The sound in the middle of the clip was missing.

Dear Adobe Premiere Pro friends,
Can anyone help me, recently I have the problem when I have succeed imported the clip, some of the clips was missing the sound at the middle up to the end of the clip.
The clip was imported are MTS taken from my Panasonic Camcoder HVC 550.
Awaiting the advice.
Tks & B/regards,
Handjojo

Assuming you're running iPhoto 9 or later do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.

Similar Messages

When plugging in my headset, the sound continues to play on the ipad and not on the heeadset. Why?

When plugging in my headset in my iPad, the sound continues to play on the ipad and does not switch to the heeadset. Why? I did not have this problem before.

If you have used earphones in the past then I assume that you realize it takes a very firm push to insert the headphones into the opening - correct?

HT2499 I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???

I bought my MacBook Pro in Aug 2011 - this is the first time I'm trying to watch a DVD on it - I hear the sound but can't see the video - how do I fix this???

what application are you using to watch the DVD?
is it a burned dvd?

HT2693 The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. Please

The sound will no longer come through my headphones on my iPad I've tried several different headsets. The sound works as normal without the headphones but will still not come through the headphones even thoug I have tried to reset it twice. This is the new ipad with retina display and is only 2 months old and otherwise works fine. Please help!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPad. Nothing will be lost
Reset iPad: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPad for a refurbished one for this price. They do not fix yours.
iPad Service Answer Center
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPad Repair - iFixit

I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen

I have a iPad and I connect it to my tv through hdmi but would like the sound to come out through the headphone socket, can I make this happen.

Go to System Preferences>Sound>Output and make sure that you selected the right output. I think if yo use HDMI you might not be abe to select another output.

The sound effects volume is all the way down. It pops on for a second, then disappears. I can't find it in settings. How do I get the sound back?

The sound effects volume is all the way down. It pops up for a second once in awhile and then disappears. I can't find it in the Setting. Music sound plays fine, but no sound on my apps. Any idea how to fix it?

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

All of a sudden, I can't watch any of my films from the Event Library, it also says 'Source Clip is missing' in the other window, I haven't even touched anything that I know of?

Hi
I haven't even touched anything that I know of?
And You've not moved or emptied any folder on Your Hard Disk named
• iMovie Event's - or -
• iMovie Project's
Or - disconnected any external hard disk/s
As one CAN NOT move the Event's or Project's on / via DeskTop/Finder - AS iMovie then loses the connection to them. Moving them - MUST BE DONE - within iMovie application - to work OK.
So if You by meaning or accident moved it/them - Move them back - and iMovie might work again.
ELSE - If You are 100% sure that You didn't move them then
• Trash iMovie Pref and Cache files
• Run Repair Permissions - Disk Util tool
• Run Repair Hard Disk - Disk Util tool - BUT YOU MUST Start-Up Your Mac from DVD or External HD to do this
and may be all will work OK again
Yours Bengt W

Having a MBPr late 2013 and having a sound problem the sound does not come tom the headphones even its all the way up and when i remove the headphones it docent come out the internal speaker either ? any idea how i fix this?

the sound do not come out the headphones sometimes altho its all the way up in the setting and when i remove the headphones the sound doesnt come from the internal speaker either and only a reboot fixes the problem and thats annoying! any idea how tto fix this?

Hello. I've been able to play sound without problems through headphones or external speakers to date - the output always switched to these automatically until today. Now, sound output continues through internal speakers even if I plug in headphones or external speakers.
- I tested the headphones and speakers on other devices: they work fine.
- When I plug in headphones or speakers into the audio output port (I have verified that I'm not using the input jack) the devices are not detected and are not listed under the output tab in system preferences-sound.
I concluded from this that I probably had a problem with the audio port, so to test that I tried the following. I plugged a powered multi-USB device with ports for microphone line-in and headphone line-out into the USB port and switched it on. I verified that it was working by plugging a USB stick into the multi-USB device - this was recognised successfully, so the device was clearly working. I then plugged in headphones and speakers into the audio line-out on the multi USB device - but still no sound came through them (and tey were not listed among output devices) and the Mac continued using internal speakers.
What should I do? Does the latter test suggest that the problem does not lie with the audio port, or is my test not conclusive? What would you advise?
Many thanks indeed!
NG

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

I've noticed that when wearing headphones the sound is much louder in the right headphone than the left one. This wasn't a problem before. Has anyone else noticed this? Is there a fix if so?

Did you try different headphones!?
If it's sounding the same thing on different headphones then you might have changed the Left-Right balance
Have a look at Settings -> General -> Accessibility
There's a slider for L-R
If it's in the center then the headphone through which you're facing the problem might be damaged, try twisting the headphone wire of the speaker of the headphone (left or right) where you are encountering less volume.
If it's sounding altogether same on all the circumstances, the headphone jack might be damaged. Get your phone to the Apple Store and book an appointment
Try these steps and it will solve your question

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.

