The software is cutting off about 1/4 of the right hand side of the frame. Is there a fix??

the software is cutting off about 1/4 of the right hand side of the frame. Is there a fix??

unrecobc
You said important word "mod". Are you dealing with mod widescreen files? If so, there is a serious problem with them in Premiere Elements 13. I have written about this in detail.
So, let us rule out or in the above before going further.
Please see if the details written about in the following apply to your situation....
ATR Premiere Elements Troubleshooting: PE: 13 Serious Problem With .MOD Widescreen Files
I have also posted a thread here on the subject. But Adobe Staff has not seen it or has not found time to respond to the matter.
Premiere Elements 13 Major .MOD Widescreen Concerns
Please review and consider the above, and let us know if this applies to you.
Thank you.
ATR

Similar Messages

I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

I have iMovie application open, but the iMovie application keeps disappearing off the right hand side of the screen and and I can not see it, even though the application is open..help, please!

Thanks. I don't know why it wouldn't just go back there when I tried putting it back? I didn't change anything, so I assumed the new "default" was over on the left. Glad it was a simple solution after all.

FF not printing right hand side of the web page using MAC OSX

FF is not printing out the right hand side of the web page. 1/2 to 1 inch i text is just cut off. Never had a problem in the past with this. Just happened, I believe after I upgraded FF. I am using MacBook Pro OSX.
== This happened ==
Every time Firefox opened
== I believe after I download the new FF update

Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
I have had problems with Firefox printing pages through most of the Firefox versions. I have tried printing in different ways to no avail.
Among my attempts:
printing to pdf, printing selected text, scaling down the page, using the print mode if the art. offers one. None seem to fix the problem.
Not only does the right margin text get cut off but oftentimes only the first page prints, the rest of the article doesn´t. It just happened again so I went to Safari and the problem disappeared. I believe there´s a serious problem here.
Below see a shot of what the preview of a 12 page article becomes when printed.
http://www.npr.org/templates/transcript/transcript.php?storyId=128222247

HT1481 my ipod shuffle is not showing up in my itunes window on the right hand side of the screen

My Ipod shuffle is not showing up on my Itunes window on the right hand side of the screen? It is a new one.

Hi Brittcal,
Welcome to the Support Communities!
I would recommend making sure you've run your Windows software updates, and then follow the steps to remove iTunes and reinstall the latest version. Here are a few articles to help you with this.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Syncing music to iPod shuffle
http://support.apple.com/kb/HT1719
I hope this information helps ....
Have a great day!
- Judy

TS3274 Email display problem: My email only display the list of emails and a preview (first two lines of the body of the mail). If one click on the message it only shows the heading on the right hand side of the screen, but not the content.

My email only display the list of mails in my in box with a preview of the first two lines of the body of the message. When one clicks on the message to open it, only the header is displayed in the right hand side of the screen - the actual message is missing. This happens on older mail previously downloaded that use to work properly as well. Any idea how to fix this?

Try closing the Mail app completely and see if it works properly when you re-open the app : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work also do a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Need to check tls/ssl but getting stuck with "You must provide a value expression on the right-hand side of the '-' operator."

