup wizard does not start when I re-download. 64 bit Windows 7

    My java stopped working, I reinstalled..Firefox still didn't recognize my java....I decided to reinstall Firefox and now when I download, Firefox will not open it's set up wizard it just extracts data and stops....grrrrrrrrr I run Windows 7 64bit Operating system

    Sorry you are having problems.
    Could it possibly be any security related software that is preventing this ?
    * http://kb.mozillazine.org/Installing_Firefox#Windows
    Make sure that you have an official copy of Firefox. Do a clean install BUT make sure you do not use any offer to remove personal data or you will destroy bookmarks and settings. If you have problems try to give the exact error messages so paste them into your reply of attach screen shots.
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #'''Windows:'''
    #*C:\Program Files\Mozilla Firefox
    #*C:\Program Files (x86)\Mozilla Firefox
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    <b>WARNING:</b> Do not run Firefox's uninstaller or use a third party remover as part of this process, because that could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These are difficult to recover unless they have been backed up to an external device!</u>
    Lets get Firefox installed then deal with any Java problem.
    * What is it that you need Java for ??
    <br /> see also http://kb.mozillazine.org/JavaScript_is_not_Java

  • Please help i am going off my mind when i connect my iphone 4 to my mac it tells me it can not be used because it requires 10.6.3 or later my mac is operating on 10.6.8 and my itunes is 10 .5 yet the iphone does not even show up in devices please help

    please help i am going off my mind since i updated my iphone 4 when i go to sync it tells me it can not be used as it requires 10.6.3 or higher
    my mac is running on 10.6.8 and i upgraded my itunes to 10.5 everything seems to be in place but the phone is not even being recognised in
    devices although it does come up in iphoto if anybody can help i would be very grateful.

    You have answered your own question:
    "requires 10.6.3 or higher"
    " i upgraded my itunes to 10.5 "
    You need itunes 10.6.3 or later.

  • I currently have Firefox 21.0. The 'Download Video' does not appear when I play videos. Help !

    Hello,
    I play a video in youtube. It plays fine. But I can not find the 'Download Video' button when I put my cursor over the video.
    Please help.
    Thanks.
    Mala

    If you are using Internet Download Manager, make sure that you are using latest version of IDM?
    * http://mirror2.internetdownloadmanager.com/idman615.exe?b=12
    make sure that '''IDM CC''' extension is enabled?
    * Go to Firefox/Tools>Addons>Extension and check if it enabled or not

  • I have an Apple Configurator install that wont recognize an iPad when I attach it via USB.  I cant prepare it or refresh it.  It was supervised.  I get an error message that says "policy does not have correct profile data".  Please help!!!

    I have an Apple Configurator install that wont recognize an iPad when I attach it via USB.  I cant prepare it or refresh it.  It was supervised.  I get an error message that says "policy does not have correct profile data".   At some point there was a mismatch between the profile on the iPad and the MAC server.  The profile on the MAC server has been deleted and the iPad has been erased and reset to default.  I need to be able to get Configurator to recognize this device to prepare it for deployment and issue Apps to it.   Please help!!

    Run the application 'Terminal.app' which you will find in '/Applications/Utilities' on your Macintosh.
    Type this into it: defaults delete com.apple.configurator PreprationSavedPolicyDefaultsKey
    Hit the return key.
    If you get no error message, it worked, and you can quit the app.

  • My iPhone 6 plus does not turn on landscape mode! please help!

    hi, so i just got my iPhone 6 plus today, i started playing with it and realized that the landscape mode doesn't work and tried messing with the settings but its not working. the little lock icon is not on and it still doesn't work! is my iPhone broke?

    I Have the same issue. Not only in home screen but in all apps...
    only nly after restarting the iPhone it works.
    I Also went to messages app, shake the phone to see if the "undo" appears, And it does... So looks like a software glitch

Maybe you are looking for

  • Reg. SAP Query

    Hi I have written an SAP Query for Selection Criteria. Example Scenario: I want to download list of sales orders in my BAPI. The download criteria is maintained as a SAP Query, like, Order Type, Creation Date, Plant etc. Can i invoke this query in my

  • AIR and Authentication

    The company I work for is thinking of ways to develop a desktop application that will download mp3 files for subscribers to there hard drives. The application needs to authenticate users before allowing download. Is this process possible using Adobe

  • Shockwave Flash 11.6.602.168 100% CPU usage

    Hi, Our computer has 100% CPU usage every time we get in websites that utilize Flash, or watch youtube. Browser: FF 19.0 Flash 11.6.602.168 Computer: HP Pentium 4, 2.8 GHz, 3G memory, up-to-date BIOS and other drivers. Graphic card: EVGA GeFprce 6200

  • Dem2vid - script to capture & encode nexuiz demos

    Simple script to encode a .dem to an aac/avc video. To produce a high quality mp4 simply specify the demo to encode in addition to your desired width & file size. If no file size is specified a VBR encode will be done.The demo file must be within you

  • What software gives me the .pdf on my computer, as opposed to just online?

    I want my pdf's to open on my cpu, not in my browser. When I save them, it only saves a link. What do I need to use? I have the 9.95/mo pdf creator plan.