The sound is too low on my persario cq61-400 series

hd sound does not work rite

Hi,
One thing that can sometimes help is the following. Right click the speaker icon in the Taskbar and select 'Playback Devices'. Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

I've an iphone 4, its headset jack is not working properly, when i insert the earphone no sound is coming, but when i keep the earphone little out i can hear the sound but very low sound is coming out, I've never dropped my iphone please help...

bunjamin wrote:
There is now a new line in BBM that wasn't there before which covers the message that I am typing, so I can't actually see what I am typing.
Hi bunjamin,
just go to BlackBerry World, and update all your apps including BBM.
bunjamin wrote:
Every time I unlock my phone, my screen enlarges so I can't really see much on the hub/notification screen and it defaults to the hub which it didn't do before).
you can turn off the magnifying glass :
device settings >> accessibility >> magnify mode >> OFF
you can deactivate the "reset to Hub view" :
hub >> overflow (bottom right button) >> Settings >> Display and actions >> Return to Default View When Idle >> OFF
bunjamin wrote:
my ringtone is much softer than it was previously
yes, BlackBerry has acknowledged this bug in this article from the public knowledge base:
KB36755 After upgrading BlackBerry 10 OS to version 10.3.1 the volume for notifications is noticed to be significantly lower than in the previous version
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Radio(FM) sound is too low comapred to music playe...

hi
have anybody has ame problem..
"Radio(FM) sound is too low comapred to music played on phone"
the phone has strong speakers which which are loud enough but when you play Radio(FM) the volume is too low.
any suggestions on this

I`m totally agree with you kklot, volume level of 5530 xpressMUSIC (?) is a shame ... despite the terrible quality earphones provided with this model.
I feel cheated by nokia, i bought an XPRESS MUSIC because of my great love for music ... but i cant access my music from earphones, cant rewind or change a song .. (!)
I really hope Nokia release a firmware improving
* a higher volume level ......... ----> URGENT ....!!!
* bugs related to listening music meanwhile you try to do basics like answering a call !!
why the phone has to freeze or restart??
I had always used Samsung, ok, no symbian but great, powerful and rich sound..
i`m regreting right now about this nokia cell ....
...by the way, i cant access youyube, maybe someone can help me? is it possible? i didnt find any app for 5530.

How to block an order if the price is too low?

Hello,
My problem is :
How to block an order if the price is too low?
I created a new type of condition ZMIN and an access by material.
When the net price is below the minimum price the system must position the order on incomplete document for error of price.
Thank you in advance.
Frédéric Blaise
e-Kenz S.A.

Hello,
you can enter a lower limit in the condition record:
Lower limit of the condition rate/amount
Indicates whether, during document processing, the system checks if manual changes fall short of the lower limit allowed for the corresponding condition record.
Use
When you maintain the scales in a condition record, the system checks whether the scale value falls below the lower limit.
Or you can use the flag 'conditon update'.
Condition update
Controls whether limit values are relevant for pricing.
E.g.: you can make the use of a particular condition record in the document dependent on a specified total value.
This total value can be specified in the condition record.
I hope that the information are helpful.
With best regards
Claudia Neudeck

Hi! I have an iPhone 4s and when I FaceTime the sound is really low. When I phone call someone, its totally different and works better. I also have a MacBok Pro and the FaceTime sound works perfectly there as well. Can someone pls help me? Thanks :)

Hi! I have an iPhone 4s and when I FaceTime the sound is really low. It´s really annoying. When I do phone calls it works, and on my MacBook Pro it works much better on FaceTime than on my phone. Can someone pls help to so solute this? Really need help! Thanks

This sounds like something similar to https://discussions.apple.com/thread/3388112?start=105&tstart=0.
Try turning down the speak volume (System Preferences->Sound->Output->Output Volume) or the microphone gain (System Preferences->Sound->Input->Input Volume). Do this on both sides of the call.

Sometimes sound is too low

I watch on line movies and sometimes sound is too low & I can't get it higher using build in tools. Is there any tricky way to manage sound? I use built in sound speakers on iMac. Os x 10.6.7

no ideas? Please, there must be a way to strengthen a sound level if a source too low....

Help! Sometime, the voice is too low for the receiver

Hi, I've found the voice issue of my iPhone: Sometimes, I use my iPhone talking with others, the receivers complains the voice is too low(Especially, serious when it's low battery). I've restarted my iPhone but it doesn't work. It's back to normal after it's fully charged. Do you why? and how to fix it? Thx.
Frankie

The volume via the built-in phone/earphone is no problem. The issue may be the built-in mic, it seems to be too leak for receive the voice, so the others(the receiver) can't hear clearly.
Frankie

When I send project to iTunes the volume is too low. I have auto normalize checked.

When I save project to itunes the volume is too low on the entire project. I have auto normalize checked. I have been sure to reduce the volumes below the red clipping dots. This includes the master volume. It is fine in GB, but in itunes I need to increase the volume slider to max to bring it up to what I was hearing in GB. Is sthere something else I should do to reproduce more volume when I share a project to itunes? Thank you.

