The shooting speed with the continuous shooting can be affected if I shoot jpeg, raw or raw + jpeg.
Hallo, I am using a Canon EOS 6D. In the specifications it is stated that the speed when doing the continuous shooting is 4.5 fps. I wonder if this speed changes depending on the setting regarding on how I save data on the card (raw, jpeg, raw+jpeg). Or it is ALWAYS 4.5 no matter how I save the data ?
Thanks
My interpretation of the spec is that it specifies how many FPS it can shoot when in good light with a good lens & it doesn't care about the file structure saved. That file goes into the buffer as the camera continues shooting & that becomes the limiting factor on HOW MANY shots you can take before the camera stops firing. A faster card helps a bit but transfer speed is really the limiting factor once the buffer starts to fill. From experience cameras writing to dual cards are slower than if instructed to only write to the CF card.
"A skill is developed through constant practice with a passion to improve, not bought."
Similar Messages
-
I've been using LR with my Nikon D3200 for a year or so. Shooting in RAW/NEF no issues with import etc until I updated LR and now I can't get LR to allow me to select when I try to import. It does show the images but they're grayed out and not able to be selected. Any thoughts? TIA
Greyed imaged in the Import dialog box mean you have already imported the photos into Lightroom, so there is no need and no benefit to importing them a second time.
Just go to the Library module, search for the desired photos, and resume working on these photos. -
Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
HeatherIn researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR -
I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard. Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?
Hi there,
I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine. -
Please can anyone help with the continuing password rejection problem with email on my imac.My Ipad and other systems work fine but despite reloading my password on imac it bounces back.Apple store has been visited and I have tried everything they suggest.
I use free Yahoo mail webMail access because folders I created in webmail access doesn't get set up in Apple Mail. While I was searching for post about password and keychain issues, I stumbled on several threads that complain about Mail folder issues, so I'm holding off on Apple Mail.
On the password and keychain issue that your post is all about. I've been using login keychain to save and automatical fill my login screens for a year or so successfully, with Safari and Chrome. Automatic form fill also works for Facebook login. Unfortunately, about 4 to 6 months ago, automatic password form fill stopped working with Yahoo webmail, while still worked for GMail (Safari and Chrome). I tried deleting the password entry for my two Yahoo email accounts to start fresh, but neither Safari not Chrome will even ask me if I want to save the password. I was so frustrated that I eventually installed the keypassX 0.43 (password manager) that is quite primitive sompare to OS X's keychain (when it works). Probably no surprise to you yet.
The surprise, to me at least, is that, for whatever reason, password auto form-fill from keychain started working again for Yahoo webmail login on Safari about 5-7 days ago. Still doesn't work on Chrome!
Two tips I can share, at least with webmail access:
1. Password is save only for one of my yahoo mail accounts. When I login in with my other yahoo account, I get no prompt to save the password, and form fill doesn't work when I try to log in a second time with my other Yahoo mail account.
2. On inspection of my login keychain, I see a webform password item saved for my Yahoo account that works with keychain. The name of the password is: login.yahoo.com(MyAccountName1#). When I open the password item and look in the Access Control tab, I see Safari and Chome are listed as allowed to access this password item..
I also an "Internet password" item with a name of just login.yahoo.com. When I open the the password item, it looks just like the password item created for MyAccountName#1, but the MyAccountName#2 is listed in the Account field. Inside the Access Control tab, no apps are listed in access permission. I added Safari and Chrome to the lists of allowed app, saved the password item.
Now when I bring up the Yahoo login page(by bookmark) on Safari, form fill fills in MyAccountname#1 for name and the proper password and I can login in. When I change the name to MyAccountName#2, the correct password is retrieved and I can log in! Alas, it still doesn't work on Chrome.
BTW, I changed the password item type from "Internet password" to "Web Form password" and saw no difference! I also edited the name to be "login.yahoo.com (MyAccountName#2)" to look like the web form password item that works, but it has no effect either.
From my experimentation, here's my observation:
1. A Web Form password item is created for the first account name(MyAccountName#1) for login.yahoo.com and typed as Web Form password. When I log in using MyAccountName#2, an Internet Password is created, but no applications are listed as allowed to access the password item, even when the password item was created after just logged in and logged out to yahoo with the account name and password for MyAccountName#2.
