The software could not be found on any servers at this time

Hello,
Within the last few days OSD from within the OS has started to fail. The error it provides is
The software could not be found on any servers at this time. I find this error misleading since I can PXE, connecting to the same server, and the OS installs without issue.
For giggles I did try and install some updates and other software from the server and they installed using Software Center. With that my boundaries are setup and the client is communicating with the DP.
Distribution Point='http://<server.domain>/SMS_DP_SMSPKG$/Content_f90faa01-0846-4704-9d86-d788273ab397.1', Locality='LOCAL' ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_50cea2c8-29cb-48c4-830b-571f72e14c04.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_d5a14c61-8ab2-4ec9-808a-ab6f89ab56f8.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_0ea10922-95d6-4751-a3da-3dab19e70fa4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_310e7d49-0dd2-479b-886d-9c822ff214c4.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_cc2d6253-a90d-489b-b294-7eb3ed645029.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_a41d3047-5a90-400b-bc76-7808ff0c8503.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_fed1abf3-ab3b-45ef-9c20-8a419c2a13b6.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_879fade3-5b18-4959-bb2b-bc8a9bed1f71.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_16bba65e-16a6-49bd-b757-536e65ff94f1.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_4a8abdc6-2c2e-4f4c-b2ab-38306ba90425.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_0b1e115f-d8cf-4b2a-944e-bdd888c1775e.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_384b9d17-1502-467a-99ca-2669f0d1b5c7.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_68117c8a-50c3-4b95-9e3e-965238fe749a.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
Requesting locations synchronously for content Content_a38b2000-a2d6-4974-8409-827a76ad1b17.1 with priority Medium ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
The number of discovered DPs(including Branch DP and Multicast) is 0 ContentAccess 1/13/2015 9:18:31 AM 6392 (0x18F8)
I have a feeling the final line is the indicator to my problem, but I dont understand why. Unfortunately this seems to be happening at other sites as well.
Edit
I checked the boundary groups and made sure that they had at least 1 site server assigned. I also checked the permissions of Production (not-working) to Test (working) and they line up. When I choose 1 application/update to install the line
The number of discovered DPs (including Branch DP and Multicast) is 0
changes to 1. I also do not have the servers DP set to pre-deploy, if I recall that is the wording on the first tab of the DP settings. Also browsing the HTTP address provides results.

Hi,
The task sequence for unknown and known is the same.
That is what I want to confirm. I did more research, and some indicate boundary issue:
https://social.technet.microsoft.com/forums/systemcenter/en-US/75b22009-48ea-43b6-8992-b1f3d3bbe51c/the-software-could-not-be-found-on-any-servers-at-this-time
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

PCNS -- forest Subdomain -- the SPN you Specified could not be found on any accounts in this domain

Hello there Fim lovers,
i'm having few issues with PCNS hope you can help out,
so my Active directory Infrastrucutre is made out of a Root Domain "company.net" and lots of subdomains
"sub1.company.net", "sub2.company.net" ....
the FIM Server and service accounts are all in the Root domain and my users are in the subdomains as is the case usually...
i ran the setspn on the service account in the root domain then ran the pcnscfg on the subdomain DC where my users are stored...
i get the following warning :
The Service Principal Name you specified could not be found on any accounts in this domain. (which is normal since the service account is in the root domain)
did i do smthn wrong ? or can i ignore this warning ?
thanks for any help !!!
Hitch Bardawil

Hi,
Check this note - KBA 1671522, it holds good for RFC also.
Arun

I've imported several CDs that are "collections", with songs by various artists. Only a PORTION of the song info appears in iTunes, and, when a song is "clicked-on" to play it, a message appears that the "song could not be found". Any ideas ?