I would like to disable ssl 3 but need to test what sites only support ssl 3. I keep getting stuck with an error that is over my head. I've tried manipulating the string a dozen different ways and keep getting the same error. I am not familiar with -notin
or how to specify which part of the property its checking: thanks a ton
http://blog.whatsupduck.net/2014/10/checking-ssl-and-tls-versions-with-powershell.html
line with issues:
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
You must provide a value expression on the right-hand side of the '-' operator.
At S:\scripts\test23.ps1:50 char:126
+ $ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name - <<<< noti
n @("Default","None") | %{$_.Name}
+ CategoryInfo : ParserError: (:) [], ParseException
+ FullyQualifiedErrorId : ExpectedValueExpression
<#
.DESCRIPTION
Outputs the SSL protocols that the client is able to successfully use to connect to a server.
.NOTES
Copyright 2014 Chris Duck
http://blog.whatsupduck.net
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
.PARAMETER ComputerName
The name of the remote computer to connect to.
.PARAMETER Port
The remote port to connect to. The default is 443.
.EXAMPLE
Test-SslProtocols -ComputerName "www.google.com"
ComputerName : www.google.com
Port : 443
KeyLength : 2048
SignatureAlgorithm : rsa-sha1
Ssl2 : False
Ssl3 : True
Tls : True
Tls11 : True
Tls12 : True
#>
function Test-SslProtocols {
param(
[Parameter(Mandatory=$true,ValueFromPipelineByPropertyName=$true,ValueFromPipeline=$true)]
$ComputerName,
[Parameter(ValueFromPipelineByPropertyName=$true)]
[int]$Port = 443
begin {
$ProtocolNames = [System.Security.Authentication.SslProtocols] | gm -static -MemberType Property | where-object{$_.Name -notin @("Default","None") | %{$_.Name}
process {
$ProtocolStatus = [Ordered]@{}
$ProtocolStatus.Add("ComputerName", $ComputerName)
$ProtocolStatus.Add("Port", $Port)
$ProtocolStatus.Add("KeyLength", $null)
$ProtocolStatus.Add("SignatureAlgorithm", $null)
$ProtocolNames | %{
$ProtocolName = $_
$Socket = New-Object System.Net.Sockets.Socket([System.Net.Sockets.SocketType]::Stream, [System.Net.Sockets.ProtocolType]::Tcp)
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $ProtocolName, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$ProtocolStatus["KeyLength"] = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus["SignatureAlgorithm"] = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
$ProtocolStatus.Add($ProtocolName, $true)
} catch {
$ProtocolStatus.Add($ProtocolName, $false)
} finally {
$SslStream.Close()
[PSCustomObject]$ProtocolStatus
Test-SslProtocols -ComputerName "www.google.com"

V2 version:
function Test-SslProtocols {
param(
[Parameter(
Mandatory=$true,
ValueFromPipelineByPropertyName=$true,
ValueFromPipeline=$true
)]$ComputerName,
[Parameter(
ValueFromPipelineByPropertyName=$true
)][int]$Port = 443
begin {
$protocols=[enum]::GetNames([System.Security.Authentication.SslProtocols])|?{$_ -notmatch 'none|default'}
process {
foreach($protocol in $protocols){
$ProtocolStatus = @{
ComputerName=$ComputerName
Port=$Port
KeyLength=$null
SignatureAlgorithm=$null
Protocol=$protocol
Active=$false
$Socket = New-Object System.Net.Sockets.Socket('Internetwork','Stream', 'Tcp')
$Socket.Connect($ComputerName, $Port)
try {
$NetStream = New-Object System.Net.Sockets.NetworkStream($Socket, $true)
$SslStream = New-Object System.Net.Security.SslStream($NetStream, $true)
$SslStream.AuthenticateAsClient($ComputerName, $null, $protocol, $false )
$RemoteCertificate = [System.Security.Cryptography.X509Certificates.X509Certificate2]$SslStream.RemoteCertificate
$protocolstatus.Active=$true
$ProtocolStatus.KeyLength = $RemoteCertificate.PublicKey.Key.KeySize
$ProtocolStatus.SignatureAlgorithm = $RemoteCertificate.PublicKey.Key.SignatureAlgorithm.Split("#")[1]
catch {
Write-Host 'Failed'
finally {
New-Object PsObject -Property $ProtocolStatus
$SslStream.Close()
Test-SslProtocols -ComputerName www.google.com
¯\_(ツ)_/¯

VERTICAL SLIDING BAR ON RIGHT HAND SIDE OF THE SCREEN HAS DISAPPEARED - HOW DO I GET IT BACK PLEASE?

VERTICAL SLIDING BAR ON RIGHT HAND SIDE OF THE SCREEN HAS DISAPPEARED - HOW DO I GET IT BACK PLEASE?

This issue can be caused by the Babylon Toolbar extension
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

In the previous version of Firefox you would open a new tab by clicking on the small "Open New Tab" button at the Right Hand Side of the Tabs. This button has now disappeared in my upgrade.

I just installed Firefox 4. In the previous version you would open a new tab by clicking on the small "Open New Tab" button at the Right Hand Side of the Tabs. This button has now disappeared in my upgrade. Firefox help still says you can open a new Tab by using the "Open New Tab" Button so how do I get it back??

I got it back by going to "customize toolbar" and hitting "restore default set"! Now there is a small tab next to my open tabs with a "+" on it.

