The sims 3 non parte più !!

Ciao ragazzi, ho un I mac da 21, 5 pollici da circa un anno e mezzo e da poco ho acquistato un Iphone 4S
Il mio problema nasce con i The sims.
Inizialmente comprai i the sims (base + 2 espansioni) e li installai sul computer. Giravano perfettamente
Poi, verso la fine di agosto ho fatto un aggiornamento al computer. Dopo quell'aggiornamento si è bloccato il gioco, ma non solo, adesso non mi fa proprio più aprire i dischetti. L'icona rimbalza nel dock e poi l'unica soluzione che mi da è quella di fare l'uscita forzata.
Mi avevano detto di formattare il computer per poi installare di nuovo il sistema operativo Os X 10.6 (quindi dal dischetto che mi è uscito dalla confezione del computer) e provare così. Niente da fare.
Ho chiamato la EA , ho spedito i giochi e mi hanno detto di scaricarli da Origin (loro sito Online) da un window. Ho fatto cosi, ma niente, i file il mac non li legge.
Ad un certo punto ho lasciato stare tutto e ho scaricato Lion (bellissimo *-* )
Sinceramente però sono delusa, mi avevano proposto di mettere un sistema parallelo per far girare i giochi, ma non volevo spendere 200 euro per un programma che poi userei solo x i the sims.
Possibile che tutti riescano a giocare a The sims tranne io?? Andava tutto bene, perchè non mi apre più i dischetti del gioco?? (sia i vecchi, che i nuovi )

Ci scusiamo per questa traduzione approssimativa di Google. Si tratta di un utente al forum degli utenti. In tal modo qualsiasi aiuto si rischia di arrivare qui è da altri utenti. Si potrebbe trovare di meglio aiutare a http://www.apple.com/usergroups/ dove qualcuno può tradurre in inglese la domanda precisa per poter essere pubblicati qui. Prova anche il controllo sito web thesims direttamente le risposte alle tue domande: https://help.ea.com/en/the-sims/the-sims-3 Buona fortuna!

Similar Messages

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?

Greetings anabeqiri,
Thank you for contributing to the Apple Support Communities.
The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
All the best,
Jeremy

HT201401 I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me

I am using iphone 3s after updating my phone it is not reading the sim i tried with different sim's but none worked can you please help me

There is no iPhone 3s.
What is displaying on the device?
Has the device ever been hacked or jailbroken?

I want to factory unlock my iphone 4s vodafone.....i am in pakistan now and none of the sim cards are working so i need solution here is imei.. 013072001593353

I want to factory unlock my iphone 4s vodafone.....i am in pakistan now and none of the sim cards are working so i need solution
<Personal Information Edited by Host>

Only the carrier the phone is locked to can authorize the unlock. You will need to contact Vodafone to see if you qualify for an unlock.

I took out the SIM card before I sold a water damaged (non working) phone. Now the buyer wants the pass code to open it. Is there still personal stuff on this phone?

I took out the SIM card before I sold a water damaged (non working) phone. Now the buyer wants my pass code. Is there still personal stuff on this phone?

The sim card ONLY holds the information needed to connect to your cell company, so yes, there still could be sensitive information on your phone. It should have have had Find My iPhone turned off and the phone's data and settings wiped before you sold it. You really do need to give the new owner your pass code if he is to use the phone. After he's gotten in the phone, ask him to turn off Find My iPhone and then go to Settings > Reset > Erase All Data and Settings and then he should set up the phone on his own Apple ID.

Invalid SIM - none of the usual solutions work

We got AT&T to unlock an iphone 4 that we had used in the States and then taken abroad. Spoke with them several times to confirm the phone is unlocked.
Then downloaded latest OS, did a backup and restore over iTunes, reset it to factory settings. We have now tried 3 different SIM cards to activate the phone with, but always get the "SIM not valid" message ("only compatible SIM cards from a supported carrier may be used to activate phone..."etc). These SIM cards all work just fine in our other iphones 4 and 4s. So - its not a SIM card issue, and the phone is on the latest OS. Trouble is, AT&T say its no longer their problem, and we live in a country where there are no Apple stores (Lebanon).
Any ideas anyone? We really need to use this phone :(. Thanks.

Yeah, but if officially unlocked, updating will not lock it back again.
Anyway as said before, nothing can be done here in this forum. You have to call AT&T.

