The size in reamweaver CS6

Hi! I'm having problems in Dreamweaver CS6 with the size of the page. When watching it in 100 %, it's not 100 %. What I mean is that a size 12 text is smaller in my Dreamweaver than when watching i site in my browser with 12 in text size. And if I zoom in when using dreamweaver, the text becomes pixeled and hard to read. What to do?

When I work with the pages in design or live view they are smaller than in the browser, even though It says 100%.
Skickat från min iPhone
28 feb 2013 kl. 16:47 skrev "Jon Fritz II" <[email protected]<mailto:[email protected]>>:
Re: The size in reamweaver CS6
created by Jon Fritz II<http://forums.adobe.com/people/JonFritzII> in Dreamweaver - View the full discussion<http://forums.adobe.com/message/5110463#5110463

Similar Messages

Will Adobe ever fix the UI text font size issues in CS6 apps?

Having recently installed CS6 on my new Windows computer, I find some serious issues with font sizes in the user interface (and not only in Dreamweaver, but in several--but not all--the applicaitons). You'd think that with a 27-inch screen, font sizes wouldn't be a problem. And you'd be wrong.
The irony is that some text is properly sized. Commands in the menus. For example. But the menu names are not. The text of items in the File tab is correctly sized, but the name of the File tab is not. In the Manage Sites dialog box, the title bar text is properly sized, but the text within, including button labels, is not. IN almost all of these cases, text is just plain way too small to read. It looks like the programmers made a HUGE boo-boo: they sized text in pixels, not only a no-no in web diesgn, but a no-no in applicaiton design.
Because on a 27-inch screen with a resolution of 1920x1080, UI text in Dreamweaver is all plenty large and readable, while on a 27-inch screen with a resolution of 2560x1440, UI text all over the applicaiton is too tiny to read--and made worse by putting the text on a gray background, reducing contrast, yet another design no-no.
CC is NOT an option--and properly should not be for any occasional user. Do not even think of suggesting it as a "solution."
This is clearly a bug (did Adobe do any testing on higher-resolution screens before releaseing CS6?), and one I wonder if it is unique to Windows systems (as Apple has had similarly high-resolutiopn screen for its displays and iMac lines for quite some time now). Or is it uniquely a Windows 8 issue?
Finally, is there at all a workaround? I can find nothing in the Settings dialog box that would control the size of UI text. Perhaps there is a text-based configuration file that could be modified to change the size of UI text. (Yeah, having configured autoexec.bat, config.sys, win.ini, and similar files back in the day, I do know my way around configuration files--if they are still used.)

twritersf wrote:
Having recently installed CS6 on my new Windows computer, I find some serious issues with font sizes in the user interface (and not only in Dreamweaver, but in several--but not all--the applicaitons). You'd think that with a 27-inch screen, font sizes wouldn't be a problem. And you'd be wrong.
(and not only in Dreamweaver, but in several--but not all--the applicaitons).
What made you think that you should complain to Adobe about Windows display problem? Adobe and Microsoft are two different companies competing against each other.
However, you might have display problem and the best way to resolve this is by going to:
Control Panel >> Display
Follow the online instructions.
Please not, you go to control Panel from within the windows itself NOT from DW.
Hope this gets you started or you can ask in the Windows Forum on Microsoft Website.

Is there a plug in to resize the canvas size in Illustrator CS6? Not the artboard, the canvas size

Is there a plug in to resize the canvas size in Illustrator CS6? Not the artboard, the canvas size

Reckon that’s what he must mean
Are you sure, Steve?
Kurt may agree.

My eraser tool acts weirdly. Everytime i use eraser tip on my pen, I cannot change the size of it with either tablet wheel or brackets. It changes the size of a brush tool instead. This was not happening in CS6.. Any ideas?

So this problem is annoying me. Is there any setting that has been added and this got messed up or is it a bug? In CS6 I could turn around my pen and use the eraser tip and change the size of it.
Now in CC 2014 I can't do it. I have to manually click the Eraser tool, and then change the size. I must say this is annoying as hell.

