The sound on my 5th Generation Ipod has stopped working
So my ipod has the newest software and has been rebooted and all the other "re"s you can think of and yet the sound does not play. The video works fine, and the music says it is playing but no sound will come into my headphones, stereo, or any other way I have tried to connect it to get sound to come out. ANy way to fix without buying a new iPod?
I have the same problem and my nieces ipod fifth gen also lost sound capabilities - Apple should admit to this problem and repair them for free!!!!
Similar Messages
-
5th generation ipod has 'locked' up!
I don't get it. My ipod, a 5th generation ipod, has a dimly lit screen, it displays "Do Not Disconnect". I have been through the 5 R's on Apples site, to no avail. I cannot get the pod to shut off, or respond in any way. Also, iTunes doesn't even see it. Any help, greatly appreciated.
Personally, I would disconnect and reset while connected to a power outlet (of course you need a wall charger for that). Then if the iPod is seen when you reconnect to the computer reformat it again. If all else fails go to the Apple Store or call Applecare.
-
None of the apps on my 5th Generation iPod touch will open. I have restored it but it still does the same thing. What should I do next?
Try restoring to factory settings (not from backup) and redownloading your content.
-
My Ipod has stopped working properly since the laptop shut down during synching.
My ipod is being slower and wont show any music. when I go into general settings it says the music and videos are loading..
It wont let me into settings all of the time either.
My applications and games have become slow or unresponsive.
The ipod keeps resetting itself, I have tried resetting it to no avail.
I tried plugging it into itunes but it freezes itunes and wont show up on my computer.
When I switch off the ipod it shows a spinning wheel until the battery dies, which could be nearly 2 hours!!
does anyone have any advice as to what to do?
currently ive reset it - nothing has happened
ive let the battery drain itself then recharged it to see if that would make a difference - no difference
Help ASAP neededTry restoring the iPod via iTunes. First from backup and if problem persists, restore to factory defaults/new iPod.
If still problem make an appointment at the Genius Bar of an Apple store. If your iPod is with in the one-year warrranty, not abused and defective Apple will replace it. -
4th Generation iPod: camera stopped working; I touch the icon, the screen goes blank navy blue. What do I do?
Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
I had to restore my iMac from Time Machine. After the restoration all programs are functioning except my Adobe Creative Suite 4 Design Premium. When I start any program in the suite the error message, "Licensing for this product has stopped working." I restarted the computer and tried again to run Photoshop and the same error message appeared. The message was followed by a message that stated that I needed to contact Adobe technical support and mention Error: 150.30. I need Adobe technical support to provide me a solution for my problem so I can continue using my Adobe products installed on my computer.
Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene -
trying to launch photoshop cs3 on a mac running OS10.6.8 i keep getting the error message: Licensing for this product has stopped working you cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT adminstrator or Adobe customer support for help
I already Uninstalled and reinstalled the product and it still does not work.Hi,
Try to uninstall the software again and you have to manually
Delete the following folders:
[Startup Disk]/Library/Application Support/Adobe/Adobe PCD
[Startup Disk]/Library/Application Support/Adobe/caps
[Startup Disk]/Library/Application Support/Adobe/backup
[Startup Disk]/Library/Preferences/FLEXnet Publisher/
[Startup Disk]/Library/Application Support/FLEXnet Publisher/
Go to Applications-->Utilities-->Disk Utility, Open it and Select the MAC HD and then click on Repair permissions.
After that try to run the cleaner tool as mentioned by kglad.
Restart machine and then try to install again.
*** Make sure , you only delete these folders if there is no other adobe applications installed on the machine. As if you have any other Adobe application of the suite ( not free applications ) then it will be a problem. -
I have an Iphone 5 on contract with T-mobile/EE. The lock button on my Phone 5 has stopped working completely. It just will not work anymore so I have to rely on the auto-lock . Will apple replace my phone or do I ahve to take it back to T-mobile? It is just short of a year into a 24 month contract.
Yes; If it's under the one year hard ware warrnety and it doesn't have any damage on the device you can get it replaced, contact Apple ASAP
-
I am running CS6 on a 2014 21" IMac version 10.9.5. I have an earlier version of Illustrator on CS4. When launching the CS4 Illustrator the message says "License for this product has stopped working". What can I do to get this to work?
Mylenium,
Before downloading CS4 again, how do I uninstall the versions that are currently on my Mac?
Many thanks for your help! -
Everytime I send an email the warning box appears--- WebKit2 WebProcess,exe has stopped working. Then I hit close program and it shuts me out of my inbox.
If I don't close the warning box my computer stay s in limbo. What is is? It is not in my control panel and does not come up as a program in my computer.
Help?Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair". -
Why does the sound for my iPad lock and keys stop working
Why o the sounds for my iPad lock and keys stop working?
1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg -
I think the dock on my 5th generation ipod nano is broken. Is there a way that i could fix this?
