The shadow copy of volume E: were aborted because the shadow copy storage failed to grow

Hello there, 
I am facing an issue regarding DPM 2010 backup. 
Every time my tape backup is being failed and the error is "The shadow copy of volume E: were aborted because the shadow copy storage failed to grow" .
My protected server is an win 2008R2 File server which is getting backed up from DPM 2010 server. 
The total space of E: is 700 GB out of which 750 MB space is free. 
So i am quite confused how much space should be free in protected server drive for successful backup.
It would be great if someone could help me regarding this matter. 
Thanks in advance.
Regards, Ishuv

Hello, 
Though it is written that minimum space required is 300 MB but i still do have 700 MB free out of 759 GB in my protected server drive (E:).
The error detail is ;
Source: Volsnap
Event ID: 35
Error General: "The Shadow copies of volume E: were aborted because the shadow copy storage failed to grow."
The backup server is DPM 2010 attached with IBM tape library which have LTO 5 cartridge.
Protected server is Win2k8R2 file server. 'E:' drive total space is 759 GB in which 700 MB is free.
So , as per my understanding from the error above is VSS is unable to grow because of limited free space in the specific E drive. In Drive (E:) there is only 700 MB space free. Now my question is how much free space should be there in the protected server
drive to complete the backup successfully by the DPM 2010 server which is storing the backups in IBM LTO5 tape library.
Is there someone who had faced this issue. Please help!!
Regards,
Ishuv
Regards, Ishuv

Similar Messages

  • [2008R2] Prevent event : The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time

    During the restore of data using VSS Snapshots it deleted all the snapshots, this event was written in the system log : 
    The shadow copies of volume D: were deleted because the shadow copy storage could not grow in time.  Consider reducing the IO load on the system or choose a shadow copy storage volume that is not being shadow copied.
    It only restored 20 GB of data and there should be plenty of space in the Shadow copy storage
    Used Shadow Copy Storage space: 2.692 GB (0%)
    Allocated Shadow Copy Storage space: 5.397 GB (0%)
    Maximum Shadow Copy Storage space: 694.752 GB (18%)
    When there isn't enough space it should start to delete the oldest snapshots to free up additional space, but it deleted
    all the snapshots. The problem is the IO but how to prevent this from happening again?

    Hi,
    Since the shadow copy storage space doesn’t run out, the issue could be due to the Volsnap.sys driver has encountered excessive I/O activity.
    You could refet to the article below to resolve the issue. This article is for Windows 2003 but it will also help on Windows 2008 R2 system.
    Error message when a Windows Server 2003-based computer has a high level of I/O activity: "The shadow copies of volume Volume_Name were aborted because the diff area file could not grow in time"
    http://support.microsoft.com/kb/925799
    Best Regards,
    Mandy 
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • HT1688 When I take pictures using the front camera the photo saves as if it were flipped in the opposite direct. How do I get it to saved as the picture was originally taken?

    When I take pictures using the front camera the photo saves as if it were flipped in the opposite direct. How do I get it to saved as the picture was originally taken?

    If you are talking about landscape pictures, hold the phone so the camera is at the top and the volume buttons on the bottom. If you hold it with the volume buttons on the top, the camera is upside down.

  • Operation has been aborted because the ISAGENT.SCA is missing

    I've come to the Setup Introscope Agent step of the installation, but am stopped with the message "Operation has been aborted because the ISAGENT.SCA is missing"
    It is saying that the Introscope Agent (ISAGENT.SCA) must first be downloaded from SAP Service Market Place and then delpoyed using the SDM. Please check Note 797147 for more details.
    I checked the note and I've already downloaded the files, unpacked them and observred that the new folders (wilyintroscope and wily) had been created.
    Are there any suggestions on how I can find and add the ISAGENT.SCA?
    Ken

    It turns out that the original SP must have been corrupted.
    I downloaded another copy of ISAGENTSMD8SP01_00-10007435.sca Uploaded it with JSPM, restarted the system and was good to go.
    Ken

  • I have a ! before most of the tracks in my library, they were not there before. When I click on the ! it says 'could not be used because the original file could not be found. Would you like to locate it?

    I have a ! before most of the tracks in my library, they were not there before. When I click on the ! it says 'could not be used because the original file could not be found. Would you like to locate it?

    Also see here for more help and information: iTunes: Finding lost media and downloads
    B-rock

  • HT3275 Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use? This has prevented my time machine from backing up from this morning (5th Dec 2012).