DId you try a comparioson when exporting the same song with and without "Auto Normaize".
Technically there is the possibility that "Auto Normilize" will reduce the overall level of your final mix. If there is a short spike above 0dB that you don't hear as an audible pop and GarageBand brings down the overall level to that that spike to 0dBFS, and by doing so, lowering that level of your mix by that amount.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

IdeaCentre B520 - sound recording too low, sound on Skype too low

Hi
When I speak on Skype or use Sound Recorder to record my voice (using internal microphone), the sound is very low.
I think I have turned up every possible Microphone and Audio setting on the system to its highest.
My IdeaCentre B520 is very new and I haven't installed anything else on it other than Skype.
OS is Windows 7 x64.
I used the Lenovo automatic check for drivers and it said all drivers up to date.
I haven't had a system with an internal microphone before, I literally just talk (loudly) at the monitor, I presume there isn't anything else I need to do?!
Thanks for any help you can give with this frustrating problem!
Patricia

Hello Patricia,
This is not good to know that you are encountering the issue with your new desktop.
Please make sure that the Audio driver version is 6.0.1.6294, if it is not then you may download it from the mentioned below web link.
http://consumersupport.lenovo.com/ie/en/DriversDownloads/drivers_show_4706.html
If the version of the driver is same then you can try the settings.
1. Right-click the icon of the speakers icon at the notification area, and then click “Sounds
2. Click the tab “Recording”, and then click “Microphone” à select “Properties”.
3. Select the tab “Listen”, and then check “Listen to this device”. Apply it, and the function will be enabled.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

My flash player didnot support such video and the version is too low

I have checked in your internet, it told me Flash Player is pre-installed with Internet Explorer in Windows 8. and Either Flash Player is disabled or ActiveX Filter is ON. But i really find Flash Player is enabled or ActiveX Filter is Off. For flash play, it can play most of flash video, however, it shows my flash player didnot support such video and the version is too low. In fact, the my downloaded version is the laterest. how can i fix the problem? thanks.

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
Try to "disable the hardware acceleration" in the Flash Player.
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
See also:
*https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
Flash "Display settings" window:
*http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Hi, i have an 6 gene ipod nano and having some trouble: suddenly the level of the sound starts getting lower and lower without my command...thanks.

hi, i have an 6 gene ipod nano and having some trouble: suddenly the level of the sound starts getting lower and lower without my command...thanks.

hi, i have an 6 gene ipod nano and having some trouble: suddenly the level of the sound starts getting lower and lower without my command...thanks.

The sound volume in the videoproject is too low

Hallo,
In Adobe Premiere Elements I3 made several projects. I used the tool Normalisation for the audio in a clip. Untill now this was functioning well. But at the present time I have a problem. Likely I have made a mistake with one of the settings. But I don't know which mistake.
After the Normalisation of the sound in the clip the graphic rendition in the picture in the track Comment is as it should be.
But the real sound is now too low. In the sound mixer I can see that the level of the sound doesn't come higher than -12 where it should actually be 0.
I must have changed an overall setting somewhere with the result that the sound actually is too low.
My question is: how can I restore the old situation where the sound volume was correct?
Thank you in advance.
Greetings,
Hans van den Heuvel
email: [email protected]

Hans van den Heuvel
My first impression of what you describe is this...
1. If you were making audio adjustments with Clip Gain dialog, what happens if you bring up
the Clip Gain dialog and change the value there from -12 to 0.0 dB for the audio clips whose values
have gone from 0 to -12?
More later.
ATR

Sound Recorded Too Low

Hoping someone can help!
On my recent shoot, the recording volume settings were too low (I think) and after capturing to FCP the average reading is around -50 and peaking at -12.
Even upping the sound bar by the max 12dB isn't enough really to repair it. I'm a pretty basic user of FCP so don't know a lot of the technical stuff. I have Soundtrack Pro and don't know if that can help me as I don't know how to use it.
Any help would be hugely appreciated folks as stand to lose an awful lot of material..
Thanks!

The quick solution is to double your audio tracks
The quickest way to do that is to hold down the Option key while dragging the audio clip to a new track ... before releasing the clip, press the Shift key (while still holding down the Option key). This will create a duplicate clip in perfect sync with the original clip.
You can also use the Dynamic Processor filter to add more gain.
-DH

Sound system too low!

After upgrading to Mavericks, all sound system are too low. I can't hear a thing if my volume is at 4 or 5 block, especially on Messages.
On Mountain Lion I don't had this problem. There is any way to fix that?

Since your PowerBook has a Line-In I'd suggest a better solution than an iMic would be a small mixer like the Behringer UB502 Eurorack Mixer for about $30. It will give you a lot more control over the levels.
--HangTime [Will Compute for Food] B-|>
Note: I am an Amazon Associate, if you purchase this item via my link I will get a small commission)

Sound is too low

The sound on my mac is too low. I have the settings as high as they will go. Any suggestions?

Hi,
One thing can help is the following. Right click the speaker icon in the Taskbar and select 'Playback Devices'. Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

The sound is too low on my persario cq61-400 series

Similar Messages

Maybe you are looking for