The Size Of My Other Doubled In Less than 12 hours

I synced my phone last night around 7 pm and the other was about 365 mb. I have only installed 1 app (Last.fm) since then and I synced it again this morning and now my other is almost 900mb! Anyone know what caused this/how I can get other to take up less room (I know deleting text messages cuts down on the other, but besides that what can I do?) Thank you!

Hi Bridner,
It looks like the iPhone will have to be restored. This article: http://support.apple.com/kb/HT1414 will walk you through restoring an iPhone.
My guess is, this was caused by disconnecting the iPhone during the sync process.
-Jason

Similar Messages

Can I change the size of a photo image to less than 6KB?

I am trying to reduce the image size on i photo to less than 6KB or to less than 80x80pixels,
on a photo that was imported from photo booth, is that possible?

You can certianly get the 80 x 80. Crop the image to square, then File -> Export and you can set the maximum dimension in the Size field in the Export dialogue.
Regards
TD

HT201401 How do i reduce the size of my Other file to increase storage capacity?

How do i reduce the size of my Other file to increase storage capacity? I have almost 4.5g taken up of storage in Other on my 8g phone.

Use search or check out the "More Like This" section to the right to find answers to the question.

Limit the no of segments per IDOC to less than the current default value

Hi friends,
please help me in the following issue.
The possibility to limit the number
of segments per IDOC to less than the current default value.
Purpose is to limit the traffic of IDOCs between systems.
How to solve this issue to avoid traffic
Thanks in advance.
Regards
Sandeep

Hi Kiran,
Actually we are using standard ones at that time we are getting prolems. When using custom developed ALE's
we are putting segment size is less.To decrease segment size is there any filtering at the sender side? To change segment size may be nedd to take help form SAP.
But if have filtering at any level from sender side need to confirm before consult SAP.
Regards
Sandeep

SharePoint 2010, Visual Studio 2010, Packaging a solution - The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi,
I have a solution that used to contain one SharePoint 2010 project. The project is named along the following lines:
<Company>.<Product>.SharePoint - let's call it Project1 for future reference. It contains a number of features which have been named according
to their purpose, some are reasonably long and the paths fairly deep. As far as I am concerned we are using sensible namespaces and these reflect our company policy of "doing things properly".
I first encountered the following error message when packaging the aforementioned SharePoint project into a wsp:
"The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters."
I went through a great deal of pain in trying to rename the project, shorten feature names and namespaces etc... until I got it working. I then went about gradually
renaming everything until eventually I had what I started with, and it all worked. So I was none the wiser...not ideal, but I needed to get on and had tight delivery timelines.
Recently we wanted to add another SharePoint project so that we could move some of our core functinality out into a separate SharePoint solution - e.g. custom workflow
error logging. So we created another project in Visual Studio called:
<Company>.<Product>.SharePoint.<Subsystem> - let's call it Project2 for future reference
And this is when the error has come back and bitten me! The scenario is now as follows:
1. project1 packages and deploys successfully with long feature names and deep paths.
2. project2 does not package and has no features in it at all. The project2 name is 13 characters longer than project1
I am convinced this is a bug with Visual Studio and/or the Package MSBuild target. Why? Let me explain my findings so far:
1. By doing the following I can get project2 to package
In Visual Studio 2010 show all files of project2, delete the obj, bin, pkg, pkgobj folders.
Clean the solution
Shut down Visual Studio 2010
Open Visual Studio 2010
Rebuild the solution
Package the project2
et voila the package is generated!
This demonstrates that the package error message is in fact inaccurate and that it can create the package, it just needs a little help, since Visual Studio seems to
no longer be hanging onto something.
Clearly this is fine for a small time project, but try doing this in an environment where we use Continuous Integration, Unit Testing and automatic deployment of SharePoint
solutions on a Build Server using automated builds.
2. I have created another project3 which has a ludicrously long name, this packages fine and also has no features contained within it.
3. I have looked at the length of the path under the pkg folder for project1 and it is large in comparison to the one that is generated for project2, that is when it
does successfully package using the method outlined in 1. above. This is strange since project1 packages and project2 does not.
4. If I attempt to add project2 to my command line build using MSBuild then it fails to package and when I then open up Visual Studio and attempt to package project2
from the Visual Studio UI then it fails with the path too long error message, until I go through the steps outlined in 1. above to get it to package.
5. DebugView shows nothing useful during the build and packaging of the project.
6. The error seems to occur in
CreateSharePointProjectService target called at line 365 of
Microsoft.VisualStudio.SharePoint.targetsCurrently I am at a loss to work out why this is happening? My next task is to delete
project2 completely and recreate it and introduce it into my Visual Studio solution.
Microsoft, can you confirm whether this is a known issue and whether others have encountered this issue? Is it resolved in a hotfix?
Anybody else, can you confirm whether you have come up with a solution to this issue? When I mean a solution I mean one that does not mean that I have to rename my namespaces,
project etc... and is actually workable in a meaningful Visual Studio solution.

