The Signal analysis functions of the DIAdem-CAL can not use.
I use a DT3003 board for Data Acquisition in my system. My data is signal of Electromyography,and it needs the DIAdem-CALC "Signal Analysis" such as FFT.But these functions in my DIAdem are disable, Why?
Attachments:
10min.rar 194 KB
Yes!
We do need Frequency Analysis.The EMG is some kind of time-voltage signal.DIAdem do us great help in data sampling.We need to get information such as Average Amplitude, spectral parameters like Mean Power Frequency,Median Frequency from the raw EMG. Is "Signal Analysis" function of the DIAdem standar version able to full fill our demands?
Re:Thanks for your advice again.Your helps are important for us.
Cediland
Similar Messages
-
I have an iphone bought in the UK but I'm in Europe and can not use it I need help please help me thanks
wiliiam rrichard wrote:
Because My iphone is Locked on the United Kingdom
No it is not. iPhones, like all cell phones are not locked to countries. They are locked to carriers.
Only the carrier to whom the device is locked can unlock it. Contact the carrier. -
Go to msn.com for example: at the top of their page they have clickable link to hotmail. When I upgraded to Firefox 7 this link no longer works. Same thing happens with my yahoo mail, gmail and hotmail. If you open up yahoo mail for example; I can not click on the signout tab.... it doesn't function with firefox 7. I worked prior to uploading new version. I don't have that problem on my windows 7 platform.
That problem can be caused by the Yahoo! Toolbar that extents too much downwards and covers the top part of the browser window and thus makes links in that part of the screen not clickable.
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
Using LDAP in 9.3.1, I can got the user list but can not use their password
Hey guys, I need your help.
I am using msad for Shared Services External Authentication.
I configurate the msad successfully.
And I could find the user in local domain. But I can not use their password in workspace.
That mean's I could find the user in local domain and do the provision job.
But I can not use their password in localdomain to login on workspace.
Is there any thing I missed when configurate the Shared Services?
Need your help.you may have trouble -
if password use NATIONAL character, such letters like (я ч ъ ю )
if user, who's have access from SS to AD under "NATIONAL" folder
p.s. my settings for AD
Name: NTLM Domain NAME
Hostname: x.x.x.x
Port: 389
Base DN: DC=NAME,DC=domain suffix
User DN: CN=user_name, CN=Users Catalog
Login: sAMAccountName
Email: mail -
Populating the Signal Express Category on the Functions Palette
Hi
Can anybody help with advice on how to populate the signal express category on the block diagram Functions palette ?
Thanks
Solved!
Go to Solution.
Attachments:
LV Functions Palette.PNG 14 KBHi Ewan,
Uninstalling and reinstalling in the right order would ensure that everything was properly associated. However, I don't think that should be necessary yet in your situation. Please go to Control Panel > Programs and Features > National Instruments Software to see the full list of National Instruments software you have installed. From here you should be able to select any individual installation from the list and select "Repair". Instead of just seeing that something is already installed and exiting, this should go through the installation and check for corruption. As well, this should add the correct associations if they were currently missed due to the order of installation.
Please try running a repair of SignalExpress 2013 and restarting your computer, then check to see if the functions palette in LabVIEW is fully populated.
Thanks!
Emily C
Applications Engineer
National Instruments -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected] -
The niFPui.mxx plug-in caused an exception in the CmxAggregateItemUI::InvokeCommand function in the NIMax process. When saving *.iak file in MAX4.6
Hi There,
The subject header just about says it all. This is the first action I took with MAX - it is a fresh install. The file I wanted to save was still written and the FP seems to be working ok. However, I need to know what happened.
I can't post the whole log file due to the amount of characters allowed on this post. I can cut and paste sections if there is a specific part of the file you need. Below is the first section and last section.