2. Manually adding Safari as an app that is allowed to use the password item works. Doesn't work with Chrome!
The version of Safari I'm using is Version 5.1.7 (6534.57.2). My installed version of Chrome is Version 21.0.1180.79 beta. -
When I shoot in "raw" mode my files are in the 12 to 15 MB range. If I convert the file to "Tiff" the file converts to about 35MB. When I convert to a "tiff", does this mean I can make larger prints?
When I shoot in "raw" mode my files are in the 12 to 15 MB range. If I convert the file to "Tiff" the file converts to about 35MB. When I convert to a "tiff", does this mean I can make larger prints?
No, that only means, that your raw format has a better compression. Converting to TIFF will not add any better resolution. Not the file size does count for better prints, but the pixel size - the width and height of the photo in pixels. -
I'm a first timer on this (or any) help site. I just installed Time Capsule. The first backup looks like it will take two days at the present speed. Can I close MacBook Pro and have first back up continue, and can I unplug tomorrow and plug in at work without affecting the backup?
Hi Oneinspirit,
Time Machine backups can be paused by choosing "Stop Backing Up" from the Time Machine icon on the right hand side of your menu bar ( ). Once you're ready to resume the backup, you can choose "Back Up Now" from the same icon.
Start a backup: Click the Time Machine icon in the menu bar, then choose Back Up Now.
Pause a backup: Click the Time Machine icon in the menu bar, then choose Stop Backing Up.
OS X Yosemite: Start, pause, and resume a Time Machine backup
http://support.apple.com/kb/PH18851
All my best,
Allen -
I have an iPod Touch 4g with 4.1 software, but it takes forever to update the software, how can I speed up the process?
Nothing you can do. Presently the Apple servers are overloaded because of iOS 6.
-
The Ipad came up with a notification, and can't get out of it. It's saying: Ipad not backed up. This Ipad hasn't been backed up.Backups happen when this Ipad is plugged in,locked, and connected to Wi-fi. When I press OK it can't continue. Please REPLY
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
-
Can I create vhba of 8GB speed with the card M81KR?
Hi,
Please I need your help to know if I can create vhbas of 8GB speed with mezzanine card M81KR.
Thanks,Hi Padranas,
Thank you for your response.
I am confusing about it......
To understand what you said. For example:
My UCS environment is: Chassis 5108 + 3 Blades B200M2 + M81KR Mezzanine card + 2104xp FEX + 6124xp FI .
We have 2 SAN switch brocade of 4GB speed by FC port connecting to the UCS FI and the Blade server has the service profile configure to use vhba of 4GB speed, I cannot change this configurations. We want to replace the Brocade SAN swtich by 2 new MDS 9148 of 8GB speed by FC port.
Can I be able to reconfigure the vhbas on my environment UCS to work with FC8GB replacing the Brocade switch to MDS?.
Our goal is improve the SAN speed from FC 4GB to FC 8GB.
We have a EMC stroage that support FC 8GB, but it is running to 4GB, because of Brocade SAN switch.
Thanks for your time. -
I have been using Adobe Premiere Elemnts on my Mac for years have done several project with no problems.
I have had this trouble in the pass but its back. Usually It fixes itself However I didnt have maverick. The message
a serious error has occurred the system will shut down and try to save your project. I have done updates and uninstalled
and restalled but I cant seem to resolve the problem. Can anyone suggest anything to try?According to Roaring Apps (view in Safari) -> http://roaringapps.com/app/adobe-premiere-elements-9 - there is no data as to whether Premiere Elements 9 will work with Mavericks. Says it works with Mountain Lion but it seems that no one has posted data on use with Mavericks.
You might be better off upgrading Premiere Elements. I've no idea what the 'current' version id as I use Premiere CC.
Good luck,
Clinton -
HI,
When I upload photos from my Canon Rebel 1000D to iphoto the images are labelled JPEG, yet I shoot in RAW.How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. I seem to have tried and read so much but just can't figure it out. How do I get iphoto 11 vers9.1.3 to not convert the photos to jpeg. Or do a have to use a different system? I have Adobe Bridge. Or can I upload directly into photoshop?
Also how do you install dmg's properly I am having problems installing them?