Reset the tool? What do you mean?
EDIT: Never mind, i found out how to reset. I Ctrl+Right clicked and reseted both brush and eraser but it still doesn't fix the issue. I also downloaded PS CS6 version and it works fine there.. So I don't know what it is. Must be a bug in CC 2014..

Changing the UI font size in InDesign CS6?

How can I change the UI font size in InDesign CS6 (as with Photoshop CS6)?

It's not possible, sorry.

In CS6, why the file size remains same after croping? And how do I reduce the size after each cropin

In CS6, why the file size remains same after croping? And how do I reduce the size after each croping? Thx

Select the Crop Tool and check the box [ ] Delete Cropped Pixels and you should see a reduction in file size. With the box unchecked, the data is still maintained in the document, you just can't see it.
-Noel

I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

Thanks for the help. I installed CC and it fixed everything but Photoshop. I guess I will have to use my old laptop for images until Adobe fixes the problem. Do you know of a place where we can send issues like these to Adobe?

What is the file size of photoshop cs6 set up

what is the file size of photoshop cs6 set up

Whatever you define it to be.
By the way, you probably mean the file dimensions in pixels (so many pixels wide by so many pixels high), not "file size".

How can two pictures of the same size still appear to be a different size? (Photoshop CS6 problem)

I called the big webdesign file "(X)" and the image I wanted to paste in it "(Y)",
so that you won't be confused when you read it.
What Happened
For the design of a webpage, I made a photoshop-file(X) with a lot of squares(X). These squares(X) had the size 9,42×9,42 centimeters.
I measured the squares(X) carefully and also made sure the size was in centimeters, so I am sure that the size was 9,42×9,42 cm.
My plan was to fill the squares(X) with pictures(Y). I had a map on my computer with a lot of square-sized JPG-images(Y) in it. All I had
to do was open the pictures(Y) in photoshop, change the size into 9,42×9,42 centimeters and copy+paste them into the squares(X)
of the webdesign. I did this before and it worked perfectly.
But then, I opened one of the images(Y) and when I wanted to resize it, the resize-tool said it was only 3,25×3,25 centimeters big.
I thought it was strange, so I copied+pasted it into the design-file(X) with all the squares(X) that needed to be filled. Allthough photoshop
had told me that the squares(X) in the file were 9,42×9,42 centimeters big and the image(Y) I resized was 3,25×3,25, the "small" image(Y)
turned out to be bigger then the squares(X). And when I resized the "small" image(Y) into 9,42×9,42 centimeters, it was even bigger
than it was before. How can this be, and how can I still make the images(X&Y) the same size?
What I already tried
- I made the file of the webdesign(X) with all the squares(X) into one layer, copied the file(X) and opened a new file(X) with the same
measurements of the old file(X). I also changed the resolution of the file(X) into pixels/centimeters instead of pixels/inches.
Then I pasted the image(X) of the old file into the new file. I didn't work; the image(X) that I pasted in the new file was bigger and
when I pasted the other picture(Y) in this image, the same problem was still there.
- I also opened the picture(Y) in photoshop, made a screenshot of it and then pasted the screenshot into paint. With paint I cropped
it again and saved it as a JPEG-file. After that, I opened the image (Y) in photoshop again. It now had the size of 11,27×11,27 centimeters.
Then I resized the image(Y) into 9,42×9,42 cm, but it still wasn't as big as the squares(X).
Could you help me please?
I really don't understand why this problem is happening and I can't think of a solution because I am still quite unexperienced with photoshop
and I also couldn't find the answer on the internet. I assume the solution is very simple, but I haven't found it yet allthough I have to finish this
project soon and I also have to use the image(Y). So any help would be very appreciated.
Thanks,
Simone