    Has anyone come across the red "i" message saying "The backup disk image "/Volumes/Chris...(the last bit being) iMac.sparsebundle" is already in use."?
    As of yesterday (4th Dec 2012) everything was fine, no trouble or problems at all. Wake up this morning, turn on the computer and when it came time to backup itself, the message occurred above and this has prevented my time machine from backing up from this morning (5th Dec 2012) ever since then.
    Everything on my computer is up-to-date but this problem still persists displaying this message practically every hour, on the hour and nothing is getting backedup!
    If you know what is going on and more importantly, how to fix this, I would be indebted to you for sharing your knowledge with me on this subject.
    Thank you.

    Welcome to the Apple Support Communities
    See > http://pondini.org/TM/C12.html

  • When opening a word doc in pages i am loosing the graphic images from powerpoint that were embedded in the word doc

    When opening a word doc in pages i am loosing the graphic images from powerpoint that were embedded in the word doc

    Are the images placed in a table? Many Word user have the habit of doing that. Tables are not handles the same way in Word and Pages so they get "hidden" in Pages. One way to find this out is to change the size of the paper of the document. You do that in the Page setup in the file menu. Create a document that is much longer that the default one and see if you images will pp up.

  • My screen says VPN connection you were disconnected because the ppp server is not responding try reconnecting.  When I hit "O.K." IPad shuts down.  Any suggestions, please?

    My screen says VPN connection you were disconnected because the PPP server is not responding.  Try reconnecting.  When I touch "O.K." screen goes dark after a couple of seconds.  Any ideas to solve this, please? 

    I have no solution. I am using Lion on Mac Air connecting to 3g using a Huawei 156 dongle modem and  i keep getting cut off with this message
    You were disconnected because the PPP server is not responding.
    I need a solution too

  • I get this alert when opening iPhoto.  "The photo "4ea09cdb.jpg" could not be opened, because the original item cannot be found." When I select "find photo" library is greyed out.

    I have to either hit cancel about 100 times to allow me to get into iphoto.  I think this may have to do with photos I have edited over time where the original no longer exists but only the .edited.jpg...
    OSX 10.8.2
    iPhoto 9.4.2

    these do not matchup - they can not all be correct
    Yes, I found the Masters file and they all appear to be there...
    Some of the files in question say "The alias “AtlantisPhoto_01_2.jpg” can’t be opened because the original item can’t be found."  when I try to access in the master file.
    It was checked when I went into preferences already.
    It sounds like you have unchecked the copy option sometime and imported photos while it was unchecked that no longer have the originals available on the same path as they were when imported
    We only know what you tell us and answers can only be based on the information you provide
    And whjile you are looking inside the iPhoto library be very careful that you do not make any changes of any sort - there are no user servicable parts in it and any changes can destroy your library
    LN

  • "The photo "EGY_7895.jpg" could not be opened, because the original item cannot be found"

    I'm getting the following message when I click on any photo in my most recent import: "The photo “xxx.jpg” could not be opened, because the original item cannot be found". The thumbnails are in iphoto but it dosen't seems to reconize the files when I try to go in to edit. I have iphoto version 8.1.2. Help please.

    Are you running a Managed or a Referenced Library?
    A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
    A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management. 
    It sounds like this batch of photos were imported as Referenced.
    Regards
    TD

  • The song...could not be used because the original file could not be located

    I just used Garageband this past Sunday, no problem...I open it up tonight and I get this message:
    "The song...could not be used because the original file could not be located."
    I click the OK button and it comes up with another song title, and I have clicked it 20 or 30 times already and it keeps coming up and I can't access anything else and it is frustrating!
    Anyone know how to stop the madness?!
    iMac 2.7 GHz Intel Core i5, 8 GB RAM, 1 TB HD, OS X 10.9.3
    Garageband 10.0.2

    "The song...could not be used because the original file could not be located."
    GarageBAnd cannot find the recorded media or imported audio files, that should be in the Media folder inside your project.
    Crtl-click the GarageBand icon in the Dock and use Force-quit to quit your current project.
    Then ctrl-click the .band file of your current project and select  "Show package contents." open the Media folder inside and check if all recorded media and imported audio files are there and you can play them.
    Have you moved your project or has it been transferred by mail?
    If the media are missing or do not play, there is not much you can do. If all media are there, repair the permissions of the project. If it is on an external drive, move it to your system drive and try there.
    If you cannot rescue the project, copy the media file out of the project, so you can use the recordings to recreate the song.You can launch GarageBand into the file "recent songs" panel to create a new project or to pick a recent project, by holding down  the alt/options key while double-clicking the GarageBand icon.

  • Iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

    iphoto wont open,keep getting Alert:The photo IMG_3515.jpg could not be opened,because the original item cannot be found. It opened fine two days ago. Any suggestions? iPhoto 9.3.2

    No changes were made. I saw in one of the threads where someone said to repair the database(which didn't work) or Rebuild the database(which did work). Thanks to one all for the support.
    WP

  • The action (restore User State) has been skipped because the condition is evaluated to be false.

    Hello,
    At one time my OSD Task Sequence captured network settings and User state (documents, settings, etc) from a refreshed system (same pc), but now it doesn't.  In Task sequence I am getting "The action (restore User State) has been skipped because
    the condition is evaluated to be false."
    ==============================[ OSDSetupHook.exe ]============================== OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
    Executing task sequence OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
    Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat". OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
    Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912} OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
    Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03} OSDSetupHook 3/31/2015 8:55:47 AM 1288 (0x0508)
    Debug shell is enabled OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Successfully enabled debug command shell support. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Configuring local administrator account OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Re-assign all drive letters... OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    The drive information which has no drive letter can not be found. No need to re-assign driver letters. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Installing SMS client OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Client already installed. OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Moving logs to SMS client directory OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Successfully moved logs to SMS client log directory: C:\WINDOWS\CCM\Logs\SMSTSLog OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Executing task sequence manager bootstrap OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    Executing command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:6 OSDSetupHook 3/31/2015 8:55:50 AM 1288 (0x0508)
    ==============================[ TSMBootStrap.exe ]============================== TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:6 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Current OS version is 6.1.7601.1 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Logging successfully initialized. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Resuming Task Sequence in Full OS TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    We are going in GINA and potentially need to set the authenticator TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    ==========[ TsProgressUI started in process 1952 ]========== TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
    Command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
    Registering COM classes TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
    sbModulePath = C:\WINDOWS\CCM\TsProgressUI.exe TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
    Unregistering class objects TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
    Shutdown complete. TsProgressUI 3/31/2015 8:55:50 AM 2016 (0x07E0)
    Process completed with exit code 0 TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Successfully registered TS Progress UI. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Found network adapter "Intel(R) Dual Band Wireless-AC 7260" with IP Address 0.0.0.0. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Found network adapter "Intel(R) Ethernet Connection I218-LM" with IP Address 169.254.45.132. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Starting Task Sequence Manager. TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    executing TS Manager not in full media TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    executing TS Manager in c:\windows\ccm TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Executing command line: "TsManager.exe" TSMBootstrap 3/31/2015 8:55:50 AM 1976 (0x07B8)
    Successfully intialized Logging for TS Manager. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Commandline: "TsManager.exe" TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    /service parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    /standalone parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    /noclient parameter found at index: -1 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Successfully registered Task Sequencing COM Interface. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Executing as a standalone exe TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Initializing TS Environment TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Opening Task Sequencing Environment TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    pwszPath && *pwszPath, HRESULT=80070057 (e:\qfe\nts\sms\framework\tscore\resolvesource.cpp,228) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Path variable OSDisk converted from 28A047320000401F00000000: to C: TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    NOT executing in WinPE TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling Config policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling config policies... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling SysHealthConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    ::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Decompression (zlib) succeeded: original size 684, uncompressed size 4648. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling SoftUpdConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    ::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Decompression (zlib) succeeded: original size 1926, uncompressed size 19238. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling SoftDistClientConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    ::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Decompression (zlib) succeeded: original size 1331, uncompressed size 13736. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling NAAConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    ::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Decompression (zlib) succeeded: original size 1026, uncompressed size 6490. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling RebootSettingsConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    ::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Decompression (zlib) succeeded: original size 433, uncompressed size 1554. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Compiling AppManClientConfig policy... TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    ::DecompressBuffer(65536) TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Decompression (zlib) succeeded: original size 983, uncompressed size 6354. TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Start to compile TS policy TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    End TS policy compilation TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Get Install Directory for SMS Client TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    RequestedConfig policy instance(s) : 436 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015
    8:55:50 AM 1624 (0x0658)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:FSC successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:FSC") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015 8:55:50
    AM 1624 (0x0658)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:FSC successfully TSManager 3/31/2015 8:55:50 AM 1624 (0x0658)
    RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015 8:55:51
    AM 1624 (0x0658)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    RequestedConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    RequestedConfig policy instance(s) : 9 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    RequestedConfig policy instance(s) : 42 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine") TSManager 3/31/2015
    8:55:51 AM 1624 (0x0658)
    There is no ccm_policy_policy instance, skipping addition to realinst map TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Total RequestedConfig policy instance(s) : 487 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    New/Changed ActualConfig policy instance(s) : 0 TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Policy evaluation initiated TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace  TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'  TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'  TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace TSManager 3/31/2015 8:55:51 AM 1624 (0x0658)
    Query = 'CCM_SoftwareDistributionClient
    Thanks in Advance,
    Mark