I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

How do I save my iPhone phonebook to the SIM and synch to a Windows XP PC

I have recently acquired an iPhone for business use, as it seemed to be a very capable handset - which it is, but surprisingly not to the extent one would expect.
All previous mobile phone handsets I've have owned let you choose to store your phonebook to SIM and/or the handset's memory. I haven't been able to find a similar setting in the iPhones menus - does anybody know how to do this? One can import SIM contacts, but not vice versa.
Alternatively, does anyone know of a desktop application for Windows XP that will backup or synch the contacts and calender from the iPhone. I've tried iTunes but all it seems to sync is music and photos - neither of which are applicable to a business user. Maybe I've missed something.
Again all other handsets have come with Windows compatible backup/sync software which enables one to backup your contacts as well as inputting data either through the PC or the handset. To-date I've not spotted any useful utility in the AppStore. Our business doesn't use an Outlook Exchange Server, and we don't want to move to one just to be able to backup. Similarly, our business doesn't store data on insecure public websites such as GMail, Google etc.
Don't get me wrong the iPhone is a nice bit of kit - just difficult to back-up

Thanks for responding.
Thanks for pointing me to the manual. I was surprised that there wasn't a manual in the box with the phone. It seems that the iPhone is left to the user to find things out by osmosis.
You confirmed what I suspected - that you can't save to SIM. Why not - I don't understand. When the handset breaks, gets a flat battery or get to old to use etc, I won't be able to just transfer the SIM to another handset, as I have done in the past. This is a serious deficiency on Apples part.
As for contacts - I don't particlular wish to use Outlook. We use Thunderbird and Scalix for our email. I had hoped to find a dedicated desktop program similar to those provided by Palm, Nokia etc with their phones
I see from the Manual that Windows has a contact list application and will see if I can configure this to provide what I need. In the mean time I will continue to duplicate data on my trusty Zire which has never let me down so far.
Cheers
Hugh

Do I have enough space and memory on my 6 year old Macintosh to play The Sims 3?

I've heard that The Sims 3 requires more GB and a stronger, more upgraded RAM. Knowing my computers system memory shown above, if I install The Sims 3, will it run smoothly? If not, what should I do to clean up my computer in order for the game to play smoothly without big problems?
Here is all the information on my macintosh computer:
Model Name:          iMac
Model Identifier:          iMac5,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.16 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          4 MB
Memory:          1 GB
Bus Speed:          667 MHz
Boot ROM Version:          IM51.0090.B03
SMC Version (system):          1.9f4
Serial Number (system):          QP64814UVUW
Hardware UUID:          00000000-0000-1000-8000-0017F2C4139D

Hi Phoebe!
Installing more RAM is the easy part, that can only speed up her Macbook. As for upgrading the OS from Leopard would depend on the exact specifications of the Macbook and whether it can actually handle Snow Leopard 10.6, and this is independant of the RAM question.
One thing to consider is: can the present Macbook do what she needs? If the answer is yes, then leave it as it is - except for more RAM. Is the hard drive big enough to contain whatever applications and files she needs?
Start by checking if it can run Snow Leopard:
Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
If yes, investigate whether the applications she currently has will run on Snow Leopard and, conversely, if any new applications she might need can run on Leopard or if they require OS 10.6 or above.
OS 10.6 Snow Leopard is once again available from the Apple Store:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Once it is running Snow Leopard You can also purchase the code to use to download Lion from the same number (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
http://www.apple.com/osx/specs/

HT204411 iTunes store - I live in the German speaking part of Switzerland (and have a credit card address here too) but want to watch films in English, Italian, or French. Why are films not available in these other languages ?

Hello, I live in the German speaking part of Switzerland (and have a credit card address here too) but want to watch films in English, Italian, or French. Why are films not available in these other languages ? Unless I am mistaken, iTunes Switzerland is far from Swiss and does not encourage its people to watch films in the local languages of its country (at least French and Italian would be good too...). Can anyone help ? Do I have to move to Geneva to watch a non French film in French or Lugano to watch a non Italian film in Italian or simply buy a DVD to get round it?

I have the same problem. I want to watch any movies in French (in the original, or subtitled and/or dubbed). But I cannot seem to find any on iTunes. Does iTunes offer any content in other countries (I live overseas) in the languages of those countries?

My Iphone 3 is broken where the SIM is inserted. How can I use it as an ipod?

Iphone 3 has sim slot that does not reconize the sim. still says no sim.

Then you're hosed. If the SIM slot is physically bad, then you can't activate it at all since it requires a SIM to do so. make an appointment at the genius bar. They can replace the phone for $149.
Personally, I think it would be smarter to just buy an iPod and sell the phone for parts.