Hi
Yes, I thought I had fixed this my moving my solution from the usual documents to
c:\v2010\projectsOverflow\DetailedProjectTimeline
This builds ok, but when I come to package I get the lovely error:
Error 2 The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. C:\VS2010\ProjectsOverflow\DetailedProjectTimeline\VisualDetailedProjectTimelineWebPart\Features\Feature1\Feature1.feature VisualDetailedProjectTimeline
Now, the error seems to be related to
Can anyone suggest what might be causing this. Probably some path in an XML file somewhere. Here is my prime suspect!
<metaData>
<type name="VisualDetailedProjectTimelineWebPart.VisualProjectTimelineWebPart.VisualProjectTimeline, $SharePoint.Project.AssemblyFullName$" />
<importErrorMessage>$Resources:core,ImportErrorMessage;</importErrorMessage>
</metaData>
<data>
<properties>
<property name="Title" type="string">VisualProjectTimelineWebPart</property>
<property name="Description" type="string">My Visual WebPart</property>
</properties>
</data>
</webPart>
</webParts>
.... Unless I can solve this I will have to remove the project and recreate but with simple paths. Tho I will be none the wiser if I come across this again.
Daniel

TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
Other Errors and Warnings
1 error(s), 1 warning(s)
Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
Thanks,
Altaf B.

Hi AltafB,
For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The amount of down payment must be less than the invoice amount

Hi all,
Our customers are using SAP 2007-PL15 and SAP 2007-PL41.
When we want to create a down payment for a sales order, and we want to pay the entire amount of the sales order, including tax, we have to put an amount inthe TOTAL field of the Down Payment window since by default, the down payment amount is the total of the invoice before applying tax. The DPM is
higher than 100% (strange but I think it's normal since the down payment is not planned to take the tax in consideration).
Then, we create an incoming payment for this down payment. It's ok.
Then, we create an invoice based on the sales order we have paid with the down payment. It's impossible to use the down payment for the invoice... why that ? We receive the error 'The amount of down payment must be less than the invoice amount'. This causes big headaches to our customers !!
Could you explain us what to do please ?
thanks,
Luce

I'm very sorry, I have a similar question in dealing with AP Down Payment Request Linked to AP Invoice, my case like this:
1. I created 3 AP DPRs,their amount are each 100,000 RMB(for example, their document number are 10,11,12). then do the outgoing payment fully paided.
2. I created a AP Invoice with the amount 150,000 RMB(for example, this AR Invoice document number is 5). I use the buttom"Total Down Payment",and selecet AP DRP No.10 and 11. When I click the buttom"Add",an error shows:
The amount of down payment must be less than the invoice amount
and I don't know how to continue.....
Many Thanks
Kam
(PS:My English is poor,forgive me please. Shall I Speak in Chinese? then I can describe this question more clearly.)

Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.

Hi, Im trying to get the whole path in my server, so i tried that with this following code
Get-ChildItem $sourceFolder -Recurse | ?{$_.PsIsContainer} |Get-Acl
But then, it showed me somtehing like this :
Get-ChildItem : The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters.
I tried to find the solver everywhere and mostly they propose to change the path name, which is impossible, since I am working with my company server, and those folder have already there before i start to work here, then the other ask me to use robocopy,
but all of the trick just dont work
is there any way to solve this problem? thanks

There is no simple solution to this. And it is not a limitation of powershell itself, but of the underlying NTFS file system.
If the problem is that a folder with a name longer than 248 exists anywhere within your directory structure, you are hooped.
If the problem is that some fully qualified path names exceed 260 characters, then, in those cases, the solution already given is to create a psdrive partway up the path from the drive letter or server/share root of the path. Unfortunately, the output produced
will be relative to that psdrive and not to what is specified as the $sourcefolder.
unless you already know where those problematic paths are, you might consider trying to trap those errors and have your script figure out where it needs to create psdrives. You might then be able to calculate the equivalent path for each file or folder and
output that. the programming effort would be simpler to just created a psdrive for each folder encountered, however I expect that would be very inefficient.
Al Dunbar -- remember to 'mark or propose as answer' or 'vote as helpful' as appropriate.

How do i deauthorize one computer in itunes when the limit of 5 authorizations was reached less than one year ago?