Having two main windows on left hand side and Right hand side of the form

Hi
I have a requirement in SMARTFORM where the required output will be a single form design, approximately A3 in size, split by invoice details on the left side and delivery details on the right side.
As the Invoice details and the deilvery details will have multiple line items
I am planning to create two MAIN window one for the Invoice on the Left hand side and the other for the delivery on the Right hand side of the form.,
Will this work or is there any other solution to do the same .
Regards
Senthil

No, it's not possible to have 2 main windows. It will let you activate the form but will run into dump.
If invoice details on left and delivery details on right are one on one then you can create one table with separate columns for each having all the details in one internal table. If not there could be other work arounds depending on your requirement.

Vertical menu on right-hand side of the screen with submenus to the left

Hello, I am new to muse and am trying to make a vertical custom menu on the right-hand side of the screen. When I try to add submenus, they always appear on the right of the top-level buttons. How do I move these to the left? Thanks in advance, Nick

You will have to edit the CSS rules to have a negative offset relative to the parent element. Though, to be honest, it's a terrible idea in terms of usability.
Mylenium

Can i move the trash bin from the right hand side to the left (i am left handed)

can i move the trash bin from the right hand side to the left

Sorry, but I never use full screen for anything except an occasional web video. These are my Dock settings and the 66 icons on it take up little real estate.
This is what mine looks like, SL version.

Adobe Captivate 7 crops right hand side of the selection window

Just installed a new copy of adobe captivate on a brand new laptop and have found that it is cropping/cutting off the right hand side of my selection. If i snap to the application window of choice, it is selcting the correct area. After i have finished recording and press "end" key, it shows slides with a large chunk of the selction missing from the right. Have updated the software, but still the same issue.

Please see the reply to your other thread where you reported the same issue.
Click here to view
Cheers... Rick

I cannot save PDF files that has a lock on the right hand side of the tab in safari iOS 5 from my iPad. Please help to find a solution.

Can someone help find a fix of how to save PDF files from safari in iOS 5.0.1? The PDF files show a lock on the right hand side of tab. Only these lock PDF cannot be save. Any help will be highly appreciated.

I assume that you have iBooks or GoodReader or Adobe Reader - some app that will open PDF files so my suggestion would be to start with the basic things, restart your iPad, reset it or quit Safari and restart.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
In order to close/quit apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off.
To power up hold the sleep button until the Apple logo appears and let go of the button.
The lock to the right side of the tab indicates that the website is secure - or at least that is what it looks like in Safai on my iPad. Sites with the https in the address have the lock icon in the tab, non secure sites - web pages without the https - do not have the lock icon. I'm not sure if that has any bearing on it - none of the PDF files that I have opened in Safari have the lock icon.
But if you can open the file - it doesn't make sense that it would be locked??? Try the basic suff and see if any of that helps.
Message was edited by: Demo

While importing pictures I cannot change the import settings on the right hand side of the panel. I would like to change the date format.

Apparently I am missing something (stupid). Suggestions are welcome. I'm a novice with Lightroom. Just migrated from Aperture.

I am going to assume that what you meant about changing the date format is that you want to change the way the date is formatted in the renamed file. Is that correct? To do that, you need to tell Lightroom you want to rename your photos during import. On the right hand side panel of the Import dialog is a section on File Renaming. Open that up and you will find a Template drop down box. This is where you can build a file renaming template to fit your needs or you can create a custom one. If you do create your own, make sure to save it as a preset if you want to reuse later. There are all sorts of ways to rename your files with several different date formats to choose from.
Another possibility is the subfolder option for where you are going to store your imported folders. If you chose to Organize By Date, you can also use the Date Format drop down box to choose a date format. This will cause Lightroom to build a folder for each date found in photos you are importing a create a separate folder for each day found. So, if you had three batches of photos from three separate days, three new folders would be built by Lightroom and the photos created on day one would be stored in the day one folder. Same for day two and day three.
Finally, if you don't like the format of the capture date or one of the other dates fields stored in the metadata, you are out of luck. You can change the date but not the format.

My screen has a blank section on the right hand side of the screen

since installing updates my screen has a blank section on the right hand side which remains on start up and operation

Hi @Graham1957
Welcome to the HP Support Forums!
I understand that the display has a blank area on the right side, after some updates were performed. I am happy to help with this.
The quickest thing to try would be a system restore. Using Microsoft System Restore (Windows 8)
Choose a restore point from before the problem started, and let me know if this makes any difference. If not, then please post the full product number and verify the operating system in use on your notebook. See the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

The software is cutting off about 1/4 of the right hand side of the frame. Is there a fix??

Similar Messages

Maybe you are looking for