The solution to sell more than 1 milion BB devices more in 2012

Hello everybody.
Sorry for my bad denglish. (i'm german).
I'm proud to present the most valueable methode for RIM to sell more than 1million devices more in 2012.
For a RIM softwaredeveloper it's the easiest thing to do.
Put the most important thing back to BB calendar.
.....the number of week...
before apple does it.
and success will be on bb site.
You can contact me to ask where to put the money for the best idea of the year (or century).
TEW

Why not create an application which does this for you... sell it and make all the money yourself?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How to allow access to my airport extreme network for more than one wirelss device at the same time

I received a Kobo Vox ereader for Christmas and have not been able to connect to my home wireless network. It works with unsecured networks and I tested it out at an Apple reseller with their airport extreme netwok and it connects fine.
It seems as if I cannot have more than one wireless device connected to my home netork at the same time.
So here is what I did to test this out:
- I powered off the Kobo vox
- I shut down my macbook
- I turned off the modem and unplugged the power cord and removed the cable connection from the modem.
- I also unplugged the airport extreme router.
- I waited for about 15 minutes and then set it all up again and turned on the power to the router and the modem
- I turned on the kobo vox (I left my laptop shut down)
- my kobo vox was able to connected to the internet.
- I powered up my laptop and it couldn't connect to the internet.
So, I went through the above steps again and powered up my laptop first and was able to connect to the internet. I then turned on my Kobo and was not able to connect.
It seems as if I can only have one device connected to my wireless network at one time and that device is the first one to be powered on and connected to the internet.
Am I missing some network or airport extreme settings...
thanks

Try the following on your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Click the Internet Connection tab
Change the setting for Connection Sharing to read Share a public IP address
Click Update

Using more than one input device at the same time

Is it possible to use more than one input device at the saem time in logic express. For example I have a fire wire input device and a usb input device can I get Express to recognize both of these at once and so have a total of 4 ins which would be great since Im transfering tracks off my ADAT and it would be less track to have to line up.
Thanks

Hi,
yes, it should be possible by creating an aggregate device. Google for it or search this forum. There are many tutorials how to set it up.
Have fun!
Fox

Can I use more than one bluetooth device at a time with my iphone4

Can I use more than one bluetooth device at a time with my iphone4

Anthony
I have a Plantronics 975 earpiece that works very well with my Razr. I
just got a Panasonic KX-TG7873S phone system for my home, it has a
"Link-to-Cell" cellular convergence solution, from what I understand it is
just Bluetooth enabled. I have paired both device with my Razr. In
settings, Bluetooth setting, both device show. But only one device can
connect at a time. If my Plantronics is connected and I choose the
Panasonic device, the Plantronics device disconnects and the Panasonic
device then says it is connected. Both devices work when they
are connected. Is it because they are both "headsets"?
So, to have to remember to connect to one or the other device, depending on
weather I am coming or going is not practical.
On Sat, Sep 14, 2013 at 1:14 PM, Verizon Wireless Customer Support <

Connecting more than 6 wireless devices to homehub...

how can i connect more than 6 wireless devices to homehub 3? my current cable provider allows me to have 9 wireless devices connected at the same time
is there a way to connect a wireless router to homehub 3 or do i need to invest in a modem router from another make that allows me the extra connectivity?

Hi you can have as many wireless devices as you wish the same applies to wired connection's if you use an Ethernet switch all you need to do is enter the wireless security code into each wireless device
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Anyone able to mount more than 3 firewire devices on their Alum 2.4 imac?

Hi.
I can't power up more than 3 firewire devices or my imac kicks everything off. I have 2 Lacie 1T drives piggybacked on the 800 port and then a powered firewire hub plugged into the 400 port. I can have either another firewire external HD OR an external Cd/Dvd recorder plugged into the hub. If I try both (or any combination of 2 firewire devices) - the imac kicks everything off firewire, both on the 800 port and the 400 port. All my devices have their own external power supply. It also doesn't matter how I chain the drives. I can have 3 on the 800 port but then nothing on the 800 port.
This is a bummer for me. I migrated from a Dual G5 2GB with 4 external HDs and an 2nd external DVD writer attached. My drives are 2 1Ts, a 800 GB and a 400 GB. I do a lot of photography and video editing so I really need the external space. I guess this imac really isn't a "Pro" model but I didn't need any more speed and I wanted to save space and money. And I love the 24" screen. I think Apple should say up-front if there are significant limits to the imac's Firewire capabilities.
Are any of you you able to attach 4 firewire devices at one time? If so, then I guess my machine is defective and I'll start working with Apple on exchanging it. Please let me know.
Thanks

