The Software that came with my book does not work. CISCO CCENT / CCNA ICND1 by wendell odom
Hello this is my first post on cisco support and hope I can get some help. I recently purchased the book CISCO CCENT / CCNA ICND1 by wendell odom and when I used the CD to install the Pearson Practice exams, it does not work. I tried everything! It even asks for a activation code, which on the CD It says "Refer to the Activation Code Included in the DVD Sleeve when Registering Pearson IT Certification Practice Test Software"I don't see anything related to a Activation Code anywhere on the CD OR on the sleeve! So now I can't use that.
The Network simulator Wendell odom uses in his videos is already outdated it seems and I can't get mine to work. Why? Because I bought this book in hopes of this being a beginner book and praying the person won't skip information to actually set up the book. So now the videos are useless because I can't connect because I have no idea how...
The Network Simulator lite, wow 3/3 When giving me software to use. The Prompt command does not work, Only the enter key will work but when I try to put in a password I can't hit anything else but enter.
I hope I can get help from a more official member as to seeing how I bought this book and I can read but whats really the point if I don't have the hands on training?
Keunepete,
When I ordered my books for the ICND1 and ICND2, they came with a CD in the back pocket (sleeve) of the book. Along with the CD was a thick piece of paper that had the activation code on it. It was a white, square piece of paper with big black print on it. Did you buy your book used? Was the CD sealed in the back pocket?
-Zach
Similar Messages
-
The mouse that came with my imac does not work very well in a window virtual machine
I finally got Windows 7 on my iMac and am using FusionVM. I installed one of my favorite games and the mouse goes soooooo slow I cannot use the game. Any suggestions? I am using the mouse that came with the iMac, magic mouse(??).
I have already tried that. The mouse speed on the iMac is good. The mouse speed in other Windows7 programs is good. The problem arose when I tried to play Zuma's Revenge using Windows7. This is the first game I have loaded since setting up the virtual machine.
-
I have a large video on my ipad that I need to transfer to my PC (a window 7). I could also use a windows 8 if that would help. But all of the applications I have tried do not see this large video (52 mins) even though they transfer smaller videos fine. The ipad will not let me trim the video, saying it is too large. This is true even though I only want to trim the original, and not create a new video. (Actually it refuses before it gets to the choice of creating something new or just eliminating something from the original). I have been to an Apple store, but the people there only could recommend that I try some alternate applications to do the transfer (Kodak EasyShare). I don't have much faith this will work. I think I have this application on an old PC, and it is not something I want on my new computers.
Is it possibled the size of this video just violates the transfer formats for files over USB? If so, I will just delete the video and move on. But the video is really something I wanted to save. I would be happy to eliminate most of the video, but the ipad will not let me trim it.
I also tried to import the video with Windows Moviemaker (free with W7). It also does not see this file, but works fine on the other videos on the ipad.How to Transfer Photos from an iPad to a Computer
http://www.wikihow.com/Transfer-Photos-from-an-iPad-to-a-Computer
Importing Personal Photos and videos from your iOS device to your computer.
http://support.apple.com/kb/HT4083
iTunes: Frequently asked questions about viewing and syncing videos
http://support.apple.com/kb/HT2729
Also check out the Photo Manager Pro app.
https://itunes.apple.com/us/app/photo-manager-pro/id393858562
Cheers, Tom -
I can't download the software that came with my ipod
I'm having trouble downloading the software that came with my photo ipod 20G even though i have windows 2000 professional. It comes up with a message when the cd starts loading saying that i need a higher form of windows. I think it might have something to do with the SP4 business but I don't even know what that means, let alone how to find out whether or not I have it. And if i don't, does anyone know how i could and would it be as difficult as changing to windows XP. (My mum said it cost her $1300 changing it at work)
ThanksWelcome to Apple Discussions!
You can download the software here...
iPod Updater Download Page
iTunes Download Page
But, I am not sure how that helps since you need the admin password...
btabz -
my iphone 4 wont connect to my laptop (windows 8) via usb but it will however register that it is there via 'photos' im not using the cable that came with my phone, does that affect the connection?
i just want it to connect to my itunes again!!!
Thank you to anyone and everyone that manages to help!Hello webster995,
Thank you for the details of the issue you are experiencing with your iPhone not appearing in iTunes. I recommend following the steps in the article below to troubleshoot the issue you described:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Is there a way to enable 3D display outside of the software that came with the device?
