The sound on my Presario C700 is very low ? vista-32bit

the sound on my Presario C700 is very low ? vista-32bit

Please check the following link. This should help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00833257&cc=us&dlc=en&lc=en&product=3645867&tmp...
Regards,
Deka
**I work for HP.**Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give a quick thanks.

Similar Messages

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance

Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show

My Ipod, keeps on saying very low battery then restarting. then turning bright with the apple logo and going back to very low battery again.

My Ipod, keeps on saying very low battery then restarting.Then turning bright with the apple logo and going back to very low battery again. HELP PLEASE.. I have plugged it in for 2 hours now.

If you are trying to charge from your computer, try a different USB port, or try charging from a wall outlet.
And try here. Troubleshooting iPhone hardware
Powering Apple and third party peripherals through USB

Just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

This should solve the problem
Settings > General > Reset > Reset All Settings
It will not erase any of your personal data, just reset the settings.
Hope this helps.

I am having problems with the sounds. Please help I am very worried about my iPad 2

I tried restarting my iPad so the sounds would go normal but every time it goes to the homepage it's muted. When I receive a mail it's muted, when I am playing a couple of games it's sometimes muted and when I type it's muted. I checked the settings if it was muted but it was turned off. I imported my headphones and most of the apps I can hear but when I type It doesn't make the sounds. Any ideas to fix the sounds?

Have you got notifications muted ? Only notifications (including games) get muted, so the Music/iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

The sound on my ipad3 has become very distorted and I cannot listen to anything requiring sound. The ipad3 is workeing normally other than the sound.

can anyone help please, turned on my ipad 3 and wanted to listen tomusic,but for some reason the sound has become distorted and impossible to hear music. it was working ok until today, I dont know why it has all gone distorted. help anyone please. Thank you, Marian.

Is it on mute? What IOS do you have?
IOS 7.0+: open control center (swipe from under to top) and tap on the bell.
Or, if it has the lock button instead if the bell, switch the switch on your iPad to unmute / mute
IOS 6 and under: Go to settings>General> USE SIDE SWITCH TO and click mute.
Then switch the switch. You're unmuted.
If it still doesn't work, go to a repair shop or apple so they can change the speakers of your iPad.
~sincerely,
Ab

TS3899 Upgrade to ios6 got the following problems in my ipad2 . Very low download speed. Can not open my apple mail in my iPad.

Upgrade to iOS 6 encountered the following problems in my ipad2.
(1) very low download speed
(2) I can not open my apple gmail in my iPad.
(3) I can't download new apps from Internet.

Have tried your suggestion of toggling but unfortunately that has not solved the problem - but many thanks for the suggestion.
Regards
Sailorfrank

HT1435 hi there i have this problem with my ipod on the second picture which says "Pease Wait Very Low Battery" but it will not charge at all or turn on, sync with computer anybody any ideas.

Hi there I have an ipod classic which will not charge and keeps saying "Please Wait Very Low Battery" can anbody help me its just sad to see it go.

Normally it takes 2 to 4 hours to fully charge an iPod Battery, using a USB2.0 port or wall charger.
Even if the battery is dead, you can have it replaced at Apple Store for about US$60 or at any 3rd Party Ipod Service Center for less.

Bug luminosity very low but the setting is on maximum, bug luminosity very low but the setting is on maximum

I have a buf on Windows 8.1 on my mac with bootcamp
My luminsity is very low but it is set to maximum
can you help me ?

Set adaptive brightness to "off"

Creative Sound Blaster X-Fi Xtreme Audio (PCI-Express) + Vista 32bit an media pla

Hi folks,Maybe someone here can help me with this issue, I recently bought a Creative Sound Blaster X-Fi Xtreme Audio 7. Sound Card - OEM (PCI-Express), it arri'ved with the cd with software and drivers on it and i installed it into my vista 32bit without any problems.On rebooting my sound was working normally and as far as i could tell all was great untill that is i went to play some mp3 using windows media player, wmp kept telling me it couldnt play the file type then i tried to play a wma file an got the same thing, basically almost all audio types will no longer play in wmp. I rolled back the driver to use the microsoft driver (high defination audio device) and everything is playing in media player again.Only now i cant use the software suppiled with the card. Anyone have any idea how to use the creative driver and get wmp to play properly thanks in advance.
(in addition) after some messing around with various settings i discovered that this seems to be caused by the sb enhancements, when i disable them in speaker properties wmp plays as it should, althought i am rather disappointed that i have to disable the features on the card inorder to get it to work properly.