How do I deauthorize just one PC in itunes when the limit of 5 authorizations was met less than one year ago?

the authorized 5 are one computer

Rogers is saying that IOS4 won't allow use of the personal hotspot with a plan of less than 1GB data. I say it's a policy of theirs, not an iOS restriction. Anyone know the truth?

Rogers is saying that IOS4 won't allow use of the personal hotspot with a plan of less than 1GB data. I say it's a policy of theirs, not an iOS restriction. Anyone know the truth?
I call BS but the tech guy was insistent that the iPhone can detect what plan I have and won't enable the feature and there's nothing they can do about it, short of selling me a larger data plan...

robfromkelowna wrote:
Actually it does. It's wrong to lie to a customer. By blaming Apple, they shift the blame and make it seem like there is nothing they can do about it. If they admitted it was their policy, I could complain and try to get it changed or I could move to another carrier.
If a person killed someone and blamed it on a heart attack, the person is stil dead, does it matter? Either way they're dead, right... (extreme, I know, but illustrating a point)
Wow.
It is certainly Rogers policy and is not unusual at all among carriers.
Seems like a non-issue to me, but apparently being "lied to" ( perhaps the employee was simply mistaken, it happens) is a major deal to you.

Should i wait for the iPad 3 or get the iPad 2. my birthday is only less than a month away but rumours are that it will be released around my birthday

should i wait for the iPad 3 or get the iPad 2. my birthday is only less than a month away but rumours are that it will be released around my birthday

Check with sites like MacWorld, engadget, iLounge, MacRumors, CNET. Latest talk is an early March announcement.

Why did the price for Doctor Who double in less then a week?

Last week the price for Doctor Who (Seasons 1-4) were $10 each. Now they are $24-27 each.
I know they are trying to make a profit- but did it have to be such a drastic price change? i find it very frustrating.
i'm only sixteen and i could justify for buying ALL the Doctor Who seasons for like $78 but now its almost double that price.
just one question Why?

It was likely a sale price that you saw last week and this week, it's back to the regular price.

Why is the lightning cable so fragile that in less than 3 months I have had to set 3 cables aside because they don't charge anymore?

In less than 3 months I have had to buy 2 more cables... None work anymore... Why is this cable so fragile that even though I don't twist or turn it, it ends up malfunctioning all of a sudden? The regular 30 pin cable has a much longer "life cycle". I bought an adapter and am charging my devices (iphone5 and mini Ipad) with it. Is there anynsuggestions to what i should do with these cables that are no longer working and are still almost brand new?

Had a similar problem. Lightening cable is not up to the job, it gets twisted easily and breaks. Had the old type on an IPhone 4 that has lasted over 2 years, but the lightening lasted less than three months. Cardiff store did not want to know about this problem and tried to sell me a new one for £14.00, absolutely shocking aft sales care.
Contact Apple direct and you will get much better service

With my KLIPSCH - the FIDELITY and REAR VOLUME is signaficantly less than the front chan

I had always been using KLIPSCH PRO AUDIO speakers, and I must say - they are simply incredible. I just bought another complete set of KLIPSCH 2. for the rear channel of my AUDIGY LS card ---- but and the FIDELITY and VOLUME is significantly less than the front channel. Is it that card? Is it the synthesized rear volume because it's not true 4 channel? It's that CMSS Or should I just hook up the rear to the front channel with a simple y connector?I want to hook up my whole whose with satellite KLIPCSH and just a few subwoofers.And I want to do with that LS card and Y connectors.Am I correct here - or do I need something MORE?__________Joliett

Please tell me if I'm right...the rear speakers input from a stereo source is not true 4 channel. So the fidelity and volume is somewhat different than the front channel.
To get the same fidelity, I need to use Y-connectors to join the fron speakers to the rear.
Or is there a soundcard that is better for that kind of installation?

Homepage is full screen but all other pages 50% less than full screen

homepage full screen all other pages less than full screen

Yep, same problem for me. Only started happening two days ago.
BBC Homepage completely blank. No source code shows up either. Get the following response header (from Webdev toolbar):
Date: Thu, 12 Aug 2010 10:05:58 GMT
Server: Apache
Vary: Accept-Encoding
Content-Encoding: gzip
Content-Length: 20
Connection: close
Content-Type: text/html
500 Internal Server Error
I don't think I've added any new addons recently. And it only happens in Firefox, not IE or Chrome. And bizarrely, like the poster above any BBC subdomains are fine, like bbc.co.uk/sport, or /news.
I'm on a Windows XP PC, running FF 3.6.8. Very odd issue and seems very few people are having it going by Google search. But bizarre that, for all of those that do have the problem, it happened on Tuesday.
Any help 'ppreciated.
Rob

The Size Of My Other Doubled In Less than 12 hours

Similar Messages

Maybe you are looking for