Why such sorry sound quality on iTunes? On some of my purchases the sound level is suppressed on the audio. On others the volume is so low that if I have it set for another song and a new one starts I have to increase the volume to hear it.
There is so much distortion on some of the music I have to play it with QuickTime to get a "clean" track.
What can be done to get a consistent volume level or is this another typical Apple product that you have to take what you get and be happy because it's not a Microsoft product?

If that's the best you can do why don't you get on another forum?

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes W7/64 or a known hardware issue?

I use itunes on a Dell XPS502 with W7/64. In some cases have have problems to import CD's. The sound is very disturbed and the import need a lot more time than in normal cases. Is there a problem between itunes and W7/64 or a known hardware issue?
Example-CD : "Tracy Chapman , Telling stories" is not able to import . I have more such negative cases. But in other cases it works fine and the sound is great.
The firmware at the inbuild CD/DVD DS-6E2SH is the latest version.
What can I do??

hi b noir,
I don't no about virtuel drives like you mententioned. In the mean time I have rebooted the XPS and run again the iTunes diagnostics. I think the back - chance in the registry was not ready to use. Now there are another results. They are the same in case of a running CD or a not running CD. The difference in total is like before. It takes more time that iTunes reads the (bad) CD and at the there is no good sound. In both cases ( running or not running CD) iTunes diagnostics gives as a result :
(the copie from ITunes shows the result of the not running CD from Tracy Chapman)
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Dell Inc. Dell System XPS L502X
iTunes 10.3.1.55
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.2
iPod Updater-Bibliothek 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Treiber 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes-Seriennummer 00D7B2B00CD25750
Aktueller Benutzer ist kein Administrator.
Aktuelles Datum und Uhrzeit sind 2011-06-11 19:33:22.
iTunes befindet sich nicht im abgesicherten Modus.
WebKit Accelerated Compositing ist aktiviert.
HDCP wird unterstützt.
Core Media wird unterstützt.
Info zu Video-Anzeige
NVIDIA, NVIDIA GeForce GT 540M
Intel Corporation, Intel(R) HD Graphics Family
**** Info für externe Plug-Ins ****
Keine externen Plug-Ins installiert.
iPodService 10.3.1.55 (x64) arbeitet zurzeit.
iTunesHelper 10.3.1.55 arbeitet zurzeit.
Apple Mobile Device service 3.3.0.0 arbeitet zurzeit.
**** CD/DVD-Laufwerkstests****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: PLDS DVDRWBD DS-6E2SH, Rev CD11
Audio-CD im Laufwerk
11 Titel auf der CD gefunden, Spieldauer: 42:07 auf Audio-CD
Titel 1, Startzeit: 00:02:00
Titel 2, Startzeit: 03:59:47
Titel 3, Startzeit: 07:19:27
Titel 4, Startzeit: 11:31:30
Titel 5, Startzeit: 15:31:50
Titel 6, Startzeit: 20:07:50
Titel 7, Startzeit: 24:27:15
Titel 8, Startzeit: 27:49:10
Titel 9, Startzeit: 32:41:25
Titel 10, Startzeit: 35:29:65
Titel 11, Startzeit: 38:38:00
Audio-CD erfolgreich gelesen (Suche nach alter Firmware).
Laufwerksgeschwindigkeit erfolgreich erkannt
Die CDR-Geschwindigkeiten des Laufwerks sind: 4 10 16 24
Die CDRW-Geschwindigkeiten des Laufwerks sind: 4
Die DVDR-Geschwindigkeiten des Laufwerks sind: 4
Die DVDRW-Geschwindigkeiten des Laufwerks sind: 4
After starting the import it is going slower and slower. If it is helpful I can send you a soundfile with these distortions.
best regards
tcgerd

I'm having trouble with the volume of my i phone 4s when using headphones, the sound will only appear when the volume is at its highest, any lower and all I hear is static. Can anyone help me with this problem? Much appreciated.

Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Can we stop the process chain in middle of the process ?

hi experts,
Can we stop the process chain in middle of the process after scheduled.
my process chain is like start--->load>psa>ods1-->further updates--->ods2. In this case I have already scheduled but i want to stop the process how can i. After rectifying the error I want to restart again.
if it is possible what are the steps we fallow pl give me step by step procedure.
thanks & regards.
venkat

stopping the process chain is pretty simple. you just need to kill the jobs associated to them as mentioned by other folks.
for restarting, have a look at this blog.
Restarting Processchains
there he explains how to restart a stopped process chain.
Raghav

In find my iPhone can I shut the sound if I accidentally press the sound button?

Can I shut the sound if I accidentally pressed the button in find my iPhone?

The sound stops after a minute or two. To get it to stop before then, you would need to unlock your iPhone.

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

I am trying to use a Logitech USB headset to record with screencast o matic. In the sound file of system preferences the headset is recording audio. However it stops working when I use screen cast o matic. Any advice?

See these threads for some possible solutions:
Bluetooth and 10.7
Bluetooth speaker error

The sound in the middle of the clip was missing.

Similar Messages

Maybe you are looking for