The sound of my computer don't work, help me.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

Similar Messages

The only time the sound/speaker and mic don't work is when I answer or make a call

The only time the sound/speaker and mic don't work is when I answer or make a call. They both work fine for everything else. This has been going on for over a month. AT&T said it's Apple and Apple said it's AT&T. I've been around that cycle twice.
When I dial a call, I can see the status words on the screen but can't hear the ringing. If the person I'm calling answers, my screen will show the call was connected and the call timer will begin but I can't hear anything and they can't hear me. If one of us doesn't end the call, the timer keeps going and I'm being 'charged' for dead air. (Of course, one of us disconnects so mins/cost isn't an issue, I'm just adding the info in case it helps solve the problem.) If they don't answer, the call will go to their greeting but I can't hear it and wouldn't be able to leave a message anyway because my voice isn't going through. However, they will get a voice mail alert and see that I called but no message was recorded.
If some one tries to call me they will hear ringing but when I answer, they can't hear me and I can't hear them. If I don't answer, they will hear my greeting and can leave a message. I can retrieve and hear my voice mail. Trying speaker phone and headsets didn't change anything for calls out nor for calls in.
I have 4.3.3 and have synched, reset, rebooted, turned things on and off and off and on and took the SIM card out of the phone and out of it's tray and put it back in. I've done all that several times in just about every combination and order possible.
Hopefully the following will provide good clues: On only about three of the many attempts I've made to get it to work correctly that included taking out the SIM card, I could make and/or get one or two calls with no trouble but then the problem comes back. Also, when I swapped the SIM card with another iPhone4 on my plan, the other phone would work with my SIM card but my phone still would not work with the other SIM card. The last fact makes me think it is an Apple issue. I'll go to an Apple store (genius) this weekend. Will I be wasting my time and gas? Anybody have any experience with this problem?

Let me try and address some of your questions. I'm only on a pc, so a few of these answers might be slightly different on a Mac, but not too different (such as control click rather than right click).
First, when you buy something on your phone, be it apps or music, it's transferred from your phone to your Mac when you sync your phone. So those apps should now be in you iTunes library. ( IF for some reason you can't find them there, you should be able to download them again, either onto your phone or through iTunes. On your phone, go to the App Store > Updates and you'll see a "Purchased" link at the top of the page, you can view all purchased apps here and redownload them. In iTunes, you can go to Store > Check for available downloads. )
Whenever you plug your phone in, it should create a backup of everything you have on the phone. This is how, provided restoring your phone as a new device doesn't fix the issue (more on this later), you can put all of your music and apps onto the new phone. You can always plug your phone into your Mac and the first thing it should do when it syncs is create a backup. If you want to be sure, you can right click on your device in iTunes (on a pc) or I assume control click on a Mac and select "backup".
The genius will take care of the sim card and setting up your phone, however you will have to put all of your music and apps on it, unless you ask the genius, I've never bothered since I know how to do this.
You should have no problems restoring from a backup if they give you a new phone. However, it's probably safest to try and create a backup of your last phone backup before you restore it as a new device. I suggest you refer to http://support.apple.com/kb/ht1414 for more information about that.
I've had no problems with my new phone so far.
I'll try to keep checking this thread if you have any other questions or need more clarification.
Edit: I should say we never did figure out what exactly was wrong with my phone. The only thing I can think of was that it got a lot hotter than the phone it replaced, and also the phone I just got yesterday to replace the malfunctioning one. But otherwise they saw no problems with the hardware, but acknowledged it must have been the hardware since we tried everything else. Also I would go with a list of all the things you tried with this phone, for your own reference and the genius's, especially if you're not confident in your tech skills Showing the genius that you've tried: different sim cards, updating the software, restoring it from a backup, and now restoring it as a new device, should convince them that you've done everything you could, and the only other answer is hardware problem.
Also if you don't already have one, make a genius appointment ASAP. Most stores are very busy and their appointments fill up fast. I always suggest making an appointment as early as possible, hopefully before the retail store hours when they've only got techs there because they usually are less stressed and have a bit more time to spend with you. The easiest way to make an appointment is to download the Apple Store app. It detects the closest Apple store from you and makes it quite easy to schedule a genius.
Message was edited by: deddinty

I remove by mistake the realtek audio device high definition audio bus. Now, the sound of my computer is not working. What should I do?