I have a Mac OS X 13 inch Version 10.6.7
Advice desperately needed
Thanks
NlouisDo you have Aperture installed? I found your model on a compatibility list; however, there was a note that it requires Aperture 2 to be installed:
http://www.apple.com/aperture/specs/raw.html
According to this excerpt:
To see a list of digital cameras with RAW-format support that are compatible with iPhoto, visit this Aperture webpage (any camera compatible with Aperture, Apple’s advanced photo editing and management program, is compatible with iPhoto as well)
which is at the bottom of this page:
http://docs.info.apple.com/article.html?path=iPhoto/9.0/en/pht41627265.html
I may be wrong, but I interpret that info to mean you need Aperture 2 before iPhoto will work with RAW? -
Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.
-
I will PAYPAL 100 bucks to the person who can help me with 5510 issue
Below is a on going chat i am having with a PIX expert... Can anyone see where the problem is when you read the message below???
Cisco ASA 5510 configuration for host inside private network
Question: We have a Citrix host behind a new 5510 that needs to be accessed by the public. I have tried to follow the examples on cisco.com but still continue to get errors. I KNOW I am missing something simple. I have taken out all my 'tries' and have basic config below with errors.
I am new to PIX/ASA and would live some suggestions on the proper Access Group and corresponding ACL to get the 192.168.71.100/72.54.197.26 Citrix server to accept ssl from outside.
ASA Version 7.0(8)
interface Ethernet0/0
description Outside interface to Cbeyond
nameif OUTSIDE
security-level 0
ip address 72.54.197.28 255.255.255.248
interface Ethernet0/1
description Inside interface to internal network
nameif INSIDE
security-level 100
ip address 192.168.72.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.71.2 255.255.255.0
management-only
object-group service Citrix1494 tcp
port-object eq citrix-ica
port-object eq www
port-object eq https
port-object range 445 447
nat-control
global (OUTSIDE) 1 interface
nat (INSIDE) 1 0.0.0.0 0.0.0.0
static (OUTSIDE,INSIDE) 192.168.72.100 72.54.197.26 netmask 255.255.255.255
static (INSIDE,OUTSIDE) 72.54.197.26 192.168.72.100 netmask 255.255.255.255
route OUTSIDE 0.0.0.0 0.0.0.0 72.54.197.25 100
http server enable
http 192.168.71.0 255.255.255.0 management
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
Error Log:
3|Apr 15 2011 21:06:07|305005: No translation group found for tcp src INSIDE:192.168.72.75/57508 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 21:06:01|305005: No translation group found for tcp src INSIDE:192.168.72.75/57508 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 21:05:58|305005: No translation group found for tcp src INSIDE:192.168.72.75/57508 dst OUTSIDE:72.54.197.26/443
5|Apr 15 2011 21:05:42|111008: User 'root' executed the 'no access-list OUTSIDE_access_in extended permit tcp host 72.54.197.26 host 72.54.197.26' command.
4|Apr 15 2011 21:05:20|106023: Deny tcp src OUTSIDE:114.38.58.208/2817 dst INSIDE:72.54.197.26/445 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:05:17|106023: Deny tcp src OUTSIDE:114.38.58.208/2817 dst INSIDE:72.54.197.26/445 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:04:37|106023: Deny tcp src OUTSIDE:221.1.220.185/12200 dst INSIDE:72.54.197.26/1080 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:03:50|106023: Deny tcp src OUTSIDE:32.141.52.12/1787 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:03:44|106023: Deny tcp src OUTSIDE:32.141.52.12/1787 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:03:41|106023: Deny tcp src OUTSIDE:32.141.52.12/1787 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:02:23|106023: Deny tcp src OUTSIDE:32.141.52.12/1785 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:02:17|106023: Deny tcp src OUTSIDE:32.141.52.12/1785 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
4|Apr 15 2011 21:02:14|106023: Deny tcp src OUTSIDE:32.141.52.12/1785 dst INSIDE:72.54.197.26/443 by access-group "OUTSIDE_access_in"
5|Apr 15 2011 21:01:56|111008: User 'root' executed the 'access-list OUTSIDE_access_in line 1 extended permit tcp host 72.54.197.26 host 72.54.197.26' command.
