The sound has stopped working on my iPhone since I downloaded iOS 6
Am I missing some thing or did I not finish it properly. Since the new software has been installed there is no sound !!!! Help
basics from the manual are restart, reset, restore from backup, restore as new.
Similar Messages
-
My earpiece speaker has stopped working on my iphone since updating to ios 6.1.3
I have recently updated my iphone software to IOS 6.1.3 and now when I make a call the other person can only hear me when on loudspeaker or on Hands free in my vehicle. When the phone uses the earpiece speaker all the other person can hear is a loud whistling noise, has anybody else had this problem ? If so is there a remedy?
Hi rickwebby,
If you are having audio issues with your iPhone after updating to iOS 6.1.3, you may want to update to the recently released iOS 6.1.4 and see if the issue persists:
Apple Support: iOS 6.1.4 Software Update
http://support.apple.com/kb/DL1652
Cheers,
- Brenden -
my sound has stopped working on my iphone 4s I did a complete restore and still no luck, any suggestions?
If the silent switch is off, no change after inserting and removing the earbuds or headset cable a number of times, and the same after restoring your iPhone as a new iPhone or not from the backup, your iPhone has a hardware problem.
The iPhone includes a one year warranty. -
My Facebook app has stopped working on my iPhone how do I fix it?
How do I fix a Facebook app that has stopped working on my iPhone?
Start her:
iOS: Not responding or does not turn on -
my iphone 4 the vibrate has stopped working and the txt tone wont work even tho it says its got a tune and when i go to turn it up on side buttons it say (headfones) but they arent plugged in, but the sound works when someone rings me???
ATtempt to power off your device and power it back on, if that doesn't work reset all settings should resolve it for you
-
After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working, After upgrading my iphone 4s software to 6.1.2, the sounds have stopped working? Can it be recovered or a Hardware has to be replaced. I tried restoring my phone, but it did not work. Any solutions?
alisportshots wrote:
I have a similar problem, but after following your suggestion of deleting my iphone backup and then turning backup back on again, I needed to plug my phone into my computer to sync the backup. I re-tried to do an icloud backup and it again told me that "the last backup could not be completed"... since I had deleted the backup, it says the "Last backup: never". Ugh. I reconnected my iPhone 4S to my computer and iTunes so I could sync my phone and do a backup... it's still "waiting for sync to start"...
For your iCloud backup, you may have an app that is preventing the backup from succeeding. To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again. If it succeeds, then the camera roll and/or one of your apps is preventing the backup and you'll have to located by process of elimination. Turn the camera roll On and try backing up again. If it succeeds, turn some of your apps to On and try backing up again. If it succeeds again, turn some more apps to On then try again; repeat this process until it fails. Eventually you'll be able to locate the problem app and exclude it from your backup.
If you turned iCloud backup off and try to sync to create a backup on your computer and got a "waiting for sync to start" error, it may be caused by a corrupt backup on your computer. You could try deleting your last backup by opeing iTunes and going to Preferences>Devices, clicking on your last backup and clicking Delete Backup. Then try again. -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
Hi, I have an iphone 5 and unfortunately got sat on and is now bent, it worked fine bent for 3 months as the glass did not break, today how ever the screen has stopped working. Is it possible to get hold of another casing and have the electronics changed ?
You didn't look hard enough:
Out-of-Warranty Service
If you own an iPhone that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will service your iPhone for the Out-of-Warranty Service fee listed below.
iPhone model
Out-of-Warranty Service
iPhone 5s, iPhone 5c,
iPhone 5
$269
iPhone 4S
$199
iPhone 4, iPhone 3GS,
iPhone 3G, Original iPhone
$149 -
I have only had my iphone 5s for two months and the charger has stopped working. Is there anyway that I can recieve another.
take it to an Apple store genius bar ,it has 12 months warranty and they will check it out
-
Using iMovie and the voice over sound has stopped working?
Using iMovie and the voice over sound has stopped working?
Are these the internal speakers?
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964 -
he centre Home key button has stopped working on my iphone 4. Also it keeps on hanging. need help!!
Settings > General > Accessibility > AssistiveTouch > Toggle ON
This can serve as you on/off sleep button until you can have it repaired. -
The sound is not working on my iphone
the sound is not working on my iphone it has suddenly stopped can someone please help me?
None of these methods worked, so I just took a very thin paintbrush and dampened it using a Clorox wipe. Then, I just wiggled it around in the charging port. The sound worked for like 3 seconds then it stopped again. So I continued to clean it and it worked! After I listened to my music for about 30 minutes until it stopped again. I just blew hard into the port and it started working again. I think the problem was that the phone thought it was docked into speakers because it was so dirty. I think I'm going to get an Otterbox so this doesn't happen again. I hope I helped.
-
Satellite C650 sound has stopped working
I've had my laptop for about 6months and have had no problems with the sound until now.
I have recently done a windows update and a few hours after my sound has stopped working completely.
I have updated the driver (Conexant Cx20671 smart audio hd) after that failed i un-installed and reinstalled the driver off the toshiba downloads, after restarting again no sound.
When i have media player on, the sound mixer recognizes there is something playing but there is no sound coming out the speakers
_*please can someone help!!!*_Ok, this means that the sound driver is OK.
Please go to the control panel -> sound -> Playback tab
Here you have to check if the speakers are set as default device.
Furthermore mark the speakers and click on settings button.
There you can also check the volume level. -
I have downloaded ios 5.1.1 and the wifi has stop working or it would stay on for less then 20min its only 9 months old can someone explain what is happening and if some know how to fix it
I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.
-
My sound has stopped working only on games
Works fine for Internet and music
How do I fix this?If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085
Maybe you are looking for
-
How do I watch my iTunes movies, tv shows on my mac without having to download them all to my HD? I really want my Mac to function like my Apple TV since I have just moved and don't have my TV for another few weeks. Since I purchased my three Apple
-
Installing clean Win 8.1 on X1- is it safe to delete all partitions first?
I have created a Windows 8.1 installation USB drive using the Microsoft tool and am going to install it on my X1 (gen 2), but wanted to check if it's safe to delete all 6 partitions on the drive using the installation and let the Windows installer re
-
User Exit to Create Production Order when creating of Purchase Order
Hi Guru's, I want to create the Production Order when creating the Purchase Order. i want to know is there any user exit exists for that?? My scenario is as follows. we are converting the Purchase Requisition to the Purchase Order , while doing this
-
Internal table - select if in range ?
Hello ABAP Experts, I have a internal i_gl_account table which has some of the following fields: glacctfrom, glacctto, flag i have to select a record from this internal table based on a fixed gl_account_fix. i cannot write this statement read table i
-
how can i transfer my calendar from iphone to macbook? Sync is not working!, how can i transfer my calendar from iphone to macbook? Sync is not working!