The software freezes and I have to restart the program again.
I have no problem with the software while I'm actively using it. But if I leave it for a couple of minutes it often freezes and I have to restart the software. This is a real problem as I often work with this software all day and have to restart it many many times during a day.
Hi Barbara,
Thank you for your answer. Win 8 and Elements Organizer 11.0.0.0
Similar Messages
-
I am running Windows XP and I have an iPhone 4, but ever since 5 days ago I cannot even open up iTunes without it freezing my PC. This happens with our without the phone plugged in. I have uninstalled and reinstalled iTunes in the correct order and still it is happening. Can anyone help with what might have changed in my PC settings? TIA
You could try wiping the hard drive and reinstalling the OS and all your programs.
Did you install any programs yesterday?
If not it may be best to take it to an Apple care center and have it checked out. Take it in while it is asleep so you ccan show then what is happening. -
TS1424 As soon as I open itunes store the computer freezes and I have to restart any ideas thanks
Can anyone help with the above please, Linda Winter
Try... iTunes unexpected quits, freezes, or launch issues
Here > http://www.apple.com/support/itunes/troubleshooting/ -
Somebody please help me, this is very frustrating
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these steps in order until the issue is resolved.
-
My phone keeps saying the storage is full so I deleted pictures, apps, and all my texts. Then after I do this my phone freezes and I have to restart it. When I restart my phone then everything I deleted comes back. What is going on?
HI Shelby,
It sounds like your available free space is not reporting properly. I would start by quitting the Settings app:
iOS: Force an app to close
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the device and test the issue again:
iOS: Turning off and on (restarting) and resetting
If the issue persists, backup your device to iTunes, then restore it as new and verify that it works.
How to erase your iOS device and then set it up as a new device or restore it from backups
If it does, then restore your backup to either verify it still works and the software just needed reinstalled, or isolate the issue to the backup file itself.
Thank you for using Apple Support Communities.
Regards,
Sterling -
As stated I'm having trouble with my computer, I boot it up and within a few minutes it freezes and I have to restart it, I tried updating it to the latest mavericks but it won't finish the installation it's stuck at the end, what can I do to fix this? I need it for homework tonight.
Crowntheme,
you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it still freeze after a few minutes? -
Every time I close a document on Pages the software crashes and I have to force quit. Then I restart the program and all the docs that were up at the time of the crash reappear. I haven't lost any work yet but it's super annoying to have to restart everytime I try to close a doc. Any ideas on how to fix this problem?
Do you have Pages '09?
Have you tried that? If so what happens?
Peter -
I tried to update the software overnight, and it was still in the beginning stages of the progress bar when I woke up. When I restarted the process I have to restore the phone, its again stuck in the beginning of the process. Does anyone know how long this should take? The beginning sections seemed to fly by.
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
Why since installed Lion on my IMac it happened many times that my computer freeze and I have to restart everything before something work again?
To get rid of "pop-up ads and other crap on my computer when I am on the internet", click on Safari in the Menu bar, and select Preferences. Next select Extensions. Delete all of them. Restart Safari.
The first step in addressing the black screen is an SMC reset.
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
Excerpt from
http://support.apple.com/kb/ht39 -
I have a MackBook Pro I updated to Maverick and now my internet won't open and all my programs freeze and I have to restart my computer. The only program that doesn't freeze is Microsoft Word.
Back up your documents and everything else important to you, not that there is any reason to believe your hard disk may be failing, but the symptoms you describe may presage an impending disk failure, and you should have backups anyway.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting:
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Go to his website, download and run EtreCheck:
http://www.etresoft.com/etrecheck
Etrecheck will be in your Downloads folder. Open it from there. You may see the following dialog box:
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well. -
What do I do to straighten out this problem: When I try to access Firefox after I've logged out of a previous session I get a msg that Firefox is still running and I have to restart the computer in order to access internet...
All you need to do is wait. While Firefox appears closed, it's not. It doing house cleaning. Cleaning out cookies and cache. How long it takes depends upon how much garbage you have collected.
If you start the Task Manager and open the Process window, you will be able to see when Firefox has finished up and closed down.
If you forced Firefox to close using the task manager, then the house keeping process seems to freeze up.
Also, as you've already found out from the above link, some programs and plugins will prevent Firefox from closing properly. I've found this less common then simply being in a hurry. But you need to also consider it. -
ok i need to unlock my ipod but i don't know my password i use itunes but i need to update at the same time this srcews up the itunes and i have to restart the computer i need to restore the ipod please help
Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Maybe here:
Trouble installing iTunes or QuickTime for Windows
iOS: Device not recognized in iTunes for Windows
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP -
Whenever i download files, many times it stops before downloading completely and i have to restart the process by visiting the site. Suppose the file is 20 mbs, but it downloads only 2-3 mbs, reports that download is complete, but its just a part of that.
It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files -
My quicktime videos will not play on my hp envy (windows 7). the computer freezes and i have to res
my quicktime videos will not play on my hp envy15 (windows 7 64). the screen goes black, freezes and i have to restart.
I have tried to open files by opening itunes or quicktime or media player. I have been able to play the videos broefly but then they typically freeze.Uninstall Quicktime, Then reinstall it.
http://www.apple.com/quicktime/
THX -
When I click options in addons/extensions the addon window freezes and I have to use the task manager to end the process. Any solutions?
There may be a problem with one of the files that stores details of installed extensions. Try deleting these files as shown in the "Corrupt extension files" section of this link - https://support.mozilla.com/kb/Unable+to+install+add-ons
Though that article is not specifically about your problem, the method shown in the corrupt extension files section may help. When you restart Firefox after deleting those files, the list of installed extensions is rebuilt and this will hopefully fix your problem.
Maybe you are looking for
-
Teaching Myself Python. How Can I Stop The Program From Closing :)
I wrote a program today that will log into a router here at work and check if the line protocols are up and if i can see thir mac address. If i run it from the IDLE program it works fine. When i run it as just crosnet.py it runs fine but closes bef
-
Hi. I want to send an acknowledgement email whenever a user submits an service ticket / complaint saying that we have recieved your email and our agents will get back shortly. 1. Where do you configure this setting. 2. When the agent searches his inb
-
Permissions Web Service Requests
Okay, I'm moving from "Groups" to "Permissions". This post is just an FYI-not sure it's a bug or a feature-or even a little bit of both at the same time. In the "Permissions" web service requests (AddPermission, etc.) if you do not specify either a P
-
Merging WSDL and sending it to a test webservice
Hi All, I have four wsdl to merge into a single wsdl and import into XI and use it a source data type. The wsdl contains different namespaces in it. Could anyone guide me the procedure step-by-step to do it. Any help is really appreciated. Can I send
-
I just downloaded the trial for Photoshop Creative Cloud, and nothing is working. I can't seem to access any software to see how it works. Any sugesstions, Lil_Blue