The software won't update and don't display
My ipad1 won't update and doesn'tshow to update software
Hello 3512931312,
Welcome to the Apple Support Communities!
I understand that you have an iPad (1st generation) and would like to update the software on it. The latest supported iOS version available to the iPad (1st generation) is iOS 5.1.1. If your iOS version is lower than that and you would like to update, I would suggest attempting the update with your computer using the instructions located Update your device using iTunes section in the attached article.
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
Have a great day,
Joe
Similar Messages
-
I need to restore my ipad but it won't restore because the software isn't updated and you can't update the software because it is in recovery mode. What do I do know?
I would take it to the apple store to get recovery mode taken off.
Regards. -
I'm trying to update my software to iTunes 10.5.2. I click on the install button, click the Accept button, the software checks for updates, and then I am back at the original download screen. I can't seem to get past this loop. Any suggestions?
If I go through the setup that you suggested, won't I screw up the existing software on my system?
No. The iTunes installer will first uninstall the existing version of iTunes and then put in the new one. (That's actually also what happens when you use Apple Software Update to install a new version ... it just doesn't show the uninstall phase like the iTunes64Setup.exe or iTunesSetup.exe does.) -
I have downloaded the most recent version of iTunes to my laptop and am smart enough to have backed up my entire phone to my laptop before updating the iOS software, but this is the third time that a software update has bricked my phone (first an iPhone 4S then a 5) and I don't have the time to go to the Apple store and wait for my everything to restore. I am running Windows updates and will restart my laptop to retry the connection between my iPhone and iTunes, but looking for suggestions.
Yeah same exact problem as me. EXACTLY. In a way I'm glad more than just me are having the problem so I know it's probably not on my end and on the apple side....I HOPE that is what it is.
MAN, a whole day and a half???? Crap I need my phone to work....
I really think it's the apple servers because it errors 3014 right when iTunes says "verifying phone....." something.... It goes away so fast I can't read the rest, but I think that is the step where it verifies phone to the apple servers, which are overloaded, I assume.
It's gotta be that. How many other people are having this same exact issue? -
Bridge won't update and doesn't display raw images from my Sony cameras.
Using new Win8.1 laptop that recently have displayed Sony Raw images.Using PS CS6 stand alone which does nothing when asked to update. Adobe asked for ID verification which I did but didn't help.
Camera Raw version 7.x only works with CS6.
You need Camera Raw 7.3 (CS6) or DNG Converter 7.3 or Lightroom 4.3 to open your 6D raw files, because it did not exist before these versions. Camera Raw updates are not usually provided for old versions of Adobe software.
Propriety raw format support can only be added after a new camera's release, unless manufacturers broadly adopt the DNG format as an alternative. Fortunately, DNG Converter is free, and you can use this to create DNG files from your Canon's raw files, to be opened in any version of CS/Lr.
http://blogs.adobe.com/lightroomjournal/2012/12/camera-raw-7-3-and-dng-converter-7-3-now-a vailable.html -
trying to update the software for my iphone and it keeps saying download has been corrupted. an same for imac update. help?
Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this
You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
I got the IOS 7.1 update and I don't like it. Is there any way that I can remove the update and return my software back to the way it was before I got the update?
Please, I really wnat to change my phone's sofeware back to IOS 7.0.6. I really don't like the IOS 7.1
PLEASE HELP ME BEFORE THE IOS 7.1 DRIVES ME INSANE!Even though it wasn't me who started this thread i would like to say that i hate iOS 7.1 too
They're back! The IOS haters.
When you get a call it has some small icons of reminding and message and one white ugly "slide to answer" bar.*** seriously?
People complained about the green bar in IOS 7.0.3. You can't please everyone with everything. Deal with it and move on. Or you can just get a Droid phone and suffer through the bizarre interface changes.
A lot of people would really appreciate a release with the old interface back.
People complained about every interface change that Apple has tried. As I said earlier, you can't please everyone with everything. The interface is what it is, learn it, deal with it, or move on to something more to your liking. I think they still make flip phones. -
I have just tried to update the software on my iPad and it is now asking me to connect to iTunes. The last time I did this it did not tell me to do this. I'm currently travelling and do not have my MacBook with my iTunes.Can it be resolved without iTunes
I hope that you can see this response. The forum software is acting quite bizarre today.