The CDs are imported into the "iTunes Media" folder, under "Compilations". Each CD has a folder, with the name of the CD. However, EACH SONG in the folder is assigned a sequential number as a prefix before the song's name. For example "2-1 Sunshine of Your Love." This prefix, I believe, prevents the song from being imported into the iTunes library. The song's name appears in the iTunes library (with the number prefix), BUT no other song info (artist, CD name, time, etc.) shows in the iTunes library. I am NOT designating these CD's as "complilations", but somehow, iTunes is arbitrarily assigning them to this "Compilations" folder, and then assigning sequential numbers to each song. I am confused. (My only remedy is to MANUALLY remove the prefix number from each song in the CD folder, within the COMPILATIONS folder, then "re-import" it into iTunes. Cumbersome.) Thanks in advance for any opinion, tips or guidance.

The numeric prefixes in filenames are probably the optional disc number, followed by the track number. iTunes will pick up the Compilation flag from the Gracenote CDDB database if you ripped the tracks with iTunes, or the flag may have been set earlier if these are existing tracks you have imported into a new library. The iTunes naming convention is <Artist>\<Album>\[<D#>-]<T##> <Name>.<Ext> where Album Artist is used instead of Artist if not blank, and Compliations is used instead of Artist when Part of a compilation is true. Empty Artist or Album values are replaced with Unknown Artist or Unknown Album respectively. With Windows, file and folder names are limited to 40 characters. If more than one file is added with the same details subsequent tracks get suffixes to separate them.
If iTunes can't find a file that usually means that it has been moved after it was added to the library. Select a single broken track and press CTRL+I to Get Info. Look on the summary tab at the location that iTunes expects to find the file. Where is it really? Post back both paths and I might be able to figure out what has happened, and suggest a fix.
tt2

Failed to read data from report file Reason: The table could not be found.

BO Enterprise XI R2, cannot publish crystal reports using the publishing wizard.
Failed to read data from report file Reason: The table could not be found.
Any ideas to get around this would really help out.
Regards

Connection used Views, ODBC System DSN is setup properly.
Approach for import from business view manager and import wizard. both methods failed to import the Business View and underlying reports.
I figure I may have imported the Business View wrong? From Business View Manager I exported from my dev server then imported to prod server.
Apparently I learned exporting my business view also includes the Data Connections that the Business Views are dependent upon.
So which ever folder you specify it copies it there. Originally the all Data Connections Resides on the root folder. To return it to the original location. I deleted what I had exported. Exported this time to the root folder, then only deleted the business views, foundation, elements. Then exported again to the folder where I intended then only deleted the Data Connection.
Makes any sense? So I then had to re point the business views and all the dependent objects to the data connection that resides in the root folder.
I tested the connection, it works fine. I properly updated my crystal reports to the business view in production. Did a sample extract it works as expected.
However when i try to publish, either from Crystal or Publish wizard i get the same error?
As a work around i am thinking, after updating the business view in the crystal reports, shall i re map the fields?? or reexport the business views again?
Any help will be surely appreciated.

Could not save as (file name) because the file could not be found

When i try saving sothing it comes up with could not save as (file name) because the file could not be found and need to save this file. i could save stuff before but not anymore if anyone could help i would be grateful
im using photoshop cs5.1
Thanks keiron

We cannot know. These kinds of things are operating system errors with stuff getting blocked due to insufficient permissions, security tools interfering, network errors or whatever. Since you mentioned none of that, it's an "Ask your mom..." thing at this point, but if you provide more details, someone might be able to figure it out.
Mylenium

My IPod will not sync with my computer. The word IPod appears in the bar at the top right area of the screen, then a message box appears stating that my IPod could not be found. Any suggestions?

My IPod will not sync with my computer..The work IPod appears in the upper right area of the Itune window, then a message box appears stating that 'download could not be copied to the IPod because it could not be found'. Any suggestions?

- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- try another cable
- Try another USB port
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Photoshop Elements 6: Could not use type tool because the file could not be found

Using Adobe Photoshop Elements 6.0 well for a while.
Tried to use the Type Tool to overlay text and obtained this error:
Could not use the type tool because the file could not be found
After research, I reset all tools, tried to repair (failed: insert disc one), and then removed/re-installed. Still have the same problem.
Are the system fonts corrupt or is an Adobe .ini file suspect?
Other reports have suggested using a 3rd-party font manager to inspect/disable fonts.
First wanted to post this error here for feedback/recommendations
Any suggestion on how to recover the Type Tool functionality?
Eric Edberg
Adobe Photoshop Elements Repair Workaround
When trying to repair the well-known: insert disc one, error occurred. Was able to successfully repair the installation by dragging the entire Adobe Photoshop Elements directory from the original CD-ROM onto a hard drive and executing locally. Seems it does not like repairing over the CD-ROM but it works correctly if the install source is on disc...