6|Apr 15 2011 21:00:13|302013: Built outbound TCP connection 7173 for OUTSIDE:150.70.85.65/443 (150.70.85.65/443) to INSIDE:192.168.72.100/2959 (72.54.197.26/2959)
6|Apr 15 2011 20:56:57|302016: Teardown UDP connection 7082 for OUTSIDE:72.54.197.26/137 to INSIDE:192.168.72.17/137 duration 0:02:01 bytes 62
6|Apr 15 2011 20:55:19|302013: Built outbound TCP connection 7088 for OUTSIDE:184.85.253.178/80 (184.85.253.178/80) to INSIDE:192.168.72.100/2879 (72.54.197.26/2879)
6|Apr 15 2011 20:55:19|302013: Built outbound TCP connection 7086 for OUTSIDE:74.125.159.147/80 (74.125.159.147/80) to INSIDE:192.168.72.100/2878 (72.54.197.26/2878)
6|Apr 15 2011 20:54:55|302015: Built outbound UDP connection 7082 for OUTSIDE:72.54.197.26/137 (192.168.72.100/137) to INSIDE:192.168.72.17/137 (72.54.197.28/24)
6|Apr 15 2011 20:54:17|302021: Teardown ICMP connection for faddr 10.160.68.225/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:15|302020: Built outbound ICMP connection for faddr 10.160.68.225/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:13|302021: Teardown ICMP connection for faddr 172.28.16.2/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7074 for OUTSIDE:199.7.52.190/80 (199.7.52.190/80) to INSIDE:192.168.72.100/2815 (72.54.197.26/2815)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7073 for OUTSIDE:199.7.55.72/80 (199.7.55.72/80) to INSIDE:192.168.72.100/2813 (72.54.197.26/2813)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7072 for OUTSIDE:199.7.55.72/80 (199.7.55.72/80) to INSIDE:192.168.72.100/2812 (72.54.197.26/2812)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7071 for OUTSIDE:199.7.52.190/80 (199.7.52.190/80) to INSIDE:192.168.72.100/2811 (72.54.197.26/2811)
6|Apr 15 2011 20:54:12|302013: Built outbound TCP connection 7070 for OUTSIDE:184.85.253.19/80 (184.85.253.19/80) to INSIDE:192.168.72.100/2810 (72.54.197.26/2810)
3|Apr 15 2011 20:54:12|106014: Deny inbound icmp src OUTSIDE:172.28.16.2 dst INSIDE:72.54.197.26 (type 0, code 0)
6|Apr 15 2011 20:54:11|302020: Built outbound ICMP connection for faddr 172.28.16.2/0 gaddr 72.54.197.26/1 laddr 192.168.72.100/1
6|Apr 15 2011 20:54:10|302013: Built outbound TCP connection 7063 for OUTSIDE:64.4.18.90/80 (64.4.18.90/80) to INSIDE:192.168.72.100/2809 (72.54.197.26/2809)
3|Apr 15 2011 20:52:17|305005: No translation group found for tcp src INSIDE:192.168.72.75/56624 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:52:11|305005: No translation group found for tcp src INSIDE:192.168.72.75/56624 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:52:08|305005: No translation group found for tcp src INSIDE:192.168.72.75/56624 dst OUTSIDE:72.54.197.26/443
2|Apr 15 2011 20:50:02|106001: Inbound TCP connection denied from 187.28.118.35/1973 to 72.54.197.26/445 flags SYN on interface OUTSIDE
2|Apr 15 2011 20:49:59|106001: Inbound TCP connection denied from 187.28.118.35/1973 to 72.54.197.26/445 flags SYN on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60784 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60783 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60781 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60782 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60779 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:58|106001: Inbound TCP connection denied from 184.27.73.83/443 to 72.54.197.26/60785 flags RST on interface OUTSIDE
2|Apr 15 2011 20:49:35|106001: Inbound TCP connection denied from 217.10.43.52/1486 to 72.54.197.26/445 flags SYN on interface OUTSIDE
2|Apr 15 2011 20:49:32|106001: Inbound TCP connection denied from 217.10.43.52/1486 to 72.54.197.26/445 flags SYN on interface OUTSIDE
3|Apr 15 2011 20:48:17|305005: No translation group found for tcp src INSIDE:192.168.72.97/55593 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:48:11|305005: No translation group found for tcp src INSIDE:192.168.72.97/55593 dst OUTSIDE:72.54.197.26/443
3|Apr 15 2011 20:48:08|305005: No translation group found for tcp src INSIDE:192.168.72.97/55593 dst OUTSIDE:72.54.197.26/443
THANKS!!