I think you should be able to do much more than 4 - I believe the theoretical maximum is somewhere at 20+ devices (if they are self-powered). I don't have a 24inch but instead a 20 inch but I'm running three HDs and one DVD drive and in fact, all daisy-chained onto one single firewire port on the Mac. Do your external drives have two ports or just one? In the former case, you might want to try skipping the hub and just daisy-chaining them. I've never owned a firewire hub so I don;t know if they can be touchy but you might want to give it a shot.
Andrew

Cant Connect more than 8-9 devices

I have the original "Mushroom" Airport. Why can't I connect more than 8-9 devices at a time? Tech specs says I can connect up to 50. But havent been able to do more than 8-9 depending on connection order.
I'm trying to connect the following
2 Wii's (Though only 1 would be active at any given time)
2 MBP
2 iPads
2-3 iPods
2 iPhones
1 PC Laptop (win7)
1 Wireless Printer (HP)
I'm running all updated softwares, SL and Airport. and including softwares on the connecting devices. Any thoughts, tips...

I have the original "Mushroom" Airport. Why can't I connect more than 8-9 devices at a time? Tech specs says I can connect up to 50. But havent been able to do more than 8-9 depending on connection order.
I'm trying to connect the following
2 Wii's (Though only 1 would be active at any given time)
2 MBP
2 iPads
2-3 iPods
2 iPhones
1 PC Laptop (win7)
1 Wireless Printer (HP)
I'm running all updated softwares, SL and Airport. and including softwares on the connecting devices. Any thoughts, tips...

Create more than 8 loop devices on 2.63.32-300.10.1-el5uek kernel

Hello
I cant create more than 8 loop devices on 2.63.32-300.10.1-el5uek kernel, althought i have specified options loop max_loop=64 to /etc/modprobe.conf
how should i proceed ?
Thanks

It should work if you add max_loop=64 to the kernel boot parameter line or add it to the appropriate kernel in /etc/grub.conf (after rhgb quiet) for a permanent fix

More than 5 iOS devices what to do?

So I am on my 6th iOS device. 1 iPhone 1, 1 iPod 2, 1 iPad, 1 iPod 3 and a new iPhone 4 which i am getting replaced. so thats 6 iOS devices. So how to I remove my old iPhone from my syncing so that my new iPhone can use my already paid for apps.
Basically I am asking how do i sync with more than 5 iOS devices with the same account.

I can unauthorized computers right. This is my 3rd computer. 1 PC and 2 macs?
Yes, it's computers that are authorized. You can have up to 5 authorized computers using the same iTunes account. Regarding devices(ipods, iphones, etc.) there is no limit to the number that can be synced to the same itunes account.

How can i use Itunes to update more than one IPad with more than one owner

How can i use Itunes to update more than one IPad with more than one owner? I own an IPad and my wife owns an IPad. I want to use my system to update both IPads. We have different Apple Accounts and different applications. Is this possible?

Of course, that is too easy. I am such a bonehead.

[Solved!] More than 8 loop devices?

Hello. I just wanted to know how to add more than 8 loop devices.
What I did so far: edit /etc/modules-load.d/loopback-dev.conf
(Contents: loop)
This only adds loop0-loop7. I want to know how I can add up to loop0-loop63 if I can.
Thanks for your help!
Last edited by Bowser5543 (2014-06-29 11:37:36)

How would I do that? (Sorry. I just recently moved to Arch. It is hard but worth it.)

Can you have more than 3 Bluetooth devices active at the same time?

I have trouble getting my Sony DR-BT101 to link when my mouse, trackpad, and keyboard (all wireless) are connected. I need to link by stereo headphones for music analysis and cannot get all to work at the same time. My Sony headset either won't pair or connect or causes alert that interfere with the running of other programs during my work. Even when I answer one of the alerts and turn off the Mouse it refuses to connect and finishes with a Stop Using Headset message. Even if I choose "Ignore" instead of turning off the Mouse or Trackpad, same thing. I once had everything working at the same time, so I can't figure out what is going on but it won't honor more than 3 devices, it seems. And also, when a new email arrives in my mailbox (iMac OS Lion 7.1 Mail), the alerts stop popping up and go through 3 iterations as each new email arrives. Weird. Any response on how to deal with this?