John,
Yesterday, I decided to completely remove all Adobe products: PSE 6, Premiere 4, Reader, ActiveX plugins & legacy/old uninstalled product directories that Adobe has left turd-lets around including old Acrobat 3/6 directories. Used A/D Software to remove all adobe products and then followed your instructions AND the instructions on Adobe's support web site to manually remove these products.
It boiled down to manually removing the entire Adobe directory in Progam Files, "saving" the entire Adobe directory structure in each users (3) Document and Settings in the Application Data and Local Settings (as instructed by you and Adobe) and rebooting.
I also saved the local All Users "configuration" database/cache that contained the Tag and other information to make sure the system was clean
This included following the manual Regit instructions to remove legacy Adobe registry hives. I deleted all keys for all Adobe product trees that I could locate (following instructions from Adobe).
Reboot
Scheduled a CHCKDSK on all drives and rebooted
Dragged my complete image library to an archive location and deleted them on the C: drive
Did a complete system Defrag
Re-installed Adobe and alas still have the same problem with the Type Tool....
The only thing I did not do was selectively remove the "fonts" because various instructions seemed to indicate many are "required" by the windows or other applications and I was not really sure how to identify which ones were safe to remove w/o affecting the core system.. I'll have to re-read these instructions next.
Microsoft has a "Font Validator" tool, but that only checks 1 font at a time and you have to read the "results". May look for other tools.
Will be able to check the font structure this weekend since it will take some research before I'm comfortable just removing fonts in trial/error mode. I'll need to make a backup image of my computer before I start this (just in case).
Thanks for follow-ups too!
Eric Edberg

New Installation Failing w/Error: The update could not be found.

On a new 2008 R2 server (Standard), using the Add Roles Wizard, I tried adding WSUS but it fails with "The update cound not be found. There may be a network connection issue. Click here for more information."
Clicking there takes me to the "Resolving WSUS issues" pages with refereces to Microsoft. The first is the most relevent:
"If you receive the message “The update could not be found. There may be a network connection issue.” when you try to install WSUS, refer to the information in the Network and Sharing Center Troubleshooting Guide."
Clicking on the link to the "Network and Sharing Center Troubleshooting Guide http://go.microsoft.com/fwlink/?LinkId=140135" takes me there (so there are no connectivity issues) but nothing seems to apply to my issue. I can browse the internet just fine and have even went in and manually installed various required components like IIS, .NET Framework 3.5.1, and Windows Internal Database but still no luck. I even downloaded the file "WSUS30-KB972455-x64" and tried running that without success. What am I missing?
Thanks in advance.

On a new 2008 R2 server (Standard), using the Add Roles Wizard, I tried adding WSUS but it fails with "The update cound not be found. There may be a network connection issue. Click here for more information."
To install WSUS as a role, the candidate server must either have an active Internet connection to obtain the WSUS installation package from Microsoft Update, or be configured to update from an existing WSUS server with the WSUS3SP2 Dynamic Installer package already approved. If the R2 server is configured to use WSUS and the WSUS3SP2 Dynamic Installer package is not approved for installation for the group(s) in which the R2 server is a member, then you may also encounter this situation.
and have even went in and manually installed various required components like IIS, .NET Framework 3.5.1, and Windows Internal Database but still no luck. I even downloaded the file "WSUS30-KB972455-x64" and tried running that without success. What am I missing?
That's hard to say. Running the installer should not have presented any issues, but then you've not shared the exact details of that particular failure, which almost certainly would have been different from the previous failures encountered using Server Manager. Of course, successfully running the installer presumes that the server has been properly prepared and prerequisites have been properly installed and configured. I would be concerned that you don't seem to have referenced and followed the explicit instructions documented in either the Step By Step Guide or the Deployment Guide, so this is a high probability source of the cause. (Note: .NET Framework 3.5.1 is NOT a required component, the Windows Internal Database does not require manual installation for WSUS, and if IIS7 is not properly configured with the exact requirements for WSUS, the installation will fail.)Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2010)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com