Hi!
I remove by mistake the realtek audio device high definition audio bus. Now, the sound of my computer is not working. What should I do?

first go to start-all programs- windows update is at the top of the list follow the prmpts to install microsoft update which is the new version of windows update if microsoft update is all ready installed go there and select custom then let it look for updates
then if it detects missing drivers it will install or guide you on what to do. If you have an r52 laptop then try this link.
http://support.lenovo.com/en_CA/downloads/detail.page?LegacyDocID=MIGR-58599 the best of luck.
2 if that doesnt work then try this open device manager right click on the sound device you may have to expand sound, video and game controlers on the tab that comes up select properties then select the drivers tab select update driver.
do it this way incase the driver installation failed the frist time it may not ask you to update again if you didnt uncheck the box that came up on frist try.
3.find a mother board disk and search the disk using explore for ac97 realtech driver. actually windows update should solve it also try there FIX IT web site there are many automatied fixes there for your use.

The sound on my laptop has stopped working entirely, with and without headphones. What should I do?

The sound on my computer has stopped working. I have searched through countles google entries to try and figure out the problem but I can't find anything remotely useful. I never spilled any liquid or anything on my computer. I was just searching through youtube and when I clicked a video there was no sound. Then I checked iTunes and tried to play some music, still no sound. I played around with the preferences and volume control, still no sound. If you have any advice please help. Going to the apple store is so expensive and I don't have the time or money.

Did you try resetting PRAM and SMC?
Is there any red light visible in the headphone port?

Have lost the sound on my ipad:( but it works with the earphones.i have done the mute button and restart stuff ,still no luck .help please

Have lost the sound on my ipad:( but it works with the earphones.i have done the mute button and restart stuff ,still no luck .help please

Hi, sill no joy with my sound on my iPad .the sound only works on one app ( Annie ) and the ring volume and it works for about 5 seconds after I switch it on . Was talking to apple and they said the reset my iPad and this will fix it .done this and it is still not working only with earphone and Annie. What next ?As they said this is unheard of as it was the upgrade to iso6 that caused this problem . Help

My audio disappeard when Im working in a project but the sound in my computer works. How can that be?

My audio in Logic Pro disappeard when Im working in a project but the sound in my computer works. How can that be?

Logic Pro>Preferences>Audio>Devices>Coreaudio
That can be because Logic can have its' audio hardware configured, different from System Preferences>Sound, which is the config all other apps use. You've probably assigned Logic to some inactive audio port.

The sound on my computer freezes/skips

The sound on my computer freezes/skips when I watch/listen to anything. I have an HP Pavilion g7 Notebook with 4g and AMD Athlon II P360 Dual-Core Processor. The bios is F.04 - from 3/29/11. Any help would be greatly appreciate.
HP Techs were not knowledgeable whatsoever. They had my put the computer back to factory settings (didn't work), check the bios (didn't work), check the hard-drive (both short and long test) (didn't work). I hesitate to call them again because all 3 of them have been unhelpful throughout the process.
I've read that people have had this problem consistently with HP, even getting new HP's from the company and they still have the same problem.
Thanks!

@paulfulks
Try the following steps in sequence.
Perform a hard reset on the notebook. In order to do that, disconnect ac adapter,battery and any adittional devices or peripherals connected to the notebook. Press and hold down power button for 5-10secs.
Power on the notebook and Uninstall Audio drivers of your notebook from Control Panel and restart the computer. After the restart is done, install the updated sound drivers by downloading it from here
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

My iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

my iPod touch needs to be restored. however, all of my movies/apps/songs/photos are not backed up on my computer because the shop on my computer does not work. can i still get the memory on my iPod touch 32gb back?

If you weren't able to sync the purchases to a computer previously and now your iPod needs to be restored so you can't sync it now, then you may be out of luck and will need to purchase your content again. Officially Apple does not allow redownloads of purchased items other than iPhone/iPod touch applications and iBooks. The official statement of their policy can be found here, among other places.
You can try contacting iTunes Store Customer Service (select the "Music Purchases" or "Video Purchases" category, as appropriate, then "Lost or Missing Items". You'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) ") and explaining what happened. Reportedly in some cases Apple has allowed redownloading on a one-time basis. But don't count on it.
Good luck.