    You need to determine why USMTLOCAL is being set to "True". . .
    It is set to Not Equal to True. 
    Evaluating a variable condition expression TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    Variable = OSDStateStorePath TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    Value =  TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    Operator = exists TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    Expand a string: exists TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    Expand a string: OSDStateStorePath TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    Expand a string:  TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    The variable condition expression is evaluated to be FALSE TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    The AND expression is evaluated to be FALSE TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)
    The action (Restore User State) has been skipped because the condition is evaluated to be false TSManager 3/31/2015 8:56:23 AM 1624 (0x0658)

  • The photo "IMG_0005.JPG" could not be opened, because the original item can

    OK so I got back from Hawaii and wanted to import some pics. I had an unfortunate accident and had to buy a new camera. So now I had two cards both with some of the same image numbers. After I wanted to redo the import so I deleted the original pics and the folders in iPhoto and put them back onto the hard drive in separate folders. Now I get the message
    "The photo “IMG_0005.JPG” could not be opened, because the original item cannot be found."
    Now I have 1019 boxes that it wants me to cancel what do I do. Help

    OK so I got back from Hawaii and wanted to import some pics. I had an unfortunate accident and had to buy a new camera. So now I had two cards both with some of the same image numbers. After I wanted to redo the import so I deleted the original pics and the folders in iPhoto and put them back onto the hard drive in separate folders. Now I get the message
    "The photo “IMG_0005.JPG” could not be opened, because the original item cannot be found."
    Now I have 1019 boxes that it wants me to cancel what do I do. Help
    how did you do these delations? in the iPhoto window or using the finder
    do you have a referenced library ( (The iPhoto advanced preference to "copy imported items to the iPhoto library" has been unchecked) which is strongly NOT recommended. ) or a managed library (that option is in its default checked state)
    LN

  • The photo "IMG_5310.JPG" could not be opened, because the original item cannot be found.

    Each time I open iPhoto or plug in a device and iPhoto automatically opens, the following message appears five times, looking for photos I assume I deleted, perhaps the wrong way. 
    The photo “IMG_5310.JPG” could not be opened, because the original item cannot be found.
    I've searched the computer for the images, but they seem to be permanently deleted.  How do I "reset" iPhoto from looking for these photos and remove this "Alert"?
    Sincerely,
    Mark T

    mark, you are asking about iPhoto on your Mac, right? This is the iPhoto on IOS devices forum - iPads, iPhones, etc. Next time please post your question in the iLIfe iPhoto forum; you will get more help there.
    But to your question. This error message usually occurs, when original image files are missing from your iPhoto library. iPhoto keeps the original images and the edited versions, and when the originals are removed from the iPhoto Library by deleting them from the Finder, then the photos can no longer be edited, exported, printed.
    Does iPhoot open correctly, after the alert appears? Can you work with it, after the alert finishes? Then delete the corresponding edited versions of the missing originals from your iPhoto library. The versions probably will be marked by an exclamation point, when you browse your photos.
    To prevent this from happening again, open the iPhoto "Preferences" > "Advaced" panel and make sure the option "Importing: Copy items to the iPhoto LIbrary" is enabled. Otherwise original files may be stored outside your iPhoto library and you can accidentally delete them and loose valuable photos.
    Regards
    Léonie

Maybe you are looking for

  • New MacBook Pro 2011

    I just got my new MB and just want everyone not to fear buying one. I love it! No crazy fans, no overheating. It was worth the wait since I bought one in around oct-nov but returned it bc of a bad optical drive and misaligned keys that stuck. This th

  • Same position number in BBP_PD

    Hi All, We are in SRM 7.0, during SC creation process, if an existing line item is copy pasted and clicked on Order. It gives error message ' Position number available 2 times' In BBP_PD the same position number is there. How to overcome this error m

  • HT5312 How do I set up a rescue email? Need help

    How do i set up a rescue email

  • SGD-AD "LDAP error code 49"

    Dear all, I saw the following error in the server-login log file: 2007/07/24 15:15:03.098 (pid 2698) server/login/moreinfo #1185261303098 Loaded class com.sco.tta.server.login.LdapLoginAuthority: { LDAPRoot=.../_ldapmulti/forest/ accountEnabledChecke

  • Hibernate vs Oracle Net Services

    Dear All, I need to know, what is the best way to connect to oracle, Hibernate or normal oracle net services? And what is the advantages and disadvantages of each one? if you can give me a comparison from this points of view Development, Performance,