Hello,
I just bought this device and my primary use for it is the 3D function, but unfortunately there is no option to enable or disable the 3D function outside the set of software that came with it. For example in Cyberlink Power DVD 3D works fine, TriDef software creates depth from games but that is not actually what I need. I need just to have an image or a sequence in standar over-under or side-by-side formats and to enable the 3D effect on the display.
Some third party software, Stereoscopic player for example recognizes the monitor fine and displays the 3D content normally. But what I need is to display a full screen image from After Effects so I could have a live preview of the 3D, is there a way to somehow engage the 3D mode by some utility or driver?MHetlerovic, welcome to the forum.
I read the manual thoroughly and it doesn't appear that there is any way to access the 3D mode without using some type of program.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Troubleshooting after reinstalling the software that came with my macbook
Hi, I'm a new user of mac products and my macbook crashed refusing to start up (it would just turn on and keep loading till froze).
I followed exactly the steps "Problem meet solution" in the little manual and had to use the Mac OS X Install Disk 1.
The disk utility repaired the HD volume (error found: incorrect block count for file flatfile.db - should have been 708 instead of 354), then still couldn't start up on HD. Did it all over again, repaired HD again (this time error: incorrect block count for file .store.db - should have been 5202 instead of 2601), but this time went further selecting "continue" and reinstalling Mac OS X from the discs that came with my macbook. Reinstalled - successfully finally - by chosing the option "previous settings archived in new file".
The only problem i had was at login ... it would not recognize my user password... which was the same one since i first turn on my new bought macbook. Anyways, i used again the disc 1, selected change my password and this time i managed to sign in with the new one (same old user).
1)NOW, question: do i have to re-update my software? Because before I had Mac OS X 10.5.2 (i always kept my computer up to date) and now, after reinstalling the software I have Mac OS X 10.5
or i should be able to reactivate them from the Previous Systems file (in this case how do i do that?
2) Can't figure still out my master password that unlocks the file vault plus i can't activate again the root admin user from Directory Utility ... i click it but doesn't do anything. Why is this and how can be sorted out?
my macbook details:
Model Name: MacBook
Model Identifier: MacBook3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 1 GB
Bus Speed: 800 MHz
Boot ROM Version: MB31.008E.B02
SMC Version: 1.24f2
Could someone help me with this? Please note it's my first time troubleshooting a computer ever and that my knowledge is not that vast in the field ... so please use simple steps/terms that i can follow.
Thank you,
LaurieThank you very much for answering so prompt to my questions.
1) yes, i will take all the updates. and ok, i won't touch the previous systems file
2) in regards to master password ... i tried all the passwords i ever used. not sure it's just "forgetting". Reason: as I mentioned before: The only problem i had after reinstalling the software was at login ... it would not recognize my user password... (and I add, nor the master password) which was the same one since i first turn on my new bought macbook.
As i couldn't sign in, used again the disc 1 to reset my administrator password and it did save but with the notice that i should "use the keychain access to reset the password for users login" .This time i managed to sign in with the new one (same old user). Then I went to the keychain clicked login and changed the password for keychain login. Did i do good? do I have to change something else. please let me know as don't really know.... i just follow help advice.
3)in regards to root password ... i had it also before ... using help on "security" issue ... as i connect to different networks ... i read that one could help ... please understand that i'm learning as i go, as this time i don't have someone else to do those things for me. so why doesn't it activate anymore? and why would it be better not to activate it?
4)speaking of learning, from my initial post where i posted the errors that my disk utility found ... what do u think caused my computer to freeze? i was browsing on safari facebook as well as I had both yahoo messenger and skype opened... first the messenger froze, then crushed, then i restarted it , then froze, then all the rest froze, without responding to force quit.
5) after reinstalling the software, i still have yahoo messenger and other applications.... is that safe to use now? they are still in my applications
and last 6) did I do everything correct when my computer would not start up?
thank you
laurie -
How can I know if the software that came with my mac is valid or pirated?
I recently purchased a MBP that came with numerous amount of really expensive software like Adobe Masterclass Collection,Logic 9, Key Note, Pages, Numbers, Final Cut Pro and many more. How can I find out if this software collection that came on the mac are valid or pirated. Is there a app that can scan my mac for serials or to verify the apps? If infact they are legit purchased, how can I put them on my other mac? or is it even possible. For example, Final Cut Pro and logic are from Apple. Could they Verify them?
Welcome to the Apple Support Communities
Unfortunately, there's not a way to check if they are original or pirated. Also, Keynote, Pages, Numbers, Final Cut Pro (if it's Final Cut Pro X) and Logic Pro, if they were purchased in the App Store, don't need a product key. My advice is to delete all those applications, and purchase again the applications you need with your Apple ID in the App Store, if they are available there.