The DLL could not be found error

I have upgraded the IMAQdx on Real-Time Desktop target from 3.7 to 3.8 version. After that all imax functions in LabVIEW and MAX return same IMAXdx error "The DLL could not be found". Does anybody know what happens and how to fix this problem? I have tried uninstall the IMAQdx and then insall it again. This does not help.
Sergey

Yes, it is activated on my laptop that I use to upload software to real-time target (real-time desktop on NI 8354). Unfortunately I cannot find the procedure to activate IMAQdx on real-time. It works fine before IMAQdx upgrade and I cannot remember any additional actions I have performed when I have install it first time.
Sergey.

Crystal report error (The table '' could not be found)

Dear Expert,
As I know, the end user who don't want to edit the crystal report design no need to buy crystal report,right?
Using the 'Crystal reports for SAP B1', they already view the report.
But, how about, if I had created one crystal report, and then I want to distribute to end user. When I load the report on user machine that dont have crystal report, the system shown an error (The table '' could not be found).
I think, maybe because of the database location. When I create the report, of course I made connection to my machine as a source of database location. But, how i'm going to change the database location to user machine?
Is it when we login into SAP, did SAP auto detect the new location source? And will auto create connection to the crystal report?
Thanks in advance for any help.

Hi ,
We do not create the database connection for the end user. the end user must have the same database connection as it is set up on your machine. The report is looking for the same connection, with the same access into the database.
Best regards,
Jadie

The item could not be found? Moved/renamed - TURN OFF?

So often I get this error message when using the Favorites panel in Adobe Bridge CS4:
"The item could not be found. It may have been moved or renamed."
Sometimes it's a misclick, sometimes I forget my external isn't plugged in and am clicking on a folder on an unavailable drive, either way that message pops up then it deletes that entry!
Is there any way to avoid this? Sure I can readd the item later, but it's a pain to have to remember where it was, and put it back in the favorites (when the drive is reconnected, etc)
In Mac OS X if you remove the original and have a shortcut/favorite left for it, it doesn't delete it, just puts a question mark - if you should re-insert the drive/folder etc - the ? disappears and your original Shortcut is restored - why doesn't Bridge operate like that? I'm constantly re-adding things to the Favorites panel, why?
If there isn't a way to avoid it, I'll repost in Feature Requests.. Thanks!

Hi Ramon-
I get that same message all the time and the folders in my favorites are always the same and on my internal HDD... yet every time I reopen Bridge and click any favorite, I get this message.
I wind up using Favorites as a one time use only feature... but even then, it's a PITA since I have to delete all the "moved" ones the next time I open Bridge.
I thought this was a pref issue and have deleted plist files and recreated them but that hasn't helped.
any ideas?
running imac 10.6.1 and mbp 10.6.1 and CS4 (updated)
thanks,
tom

Could not save preferences because the file could not be found (Windows) then Error 1 on PS,AE,PR,ID

I was trying out Photoshop, everything was running fine then one day when I close it I get an error:
"Could not save preferences because the file could not be found..."
Now when I boot it I get the Configuration Error 1.
After Effects still boots, but it reset all my preferences there. For example the workplace layout was reset, all my saved Output presets were removed and my memory-cache and performance settings were reset again.
Premiere and InDesign get the error too and won't boot.
This is the second time it has happened, I'll try wiping every Adobe program and reinstalling all over again, but it had run fine before for a while and it randomly happened.
Any idea how to fix this?