Hi Orion,
You might want to get in touch with support to enquire about the CD.

NO SOUND WITH MY PRESARIO C700

what i can do to find sound with presario c700

Do you have any sound? Do you hear the startup chime? Does iTunes play audio, for example? Is the same true of the built-in speakers and the headphone port? If you use the Accounts System Preference to create a new user and log out and then log in as the new user, does the new user get sound with those applications?
If you "zap the PRAM" you will reset the general system volume, but those applications may each have a volume of their own. If the system volume is up and the application volume is down, you still won't hear anything. You can reset the PRAM by restarting and holding down on the Apple-option-p-r keys all at the same time. Keep holding them down until you hear the startup chime for the third time. Then let go of the keys and allow the iBook to continue starting up.
-Doug

Can you send me the links to instal the drivers of compaq presario c700 for window xp

sir send me the link and details to download these drivers

Hi:
HP does not have an XP download page for the c700.
Please read the XP downgrade guide at the link below for instructions and links to the XP drivers you need for your notebook.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/General-XP-Downgrade-Guide-for-HP-Laptop...
The instructions for the c700 can be found in the section labeled 2. Moderate Models.
Paul

The sound from laptop G72-260us is very poor from some utube and online websites..

I have a G 72-260US. Windows XP ..laptop.added an hp remote keyboard

Hi,
Try the following.
First, download the Flash uninstall utility on the link below and save it to your Desktop.
http://download.macromedia.com/pub/flashplayer/current/uninstall_flash_player.exe
When the download has completed, close all browser windows and run the uninstaller. After this has completed, restart the notebook.
Next, download and install Firefox and then using Firefox, download and install the latest version of Adobe Flash.
Close all browser windows before running the Flash installer.
Launch Firefox and see if the videos play Ok - if they do, close Firefox, open IE and click on the same Adobe Flash link above to get a prompt to install the ActiveX component. When done, restart IE.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Why is the sound on my mac mini server so low (tinny)?

Sorry if this question has been asked before,
and maybe it is a feature that is "undocumented",
but this is the first Mac I've owned ( and I got several)
where the onboard speaker is low and tinny,
even with the volume all the way up.
I had to plug in a pair of old powered compaq speakers
into the headphone jack to get decent sound, comparable to
the onboard speaker of say my G4 MDD 1.0 or even my QS 933,
or my iBook G4 1.25.
Is this natural, or should I be concerned?

It is not a high quality speaker. Low and tiny is it. The mini is just a CPU and Apple expects folks to either pair it with peripherals they already have or buy them separately.
Dah•veed

Performance of the Bex query, buit on infoset is very low

Dear experts,
I have a bex query developed on infoset, has hit the performance problem.
when I am trying to check the query, found warning message as following
Diagnosis
InfoProvider ABC does not contain characteristic 0CALYEAR. The exception aggregation for key figure xyz can therefore not be applied.
System Response
The key figure will therefore be aggregated using all characteristics of ABC with the generic aggregation SUM.
but the infoobject 0CALYEAR is active and is in infoset as an attribute to the one of the Master data infoobject.
Now, could you please help me to improve the performance of the query, which is buit on infoset.
Thanks,
Mannu

Hi,
If Info set is based on Cube then
-->Create Aggregate on the cube for those object used in the Query
-->Compressed the Info Cube
-->then run the query
and also in RSRT there are many properties according to the Target please check which property is suitable for you..
Best Regards
Obaid

The sound on my Presario C700 is very low ? vista-32bit

Similar Messages

Maybe you are looking for