You really do want to restore with your own computer. There is an off chance that you might be able to backup first, but I really think it is a very slight chance now since you got the connect to iTunes screen. But on the chance that when you connect, it sees the iPad and allows a backup, I would to not have you wait to use your own Mac.
If you cannot create a backup, you will lose everything that you have put on since the date to the last backup. So of your last backup was three weeks ago, you will restore the iPad to the condition that it was in three weeks ago.
If you do a lot of traveling, using iCloud for backups might be a very good idea. I use iTunes primarily and I backup my MacBook Pro with Time Capsule, but I still use iCloud as a secondary backup. I don't have enough data that I have exceeded the free 5 GB that you get with iCloud, so I do use it just in case.
I can't explain what happened with the update, I can only tell you that it does happen to other users. I have never had a problem when I updated and I having been updating over WiFi since iOS 5 came out. Taking a guess, maybe an interruption in the connection - especially of you tried updating using a hotel's WiFi network, or a power surge maybe. Whatever the cause, it is most likely a one time thing. That doesn't help your situation I know, but hopefully it won't happen again. -
I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo
I tried to update the software on my ipad and now my screen is stuck on the plug and the itunes logo
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????
Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to. -
I did the iOS 7 seconds update and now my screen is just a plug and iTunes logo. I don't have a computer anymore just iPad. What do I do
Hello,
My suggestion would be to do the following:
-Press and hold the power button and home button for the time needed until the screen turns black and the apple logo reappears.
If that does not work, call the nearest Apple store and ask for assistance.
Hope this helps,
TechnologyGuy -
I updated the software on my iPad and now have none of the apps I purchased
I updated the software on my iPad and now have none of the apps I purchased
If for some reason you failed to transfer any purchases made on the ipad to your computer before updating, then you will have to redownload:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I did the 8.0.2 update and no longer have my speak to text microphone down by the smileys. Don't want to use audio text. How can I get this back?
Hey there tjbliven,
It sounds like you are not able to use the dictation feature of iOS 8, becuase the microphone icon is missing. It seems to me like Siri may be turned off, which would cause the icon to not be there:
Siri settings - iPhone
To set options for Siri, go to Settings > General > Siri. Options include:
Turning Siri on or off
That should get the dictation feature back for you.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
What do you do if you have bought a used iPad and the apps won't update without the original id and password. Can't delete the apps that come with the iPad and reinstall them so what do I do?
Correct. An app can only be updated under the Apple ID that was used to orginally acquire the app. If that is a problem you can delete the app and download again under the new userid. If you paid for the app you will have to pay again. Your old Apple ID does not go away so there is no reason to not use it to download the apps.
You cannot delete the apps that came with IOS. If you want to "hide" the apps simply put the apps into an application folder by dragging one app onto another. You can do this to all the IOS apps.
Maybe you are looking for
-
The disk could not be read from or written to----help please!!
Hey, I'm sorry if this has been posted numerous times, but I really need some help. Everytime I plug in my 30 gig 5thG ipod, I'll start to load songs on (either manually or automatically) and this message will pop up after about 50-100 songs have bee
-
In my system, when i open ALV report in Excel inplace. Excel opens report but button "Close and Return to ALV (1)" and "Exit excel" is disabled, how can it appear enabled? When i press key "ALT+TAB" excel menus and icons desapear, and when press "/"
-
ORA-00600: internal error code, arguments:[k2gUGPC: ptcnt = tcnt] in 11gR2
Dear Friends, we are using 11.2.0.2 RAC database (e-biz database) on solaris sparc (64 bit) and we are getting errors on alert log: ORA-00600: internal error code, arguments: [k2gUGPC: ptcnt >= tcnt], Please let me know the fix. Recent Change: Upgrad
-
All, I am developing a form with SAP Script. In the header window (it is a single window using the almost entire width of page format DINA4)i am using three character formats for printing heder lines ofr ex: helve 8, helve 10 Bold and Helve 14 bold.
-
I have the new IPad and am using it with the verizon mifi2200 wireless and when i am using apps the location services cannot find me wifi is working and location services is on this does not happen when i am using a wifi that is at my office or in ho