Context where exception was caught:
Func:
CmxAggregateItemUI::InvokeCommand Args: plugin=niFPui.mxx Item=0107EAB1
cmdID.cmdId={4A36174B-EC0C-4D73-A23D-F15D164542DE} cmdID.index=0
Application : C:\Program Files\National Instruments\MAX\NIMax.exe
User Name : slaney
OS Version : 5.1.2600 (Service Pack 3)
Exception Code: C000001E
Exception Addr: 457BC448
Return Address: 457BC448
Function Name : nNIFPServer::tFpLinearScaleRange::`vftable'
Module Name : FieldPoint71
Parameters : F001008E 7800FDDD C5100DFC EC0107EA
Source File : (not available)
Return Address: 481000C3
Function Name : (not available)
Module Name : (not available)
Parameters : 00000000 00000000 00000000 00000000
Source File : (not available)Hi,
I did a research on your error message and it seems this problem was introduced with MAX 4.6. This version switched to a new error reporting mechanism and reports even errors that are which are not critical to your task.
These errors typically show up as "unexpected" and if your error falls into this category have a look to this KB for further assistance.
If it doesn't fall into this category, your could try to go back to the MAX 4.5 or 4.4.. Of course you would need to reinstall some components and might not be able to use newer drivers at all.
Let me know.
DirkW -
What happened to the " street view " function in the maps app in iOS6?
What happened to the "street view" function in the maps app of iOS6?
Gary ~ It's now available via a browser:
Street View for Google Maps web app goes live -
I do not have a problem getting in the iTunes stores. My issue is once on the site I can not use the "search". It says there is a pure virtual function call R6025. How can I solve this problem? Do I have to create a new account? Do I have to uninstall and re-install? Thanks
Thanks so much for your feedback. I really appreciate any input here.
If someone from Adobe could GUARANTEE that this problem would go away if I
purchased CS4, I would pony up the cash and do it. However, I'm skeptical
about that because I just saw someone else post a message on the forum today
who is running CS4 and getting the exact same runtime error as me.
I'll try un-installing and re-installing as Admin, and if that doesn't work,
maybe I can find a used copy of CS3.
In the meantime, I'm also wondering if a Photoshop file can carry any sort
of corrupt metadata inside it once it has errored out? Reason I ask is, I
had to port all of my old PSD files to the new computer, and I only seem to
be getting this error when I attempt to work on one of the files that
previously got the runtime error when they were sitting on my XP machine.
When I create new files from scratch on this new computer, they seem to be
working just fine (at least, for now).
If so, I would probably be smart to never open those troublesome
"errored-out" files again. -
I need to populate the Document Currency in the COPA analysis. At the movem
I need to populate the Document Currency in the COPA analysis. At the movement Overhead reporting is Profitability Analysis Cube in BW. Now they want to Include the document currency in the reporting and they want add the field document currency and currency key. Can any one tell how to create the Document currency in COPA Analysis please. Thank you
Hi,
CO-PA will only store values in either operating concern currency or company code currency (if active). The fields FRWAE and KURSF are just for the line item display in transaction KE24 when pressing 'entry/op currency'. COPA does not store values in the document ccy.
The 'foreign currency' in the PA line item always contains the currency that was used for the conversion, but does not contain the document currency of the original document. So only in case the document currency was used for the translation of the PA values the foreign currency will be equal document currency.
In case of SD documents, CO-PA always uses the document currency as base of the conversion in order to transfer values of statistic condition types consistently.
In case of FI/MM documents system uses the company code ccy as the base for conversion into operating concern ccy (foreign ccy).
regards
Waman -
I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?
Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS. -
I don't have the extract assets function despite the update
I have just updated photoshop cc (14.2.1) but the I don't have the "extract assets" function in the menu "file".
It doesn't exists.2014.0.0 Just found out someone else here has a newer update than me, he has 2014.2.1, mine says it is up to date. He has the feature with his. Waiting on IT now
-
The function "containsIgnoreCase" for prefix "fn" can not be found in the specified tag library.
Hi All,
I am getting this error on my jsff
The function "containsIgnoreCase" for prefix "fn" can not be found in the specified tag library.
jsff includes -
<jsp:root xmlns:f="http://java.sun.com/jsf/core"
xmlns:fn="http://java.sun.com/jsp/jstl/functions"
xmlns:c="http://java.sun.com/jsp/jstl/core">
Error at this line - <af:inputListOfValues
disabled="#{fn:containsIgnoreCase(bindings.Items.attributeValue,'XYZ')}" >
Is it Library file issue ? I have already added JSTL1.2.Hi Frank,
I have imported the same directly by code.
I am facing this issue on one of my system, but the same code is working fine in my other systems. I have tried re-insatlling jdev and importing all the files.