That's because you will have problems to update them (as they are registered to the old owner's Apple ID) and you can't use them legally if you haven't purchased the applications -
I have tried to get info on this app and it does not show up on the app store any longer so i cant contact the developer about this app for support. it does not work and i feel i was cheated out of my money for an app that was supposed to play pandora when the alarm goes off but it does nothing. i need help with this.
As stated All purchased are final.
Use the e-mail receipt to Report a problem or
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
Replaced hard drive and need the software that came with laptop already loaded
i had to replace my harddrive and now i have a blank laptop. how can i get the soft ware that came loaded onto the laptop when I purchased it. express #37941750505 service # holp9m1. i also have the microsoft certificate sticker on the bottom of the laptop.
You will need to purchase a set of recovery media from Dell, if you did not prepare a set when you received the system. Call your local Dell customer service number.
-
Where can I download the software that came with my Centro?
I lost the original CD.
Thanks!
Post relates to: Centro (Sprint)Hi.. Welcome to the Palm forums. Go to http://www.palm.com/us/support/index.html, under support & downloads select downloads then select your centro and you should see a link for bonus software on your cd.
Post relates to: Centro (Sprint) -
Install software that came with the BT MM?
Hi,
Just got my Bluetooth Mighty Mouuse. Should I install the software that came with it?
Is there any benefit or added functionality in doing so?
I have a new 20-in Intel Core 2 Duo iMac.
Thanks...You'll need the software installed to configure fully the MM's buttons via the Keyboard & Mouse preferences pane (and also view the battery status). On our Mac Pro it was preinstalled, but on our Mini it wasn't. I'm not sure what the default is on the new iMacs.
-
Software that came with my Palm T/X
My T/X came with Documents to go on the disk. Does anyone know where you can download the software that came with the Palm T/X. I lost my disk when I moved
Post relates to: Palm TXHello mgrschizo, Welcome to the Palm Support Community.
There is no legal way to download the Installation Disk for the TX, due to the fact you've already mentioned - it contains copywritten software that is not "free for the taking". You can purchase the latest version of Docs to Go from Dataviz.com.
Usedpdaparts.com appears to still have some of the disks for sale though:
http://www.usedpdaparts.com/Software.html
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
I'm currently signed onto my home network and want to go on with another computer but don't remember my password for my network. Does anyone know where to find this? It's a password that I set myself, not the one that came with my router.
It's in your Keychain on the computer you usually use to connect to your network - the "kind" will be "AirPort Network Password".
Your Keychain can be opened by using the Keychain Access program. It is in your Utilities Folder.
Open Keychain Access, and type airport in the search field. You will see a number of entries. Choose the one with the name of your wireless network, open it, and check the box next to "show password". Before it reveals itself you will be asked for your login password - the one you use to log in to your MacBook.
The network password will appear in the box.
Quit Keychain Access. -
How do I reinstall some software from the cd that came with my Mac? Have tried to reinstall but when I choose customize it brings up the whole bundle for install. Thank you
What are you trying to reinstall?
Maybe you are looking for
-
Many questions...advice? iPad 2 == iPad Air in France
I have a 16 GB iPad 2 WiFi and am planning to buy a 32 GB iPad Air WiFi + cellular I'm in France, but will probably be moving to the US next year. Many questions, any answers appreciated! -I don't have a computer...my laptop committed suicide, and I
-
Below there is a program which updates an OpenOffice file, in fact a zip file. It works fine on window but on Netware I receive an exception java.util.zip.ZipException: invalid entry CRC-32 (expected oxffffffffc0f3d518 but got 0xc0f3d518) Any ideas i
-
Call RFC that return structure using VB
Hi, anyone has a sample code to call a custom RFC that returns table structure? The RFC expect parameters to pinpoint the record and return it in a structure. *Local Interface: IMPORTING VALUE(CUSTOMER) LIKE KNA1-KUNNR VALUE(MATERIAL) LIKE MARA-MATNR
-
Credit management mass change FD37 or F.34
Hi SAP Experts, I'm confused in transaction code FD37 and F.34, I can't find any documents that would discuss their differences between SAP versions. I'm using 4.6c and both transaction are existing in table TSTC, however, F.34 is executable but FD37
-
[Solved] KDE 4.5.1 constant disk i/o from /jbd2/sda4-8
I recently switched from Gnome to KDE 4.5, and have noticed one small problem, that this machine never had with Gnome. I put conky on it (and have a disk io graph on my config) and last night I noticed that /dev/sda was being accessed every couple