Reply.................................
ok do this:
no static (OUTSIDE,INSIDE) 192.168.72.100 72.54.197.26 netmask 255.255.255.255
clear xlate
access-list Outside-ACL extended permit tcp any host 72.54.197.26 object-group Citrix1494
access-group Outside-ACL in interface OUTSIDE
That should do it for you..
/M_4911140.html
Reply........................
kenboonejr:
Your reverse static needs to be taken out. then you need to do a "clear xlate" command. do that and post your config again and let me see it. I'll be standing by.
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
ASA Version 7.0(8)
hostname 5510
domain-name xxxxx
enable password xxxxx encrypted
passwd xxxxx encrypted
names
dns-guard
interface Ethernet0/0
description Outside interface to Cbeyond
nameif OUTSIDE
security-level 0
ip address 72.54.197.28 255.255.255.248
interface Ethernet0/1
description Inside interface to internal network
nameif INSIDE
security-level 100
ip address 192.168.72.2 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.71.2 255.255.255.0
management-only
banner exec xxxxx
banner login VPN firewall/router
ftp mode passive
clock timezone CST -6
clock summer-time CDT recurring 1 Sun Apr 2:00 last Sun Oct 2:00
dns domain-lookup INSIDE
dns name-server 66.180.96.12
dns name-server 64.180.96.12
object-group service Citrix1494 tcp
port-object eq citrix-ica
port-object eq www
port-object eq https
port-object range 445 447
access-list Outside-ACL extended permit tcp any host 72.54.197.26 object-group C
itrix1494
pager lines 24
logging enable
logging asdm informational
logging mail critical
logging from-address xxxxx
mtu OUTSIDE 1500
mtu INSIDE 1500
mtu management 1500
asdm image disk0:/asdm-508.bin
no asdm history enable
arp timeout 14400
nat-control
global (OUTSIDE) 1 interface
nat (INSIDE) 1 0.0.0.0 0.0.0.0
static (INSIDE,OUTSIDE) 72.54.197.26 192.168.72.100 netmask 255.255.255.255
access-group Outside-ACL in interface OUTSIDE
route OUTSIDE 0.0.0.0 0.0.0.0 72.54.197.25 100
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
username root password xxxxxx encrypted privilege 15
http server enable
http 192.168.71.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet 192.168.72.0 255.255.255.0 management
telnet 192.168.73.0 255.255.255.0 management
telnet 192.168.71.0 255.255.255.0 management
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd address 192.168.71.3-192.168.71.254 management
dhcpd dns 66.180.96.12 64.180.96.12
dhcpd lease 3600
dhcpd ping_timeout 50
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns maximum-length 512
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
smtp-server 66.180.96.57
Cryptochecksum:472013675a200d36e6155c03238fa05c
: end
[OK]
5510#
Was this comment helpful?
Yes No
kenboonejr:
Ok so at this point if you issues a clear xlate command that would have flushed the translation table and citrix should be able to get out with the current configuration. If it can't post the logs for it.. This is the right config for what you want to do.
Was this comment helpful?
Yes No
charlietaylor:
Did that, no connections. Here is what the log says with the config above right after I cle xlate and try to connect from outside.....
6|Apr 21 2011 12:40:44|302014: Teardown TCP connection 8954 for OUTSIDE:74.125.159.105/80 to INSIDE:192.168.72.100/57140 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:40:43|302013: Built outbound TCP connection 9079 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57142 (72.54.197.26/57142)
6|Apr 21 2011 12:40:14|302013: Built outbound TCP connection 8954 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57140 (72.54.197.26/57140)
6|Apr 21 2011 12:40:13|302014: Teardown TCP connection 8618 for OUTSIDE:74.125.159.105/80 to INSIDE:192.168.72.100/57134 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:39:43|302013: Built outbound TCP connection 8618 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57134 (72.54.197.26/57134)
6|Apr 21 2011 12:39:35|302014: Teardown TCP connection 8369 for OUTSIDE:74.125.159.105/80 to INSIDE:192.168.72.100/57129 duration 0:00:30 bytes 0 SYN Timeout
AND....