@kalos
Uninstalled everything PA, also uninstalled mangler which was the only thing that depended on PA. It didn't work anyway.
No pulseaudio --kill command so I couldn't run.
Checked systemd journal and there is no mention of PA this time.
Checked top, and grepped ps aux and there is no PA there either.
I also rebooted the machine completely just to make sure. However VLC and HTML5 have the same incompatibilities.
_ vlc Videos/anime/fmab/01.mp4
VLC media player 2.1.5 Rincewind (revision 2.1.4-49-gdab6cb5)
[0x1bc30f8] pulse audio output error: PulseAudio server connection failure: Connection refused
[0x1af4118] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
Fontconfig warning: FcPattern object size does not accept value "0"
[0x7fb604001248] main vout display error: Failed to resize display
But the video and audio did work until I ran some HTML5 video, after which the audio worked, and then I opened it again and it didn't work...
@nomorewindows
I see. That's too bad. At least we're not alone.
Last edited by Greduan (2014-11-14 01:34:29)

More than one SDK ? More than one APP runing in each SDK at the same time ?

Hi all! after some search at forums I'm quite sure that I can have more than one SDK installed at the same time.
But what i Want to do is having more than one Tomcats running in those SDK
Of course, the principal matter is about ports, but I wanna know how Can i get them running... Will i call each JVM especify?
Will they use patyh ??
Any tomcat+jdk user can trow me some advice ?
thanks!

Subemontes wrote:
Hi all! after some search at forums I'm quite sure that I can have more than one SDK installed at the same time.Correct
But what i Want to do is having more than one Tomcats running in those SDK Ok.
Of course, the principal matter is about ports, but I wanna know how Can i get them running... Will i call each JVM especify?Each will run in a separate VM, and they don't need to be of the same version.
>
Will they use patyh ??What?

Can I have more than one ipod with more than music library on one computer

I was just wondering if i could have 2 different ipods (one a 5th generation and the other ipod touch) with 2 different music libraries on the same computer and itunes? because right now im using my parents computer and my fiance is using my laptop and we're moving so we'll only have one computer in the next few weeks. So if anyone could try to give me an answer or have a solution that would be fantastic lol!

See these articles about using more than one iPod on one computer, and with either one or more iTunes libraries.
Multiple iPod installations.
How to use multiple iPods with one computer.
If you have the latest iTunes, an easy way to create a new library is to hold down the 'alt' key whilst opening iTunes (for Macs), or hold down the 'shift' key (for Windows).
This will give you the option of either using the current iTunes library or creating a new one.
There are various methods of transferring different songs to different iPods with a single iTunes library.
One is to manage the songs manually.
With this setting, you can drag and drop songs/playlists etc onto the iPod from iTunes, and also delete and/or edit songs which are currently on the iPod without affecting the iTunes library.
If you wish to keep the convenience of automatic sync, then you could set the iPods to sync with "selected playlists". This setting can be found in the iPod summary screen under the 'music' tab. With this setting, different playlists can be transferred and later deleted from each iPod without affecting any playlists stored in iTunes or the playlists on the other iPods.
Also, on the 'summary' main page you will see the option to "only sync checked items". With this setting selected, if you remove the check marks from any songs in iTunes, they will not be transferred to the iPod. You can restore the check mark if you want to put the songs back on the iPod at a later date.
Be aware that when playing songs in iTunes, any songs that do not have a check mark against them will be skipped over and will not be played.

How do i stream to more than one airplay device on an ipad

I have an Apple TV connected to a TV/hifi set up and I want to stream music/internet radio to other rooms simultaneously (more than 2). I have read that the only way is to do it from itunes on my PC, but I want to do it from an ipad or iphone. I've read various threads that suggest you can do it, but before I spend good money on an airplay sound doc for the kitchen and bedroom, has anyone done this succesfully without quick fixes that invovle a PC and third party software? My other option is a Sonos setup but as I already have the Apple TV, I don't want to re-invent the wheel?

Where are the folders on your computer that you are trying to sync ? If they are directly underneath the folder that you have selected at the top of the Photos tab then the 'selected folders' option should not be greyed out - is that where the photos that you are trying to sync located on your computer ?

The solution to sell more than 1 milion BB devices more in 2012

Similar Messages

Maybe you are looking for