But still facing the same issue.. This might be some jdev issue in specific system ?
Please let me know if anything i need to add . -
HT1947 What happened to the keyboard search function on the remote app?
What happened to the keyboard search function on the remote app? Was the only thing that really made it useful.
I am having the same issue. I can see a dimmed keyboard icon on the top right of screen, but cannot access the keyboard to enter information for Apple TV 2. Is anyone else having the same issue and are there any solutions to fix the problem?
-
Not able to find the HR Integrator Function in the Function
Dear All,
I am not able to find out the HR Integrator function in the Functions. Kindly do i need to do any setups or any other things to get this in place.
We are using Version R 12.0.6
Thanks and Regards,
Joshna.Hi Duncan,
Sorry for the late response.
Please find the issue below.
- we wanted to create an HR Integrator for the Requisition and vacancy. For this we find the steps in the metalink. Please find the steps below.
When we are doing 5 th step we are not able to find the "HR Integrator" in the list of values. So we went and check the Menu there we find that HR Integrator function is not attached to the Menu. We tried to call that function but we are not finding that Function.
1.Check your IE and Excel/Word Settings.
2.Select the ‘Desktop Integration’ Responsibility
3.Click ‘Create Document’ function
4.Uncheck the Reporting Checkbox as this integrator is for uploading. Select the Viewer as Excel
5.Select the ‘HR Integrator Setup’ as the Integrator.Click "Next"
6.Select Content as "None" as we need to create the blank document for upload and Click "Next"
7.Click on "Create Document "
8.Once the spreadsheet is created, enter the following details and upload it back into the system.
Metadata Type : DOWNLOAD – to create download integrators
UPDATE – to create download / upload integrators
Application Short Name : PER
Integrator User Name : <User Defined Name for Integrator>
View Name : <User Defined View>
Form Name : Name of the Form to which the integrator is to be associated
API Package Name : API Package Name used to Upload Data (Only for UPDATE Integrators)
API Procedure Name : API Package Procedure (Only for UPDATE Integrators)
API Type : PROCEDURE / FUNCTION
Click on Oracle -> Upload to create the integrator
9.Define a Function using System Administrator -> Application -> Function. This function will be used to restrict the Responsibilities for which a particular integrator is available.
Function = Internal Function Name
User Function Name = User Defined Function Name
10.Create the Form Function Association Document using Web ADI Menu –Desktop Integration -> Create Document
Select Integrator as "HR Maintain Integrator Form Function Associations" and repeat step 4
11.Select the application in which the integrator is defined and the Integrator User Name for the Form Function Association has to be done. Click Next to continue.
12.Click on "Create Document" and Attach the Form Function created in step 9 i.e.Internal Function Name to the Integrator in the document created in the above step and upload the same.
13.Define the Layout for the Integrator created in above steps using
Desktop Integration -> Define Layout
14.Select the integrator for which the Layout has to be defined and click Go to continue.
15.Select the columns that will be displayed and click Apply
16. Navigate to the Form which you have attached in step 8 and Click on Export Icon.
You will be able to view the Integrator.
Maybe you are looking for
-
I am currently running OSX 10.6.8 on my MacBook Pro. Can I upgrade straight to Yosemite and if I can what issues will I face?
-
In the firefox sync options, there is no option available to sync extensions. I really appreciate if you can help me with this, i love to use extensions on firefox. Is there any add-ons or extensions for firefox 4 to make it able to sync its extensio
-
Eclipse black textbox background On snow leopard 10.6.8
I am currently using Eclipse Indigo on Snow leopard 10.6.8 and encounter with black textbox background in internal web viewer. I try to find to find any solutions on google but could'nt find one. Can anyone help me to solve this problem because I rea
-
Canvas resize stretches pixels of image content slightly when used :(
Hi, I've a document that measures 3000 x 3000 pixels and I want to put an extra 600 pixels in height on it. I tried using canvas resize tool and it puts the extra pixels in height where I want them but it actually stretches the content very slightly.
-
After lion iPhoto strikes. a ring running
I have a problem since i have lion on my notebook pro i cant use Iphoto ,i cant even open ,every time a loading sign.I intalled for third time but the same ,i am a new for mack and dont know what to do please help me thanks