Citrix server can not even get out to internet, here is the logs say when you try to open a browser.....
6|Apr 21 2011 12:39:05|302013: Built outbound TCP connection 8369 for OUTSIDE:74.125.159.105/80 (74.125.159.105/80) to INSIDE:192.168.72.100/57129 (72.54.197.26/57129)
6|Apr 21 2011 12:38:55|302014: Teardown TCP connection 8227 for OUTSIDE:74.125.159.99/80 to INSIDE:192.168.72.100/57121 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:38:25|302013: Built outbound TCP connection 8227 for OUTSIDE:74.125.159.99/80 (74.125.159.99/80) to INSIDE:192.168.72.100/57121 (72.54.197.26/57121)
6|Apr 21 2011 12:37:36|302014: Teardown TCP connection 7667 for OUTSIDE:216.52.233.134/443 to INSIDE:192.168.72.100/57108 duration 0:00:30 bytes 0 SYN Timeout
6|Apr 21 2011 12:37:32|302014: Teardown TCP connection 7568 for OUTSIDE:74.125.159.99/80 to INSIDE:192.168.72.100/57107 duration 0:00:30 bytes 0 SYN Timeout
Was this comment helpful?
Yes No
kenboonejr:
ok so firewall is showing the rules for the inbound stuff working, but the citrix server is not responding that is why you are getting a SYN timeout.
Does your citrix box have multiple IP addresses or multiple NICs?
What is the default gateway on the citrix box.
I can guarantee you that the config is good.
The logs show sessions getting created - not blocked so its not the firewall causing the problem. Something else is not quite right.
Rank: Sage
Was this comment helpful?
Yes No
kenboonejr:
From the ASA can you ping the real ip address of the citix server?
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
This network is in production. CurrentIy have a cheesy Lynksys router (the only thing it does is NAT for Citrix) and a "Transistion" throwdown firewall with two simple rules that allow all and allow outside to Citrix.
The Citrix has one nic with default gatewway same as all other devices on network (72.2) and goes out just fine until I cut over to 5510. Then is can not get out. (and yes, all other equipment is turned off and the switches are power cycled afer I power up 5510 to make sure I am not having switch arp issues)
The Citrix is in use 24/7 by remote users so I can't switch back and forth. (especialy during day when everybody goes out to Inet via this unit or the cheesy gear I am replacing)
I see the connections too but it connects for half a second and sends 0 bytes..... hmmmm
/M_4911140.htmlRank: Sage
Was this comment helpful?
Yes No
kenboonejr:
you are having arp issues with the citrix box i would think.
so once you cutover to the ASA .. can you ping the citrix box from the ASA?
The citrix arp table still shows the mac address of the linksys 72.2 interface is my guess and you would need to flush the arp table on the citrix server.
Also, how does the internet connect. Is it straight to the linksys router? Is this cable, DSL or T1 to a provider router or what. There is a router on the outside of the ASA of some sort. It could be that that devices still has the mac address of public side MAC address of the citrix box in its ARP table. Most likely that needs a reboot as well to flush its ARP table. I would bet on it.
I have been working on Cisco firewall since before Cisco bought the PIX. I can assure the config is good without that reverse static.
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
OK... but if it is an ARP issue would the 5510 still get the info that it is in the logs?
I mean, if packets were headed to another port why am I seeing SCR/DES info in the logs?
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
AND... I REALLY apperciate all your help!
/M_4911140.htmlRank: Sage
Was this comment helpful?
Yes No
kenboonejr:
you got a point there. Here is what I know. When you try to access it from the outside... the citrix doesn't respond. So could it be at that point the citrix box has the old arp entry for the linksys? so the packets aren't getting back.
So if you cut over. start everything fresh. turn off linksys. reboot ISP router/device. flush arp table on citrix. Then ping the citrix box from the ASA. If that works then try the connection from the outside. How are you connecting to the outside? Are you at a different location or are you on a mobile broadband card or what?
Was this comment helpful?
Yes No
charlietaylor:
I am physically sitting on the network. I am trying access from outside on my broadband card that is known to connect.
Their office is closed tomorrow and I am getting access to come in and powercycle every single device. I will then first try to ping Citrix from ASA and move downstream like you suggest.