You need to understand the basic of a digital image.
Image is recorded as pixels and image is a rectangle so many pixels wide and so many pixel high. Pixels do not have a fixed size. The images resolution setting defines the image current pixel size.
So for example if you have and image that is 300 pixel wide and 200 pixels high and set its dip resolution to 100DPI the image size is 3" wide and 2" high. Set its dip setting tp 300DPI the image size becomes 1" wide by 2/3" high. Both the 3" x 2" and the 1"x2/3" images have the same 60000 RGB Colored Pixels.
Web pages are sized to to be so many pixel wide and so many pixel high. Often the height is not enforced scrolling is used when viewing.
However image for web pages often must not exceed so many pixel wide and high for displays have a fixed resolution and a fixed number of Pixels. You want images to fit on users displays. Users use different displays some have high resolution displays and other have low resolution displays with far fewer pixels then high resolution displays.
Web Image are normally image that have been interpolated down in number of pixels a resampled large image so that web image will fit on a low resolution display with limited number of pixels. The image size the user see depend on the display they are currently using. A low resolution display's image will be much larger then the same image displayed on a nexus 10 with a 300dip display. Cheep low cost Desktop LCD have a 84DIP resolution, large high cost desktop displays are not be much higher in resolution somewhere near 108DPI. Tablets, Laptop and Phones can have much higher resolution like the nexus 10 300DPI IPS display

How do I reduce the size of an AI CS6 file when saving as a pdf?

I'm trying to save an ai file to a PDF to send to the printer but the file is huge. How can I reduce the size without losing quality? I have already rasterized my images and flattened the artwork. Thanks!

How huge is huge? Are all of the images Placed at 100% or have they been scaled? What are the printer's requirements? What are the physical dimensions of the file? And, how are you creating the PDF? There are a few ways to minimize size, starting with the file itself and the printer's requirements. I find, sometimes, Exporting > TIFF > Open in Ps > Save As Photoshop PDF is helpful. I also use Distiller which trims files nicely and is customizable.

How can I change the INTERFACE SIZE in PHOTOSHOP CS6?

Hi! I was just wondering how can I decrease the sizes of the interface in Photoshop? (e.g. the tool bar). My screen resolution is 1366 x 768, and most of the tools in Photoshop is occupying a bigger space in my screen. I feel that I can paint better if they are smaller. Do you have any idea how can I decrease the size of this interface?

I would collapse and expand the toolbar windows by using the double arrow icon?
Doing this will almost give you your full screen?
Or you can hit 'Tab' and it hides your tools when you don't need them?

Why is the brush tool in Illustrator CC inferior to the brush tool in CS6? It has less control of fidelity and smoothness. It is terrible - and I'm an illustrator. Can I use the CS6 brush engin in CC?

I loved the brush tool in CS6 Illustrator- by turning fidelity to the lowest setting, and smoothness down to zero, pumping up pressure sensitivity, it accurately reproduced the fine shapes of a drawn stroke. I'm an illustrator, so I don't want artificially smoothed curves, I want the line I drew.
This works really well with my Wacom Cintiq tablet... but now CC has removed this level of customisation for the brush tool. WHY? The program is called Illustrator, and as an illustrator, I can tell you having an accurate and finely adjustable brush engine to illustrate with is very important to me and to lots of other people who can draw, and draw for a living.
Now you get this dumbed down control panel when you double click on the brush tool icon- just one slider, with only 4 steps from 'accurate' (not very) to 'smooth' (almost indistiguishable from 'accurate')... it is like I have contracted a nerve disease - I draw a line, and it forms into something quite different to the path my pen took. WHY? Can I get rid of this rubbish engine? Trying the blob brush - what is the point of this brush? It is just like the old brush, except for a cursor that shows the largest size for pressure sensitivity... and it has the same crude 4 step smooth/accurate adjuster, that doesn't change the line much at all. I have the latest driver in my Cintiq, so I don't think that is the issue, and CS6 works better than CC.
I am very disappointed, Adobe. Do I have to go back to CS6 for all my Illustration work? Please improve the CC brush tool controls.
I am still reeling from Adobe's quiet removal of a whole tool: Inverse Kinematics/Bone tool from Flash CC JUST when I was finally using it to animate, but that's another story.
Honestly, having use them for a while, Photoshop,
Illlustrator, InDesign and Flash CC are, as far as I can tell, no step up at all from CS6, except that you have to pay for them forever.