Nope I havent touched the Documents folder.
Forgot to mention that I'm on Windows 7

Error in File ****.rpt: The table could not be found in

Hi ,
I have a Crystal Report which uses a stored procedure to get it's data.
The stored procedure has no parameters but it is pretty complex and gives a resultset in the end with a select statement.
I designed the report in CR 11.5.12.1838.
The report works perfect in crystal reports designer.
Unfortunately I am getting an error in Central Management Concsole and InfoView
The error is:
Error in File ****.rpt: The table could not be found.
I am using ODBC connection and I even used to sa credentials to run the report in CMC but had no luck.
One thing I should mention that the stored procedure name as ;1 in the end.
I appreciate if you could help me with this report
Thanks

The SQL profiler RPC completed shows:
exec sp_tables N'My[_]Procedure [_]Name[_]Has[_]Underscores,N'%',NULL,NULL
and it's variations. Nothing else and that returns no result.
My procedure name has underscores, I will get rid of that.
I will recreate my Stored procedure without underscore or any special characters and let you know about the result
Umit

Flash Builder 4.5 the import could not be found

I just upgraded from Flash Builder 4 to 4.5 and have imported one of my FB 4 projects. I am now seeing an orange question mark in the gutter next to all of my import statements that are importing local classes (as well as everywhere the said class methods are used) and an orange underline appears under the import statement. When I hover over the underline it says that the import could not be found.
The class files do in fact exist and the project compiles and runs without a problem (I use ANT to build this project).
If I open one of the class files in question then change something (i.e press space bar) and hit save then go back to the file importing it the orange question mark is gone for that import, I get the code assist and CTL+Click links me to the class file. However, if I close that file and reopen it again cannot find the class file.
The classes in question are stored under my project's src dir as:
- src
+---com
      +---myappname
          +---services
          +---utils
          etc...
and my import statements look like:
import com.myappname.utils.*;
import com.myappname.services.remoteService;
Any ideas? Is this a FB 4.5 "enhancement"? I've tried deleting and re-importing the project, refreshing the project and am now kind of at a loss of what to do. It's annoying enough that I may need to downgrade to 4.

Thanks for the reply srvikram13, I really appreciate it.
Unfortunately this did not solve my problem. The application was developed in Flex sdk 4.1 and I have installed the 4.1 sdk and told the Flex Compiler to use that specific sdk to no avail (I even re-tried per your post, but no success). The fact is that the project compiles fine with either 4.1 or 4.5 sdk, it just has issues finding the imorted classes until I manually open the class files.
Further debugging and info:
I actually thought I had it fixed for a second. I renamed my "com" directory and right clicked on "src" and chose "New" > "Package" then repeated that for each directory under "com". I then closed FB and in windows explorer copied my original com directories into the new one created by FB. When I launched FB and opened the main file all my imports were recognized! I then closed FB and re-opened again to see if it was truly fixed and ... epic fail. The squiggly underlines are back and FB doesn't recognize any reference to them.
I also found that even if I navigate to the class files in the Package Explorer then right click on the file and choose properties, then click cancel (never opening or changing anything) the reference to that specific file is now valid... at least until I close and reopen FB.
Any other ideas?

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.

We have an SharePoint services 3.0 installation that uses custom web parts on 100s of subsites. The custom web parts on any website is presenting this error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.
This past weekend we decided to create a new database server and migrate the databases to the new server in an effort to retire an old box.
INitially we attempted to go through the configuration wizard which didnt do anything but add a new database server to our farm. What we have done is remove the new database server from the farm and use an alias on the SP server to continue to use
the same name but actually get its data from the new database server.
Everything works with the site except these custom webparts.
Any thoughts on where to go to first, should i redeploy what i think are the webparts from VS 2005 (solutions are VS 2005 slns.)?
Tony Spaulding

You need to make Safe Control enteries in your web.config for the particular web application.
Open web.config
Locate the SafeControls Tag
Make a safe control entry
<SafeControl Assembly="Assembly name, Version=1.0.0.0, Culture=neutral, PublicKeyToken=d8eb6481d8b4beec" Namespace="your webpart namespace" TypeName="*" Safe="True" />
In order to find the assembly details, Open the GAC. Right click on your dll and then click properties.

The software could not be found on any servers at this time

Similar Messages

Maybe you are looking for