The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

The sound in my IPad is not working after I downloaded the new iOS 7. I tried to reset the IPad to no avail. Could anyone be so kind to help me?

I"m going to make the presumption that you've checked the volume and that you don't have it muted. One thing some have suggested is to go into the settings and reset all settings.
It is kind of a drag because you wil have to retweak everything but it's helped for some.

I downloaded the latest itunes update and it will not play my music and the sound on my computer has been disabled.

I downloaded the latest itunes update on my HP desktop with Windows Vista and it will not play my music and has disabled the sound on my computer?

Good Morning jsacc38,
The resource below will help you with the issues you are having with the iTunes for Windows update on your PC:
If you can't install or update iTunes for Windows - Apple Support
http://support.apple.com/en-gb/HT201668
Learn what to do if you can’t install or update iTunes on your Windows PC.
If you can’t install iTunes on your Windows PC, or if you see “error 7” or “error 2” after you install the software, follow the steps below in order.
If you see a different error when trying to launch iTunes, follow the steps in iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
Make sure that you're logged in to your computer as an administrator.
If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You can also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8, with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
If you have Windows XP: Choose Open.
If you've previously installed iTunes, the installer will prompt you to repair the software.
After the repair is complete, restart your computer and try launching iTunes.
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
Remove and reinstall iTunes and other software components for Windows XP.
Remove and reinstall iTunes and other software components for Windows Vista, Windows 7, or Windows 8.
Songs you bought from the iTunes Store or imported from CDs are saved in your My Music folder by default. Deleting iTunes won’t delete your music.
Disable conflicting software.
Some background processes can cause issues that prevent applications like iTunes from installing.
If you installed security software and are having issues installing iTunes for Windows, you might need to disable or uninstall security software to resolve the issues.
Restart your computer.
After the restart, and adjusting the software running on your PC, install iTunes again.
Get more help
If the steps in this article don't help you resolve the issue, you might be able to find a solution through a search of the Microsoft support website.
If you receive errors regarding inaccessible registry keys during installation, try the steps found in "Could not open key" message when installing iTunes or Apple components for Windows.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Feb 2, 2015
Have a good weekend!
- Judy

The sound on my iPhone isn't working I tried putting headphones in and it worked, but as soon as I take th out and the sound countinues playing the sound stops help please

The sound on my iPhone isn't working I don't understand why it was working fine an hour ago I haven't dropped it or anything simply just out it on silent... The music I was trying to listen to didn't want to make a sound when I turned it in , I put a pair of headphones in and and it worked as soon as I took it off it completely stopped the music was playing still I could see it in the top column that the play button was on ... Then I made a call an the same thing happened I turned it on speaker and then I could hear them... The sound is completely off even tho i looked at the seettings and put the volume on high noting is sounding on its own not even when i tap the buttons... I took it off the silent before I tried this stuff I don't understand please help !!!

make sure that your head phones are not attached to the phone then use the volume buttons on the side, if when using them you see a pic of headphones on the screen, then you have some lint in the headphone jack, use some compressed air and blow it out.
If you dont see that then try to reset the phone, hold down the home and power buttons for 20 seconds or untill you see the silver apple.
If you are still having a problem restore the phone and set up as new to see if that clears it up.
http://support.apple.com/kb/ht1414

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

Why the 3G connection with Wind don't work on iPhone 4S (iOS 5.0)??

Because Wind is not an officially supported iPhone carrier and Apple warns that using an iPhone on a non-supported carrier's network may mean that some features may not be available or work at all.

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

Logic Pro X records (Audio) all the sounds of my computer when i plug in my guitar!

When i plug in my Guitar (iRig) in my MacBookPro Retina, Logic Pro records all the sounds of my Computer. Even the sounds from itunes. The problem is now, I can`t record more then one track because if i want to play another track over the first one, the sound of the first one is recorded on the second track too!:SSS Help!

http://help.apple.com/logicpro/mac/10/#lgcpbb81aca5
Might want to read the chapter on how to set Logic's audio section for recording.
While you're there read a couple of the chapters on basic recording techniques.

The sound of my computer don't work, help me.

Similar Messages

Maybe you are looking for