More on this, now becoming known as the CC pencil tool fiasco, on these fora:
Re: PLEASE PLEASE adobe. The new pencil tool has become unusuble to me
Re: Changing line fidelity with CS6 Brush Tool
Re: All pressure sensitive brush presets gone!
If you are affected by the lower accuracy controls for CC's brush or pencil tools, use this Bug report/Feature request form to let the folks at Adobe know- they are actually hopefully going to fix this.......
thanks to Daniel for setting this up:
hey all, if you are going to file a bug report (as per Neeraj's suggestion), i've made up a draft to make the process easier. feel free to adjust it as much as you want, obviously; trying to equip us busy folk.
Obviously customer service & product development are two different departments, so if you're bummin out on the new functionality, submit a bug report!
link to submit bug report:
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
******BUG******
Concise problem statement:
I was told to by Neeraj N(staff) to report this issue based on this link : (http://forums.adobe.com/message/6065706).
The Pencil / Brush tools have lost essential functionality with the addition of the new accurate / smooth adjustment preset. Users are no longer able to specify high-accuracy pen mapping, as the finest accuracy setting is now set to 2.5px (legacy versions allowed accuracy to .5px).
I would think adding additional slider nodes to allow more accurate mapping (while still using the accurate / smooth preset) allow for a minimal change in programming with a maximum return for power users.
Steps to reproduce bug:
1. open illustrator
2. use either pencil or brush tool.
3. draw erratic and high detail shapes
Results: shapes are smoothed to 2.5px smoothness, even when the accurate / smooth adjustment preset is set to full accuracy.
Expected results: shapes have minimal / no smoothing to maintain the integrity of the artwork.
Thank you for your consideration.

Problem in PDF creation (the size of the page different or the content cut)

Hi everybody, i have a random problem when i save PDF from illustrator (CS6 o CC, the same): if i open a saved PDF in illustrator is correct both the size of the page that the content. if I open it in Acrobat I see the size of the page different or the content cut, does someone know how can i solve it? Thank you!!!!Acrobat visualization
Illustrator visualizatin

Hi, please can you tell me exactly where can i check who you say?!!!!!
The biggest problem is not only th visualization, but when i use this PDF in my Kodak workflow i obtain proof prin cutted so bad!!!!!
Thanks for the answer!!!

Custom page size in Illustrator CS6 and CC

Hello,
send video with error Illustrator CC, which is not renewed custom page size. I have to click to another page and then back up to the size of their own.
In Illustrator CS6 it worked.
More can be seen on video here: http://screenr.com/3lxH
Perhaps the developers will notice and correct the error. Gradually I will send videos with the latest Illustrator's mistakes than the older versions.
Regards
Aleš Ulrych

Hi,
Sorry for the delay in response.
@Jacob: Thanks for forwarding this thread.
Will it be possible for any of you to have a connect session with me. I want to debug your machines.
Please do let me know your preffered timings, I will schedule the meeting accordingly.
Regards,
Raghuveer Singh
[email protected]

How to decrease the size of an Image in iAD

Hello, there!
I am trying to producer a new slide where I can write text in iAD.
I have problems with it though and can you please tell me how to add new slides, where I can either write text or add new objects or assets?
Also when I try to use the CAROUSEL, I can only put it there, but once I put the asset image on it, it doesnt work - I can't place the image in the center of each boxe and it doesn't go full screen once I click on on it through my iPod Touch (5th Generation).
Please answer me those questions and I would be very happy indeed

You may want to use Image > Image size... and dial in the sizes you want.
Set your units to mm in the dialog. Turn off resample and you can adjust the final print size.
What I am showing you is called "scaling", changing the print size without throwing out pixels as resample would do. Your image is intact. This is from CS6, but it should be about the same in CS5.
Gene

The size in reamweaver CS6

Similar Messages

Maybe you are looking for