Evaluation of the slope of part of a curve with cursors

Good morning,
I am trying to get the slope of part of a curve. The curve is a stress strain curve and the idea is simply to manually choose the X range to evaluate the slope and extract the Young modulus. The user would place the cursors and the slope parameters would be displayed in an area.
I got some clues from various examples here in presenting au automatized calculation of the min, max, average and other parameters of the part of the curve contained between the two cursors, using the StatblockCalc command in the adequate range.
However, I understand that the regression tool needs two new channels containing the values between cursors (flags and export manually).
Then, the doubt is: Is there some way to bypass the creation of new channels each time the cursor is moved to get the linear regression parameters "live"? I am rather new using scripts with diadem and can´t find the apropriate way to code this. Do you have any clue?
Thank you in advance,
David

Hi David,
See if this application does what you want. Note that it installs a new icon at the top of the VIEW icon bar, so that you can call the script easily from the VIEW panel after you've run it once in the SCRIPT panel. There is no way around extracting the new X and Y channels from the desired X range in order to calculate the slope of that X region, but you don't have to use flags, which are designed for interactive use only.
http://forums.ni.com/t5/DIAdem/Using-DIAdem-how-to-get-the-slope-of-a-signal-Linear-or-non/td-p/2158...
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Get the MCC and the MNC of the SIM card and of the network

Hello,
We publish a network speed and quality measurement application used on desktop, tablet and smartphone.
This application is called nPerf. It is available on desktop via a web browser at www.nperf.com, on iOS at ios.nperf.com and Android at android.nperf.com.
We are currently working on porting our solution for Windows Phone / Windows. The project is a universal project using Windows RT 8.1 (Visual Studio 2013 Express Update 4).
However, the project is currently "stuck" because we lack two essential information to identify the operator of the user: the MCC (Mobile Country Code) and MNC (Mobile Network Code), at least those contained in the SIM card.
Ideally, we would also need, in order of priority, the MCC and the MNC of the active connection (in the case of roaming), a DB signal strength of type RSSI or RSRP (more accurate than the number of reception bars displayed on the phone), the id of the cell
on which the connection is established (CellId) and the cell area code (LAC or TAC).
I have reviewed all the Windows RT 8.1 APIs available, particularly the namespace Windows.Networking.Connectivity and none seems to contain this information.
We would understand that it is not possible to access all this information but the SIM MCC and MNC are really needed and are available on other systems such as iOS or Android. It would really be a pity if we are not able to continue the development of this
application simply because these two information is not available ...
Would it be possible to tell us how to retrieve this information or, failing that, to give us the e-mail address or phone of a person likely to talk with us about this and identify possible steps to take to find a solution mutually acceptable?
Thanking you in advance,
FH Sarl company

Hi Usnake,
“Mobile Network code” and “Mobile country code” has not public API to third party apps.
https://social.msdn.microsoft.com/Forums/windowsapps/en-US/9dbeca88-be45-4708-bd2a-14766182a7eb/how-to-get-mcc-and-mnc-in-window-phone?forum=wpdevelop.
If you are asking for them, I suggest you send a request to
https://wpdev.uservoice.com/forums/110705-dev-platform.
Thank you for understanding.
Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to set the field non-editable in the classical report..

Hi..
How to set the field non-editable in the classical report..

Hi experts,
For the component 'ICCMP_EMP_SRCH' there is a view 'BUPAEMPSEARCH' , which has 2 context nodes 'CUSTOMER' AND 'SEARCHEMPLOYEE' , i need to add the field 'NICKNAME' which is part of the 'CUSTOMER' context node on the search screen. Currrently all the fields on the screen screen are from the 'SEARCHEMPLOYEE' context node. when i did the configuration , the 'NICKNAME' field is greyed out . I have already generated the Getter ,Setter , GET_I, GET_M methods for the 'NICKNAME' field and the context node and controller class and context class are all active .
on debugging the GET_I method, i see that rv_disabled = 'TRUE' and the current = collection_wrapper->get_current( ) is returning empty value .
for this rv_disabled to be set false , the code below is not triggered since there is no value in current.
IF current->is_property_readonly(
'NICKNAME' ) = abap_false. "#EC NOTEXT
rv_disabled = 'FALSE'.
ENDIF.
when i check for other search fields of context node 'SEARCHEMPLOYEE' , all the fields are set to rv_disabled = 'FALSE'.
can anyone suggest how to approch this. iam i missing any binding between context nodes or any activations ?
The field properties are set as Input field and the display checkbox is not checked.

How to move all contacts TO the SIM card on an N97

I have searched and while some topics exist on taking from the sim card using Nokia Suite, none address my issue of moving contacts from phone memory to the SIM Card.
I have the latest N97 and Nokia Suite updates, but I can find no way to write to the SIM card.
Thank you in advance to anyone who can help!
Solved!
Go to Solution.

Firstly there is a limit to the number of contacts you CAN copy yo sim, but it is vey simple to copy them !
Open Contacts>Options>Mark/Unmark>Mark All>Options>Copy>Sim Memory
and that's it
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

The sims 3 non parte più !!

Similar Messages

Maybe you are looking for