Thanks again, I really do hope it is a ARP issue in a device I did not reload. (the ACTELIS ISP box and actual Citrix server)
I will let you know.
Was this comment helpful?
Yes No
charlietaylor:
reboot of every device in the network did not change anything
/M_6253131.html
Was this comment helpful?
Yes No
charlietaylor:
the ASA can ping the citrix server
/M_777876.html
Was this comment helpful?
Yes No
slamjam2000:
From your config, I don't see a route to the inside...
The only route on the ASA is to the outside:
route OUTSIDE 0.0.0.0 0.0.0.0 72.54.197.25 100
Was this comment helpful?
Yes No
charlietaylor:
so what are you suggesting?solved
-
I recently tried to burn some photos on a CD. For some reason, It did not work. Now I have a .fpbf folder on my desktop. I can't seem to get rid of it. I tried dragging it to the trash, but then I get a box asking my to type my password it, so Finder can make the changes. Doing so, does nothing at all. And when I try to burn another CD from the same .fpbf file, I get a the following message: "There are 35 items that can’t be burned because the original items can’t be found. Skip the items and continue burning?". When I skip and continue burning, nothing shows up on the CD. In the meantime, the .fpbf folder is still in my desktop. I tried changing the aliases on each pic, but it still doesn't work. Any ideas of how I can remove this folder from my desktop?
Thank you.Beavis2084,
Thank you for your detailed explanation but something is seriously wrong with my computer. Although the method you have described is very similar to the one I tried in step 2 from my second post, I have since "done things" which may have complicated matters—or suggests that my computer has a more serious problem.
Here's what I did:
1). Installed Onyx and discovered that I had a .plist file (com.apple.iphotomosaic.plist) that was causing a Syntax error: "Conversion of data failed. The file is not UTF-8, or in the encoding specified in XML header, if XML." After doing some research online, I was given the understanding that downloading the iLife update 9.0.3 (I installed the more recent version, 9.0.4) would solve this problem because it would also fix some system issues. So, I downloaded it...and when it didn't solve the problem, I decided to just deleted that .plist file.
2). I read your knew post and decided to follow your directions, even though I realized they were basically the same steps I followed in the 2nd method I mentioned earlier. I say "basically" because, for some reason, after inserting a blank disc, my computer does not open the disc in the Finder. Instead, it places the blank disc's image on the Desktop, even though the Finder's Preferences and the System's Preferences are set to have it open in the Finder—nothing should be on my Desktop! (Note: When transferring the items (all folders) I want to burn to the blank disc, I did not use the Option-Click-Drag method as before, I used the Click-Drag method, which created the curved arrow in the lower left corner of each item.)
Now, for the result of "method 2," the method we basically have in common, the computer goes through the burn stage but, in the verify stage, tells me that it is unable to verify the disk, suggests that my DVD may be unreliable and that I should try another disc, and then tells me about some "fork" (?) error (-43).
I don't know what to do anymore...
Maybe you are looking for
-
Hard drive crashed need to restore iphotos from Time Machine
I need some serious help. I have a 24inch intel imac and my hard drive failed. I thought I had everything backed up on my external hard drive via Time Machine (my last backup was April 11th) so I replaced the hard drive. Once I reinstalled Leopard 10
-
CS6 PhotoShop hanging when opening PDFs - help?
Hi all, I'm IT support to a team of studio artists who are having some issues with our newly upgrade CS6 Premium suite (Mac OS 10.6 + Mac OS 10.8). Situation: (Mac OS 10.6 problem) someone will be working on a 2GB network file, and tries to open a PD
-
SQLdeveloper on mac and code insight
Hi! Just downloaded SQL developer 2.1.0.63 and running it on snow leopard. (BTW, for others out there, make sure that you unzip the file with the standard apple utility). I cannot get code insight to work for an Oracle or a Teradata DB. For Oracle, i
-
Clear waveform chart history if dynamic 1D data is used
I am new to Labview and am using a Waveform Chart. To clear this I need to supply an empty array. I have done this with scalar inputs, but in this present case, the input to the chart is a bundle of 1-D array of dynamic data. I cannot figure out ho
-
Export Scatter Chart to HTML?
I have quite a few scatter charts that I'd like to export to HTML where they would keep the property of being able to view the data points when you hover the mouse over them. Here's an example of the chart I have expanded data that corresponds to eac