Every time I try to connect my 5th generation ipod Nano to my computer I get a message that says that the device is unrecognizable. I have tried uninstalling and then reinstalling itunes and I have tried most everything else the Apple Support says to do. I checked my devices on my computer when I had the ipod connected and it said that there was some type of problem with the USB dock on my ipod. other than this I have not had any other problems with this ipod. Is there any way I can fix this without having to get anew ipod?
Have you worked through everything in this article?
iPod nano: Error message saying that iPod 'could not be identified properly'
B-rock -
How do I change the format of my 5th Generation iPod from Windows to Mac
How do I change the format of my 5th Gen iPod from a Windows format to the Mac?
But this will delete all the songs I have? I have a lot of them on my iPod classic
Yes.
I want to transfer (well copy) all my songs from the iPod to itunes on the mac - and then have the itunes library as being placed on the external drive. The last part I think I know, but I can't work out how to copy music from my iPod
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Then see here about backing your iTunes library onto an external hard drive.
iTunes: Back up your iTunes library by copying to an external hard drive
B-rock -
Why did my 4th generation iPod touch stop working with my docking station?
I have an Altec docking station and my iPod suddenly stopped working on it. The station comes on and makes a beeping noise like it is connected when I insert the iPod. However, the music will only come out of the iPod. The docking station will charge the battery on the iPod, so I assume it isn't broken.
- While charging try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try restoring the iPod via iTunes. First from backup and if still problem restore to factory defaults/new iPod.
- However, I really think that the iPod has a hardware problem and an appointment at the Genius Bar of an Apple store is in order. If defective Apple should give you a refurbished iPod. -
Hello.
My favorite browser Safari (5.1.5 ) has stopped working. Yes I know is on a PC. But is been very good to me for a long time, untill about two months ago. I keep getting a pop up message saying "Safari has stopped working" I will close the pop up message and continue working but within a few minute, the message will pop up again. The browser opens up fast as always and runs fine but the message is a pain and annoying. I'm running Firefox now , but I want my Safari back . Please help.
JonasfromdcThanks. b noir. For the quick reply post.
b noir wrote:
Fingers crossed, your Windows 7 will have been recording some additional information about those.
First, open your Action Center and expand "Maintenance". Click "View reliability history":
Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
You should see something that looks like the following screenshot:
Copy and paste the contents of the problem report into a reply here. For example:
Description
Faulting Application Path: C:\Program Files (x86)\Safari\Safari.exe
Problem signature
Problem Event Name: BEX
Application Name: Safari.exe
Application Version: 5.34.55.3
Application Timestamp: 4f6ba239
Fault Module Name: StackHash_7100
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 7d3a1240
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 7100
Additional Information 2: 710027e7a8d30022e5e0ee529f40121f
Additional Information 3: 5158
Additional Information 4: 5158ee4164428f7b514a5e7ee9654f7c
Extra information about the problem
Bucket ID: 2871481836
I generated the problem report similar to the above screen shot " by way of IE 9 " but will not let me copy and paste the contents as a screen shot in reply to your post here . Copy to clipboard did not work either. I might be doing something wrong. Oh well.
By the way , the only difference is- The Problem Event Name of mine is not BEX. but rather : APPCRASH. Fault Module Name : JavaScriptCore.dll. Fault Module Version: 7534.55.2.1. The rest are very similar to the above screenshot. If you need more information then I guess I have to do it all manually. Please let me know. Thanks again.
Jonasfromdc.
Maybe you are looking for
-
Is there a Limit to Numer of events with whihc a reports can be scheduled
Hi Bo Users , Does any body have information about the Events limit . I.e what is the maximum number of events we can assign to a report at time of scheduling . Regards Sapan
-
Swing problem: table is not refreshed when i open it from jdialog
Hi , my situation is this one : 1. i have a swing form. 2. i have created a panel form where i have a drop down list and a table. wich are depndend with each other. When i choose an item to the drop down list the value in the table is changed. 3. i i
-
Backing up 3G so I can put apps and content on my new 3Gs
Hi, I will be getting a new 3GS soon and I was told by the at&t salesperson I can back up my current 3G on my itunes so when I get my new 3GS I can add all the content:music, apps, contacts and so on. Can someone please tell me how to back up my curr
-
Nearest Neighbor Query takes 7 minutes
Hello there, First time poster on the forums. I've been looking into spatial comparison recently and have come across a few problems. The query I run takes 7 minutes to return the nearest neighbor. My table that has the Geographical locations is of
-
What does this console message mean?
I'm getting this cycle of 3 messages, endlessly: 13/08/2010 23:10:05 com.apple.launchd[1] (com.apple.systempreferences.install) Throttling respawn: Will start in 10 seconds 13/08/2010 23:10:15 com.apple.launchd[1] (com.apple.systempreferences.install